Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    AD 448 - Support To Profiled Steel Decking, September 2020

    Uploaded by

    symon ellimac
    The document summarizes updates to codes and standards from the British Standards Institution in August 2020, including new and revised British and European standards. Key points include: a revised standard for non-combustibility testing; a new standard for sustainability indicators for buildings and civil engineering; and new work starting on sustainability assessments of construction works and environmental product declarations. It also lists several standards that were reviewed and confirmed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AD 448 - Support To Profiled Steel Decking, September 2020

    Uploaded by

    symon ellimac
    41 views1 page
    The document summarizes updates to codes and standards from the British Standards Institution in August 2020, including new and revised British and European standards. Key points include: a revised standard for non-combustibility testing; a new standard for sustainability indicators for buildings and civil engineering; and new work starting on sustainability assessments of construction works and environmental product declarations. It also lists several standards that were reviewed and confirmed.

    Original Description:

    AD 448 - Support to profiled steel decking, September 2020

    Original Title

    AD 448 - Support to profiled steel decking, September 2020

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes updates to codes and standards from the British Standards Institution in August 2020, including new and revised British and European standards. Key points include: a revised standard for non-combustibility testing; a new standard for sustainability indicators for buildings and civil engineering; and new work starting on sustainability assessments of construction works and environmental product declarations. It also lists several standards that were reviewed and confirmed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views1 page

    AD 448 - Support To Profiled Steel Decking, September 2020

    Uploaded by

    symon ellimac
    The document summarizes updates to codes and standards from the British Standards Institution in August 2020, including new and revised British and European standards. Key points include: a revised standard for non-combustibility testing; a new standard for sustainability indicators for buildings and civil engineering; and new work starting on sustainability assessments of construction works and environmental product declarations. It also lists several standards that were reviewed and confirmed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Advisory Desk / Codes and Standards

    AD 448: Support to profiled steel decking


    It is now over ten years since the in to the column web.
    Shelf angle or plate required
    revised edition of P300 was published The BCSA Group has added some
    by SCI. This work, in collaboration detail to this requirement, based on
    with the Metal Cladding and Roofing the fact that decking is effectively
    Manufacturers’ Association (MCRMA), one-way spanning and so noting that:
    benefitted from considerable • Up to 250 mm is acceptable as a
    practitioner input. Since the demise structurally unsupported length
    of the MCRMA’s decking group, along the edge of decking
    more recent practitioner comment • At the ends of the decking this
    on updating the content has come critical dimension should be
    from BCSA’s Cold Formed and Metal reduced to 50 mm
    Decking Group.
    One area where the BCSA Group End and edge supports
    felt it was worth adding some more The BCSA Group confirms that the
    Shelf angles
    detail concerns the support provided guidance given in P300, namely that
    to steel decking around penetrations, Figure 1: Decking penetrated by a ‘wide’ column and requiring additional end support shelf angles should be used, remains
    and at ends and edges. current. Also, as for support around
    they can be included as part of the support. Figure 1 is taken from P300, penetrations, that the shelf angles are
    Support around a penetration shop fabrication and thereby fixed showing a column with a ‘width’ in identified during design and included
    The guidance in P300 says that in a controlled environment rather excess of 250 mm and the decking as part of the shop fabrication.
    flashing should not be used than on-site and potentially working around this column therefore When a soffit is exposed, and so
    to support decking around at height. requiring end support from an angle aesthetics are important, where
    penetrations. Such supports should P300 states that such (structural) fixed to the column web. The figure practical continuous support should
    be provided by shelf angles or support should be provided when also shows shelf angles providing be provided to all ends and edges.
    similar. The BCSA Group confirms this the decking is penetrated by a end support to the decking abutting
    approach, and notes that the need column resulting in a deck edge the beam framing in to the column Contact: Graham Couchman
    for shelf angles should be identified dimension in excess of 250 mm with flange, and edge support to the Tel: 01344 636555
    at the design stage. This will mean no beam underneath to provide decking abutting the beam framing Email: [email protected]

    New and revised codes & standards


    From BSI Updates August 2020

    BS EN PUBLICATIONS BS IMPLEMENTATIONS CORRIGENDA TO BRITISH NEW WORK STARTED


    STANDARDS
    BS EN ISO 1182:2020 BS ISO 21678:2020 EN 15942
    Reaction to fire tests for products. Sustainability in buildings and civil NA+A1:2020 to BS EN 1991-2:2003 Sustainability of construction works.
    Non-combustibility test engineering works. Indicators and National Annex (informative) to BS EN Environmental product declarations.
    supersedes BS EN ISO 1182:2010 benchmarks. Principles, requirements 1991-2:2003, Eurocode 1: Actions on Communication format business-to-
    and guidelines structures. Traffic loads on bridges business
    BS EN ISO 10863:2020
    no current standard is superseded will supersede BS EN 15942:2011
    Non-destructive testing of welds.
    Ultrasonic testing. Use of time-of- BS ISO 22410:2020 EN 15978-1
    BRITISH STANDARDS REVIEWED
    flight diffraction technique (TOFD) Corrosion of metals and alloys. Sustainability of construction works.
    AND CONFIRMED
    supersedes BS EN ISO 10863:2011 Electrochemical measurement of ion Methodology for the assessment
    transfer resistance to characterize the BS EN ISO 9018:2015 of performance of buildings.
    BS EN ISO 19650-5:2020
    protective rust layer on weathering Destructive tests on welds in metallic Environmental Performance
    Organization and digitization of
    steel materials. Tensile test on cruciform will supersede None
    information about buildings and
    no current standard is superseded and lapped joints
    civil engineering works, including ISO 22058
    building information modelling (BIM). BS EN ISO 14919:2015 Construction procurement- guidance
    Information management using Thermal spraying. Wires, rods and on the development of strategy and
    PUBLISHED DOCUMENTS
    building information modelling. cords for flame and arc spraying. tactics
    Security-minded approach to PD 6705-2:2020 Classification. Technical supply will supersede None
    information management Structural use of steel and aluminium. conditions
    PD 7974-7+A1
    no current standard is superseded Execution of steel bridges conforming
    BS EN ISO 23277:2015 Application of fire safety engineering
    to BS EN 1090-2. Guide
    Non-destructive testing of welds. principles to the design of buildings.
    supersedes PD 6705-2:2010+A1:2013
    Penetrant testing. Acceptance levels Probabilistic risk assessment
    will supersede PD 7974-7:2019
    BS EN ISO 23278:2015
    Non-destructive testing of welds.
    Magnetic particle testing. Acceptance
    levels

    NSC
    28 Sept 20

    You might also like