BASIC MECHANICAL ENGINEERING

FOR CIVIL ENGINEERS

Subject code: CE402ES

Regulations: R18-JNTUH
Class: II Year B. Tech CE II Sem

DEPARTMENT OF CIVIL ENGINEERING

BHARAT INSTITUTE OF ENGINEERING AND TECHNOLOGY
Ibrahimpatnam - 501 510, Hyderabad
 BASIC MECHANICAL ENGINEERING FOR CIVIL ENGINEERS
(CE402ES)
COURSE PLANNER

I.COURSEOVERVIEW:
After learning the course the students should be able to
 To understand the fundamentals of mechanical systems.
 To understand and appreciate significance of mechanical engineering in
different fields of engineering.

II.COURSEOBJECTIVES:
1. Basic machine elements,

2. Sources of Energy and Power Generation,

3. Various manufacturing processes,

4 Power transmission elements, material handling equipment.

III.COURSEOUTCOMES:
.No Description Bloom’s Taxonomy Level

1. Understand To understand the mechanical equipment for

the usage at civil engineering systems, Understand (Level 2)

2. Analyze To familiarize with the general principles and

requirement for refrigeration ,manufacturing, Analyze (Level 4)

3. Apply To realize the techniques employed to construct

civil engineering systems. Apply (Level 3)

IV.HOW PROGRAM OUTCOMES AREASSESSED:

 Proficiency
Program Level
assessed by
Outcomes (PO)
Engineering knowledge: Graduates will demonstrate the
PO1 ability to use basic knowledge in mathematics, science and 1.66 Assignments
engineering and apply
them to solve problems specific to mechanical engineering.
Problem analysis: Graduates will demonstrate the ability to
PO2 design and conduct experiments, interpret and analyze data, 0.66 Assignments
and report
results.
Design/development of solutions: Graduates will
PO3 demonstrate the
ability to design any mechanical system or thermal that meets
desired specifications and requirements.
Conduct investigations of complex problems:
PO4 0.66 Assignments
Graduates will
demonstrate the ability to identify, formulate and solve
mechanical engineering problems of a complex kind.
Modern tool usage: Graduates will be familiar with
PO5 applying software methods and modern computer tools to ---
analyze mechanical
engineering problems.
The engineer and society: Apply reasoning informed by the
PO6 contextual know ledge to assesssocietal, health, safety, legal 0.66 Assignments
and cultural issues and the consequent responsibilities
relevant to the
professional engineering practice.
Environment and sustainability: Understand the impact of
PO7 the professional engineering solutions in societal and 0.33 Assignments
environmental contexts, and demonstrate the knowledge of,
and need for sustainable
development.
Ethics: Apply ethical principles and commit to professional
PO8 -- ---
ethics
and responsibilities and norms of the engineering practice.
Individual and team work: Graduates will demonstrate the
PO9 ability to function as a coherent unit in multidisciplinary -- ---
design teams, and
deliver results through collaborative research.
Communication: Communicate effectively on complex
engineering activities with the engineering community and
PO10 with society at large, such as, being able to comprehend and -- ---
write effective report sand
design documentation, make effective presentations, and
give and receive clear instructions.
 Project management and finance: Graduate will be able to
design a system to meet desired needs within environmental,
PO11 economic, political, ethical, health and safety, -- ---
manufacturability and management knowledge and
techniques to estimate time, resource to
complete project.
Life-long learning: Graduates should be capable of self-
PO12 -- --
education and clearly understand the value of life-long
learning.
1: Slight 2: Moderate 3:
- : None
(Low) (Medium) Substantial
(High)
V.HOW PROGRAM SPECIFIC OUTCOMES AREASSESSED:
Proficiency
Program Specific Outcomes (PSO) Level
assessed by
Foundation of mathematical concepts: To use
PSO1 mathematical methodologies to crack problem using 1 Reaseach
suitable mathematical
analysis, data structure and suitable algorithm.
Foundation of Mechanical System: The ability to
interpret the fundamental concepts and methodology of
PSO2 Mechanical systems. Students can understand the --
--
functionality of different machine, men and material.
Layout of plant: The ability to grasp the knowledge of
PSO3 plant -- ---
layout and material handling along with the systematic
allocation of all the facilities.

