Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    05 Trip Sheet - IPM - Quartz

    Uploaded by

    Rebar
    This document provides instructions for completing a trip sheet during a well trip. It explains: 1) The trip sheet is used to record fluid volumes used while tripping drill pipe in or out of the well. 2) Seven columns are used to track fluid displacement calculations, measured fluid volumes pumped, and any discrepancies between calculated and measured volumes. 3) The trip sheet allows tracking of total fluid gains or losses from the start of the trip.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    05 Trip Sheet - IPM - Quartz

    Uploaded by

    Rebar
    82 views7 pages
    This document provides instructions for completing a trip sheet during a well trip. It explains: 1) The trip sheet is used to record fluid volumes used while tripping drill pipe in or out of the well. 2) Seven columns are used to track fluid displacement calculations, measured fluid volumes pumped, and any discrepancies between calculated and measured volumes. 3) The trip sheet allows tracking of total fluid gains or losses from the start of the trip.

    Original Description:

    trip sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for completing a trip sheet during a well trip. It explains: 1) The trip sheet is used to record fluid volumes used while tripping drill pipe in or out of the well. 2) Seven columns are used to track fluid displacement calculations, measured fluid volumes pumped, and any discrepancies between calculated and measured volumes. 3) The trip sheet allows tracking of total fluid gains or losses from the start of the trip.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    82 views7 pages

    05 Trip Sheet - IPM - Quartz

    Uploaded by

    Rebar
    This document provides instructions for completing a trip sheet during a well trip. It explains: 1) The trip sheet is used to record fluid volumes used while tripping drill pipe in or out of the well. 2) Seven columns are used to track fluid displacement calculations, measured fluid volumes pumped, and any discrepancies between calculated and measured volumes. 3) The trip sheet allows tracking of total fluid gains or losses from the start of the trip.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 7

    Ref.

    : HQ-PO-TRN-01

    Page: 1 of 7
    WELL CONTROL MANUAL
    Issued:

    Revision: 3.0

    TRIP SHEET

     Column 1: This is the stand list as numbered when racked in the derrick. 
    Record single stands for the first 5 stands under normal 
    circumstances.  Then record every 3 to 5 stands.

     Column 2: Note the trip tank gauge reading.  The difference in reading 
    after an increment will be the measured amount of mud used
    to fill the hole for that increment.

     Column 3: The displacement of the number of stands for one increment.

     Column 4: Actual measured amount of mud used to fill the hole for that 
    increment.

     Column 5: Cumulative sum of numbers in column 4.

     Column 6: Results of subtraction of column 3 from column 4.  A negative 
    number here may indicate the hole did not take enough 
    mud (possible swabbing).  A positive number may indicate 
    the hole took too much mud (losses).

     Column 7: Cumulative sum of the numbers in column 6.  This column 
    gives the total amount of fluid swabbed into the hole or the 
    total losses since the beginning of the trip.
    RIG: _______________________ DATE: __________________
    WELL: _____________________ TIME: __________________
    DRILLER: ___________________ DEPTH: __________________

    TRIP SHEET
    REASON FOR THE TRIP: ________________________________________________________
    Number of stands to have top of DC’s one stand below BOP’s:
    _______________________

    Tic Displacement: DC1 DC2 OTHE HWDP DP1 DP2

    PULL  Size
    EVEN l/m or
    Single l/stand
    Double x m or stands
    ÷ 1000 = Vol.
    (m3)

    STAN Trip Calculated Measured Discrepancy Remarks


    Tank Hole fill Hole fill (litres)
    Nb (liters
    )
    Gauge per increment per Accumul. Per Accumul.
    Incremen Incremen
    t t
    1 2 3 4 5 6 7 8
    0
    Note: Units and Calculations are in Metric System.
    STAN Trip Calculated Measured Discrepancy
    D Tank Hole fill Hole fill (litres) Remarks
    Nb. (liters)
    Gauge per increment per Accumul. per Accumul.
    Incremen Incremen
    t t
    1 2 3 4 5 6 7 8

    Note: Units and Calculations are in Metric System.


    RIG: _______________________ DATE: ___________________
    WELL: ______________________ TIME: ____________________
    DRILLER: ____________________ DEPTH: ____________________

    TRIP SHEET
    REASON FOR THE TRIP:
    _____________________________________________________________
    Number of stands to have top of DC’s one stand below BOP’s:
    _______________________

    Tic Displacement: DC1 DC2 OTHE HWDP DP1 DP2


    k R
    PULL  Size
    EVEN bbl/ft or
    Single bbl/stand
    Double x ft or stands
    = Vol. (bbls)

    STAN Trip Calculated Measured Discrepancy


    D Tank Hole fill (bbls) Hole fill (bbls) Remarks
    Nb
    Gauge per increment per Accumul. per Accumul.
    Incremen Incremen
    t t
    1 2 3 4 5 6 7 8
    0
    Note: Units and Calculations are in Oilfield System.
    STAN Trip Calculated Measured Discrepancy
    D Tank Hole fill (bbls) Hole fill (bbls) Remarks
    Nb
    Gauge per increment per Accumul. per Accumul.
    Incremen Incremen
    t t
    1 2 3 4 5 6 7 8

    Note: Units and Calculations are in Imperial System.

    You might also like