Scribd
Upload
95 views3 pages

W3100CR User's Manual 2.character of The CDMA Communication

The document provides information about the W3100CR CDMA wireless router, including: 1) It describes the router's CDMA communication capabilities and ability to establish a LAN through a mature CDMA network. 2) It lists the router's features such as transparent data transmission, automatic dialing, and remote access capabilities. 3) It provides instructions on installing and setting up the router, including connecting an antenna and Ethernet cable, installing the SIM card, and using the software to configure network settings.

Uploaded by

Maitry Shah
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views3 pages

W3100CR User's Manual 2.character of The CDMA Communication

The document provides information about the W3100CR CDMA wireless router, including: 1) It describes the router's CDMA communication capabilities and ability to establish a LAN through a mature CDMA network. 2) It lists the router's features such as transparent data transmission, automatic dialing, and remote access capabilities. 3) It provides instructions on installing and setting up the router, including connecting an antenna and Ethernet cable, installing the SIM card, and using the software to configure network settings.

Uploaded by

Maitry Shah
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

W3100CR CDMA ROUTER

Users Manual after dailing the number.

W3100 Serial CDMA Wireless ROUTE

W3100CR Users Manual

2.Character of the CDMA communication:


Support 800, 900/1800MHZ Real time clock The communication effect relies on the construction of the CDMA network Currently, the construction of the CDMA network has got matured. Stable data transmitting; with large quantity and high speed

3.Character of the router:


Transparent data transmission No need of background computer support Automatically dialing after drop from the net Support DMZ NAT router function Establishing a LAN with high speed Conveniently and fluently Easily operated Wakened remotely UDP controlling channels

1. General Description
CDMA 1X is the first phase of CDMA 2000(data rate higher than IS-95, but lower than 2Mbit/s).It runs IP protocol over packet data transmission network and supports up to 308kbit/s data. It is new type of service developed from CDMA IS-95 network to provide packet data. service for CDMA subscribe. The W3100 Series CDMA Wireless Routers are terminal equipments for real time data transmitting through the matured CDMA/GSM network. They can provide standard Ethernet interface and can support the of VPDN/APN with the standard TCP/ IP protocol. Also they can realize the wireless link between the CDMA network and the local area network or the equipments with standard 10BASET interface. Its very easy for medium or small enterprises to establish their long-distance LAN and to share long-distance data through the standard FTP network software. They can be used as the wireless gateway and router between the remote controlling station and the center one , thus making it possible for the mutual accessing among the industrial Ethernet network equipments. They can provide services such as dialing numbers according to the clients demand, closing the net link after receiving the instructions from the center station. taking up the long-distance call,automatically logging on the internet special network

4.Technology standard:
Power Voltage: DC+9V24V. Consumption: Max,300mA@+5VDC;Standby, 120mA@+5VDC Operation temperatue:-1050 Store temperature:-3070

Temperature

RJ45 Interface and CDMA antenna interface TCP/UDP/IP/ICMP/PPP/PAP/DNS protocol agreement Measurement: 103mm 75mm 35mm(not including antenna and fixed parts)

4.1 Interface

W3100CR CDMA ROUTER Antenna: 50P/SMA Female SIM/UIM: 3V 6.1 Setting of the CDMA SIM/UIM card:

Users Manual

The SIM or UIM card can be inserted or released by pressing the SIM/UIM card drawer button.

Ethernet interface: 10/100BaseT-RJ45 (Auto sense)

5. Indication of W3100CR LED


SIGNAL------It indicates that the CDMA signal is in the normal state if the led flicker regularly.

LAN--------LAN network
WAN----------It shows that the CDMA net has been established, when the led is on, and when the net drop, the led is off. POWER---------Indication of Power

6.2 Install the router


Using a cross-Through cable to connect the Ethernet card with RJ45 interface of W3100CR. Or connect to switcher or HUB use straight-Through Cable.

6.3 Connecting the antenna with the router. 6.4 POWER led is on,it means power suplly is normal and the router runs 5.1 DIP-Switch Setup
If you want to return all the W3100CRs current settings to its factory default.Please use it. DIP Switch1 turn up ON dropping back into factory default parameter. Then turn down OFF running normally. If you changed the local IP address and forget it, you dont know which gateway your router is in,you cant enter the configuration software, please use DIP Swith1. Turn up it,it will get back to 192.168.1.254. DIP Switch2, Switch3, Switch4 doesnt use now

normal;LAN led is on,it means LAN connected;WAN led is on,it means Internet connected;SIGNAL led flikered regularly,it means CDMA net is normal.

7. Parameter configuration of the router


Set up the configuration software that our company provide in the CD.Connect the W3100CR with your PC. Before set the W3100CR,first of all, keep your computer and the W3100CR

is in the same gateway, (W3100CR default address is 192.168.1.254) . And the

6. Installation and setting of the W3100CR


10/100M,or 1000M)

wireless router

subnet mask is 255.255.255.0. follow picture:

Open the software, the interface is like the

LAN: every PC in the LAN should have Ethernet card.(10M,100M or

The TCP/IP protocol in the operating system is required

W3100CR CDMA ROUTER

Users Manual

Click the search device ,in the left side, there is a IP address which is

routers local IP address. Then click the IP address. The interface is like the follow:

MAC: hardware ID,you can write it in according to your need. Dialer number: dont change it, except it our engineers advice. PAP/CHAP: put in 0 means PAP mode, put in 1 means CHAP. MTU: advise you to choose a number:1200-1500, if you cant browse the web or the speed on internet is slow,you can try 0,1490,1492 . Local IP:you can set it same as your LAN gateway address. No data Line-off: if there is no data to trasmit,the CDMA network will be off . Check Circle: the time of checking the CDMA network. Default time is 5 min. Restart Circle: keep default time. Wan IP: if the router is online,it will get the Wan IP automatically. First DNS and Second DNS: keep them same as your PCs DMZ IP: address of the pc Click the confirm,entre the configuration interface. User name and Password: keep it default.

You might also like