1: Slight 2: Moderate 3: Substantial

- : None
(Low) (Medium) (High)

VI. SYLLABUS:JNTUH:

UNIT - I: Machine Elements: Cams: Types of cams and followers Introduction to engineering
materials-Metals, ceramics, composites-Heat treatment of metals Riveted joints- methods of
failure of riveted joints-strength equations-efficiency of riveted joints eccentrically loaded
riveted joints.
UNIT - II: Power Transmission Elements: Gears terminology of spur, helical and bevel gears,
gear trains. Belt drives (types). Chain drives. Material Handling equipment: Introduction to Belt
conveyors, cranes, industrial trucks, bull dozers
UNIT - III: Energy: Power Generation: External and internal combustion engines (layouts,
element/component description, advantages, disadvantages, applications). Refrigeration:
Mechanical Refrigeration and types – units of refrigeration – Air Refrigeration system, details
and principle of operation –calculation of COP Modes and mechanisms of heat transfer – Basic
laws of heat transfer –General discussion about applications of heat transfer.
UNIT - IV: Manufacturing Processes: Sheet Metal Work: Introduction – Equipments – Tools
and accessories – Various processes (applications, advantages / disadvantages). Welding: Types
– Equipments –Techniques employed –welding positions-defects-applications, advantages /
disadvantages – Gas cutting – Brazing and soldering. Casting: Types, equipments, applications
UNIT - V: Machine Tools: Introduction to lathe, drilling machine, milling machine, grinding
machine-Operations performed
SUGGESTED BOOKS:
TEXT BOOKS:
1. Kumar, T., Leenus Jesu Martin and Murali, G., Basic Mechanical Engineering, Suma
Publications, Chennai, 2007M
2. Basic Mechanical Engineering / Pravin Kumar/ Pearson
3. Introduction to Engineering Materials / B.K. Agrawal/ McGrawHill
4. Thermal Engineering-M.L.Marthur& Mehta/Jainbros
5. Thermal Engineering-R.S Khurmi/JSGupta/S.Chand.
REFERENCE BOOKS:
1. Prabhu, T. J., Jai Ganesh, V. and Jebaraj, S., Basic Mechanical Engineering, SciTech
Publications, Chennai, 2000
2. Hajra Choudhary, S.K. and Hajra Choudhary, A. K., Elements of Workshop Technology
Vols. I & II, Indian Book Distributing Company Calcutta, 2007.
3. Nag, P.K., Power Plant Engineering, Tata McGraw-Hill, New Delhi, 2008.
4. Rattan, S.S., Theory of Machines, Tata McGraw-Hill, New Delhi, 2010.
NPTEL WEB COURSE:
nptel.ac.in/downloads/112107219/
NPTEL VIDEO COURSE:
nptel.ac.in/downloads/112107219/#
GATE:NA
IES :NA

VII.COURSEPLAN:
Lectu Un Topic Teaching
We Topics to be
re it Date Learning Methodol Reference
ek covered
No. No Outcome ogy

Explain 1. Kumar, T.,

12/18/2 Machine working Chalk and Leenus Jesu Martin
1 I
019 Elements: Cams priciple Talk,PPT and Murali, G.,
1 of cam Basic Mechanical
Engineering, Suma
12/20/2 Types of cams and Recall Chalk and
2 I various Publications,
019 followers Talk,PPT
types Chennai, 2007
 cams 2. Basic
Mechanical
Engineering /
Introduction to Identify Pravin Kumar/
12/21/2 engineering the Chalk and Pearson
3 I
019 materials-Metals, various Talk,PPT 3. Introduction to
ceramics, materials Engineering
Materials / B.K.
Femilari Agrawal/
Composites-Heat ze the McGrawHill
12/27/2 Chalk and
4 I treatment of heat treat
019 Talk,PPT
metals ment
process
2 Distigus
h
12/28/2 between Chalk and
5 I Riveted joints
019 various Talk,PPT
types
joints

