Unit III Data Analysis and Reporting
Unit III Data Analysis and Reporting
Unit III Data Analysis and Reporting
Introduction
Multivariate means involving multiple dependent variables resulting in one outcome. This
explains that the majority of the problems in the real world are Multivariate. For example,
we cannot predict the weather of any year based on the season. There are multiple factors
like pollution, humidity, precipitation, etc. Here, we will introduce you to multivariate
analysis, its history, and its application in different fields.
In 1928, Wishart presented his paper. The Precise distribution of the sample covariance
matrix of the multivariate normal population, which is the initiation of MVA.
In the 1930s, R.A. Fischer, Hotelling, S.N. Roy, and B.L. Xu et al. made a lot of
fundamental theoretical work on multivariate analysis. At that time, it was widely used in
the fields of psychology, education, and biology.
In the middle of the 1950s, with the appearance and expansion of computers, multivariate
analysis began to play a big role in geological, meteorological. Medical and social and
science. From then on, new theories and new methods were proposed and tested
constantly by practice and at the same time, more application fields were exploited. With
the aids of modern computers, we can apply the methodology of multivariate analysis to
do rather complex statistical analyses.
Multivariate analysis technique can be classified into two broad categories viz., This
classification depends upon the question: are the involved variables dependent on each
other or not?
Interdependence Technique
(1) Data reduction or structural simplification: This helps data to get simplified as
possible without sacrificing valuable information. This will make interpretation easier.
(2) Sorting and grouping: When we have multiple variables, Groups of “similar” objects
or variables are created, based upon measured characteristics.
(4) Prediction Relationships between variables: must be determined for the purpose of
predicting the values of one or more variables based on observations on the other
variables.
Advantages
• The main advantage of multivariate analysis is that since it considers more than
one factor of independent variables that influence the variability of dependent
variables, the conclusion drawn is more accurate.
• The conclusions are more realistic and nearer to the real-life situation.
Disadvantages
Hypothesis testing is used to assess the plausibility of a hypothesis by using sample data.
Such data may come from a larger population, or from a data-generating process. The word
"population" will be used for both of these cases in the following descriptions.
KEY TAKEAWAYS
In hypothesis testing, an analyst tests a statistical sample, with the goal of providing
evidence on the plausibility of the null hypothesis.
Statistical analysts test a hypothesis by measuring and examining a random sample of the
population being analyzed. All analysts use a random population sample to test two different
hypotheses: the null hypothesis and the alternative hypothesis.
The null hypothesis is usually a hypothesis of equality between population parameters; e.g.,
a null hypothesis may state that the population mean return is equal to zero. The alternative
hypothesis is effectively the opposite of a null hypothesis (e.g., the population mean return is
not equal to zero). Thus, they are mutually exclusive, and only one can be true. However,
one of the two hypotheses will always be true.
1. The first step is for the analyst to state the two hypotheses so that only one can be
right.
2. The next step is to formulate an analysis plan, which outlines how the data will be
evaluated.
3. The third step is to carry out the plan and physically analyze the sample data.
4. The fourth and final step is to analyze the results and either reject the null hypothesis,
or state that the null hypothesis is plausible, given the data.
1. Simple Hypothesis:
2. Complex Hypothesis:
4. Null Hypothesis:
5. Alternative Hypothesis:
6. Logical Hypothesis:
7. Statistical Hypothesis:
Developing a hypothesis
1. Ask a question
Writing a hypothesis begins with a research question that you want to answer. The question
should be focused, specific, and researchable within the constraints of your project.
At this stage, you might construct a conceptual framework to identify which variables you
will study and what you think the relationships are between them.
If a first-year student starts attending more lectures, then their exam scores will improve.
The number of lectures attended by first-year students has a positive effect on their exam
scores.
If you are comparing two groups, the hypothesis can state what difference you expect to find
between them.
First-year students who attended most lectures will have better exam scores than those who
attended few lectures.
H0: The number of lectures attended by first-year students has no effect on their final exam
scores.
H1: The number of lectures attended by first-year students has a positive effect on their final
exam scores.
