Scribd
Upload
497 views

Structural Analysis and Design Report of Residential Building at Lalitpur Metropolitan City

This structural analysis and design report summarizes the residential building project for Anju Dangol in Lalitpur, Nepal. The 3-story building was modeled and analyzed for dead, live, and seismic loads. Load combinations were considered per building codes. Structural elements like footings, slabs, and staircases were then designed based on the analysis results. Design drawings and calculations are provided to demonstrate structural integrity under expected loads. The report aims to provide assurance that the building is safely designed for its intended residential use.

Uploaded by

Sandip Budhathoki
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
497 views

Structural Analysis and Design Report of Residential Building at Lalitpur Metropolitan City

This structural analysis and design report summarizes the residential building project for Anju Dangol in Lalitpur, Nepal. The 3-story building was modeled and analyzed for dead, live, and seismic loads. Load combinations were considered per building codes. Structural elements like footings, slabs, and staircases were then designed based on the analysis results. Design drawings and calculations are provided to demonstrate structural integrity under expected loads. The report aims to provide assurance that the building is safely designed for its intended residential use.

Uploaded by

Sandip Budhathoki
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Structural Analysis and Design Report

Of
Residential Building at
Lalitpur Metropolitan City

Submitted to:
Lalitpur Metropolitan City
Date: 2075/02/31
TO WHOM IT MAY CONCERN

This report comprises the summary of the Residential building of Anju Dangol. The reports
consist of the design procedures adopted, the assumptions made, the inputs made in the design and
the design output. During the design, it is assumed that the client will completely follow the
architectural as well as the structural design. It is also assumed that the construction will be
supervised by professional engineer.

The designer will not be responsible if any alterations to the structural system is made by the client
or the contractor without the prior written permission from the designer, or the alterations to non-
structural system is made such that the weight of each individual floor or the weight of the whole
building is altered by more than 10% of design weight of each floor and the total weight.

The design calculations and derivations are limited to only a minimum to let the concerned people
know the methodology adopted. However, the calculations may be provided to the client or
concerned authorities when needed, upon request.

…………………………………
Designer
Abinash Neupane
Structure Engineer
Council No: 9518. “Civil” A

Contents
1. Project Detail..........................................................................................5
1.2 Building Design Parameters..................................................................................6
1.3 Materials................................................................................................................6

2|Page
1.3.1 Concrete.........................................................................................................6
1.3.2 Reinforcement................................................................................................6
1.4 Load Calculations.................................................................................................7
1.4.1 Dead Load......................................................................................................7
1.4.2 Superimposed Dead Loads............................................................................7
1.4.3 Live Loads.....................................................................................................7
1.4.4 Seismic Loads................................................................................................7
1.5 Load Combination.................................................................................................9
2. Structural Analysis...............................................................................10
2.1 3D modeling of the building...............................................................................10
3. Design of Elements:..............................................................................19
3.1.1 Sample design of combined Footing...........................................................25
3.1.2 Slab Design..................................................................................................28
3.1.3 Design of Staircase......................................................................................30

1.1

3|Page
Figure 1: Architectural plan of Building.............................................................................5
Figure 2: 3D modeling of the building..............................................................................11
Figure 3: Plan of the building............................................................................................12
Figure 4: Elevation of the building....................................................................................13
Figure 5: Wall load assigned.............................................................................................14
Figure 6: Story Displacement along X-Direction..............................................................16
Figure 7: Story Displacement along Y-Direction..............................................................16
Figure 8: Story Drift along X-Direction............................................................................17
Figure 9: Story Drift along Y-Direction............................................................................17
Figure 10: Bending Moment along grid A-A....................................................................18
Figure 11: Shear Force Diagram along Grid A-A.............................................................18
Figure 12: Reinforcement along grid A-A.........................................................................19
Figure 13: Reinforcement along grid B-B.........................................................................20
Figure 14: Reinforcement along first floor........................................................................20
Figure 15: Reinforcement along second floor...................................................................21
Figure 16: Reinforcement along third floor.......................................................................21
Y
Table 1: Auto Seismic - NBC 105: 1994.............................................................................9
Table 2: Modal Participating Mass Ratios:.......................................................................15
Table 3: Centers of Mass and Rigidity..............................................................................15

4|Page
1. Project Detail

Name of the Project: Residence of Anju Dangol


Location : Lalitpur, Itapukhu
Type of Building: The Building covers a plinth area of Ground floor 344 sq.ft.
The building has been designed for four and half no of stores.
This report has been prepared as a part of the structural engineering analysis and design of
buildings.

5|Page

You might also like