Identify
the types
12/03/2 Methods of failure Chalk and
6 I of failure
019 of riveted joints Talk,PPT
in riveted
3 joints

Determi
12/04/2 ne the Chalk and
7 I Strength equations
019 strength Talk,PPT
of joints

Efficiency of
Determi
riveted joints
01/08/2 ne the Chalk and
8 I eccentrically
020 strength Talk,PPT
4 loaded riveted
of joints
joints. 1. Kumar, T.,
Leenus Jesu Martin
01/10/2
9 I Mock Test – I and Murali, G.,
020
Basic Mechanical
 Recall Engineering, Suma
Power
the Publications,
01/11/2 Transmission Chalk and
10 II Transmis Chennai, 2007
020 Elements:, gear Talk,PPT
sion 2. Basic
trains.
Systems Mechanical
Engineering /
know Pravin Kumar/
the Pearson
01/17/2 Gears terminology Chalk and
11 II terminolo
020 of spur gear Talk,PPT
gy of
gears
5
know
the
01/18/2 Helical and bevel Chalk and
12 II terminolo
020 gears Talk,PPT
gy of
gears

Identify
various
01/22/2 Belt drives Chalk and
13 II types of
020 (types). Talk,PPT
belt
drives

Recall
the
241-01- various Chalk and
14 II Chain drives
2020 types of Talk,PPT
6
chain
drives

Identify
Material Handling the types
equipment: of
01/25/2 Chalk and
16 II Introduction to Material
020 Talk,PPT
Belt conveyors, Handling
cranes, equipmen
t:

01/29/2 Belt conveyors, Identify Chalk and

17 7 II the types
020 cranes, Talk,PPT
of
 Material
Handling
equipmen
t:
1. Thermal
Identify Engineering-
the types M.L.Marthur&
of Mehta/Jainbros
01/31/2 Industrial trucks, Chalk and 2. Thermal
18 II Material
020 bull dozers Talk,PPT Engineering-R.S
Handling
equipmen Khurmi/JSGupta/S.
t: Chand.

02/01/2 Tutorial / Bridge Chalk and

19 II
020 Class # 1 Talk,PPT

Familiar
ize with
Energy: Power the
Generation: general
External principles
02/05/2 Chalk and
20 III combustion and
020 Talk,PPT
engines (layouts, requirem
element/compone ent for
nt Power
generatio
n

8 Explain
Description,
working
02/07/2 advantages, Chalk and
21 III principle
020 disadvantages, Talk,PPT
of
applications).
engines

Internal
combustion Discuss
engines(layouts, about
02/08/2 element/compone Chalk and
22 III elements
020 nt Talk,PPT
of IC
description,),Adva engines
ntages,
disadvantages,
 applications

MID-I EXAMINATIONS (10/2/2020 - 12/02/2020)

Refrigeration: Familiar
Mechanical ize with
02/11/2 Chalk and
23 III Refrigeration the 3 Nag, P.K.,
020 Talk,PPT
,types – units of general Power Plant
refrigeration principles Engineering,
Tata McGraw-
Determi Hill, New Delhi,
Air Refrigeration 2008.
ne the
system, details and
02/12/2 COP of Chalk and
24 III principle of
9 020 air Talk,PPT
operationcalculati
refrigerat
on of COP
ion sstem

Recall
the
Modes and
02/15/2 various Chalk and
25 III mechanisms of
020 heat Talk,PPT
heat transfer
transfer
modes

Recall
the
02/19/2 . Basic laws of various Chalk and
26 III
020 heat transfer heat Talk,PPT
transfer
10 modes