If null hypothesis is true, any discrepancy between If alternative hypothesis is true, the observed
observed data and the hypothesis is only due to discrepancy between the observed data and the
chance. null hypothesis is not due to chance.
There is no association between use of oral There is no association between use of oral
contraceptive and blood cancer contraceptive and blood cancer
H0: µ = 0 HA: µ ≠ 0
3.3 Presenting Insights and findings using written reports and oral presentation.
Overview:
This chapter describes the importance of report preparation and presentation and outlines
the process of producing written and oral presentations. We provide guide- lines for report
preparation, including report writing and preparing tables and graphs, and we discuss oral
presentation of the report. Research follow-up, including assisting the client and evaluating
the research process, is described. The special con- siderations for report preparation and
presentation in international marketing research are discussed, and relevant ethical issues
are identified. We begin with an example of the potential array of reports that can emerge
from a marketing research project that is primarily presenting quantitative findings. This
is followed with an example of a very creative means to present findings to a study that is
primarily pre- senting qualitative findings. Both examples illustrate the different styles and
means to present marketing research reports.
Importance of the report and presentation
For the following reasons, the report and its presentation are important parts of the marketing
research project:
1.They are the tangible products of the research effort. After the project is complete and
management has made the decision, there is little documentary evidence of the project
other than the written report. The report serves as a historical record of the project.
2.Management decisions are guided by the report and the presentation. If the first five steps
in the project are carefully conducted but inadequate attention is paid to the sixth step, the
value of the project to management will be greatly diminished.
3.The involvement of many marketing managers in the project is limited to the writ- ten report
and the oral presentation. These managers evaluate the quality of the entire project on the
quality of the report and presentation.
4.Management’s decision to undertake marketing research in the future or to use the particular
research supplier again will be influenced by the perceived usefulness of the report and the
presentation.
Data analysis
Interpretation, conclusion,
and recommendations
Report preparation
Oral presentation
Research follow-up
The process begins by interpreting the results of data analysis in the light of the
marketing research problem, approach, research design and fieldwork. Instead of merely
summarising the quantitative and/or qualitative analyses, the researcher should present
the findings in such a way that they can be used directly as input into decision-making.
Wherever appropriate, conclusions should be drawn and recom- mendations made. The
researcher should aim to make their recommendations actionable. Before writing the
report, the researcher should discuss the major find- ings, conclusions and
recommendations with the key decision-makers. These discussions play a major role in
ensuring that the report meets the client’s needs and is ultimately accepted. These
discussions should confirm specific dates for the delivery of the written report and other
data.
Report format
Report formats are likely to vary with the researcher or the marketing research firm
conducting the project, the client for whom the project is being conducted, and the nature
of the project itself. Hence, the following is intended as a guideline from which the
researcher can develop a format for the research project at hand. Most research reports
include the following elements:
1 Submission letter
2 Title page
3.Table
of
contents
(a) Main sections
(b) List of tables
(c) List of graphs
(d) List of appendices
(e) List of exhibits
3 Executive summary
(a) Summary of prime objectives
(b) Major findings
(c) Conclusions and recommendations
4 Problem definition
(a) Background to the problem
(b) Statement of the marketing problem
(c) Statement of the research objectives – information needs
6 Data analysis
(a) Research design
(b) Plan of data analysis and means of interpreting results
7 Results
8 Conclusions and recommendations
9 Limitations and caveats
10 Appendices
(a) Letter of authorisation
(b) Questionnaire development and pre-testing
(c) Questionnaires, forms, interview guides
(d) Sampling techniques, including error and confidence levels
(e) Fieldwork
(f) Lists including contact individuals and organisations
This format closely follows the earlier steps of the marketing research process. The results
may be presented in several chapters of the report. For example, in a national survey, data
analysis may be conducted for the overall sample and then the data for each geographic
region may be analysed separately. If so, the results from each analy- sis may be presented in
a separate chapter.
Submission letter. A formal report generally contains a letter of submission that delivers the
report to the client and summarises the researcher’s overall experience with the project,
without mentioning the findings. The letter should also identify the need for further action on
the part of the client, such as implementation of the find- ings or further research that should
be undertaken.
