Scribd
Upload
49 views

Highway Rules Control System

This document proposes a system to control highway rules and detect speeding and traffic signal breaking vehicles in India. The system uses infrared sensors to measure vehicle speed and RFID tags to identify vehicles. If a vehicle is speeding or breaks a traffic signal, the system will fine the owner Rs. 5 by sending an SMS notification. The objectives are to reduce accidents from speeding and breaking traffic rules and increase transparency by automating the enforcement system.

Uploaded by

vaibhav gaje
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Highway Rules Control System

This document proposes a system to control highway rules and detect speeding and traffic signal breaking vehicles in India. The system uses infrared sensors to measure vehicle speed and RFID tags to identify vehicles. If a vehicle is speeding or breaks a traffic signal, the system will fine the owner Rs. 5 by sending an SMS notification. The objectives are to reduce accidents from speeding and breaking traffic rules and increase transparency by automating the enforcement system.

Uploaded by

vaibhav gaje
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

“HIGHWAY RULES CONTROL

SYSTEM
FOR
DIGITAL INDIA”
GAJE VAIBHAV N. B120103807
KALE PRASHANT M. B120103816
KASAR NIKHIL S. B120103818
SHETE RAHUL S. B120103836
INTRODUCTION
While driving on highways, motorists should not exceed the maximum speed
limit permitted for their vehicle. However, accidents keep occurring due to speed
violations since the drivers tend to ignore their speedometers.
The aim of this project is to develop a device that detects over speeding of
vehicle on highways and traffic signal breaking detection, also alerts traffic
authorities in case of any speed limit violation.
If any vehicle cross the road during red light then system detect the vehicle as
signal breaker
NEED OF PROJET
Road accidents occurrences have increased recently so there needs to be a system
that allows to detect over speeding cars.
Vehicles which breaks the traffic signal also causes accidents, so proposed
system used for detect that vehicles.
In our country there is also problem of increasing corruption, so as to avoid this
problem this system is very useful.
Proposed system does not need any human interception and records car speed as
well as wirelessly informs authorities of over speed detections.
OBJECTIVE OF PROJECT

To minimize the accidents problem of vehicles which are due to overspeed and
traffic signal breaking.
To minimize the corruption.
To help in traffic management.
To reduce manpower.
Inform to that person who breaks the rule, and punished or debited fine from his
account. Hence transparency in system can be achieved
SYSTEM BLOCK DIAGRAM
SYSTEM WORKING
As first IR is on by crossing of vehicle then counter start counting and when
vehicle crossing second IR sensor then it stops the counter and display speed of
vehicle.
If speed of vehicle is more than certain limit then system read vehicle id by RFID
tag reader and send sms to particular person by gsm and fining him 5rs.
 If vehicle break traffic signal when it is red then RFID detect vehicle id no and
by searching information about him in database it send sms to that person and
fining him 5rs. If person breaks both rule then system fine him 10RS.
ADVANTAGES
All in one user friendly system
Saves human hard work and energy.
Noise free system
It’s less time consuming.
Due to this corruption is less.
Gsm used for sending sms directly to vehicle owner.
Easy to control traffic rules and accidents.
APPLICATION
Smart vehicle speed detection systems.
Traffic signal breaking system.
It will maintain the safety of human life on the road.
Applications in traffic systems (highway electronic toll collection, red light
violation enforcement, border and customs checkpoints, etc.).
It can also be used on the bridge for the control of speed.
It can be used on the highway, express highway.
CONCLUSION
In this paper, we have presented the speeding vehicles are detected using IR
sensor pair which give speed of vehicle. RFID tag reader used for reading vehicle
ID. By using this RFID ID system searches information about that id in database.
The accuracy of the system proposed in the speed measurement is comparable to
the actual speed of the moving vehicles. Speed of vehicle is calculated by
distance and time duration between two IR sensors which they are on bye
vehicle.
THANK YOU

You might also like