Identify
General discussion the
02/22/2 Chalk and
27 III about applications applicatio
020 Talk,PPT
of heat transfer s of heat
transfer

02/26/2 Tutorial / Bridge

28 III
020 Class # 2
11
02/28/2 Manufacturing Discuss Chalk and
29 IV
020 Processes: Sheet the Talk,PPT
 Metal Work: manfactu
Introduction – ring
Equipments process 1.Kumar, T.,
Leenus Jesu
Recall Martin and
the Murali, G., Basic
Mechanical
various
02/29/2 Tools and Chalk and Engineering,
30 IV tools for Suma
020 accessories Talk,PPT
sheetmet Publications,
al Chennai, 2007M
operation

List out
Various processes
the
03/04/2 (applications, Chalk and
31 IV manfactu
020 advantages Talk,PPT
ring
disadvantages).
process

Recall
Welding: Types – the
Equipments – various
03/06/2 Chalk and
32 12 IV Techniques joints &
020 Talk,PPT
employed – its
welding positions working
principle

Recall
Defects,
the
03/07/2 applications, Chalk and
33 IV applicatio
020 advantages / Talk,PPT
n of
disadvantages
welding

Discuss
the
working
Gas cutting –
03/11/2 principle Chalk and
34 13 IV Brazing and
020 of Talk,PPT
soldering
Various
operation
s
 Explain
Casting: Types, the
03/13/2 Chalk and
35 IV equipments, working
020 Talk,PPT
applications principle
of casting

03/14/2
36 IV Mock Test – II
020

Discuss
the
03/18/2 Machine Tools: Chalk and
37 V various
020 Introduction Talk,PPT
operation
s

Summar Hajra Choudhary,

ize S.K. and Hajra
03/20/2 working Chalk and Choudhary, A. K.,
38 V Lathe machine
14 020 principle Talk,PPT Elements of
of lathe Workshop
machine Technology Vols. I
& II, Indian Book
Summar
Distributing
ize
Company Calcutta,
03/21/2 Lathe machine- working Chalk and
39 V 2007
020 operations principle Talk,PPT
of lathe
machine

Discuss
the
working
03/25/2 Drilling machine Chalk and
40 V principle
020 operations Talk,PPT
of
Drilling
15
machine

Discuss
03/27/2 Milling machine the Chalk and
41 V working
020 operations Talk,PPT
principle
of
 Milling
machine

Explain
the
working
03/28/2 Grinding machine Chalk and
42 V principle
020 operations Talk,PPT
of
Grinding
machine

04/01/2 Tutorial / Bridge

43 V
020 Class # 3

Identify
the
various
04/03/2 Operations oprations Chalk and
44 16 V
020 performed for Talk,PPT
different
applicatio
n

04/04/2 Chalk and

45 V Revision
020 Talk,PPT

MID-II EXAMINATIONS (08/4/2020 - 11/4/2020)

VIII.MAPPING COURSE OUTCOMES LEADING TO THE

ACHIEVEMENT OF PROGRAM OUTCOMES AND
PROGRAM SPECIFICOUTCOMES:
Program Program Specific
Outcomes Outcomes
 PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3

