0% found this document useful (0 votes)
135 views5 pages

Design Data: Hostel Building Kaaf Uni Danniel Pascal Stair

This document provides design data for the stairs of a hostel building project. It includes codes and standards, structural loads, materials, stair geometry details, and calculations for reinforcement. The stair has a total going of 2700mm, effective span of 3000mm, total riser of 1500mm, and pitch of 29.05 degrees. Reinforcement calculations determine a required area of 82.53278 mm2 at the first interior support and 67.52682 mm2 near mid-span, to be provided using 10mm bars at 300mm spacing with additional distribution bars. Deflection checks show the design is acceptable.

Uploaded by

DENCO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
135 views5 pages

Design Data: Hostel Building Kaaf Uni Danniel Pascal Stair

This document provides design data for the stairs of a hostel building project. It includes codes and standards, structural loads, materials, stair geometry details, and calculations for reinforcement. The stair has a total going of 2700mm, effective span of 3000mm, total riser of 1500mm, and pitch of 29.05 degrees. Reinforcement calculations determine a required area of 82.53278 mm2 at the first interior support and 67.52682 mm2 near mid-span, to be provided using 10mm bars at 300mm spacing with additional distribution bars. Deflection checks show the design is acceptable.

Uploaded by

DENCO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

DESIGN DATA

Project HOSTEL BUILDING


Client KAAF UNI
Architect DANNIEL
Engineer PASCAL
Element STAIR
Codes 1. The Ghana building regulations
2. BS8110 The structures use of concrete, part 1 1997
3. BS6399 Part 1 1997, part 2 1995, and part 3 1998

Cover
Slab 30 mm
Beam 30 mm
Column 25 mm
foundatio 40 mm
Stairs 30 mm

Loads Dead
Concrete 3.60 KN/m3
Finishes 1.20 KN/m3
Partition 2.00 KN/m3
Roof 2.50 KN/m3

Live
Roof 1.50 KN/m3
Floor 3.00 KN/m3

Material Steel 250 N/mm2


Concrete 30 N/mm2

Soil Bearing Pressure N/mm2

Trial Main 12 mm
Trial Links 8 mm
General Notes
150

1500
1350

480.786
5019
29.05

2700

3000

DESIGN DETAILS
Total going = 2700 mm
Effective Span = 3000 mm
Total Riser = 1500 mm
Landing Beam = 300 mm
Riser = 150 mm
Spread = 1350 mm
number of stairs in flight = 2

Φ = 29.05 °
Pitch is Ok
d= 1314
Slope Length of Stairway = riser  going
2 2

= 3.088689

Average Thickness = 175cosΦ+GoingSinΦ


2
= 480.7865 mm
LOADING
Average Slab Thickness 480.7865 mm
Self Weight 11.53888 KN/m2
Finishes 1.20 KN/m2

Characteristic dead load 12.74 KN/m2


Characteristic Imposed Load 3.00 KN/m2

Design Load. 67.90328 KN

Ultimate Bending Moments


1st Interior Support = 0.11fl = 22.408082 KN/m
Near mid Span = 0.09fl = 18.333885 KN/m

Reinforcement
1st Interior Support Near MidSpan
M M
 0.000433  0.000354
fcubd 2 fcubd 2
z = 0.95 z = 0.95
d d
M M
Ast  = 82.53278 mm2 Ast  = 67.52682 mm2
0.87 fyz 0.87 fyz

Provide Provide
Area 262 Area 262

Bars 10 Bars 10

Spacing 300 Spacing 300

Distribution Bars
0.24bh
 1153.888 mm2
100

Provide
Area 1340
Bars 16

Spacing 150

Deflection Check
basic span/eff depth ratio = 26
M
 0.010619
bd 2
2  fy  Asreq 1
fs   = 42.96
3  Asprov b

from Table 3.10,


= 1.49

Allowable Span/eff depth ratio 38.74


Actual Span/deff ratio 2.283105

DEFLECTION IS OK
2700 2.7
1500 1.5

k k/0.9 0.25 sqrt 0.5+ z


0.000433 0.000481 0.249519 0.499519 0.999519 0.95
0.000354 0.000393 0.249607 0.499607 0.999607 0.95

0.555556

29.0546

0.507099

0.874157 0.485643

152.9775 655.618 327.809

You might also like