Scribd Logo
Upload

Welcome to Scribd!

  • 203 views

    ATC-850 User's Manual

    Uploaded by

    Maitry Shah
    The document summarizes an ATC-850 USB to RS-232/422/485 interface converter. It has the following key details: 1. It allows connection of RS485 industrial buses to a USB interface and is automatically detected as a virtual COM port, compatible with serial applications. 2. It has isolation protection of 3500VRMS and 600W between the USB and RS-232/422/485 ports. 3. It supports operating environments from -25 to 70 degrees C and has LED indicators for transmit/receive data status.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    ATC-850 User's Manual

    Uploaded by

    Maitry Shah
    203 views2 pages
    The document summarizes an ATC-850 USB to RS-232/422/485 interface converter. It has the following key details: 1. It allows connection of RS485 industrial buses to a USB interface and is automatically detected as a virtual COM port, compatible with serial applications. 2. It has isolation protection of 3500VRMS and 600W between the USB and RS-232/422/485 ports. 3. It supports operating environments from -25 to 70 degrees C and has LED indicators for transmit/receive data status.

    Original Description:

    atc

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes an ATC-850 USB to RS-232/422/485 interface converter. It has the following key details: 1. It allows connection of RS485 industrial buses to a USB interface and is automatically detected as a virtual COM port, compatible with serial applications. 2. It has isolation protection of 3500VRMS and 600W between the USB and RS-232/422/485 ports. 3. It supports operating environments from -25 to 70 degrees C and has LED indicators for transmit/receive data status.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    203 views2 pages

    ATC-850 User's Manual

    Uploaded by

    Maitry Shah
    The document summarizes an ATC-850 USB to RS-232/422/485 interface converter. It has the following key details: 1. It allows connection of RS485 industrial buses to a USB interface and is automatically detected as a virtual COM port, compatible with serial applications. 2. It has isolation protection of 3500VRMS and 600W between the USB and RS-232/422/485 ports. 3. It supports operating environments from -25 to 70 degrees C and has LED indicators for transmit/receive data status.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ATC-850 Isolated USB <=> RS-232/422/485 Interface Converter

    Consumption: <200 mA. Isolation: Isolation voltage 3500VRMS 500VDC sequence USB port RS-232/422/485 bus protection: 600W. USB connection: USB -B female connector. 1m USB-A to USB-B cable. RS-232 connector:DB9 male RS-422/485 connector: 6-bit terminal socket Metal case size: 105x85 x27 mm

    Wiring examples
    RS-232 Wiring

    User s Manual

    RS-422 Wiring

    Introduction
    The ATC-850 module is a cost-effective way to convert RS485 industrial buses to a USB interface. When connected to a PC USB port the ATC-850 module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. They have 600W protect between the USB port and RS-232 /422/485 protects. The ATC-850 has a 384 byte receive buffer with an adjustable timeout and a 128 byte transmit buffer with auto-transmit control. The ATC-850 makes it easier to add RS485 devices to your system with easy plug-and-play.

    Operating environment: -25 to 70 !C, 10 to 90% relative humidity, non-condensing.

    Wiring configuration
    The RS-232 termination of the Interface is implemented as a DB9 plug.RS-422/485 termination of the Interface is implemented as a six bit terminal. The pin assignments for the connector can be found in the following table as well as on a sticker applied to the unit. RS-232 Pinout at DB9 Male PIN# RS-232 2 RXD 3 TXD 5 GND 7 RTS 8 CTS RS-422/485 Pinout at 6-bit terminal PIN# RS-422 1 T+ 2 T3 R+ 4 R5 GND RS-485 Wiring

    Check the ATC-850 (Loop Back)


    1. Cross connect the transmit and receive lines for RS-422.For RS-232 only connect TXD.RXD together 2. Connect a PC to the USB Port. 3. Using Hyper Terminal or similar program, connect to the appropriate COM port. Ensure Hyper Terminal local echo RS-485 485+ 485GND is OFF. 4. Transmit data. If the same character string is returned, the test is good.

    Features
    Computer interface: USB 1.1 2.0 Plug and Play. Operational system virtual serial port driver. Supports Windows 98/ME/XP/2000/CE/Vista, MAC & Linux 2.4.20 or superior. Field Interfaces:RS-232,RS-422,RS-485 Half Duplex , Automatic flow control for RS485 Half Duplex. Transmission rate: RS232 from 300 bps to 460.8Kbps. RS485 from 300 bps to 921.6Kbps. Maximum RS-485 cable length : 1200 m Maximum number of devices in the RS485 network: Half Duplex to 32 devices Power: from the USB port.

    LED indication
    Yellow LED ----- Data Sending From USB port to RS-485 Serial Port side Green LED ----Data Receiving from RS-485 Serial port side to USB port Red LED ----Indication power

    4.

    After finishing these processes, you can use USB to Serial Bridge Cable to connect RS232 Serial 56K FAX Modem and execute the Dial-up fuction to connect Internet, and send the FAX with the FAX software(ie: Microsoft FAX) properly.

    Driver Installation
    Follow the steps below to install driver of USB-High Speed Serial Converter: 1. 2. Power on your computer and make sure that the USB port is enabled and working properly. Plug in the USB-High Speed Serial Converter into the USB port continue. 3. Insert the USB-HS Serial Converter software driver into the CD-ROM drive and click Next to continue. For Windows 98, click Search for the best driver for your device and click to search driver from the floppy drive D:\DRIVER\Win98&Win2000. 4. Windows will detect the driver ( FTDIBUS.INF) and shows the USB HS SERIAL CONVERTER . Click Next to continue installation. 5. 6. Click Next to continue and let Windows copy the needed files to your hard disk. When Windows finished installing the software required for the new USB to Serial Cable , click Finish. 1. Turn off your Modem. Plug the DB 9 (or DB 25) connector of the USB-HS Serial Converter into your Modem. Connect the other end of the USB-HS Serial Converter to an USB type A to type B cable. Turn on the Modem afterwards. 2. 3. Turn on your computer and plug in the USB connector of the USB-HS Serial Converter into the USB port. If you have already installed a Modem device before, click Start, Settings, Modems. Open Modems Properties, select the Modem, click Properties. In General tab, please change the Port value to USB Serial Port (COM3). and run the Add New Hardware Wizard to assist you in setting up the new device. Click Next to

    Setting Up the RS232 Serial Device


    Follow the steps below to connect your RS232 Serial Device (ie: Modem) to the USB port of your PC:

    Uninstalling the Driver Program


    If you want to remove the USB-HS Serial Converterr driver program, you can uninstall it by following the steps below: 1. 2. Unplug the USB-HS Serial Converter from your PC. Run the D:\Driver\Win98&win2000\FTDIUNIN.EXE program from the software CD-ROM, Clik finish then reboot the PC.

    You might also like