CO1 3 - - - - 1 - - - - - - 1 -

CO2 1 2 - - - 1 - - - - - - - 1 -

CO3 1 - - 2 - - 1 - - - - - - 1 -

AVG 1.66 0.66 - 0.66 - 0.66 0.33 - - - - - - 1 -

IX.QUESTION BANK
UNIT-I
SHORT ANSWER QUESTIONS:
S.No Question Blooms Course
Taxonomy Outcomes
Level
1. Define Cam? Remember
1,2
2. What are the various types of cam? Remember 1,2
3. Define composite? Remember
2
4. Distinguish between composite & alloy? Remember
2
5. What is mean by eccentric loading? Remember
2
6. Recall the types of ceramics? Remember
2
7. What are the heat treatment methods? Remember
2
LONG ANSWER QUESTIONS:
S.No Question Blooms Course
Taxonomy Outcomes
Level
1. What are the types of failure of riveted joints ?
Analyze 2
2. Identify the various Heat treatment methods for metals ? Analyze
2
3. Explain the types of cams and followers with neat sketch?
Understand 1,2
4. Discuss the eccentrically loaded riveted joints? Evaluate
2
5. Briefly explain about strength and efficiency of riveted
Understand 2
joints?
6 Compare the ceramics and composites?
Understand 2
UNIT-II
SHORT ANSWER QUESTIONS:
S. Question Blooms Course
No Taxonomy Outcomes
Level
1. What are the power transmission elements? Remember 1
2. State the advantage of chain drive? Remember 1
3. Types of gears? Remember 1
4. What are the material handling devices? Understand 1
5. Types of belt drives? Remember 1
6. Difference between helical and spur gear? Understand 1
7. Define gear trains? Remember 1
8 What type of material used for convyers? Understand 1
9 Types of cranes? Remember 1
10 What is mean by creep of the belt? Remember 1
11 Define term slip of the belt? Remember 1

LONG ANSWER QUESTIONS:

S.N Question Blooms Course
o Taxonomy Outcomes
Level
1. Detail discussion of Gears terminology with neat Understand
1&2
sketch?
2. Explain the material handling systems in Understand
industries with suitable examples? 1

3. What are types belt drives? Compare the various belt Analyze
1
drives?
4. What re advantages & disadvantages of belt drives? Understand 1
5. Distinguish between spur, helical & warm gear? Understand
1
6. Compare belt drives and chain drives? Analyze
1

UNIT-III

SHORT ANSWER QUESTIONS

S. Question Blooms Course
No Taxonomy Outcomes
Level
1. Advantages of Refrigeration Remember 2
2. Applications of IC engines? Understand 2
3. What are the modes of heat transfer? Remember 2
4. Define conduction ? Remember 2
5. Define conevection ? Remember 2
6. Define radiation? Remember 2
7. What is Mechanical Refrigeration and its types? Remember 2
8. Define Unit of refrigeration and C.O.P Remember 2
9. Explain the term “Ton of refrigeration” Understand 2
10 Define Refrigeration Remember 2
11 State the term of heat transfer? Remember 2

LONG ANSWER QUESTIONS:

S. Question Blooms Course
NO Taxonomy Outcomes
Level
Distinguish between External and internal combustion Analyze
1. engines ? 1,2
2. What is the necessity and application of refrigeration systems Understand 2
Explain the principle of working of Bell Coleman cycle Understand 2
3.
Write the short note on Refrigeration needs of Air crafts. Understand 2
4.

5. List the various components of IC engines.

Understand 2
6. Briefly explan the applications of heat transfer? Understand 2
7. Discuss the principle of operation and calculation of COP?
Remember 2
8. What are modes of heat transfer and explain with examples? Remember 2

UNIT-IV

SHORT ANSWER QUESTIONS

S.No Question Blooms Course
Taxonomy Outcomes
Level
1. What are the tools used for sheet metal operation? Remember 2
2. Types of welding? Remember 2
3. What are demerits of welding?
Remember 2
4. What are the applications of welding? Remember 2
5. List out components in brazing ? Understand 2
6 What are elements in soldering opweration? Understand 2
7 Identify the defects of welding?
Remember 2
8 List out applications of casting?
Remember 2
 9 Types of casting?
Remember 2
LONG ANSWER QUESTIONS:
S.No Question Blooms Course
Taxonomy Outcomes
Level
1. what are the advantages & disadnatages of Manufacturing Understand
1,2
Processes
2. Discuss the types of Casting and its applications? Understand 2
3. Explain working principle of gas cutting? Understand 2
4. Summarize the term of brazing equipment with neat Understand
2
sketch?
5. List out welding positions and its defects ? Understand 2
6. Differentiate between Brazing and soldering ? Analyze 2
7. Advantages & disadvantages of welding? Understand 2
UNIT-V

SHORT ANSWER QUESTIONS

S.No Question Blooms Course
Taxonomy Outcomes
Level
1. What are the various machining operations? Understand 1,2,3
2. Types of lathe machines? Remember 2,3
3. Types grinding machines? Remember 2,3
5. Types of milling machines? Remember 2,3
6. List out applications of machining operations? Remember 2,3
7. What is necessity of machining in industries? Remember 2,3
8 What type of tool material is used marching operations? Analyze 2,3
LONG ANSWER QUESTIONS:
S.No Question Blooms Course
Taxonomy Outcomes
Level
1. Briefly summarize the functioning of lathe machine and its Understand 1,2,3
types?
2. Explain the Working principle of milling machine with Understand 2,3
neat sketch?
3. Discuss the Working principle of grinding machine with Understand 2,3
neat sketch
4. Distinguish between horizontal & vertical lathe machine? Analyze 2,3

5 What are advantages and disadvantages of machining Understand 2,3

operations?
6 What is mean by drilling and how it can helpful in analyze 2,3
industries?

X. OBJECTIVE
 QUESTIONS:JNTUH
UNIT-I
1. Define cam _______.
2. Cam size depends upon
a) base circle
b) pitch circle
c) prime circle
d) outer circle.
3. The cam follower generally used in aircraft engines is
a) knife edge follower
b) flat faced follower
c) spherical faced follower
d) roller follower.

4. Which of the following is not a characteristic of ceramics?

a) Non-metallic
b) Inorganic
c) Amorphous
d) None of the mentioned
5. The word ceramic stands for which of the following meaning?
a) Soft
b) Burnt
c) Hard
d) None of the mentioned
6. Which of the following isn’t a main part of rivet?
a) Head
b) Shank
c) Point
d) Thread

7. In hot riveting the shank portion is subjected to compressive stress.

a) True
b) False

UNIT-II
1. Thickness of tooth measured along the pitch circle is known as
a) Tooth thickness
b) Backlash
c) Face width
d) Top land.
2. Difference between space width and to thickness of tooth along the pitch circle is known as
a) Tooth thickness
b) Backlash
c) Face width
d) Top land
3. Length of tooth parallel to gear axis is known as
 a) Tooth thickness
b) Backlash
c) Face width
d) Top land
4. Bottom surface of the tooth between two adjacent fillets is known as
a) Flank
b) Face
c) Bottom Land
d) Fillet
5. Surface of tooth between pitch circle and top land is known as
a) Flank
b) Face
c) Bottom Land
d) Fillet
6. Ratio of speed of the follower to the speed of driving gear is known as
a) Gear ratio
b) Module
c) Velocity ratio
d) None of the mentioned

7. Material handling consists of movement of material from

a)one machine to another

b)one shop to another shop

c)stores to shop

d)all of the above

8. Economy in material handling can be achieved by

a)employing gravity feed movements

b)minimizing distance of travel

c)by carrying material to destination without using manual labour

d)all of the above

9. Fork lift truck is used for

a)lifting and lowering

b)vertical transportation

c)both ‘a’ and ‘b’

d)none of the above

 10.The ratio of driving tensions in V-beltdrives is flat beltdrives.

UNIT-III
1. Define Refrigeration .
2. For obtaining high COP, the pressure range of compressor should be
a)High b)low c)medium d)any value
3. In a refrigeration system, the expansion device is connected between the
a) Compressor and condenser b) Receiver and evaporator

c) Receiver and compressor d)none

4. Metal to metal heat transfer___________ type of heat tansfer

5. Modes of heat transfer____________________________

6. Unit of the rate of heat transfer is

a) Joule
b) Newton
c) Pascal
d) Watt
7. Which of the following generation station has minimum running cost?
a) Thermal power station
b) Hydro-electric power station
c) Nuclear power station
d) None of these
8. How many types of convection process are there?
a) One
b) Three
c) Four
d) Two
9. Thermal conductivity is maximum for which substance
a) Silver
b) Ice
c) Aluminum
d) Diamond
10. Convective heat transfer coefficient doesn’t depend on
a) Surface area
b) Space
c) Time
d) Orientation of solid surface

UNIT-IV
1 Which kind of resistance is experienced in upset butt welding?
a) Electric resistance
b) Magnetic resistance
 c) Thermal resistance
d) Air resistance
2 Which of the following can be easily be welded from flash butt welding process?
a) Tin
b) Lead
c) Cast irons
d) Carbon steel
3 Electrodes used in spot welding are made up of which material?
a) Only Copper
b) Copper and tungsten
c) Copper and chromium
d) Copper and aluminium
4 Which of the following method is not used in applying pressure in spot welding process?
a) Hand lever
b) Foot lever
c) Air pressure
d) Hydraulic cylinder
5 Copper and aluminum can be joined by brazing when _________ alloy is used.
a) Copper-zinc
b) Aluminum-silicon
c) Copper-tellurium
d) Aluminum-zinc
6 Tin-zinc solders are used for joining __________
a) Aluminum
b) Zinc
c) Copper
d) Glass
7 The commonly used flux in brazing is
a)Borax

b)Rosin

c)Lead sulphide

d)Zinc chloride

8 The filler metal used in brazing has melting point of above

a.)250 b)420 c)350 d) 400

9 Write any application of casting___________

10 The pattern used for mass production is
a.)match plate pattern b)split pattern c)skeleton pattern d) single plate pattern

11 Which of the following pattern is used to produce a number of castings?

 a) loose piece pattern
b) split pattern
c) gatted pattern
d) match plate pattern

UNIT-IV
1. Which machine tool is known as the mother machine tool?
a) drill
b) milling
c) lathe
d) none of mentioned
2. Lathe is primarily used for producing ____surfaces.
a) flat
b) curve
c) taper
d) none of the mentioned
3. Which type of surface is produced by turning operation in lathe machine?
a) flat
b) cylindrical
c) taper
d) none of the mentioned
4. Lathe cannot produce internal features like holes.
a) true
b) false
5. Shaping can be performed more effectively by ______ milling machine.
a) horizontal
b) vertical
c) can’t say anything
d) none of the mentioned
6. surfacing can be performed more effectively by ______ milling machine.
a) horizontal
b) vertical
c) can’t say anything
d) none of the mentioned
7. Form cutting can be performed more effectively by ______ milling machine.
a) horizontal
b) vertical
c) can’t say anything
d) none of the mentioned
8. Which of the following operation, we can’t perform on drilling machine?
a) reaming
b) tapping
c) lapping
d) none of the mentioned
9. Tapping attachment is included in_______ method of tool holding devices.
a) by chucks
b) by a sleeve
 c) by directly fitting in the spindle
d) none of the mentioned
10. Removing dull grains in order to make grinding wheel sharp is known as
a) Loading
b) Glazing
c) Dressing
d) Trueing
11. We can’t perform grinding operation in a drilling machine.
a) true
b) false
12. In drilling operation, work should be held by hand.
a) true
b) false
XI. GATEQUESTIONS:
NA
XII. WEBSITES:
1. www.iitd.ac.in
2. www.nptel.ac.in
3. www.mit.edu
XIII. EXPERTDETAILS:
1. Dr.PravinKumar
2. K. Agrawal/ McGrawHill
3. Meenakshi/AnjaliBagad.
XIV. JOURNALS:
1. ASME Journal of Energy Resource Technology
2. ASME Journal of Engineering for Industry
3. ASME Journal of Solar Energy Engineering
4. Australian Journal of Mechanical Engineering

XV. LIST OF TOPICS FOR STUDENTSEMINARS:

1. Refrigeration.
2. Machine Tools
3. Engineeringmaterials.
4. I.CEngines.

XVI. CASE STUDIES / SMALLPROJECTS:

1. Material Handling equipmen