Title page. The title page should include the title of the report, information (name, address
and telephone number) about the researcher or organisation conducting the research, the name
of the client for whom the report was prepared, and the date of release. The title should
encapsulate the nature of the project with a tone that is meaningful to the target managers, not
one of technical ‘research-speak’.
Table of contents. The table of contents should list the topics covered and the appropriate
page numbers. In most reports, only the major headings and subheadings are included. The
table of contents is followed by a list of tables, a list of graphs, a list of appendices and a list
of exhibits.
Executive summary. The executive summary is an extremely important part of the report,
because this is often the only portion of the report that executives read. The summary should
concisely describe the problem, approach and research design that were adopted. A summary
section should be devoted to the major results, conclusions and recommendations. The
executive summary should be written after the rest of the report.
Problem definition. The problem definition section of the report gives the back- ground to
the problem. This part summarises elements of the marketing and research problem diagnosis.
Key elements of any discussions with decision makers, industry experts and initial secondary
data analyses are presented. Having set this context for the whole project, a clear statement of
the management decision problem(s) and the marketing research problem(s) should be
presented.
Approach to the problem and research design. The approach to the problem sec- tion
should discuss the broad approach that was adopted in addressing the problem. This section
should summarise the theoretical foundations that guided the research, any analytical
models formulated, research questions, hypotheses, and the factors that influenced the
research design. The research design should specify the details of how the research was
conducted, preferably with a graphical presentation of the stages undertaken, showing the
relationships between stages. This should detail the methods undertaken in the data
collection from secondary and primary sources. These topics should be presented in a non-
technical, easy-to-understand manner. The technical details should be included in an
appendix. This section of the report should justify the specific methods selected.
Results. The results section is normally the longest part of the report and may entail several
chapters. It may be presented in any of the following ways.
1 Forms of analysis. For example, in a health care marketing survey
of hospitals, the results were presented in four chapters. One
chapter presented the overall results, another examined the
differences between geographical regions, a third presented the
differences between for-profit and non-profit hospitals, and a
fourth presented the differences according to bed capacity. Often,
results are presented not only at the aggregate level but also at the
subgroup (market segment, geographical area, etc.) level.
2 Forms of data collection. For example, a study may contain
significant elements of secondary data collection and analyses, a
series of focus group interviews and a survey. The results in such
circumstances may be best presented by drawing con- clusions
from one method before moving on to another method. The
conclusions derived from focus groups, for example, may need to
be established to show the link to a sample design and questions
used in a survey.
3 Objectives. There may be a series of research objectives whose
fulfilment may incor- porate a variety of data collection methods
and levels of analysis. In these circumstances the results combine
methods and levels of analyses to show connec- tions and to
develop and illustrate emerging issues.
The results should be organised in a coherent and logical way.
Choosing whether to present by forms of analysis, forms of data
collection or objectives helps to build that coherence and logic. The
presentation of the results should be geared directly to the
components of the marketing research problem and the information
needs that were identified. The nature of the information needs and
characteristics of the recipients of the report ultimately determine the
best way to present results.
understands.
In any research project there are many approaches that can be taken to analyse the
data. This can result in a potential over-abundance of data (quantitative and/or quali- tative)
and distilling the ‘meaning’ from the data and presenting this in a clear report can result in
much of the original meaning or richness being lost.3 To maintain the meaning or richness,
the researcher should strive to understand the nature of the decision-making process that is
being supported. Only then can sound interpretations of the collected data be made.
Limitations and caveats. All marketing research projects have limitations caused by time,
budget and other organisational constraints. Furthermore, the research design adopted may be
limited in terms of the various types of errors, and some of these may be serious enough to
warrant discussion. This section should be written with great care and a balanced perspective.
On the one hand, the researcher must make sure that management does not rely too heavily
on the results or use them for unintended purposes, such as projecting them to unintended
populations. On the other hand, this section should not erode their confidence in the research
or unduly minimise its importance.
Appendices. At the end of the report, documents can be compiled that may be used by
different readers to help them to understand characteristics of the research project in more
detail. These should include the letter of authorisation to conduct the research; this
authorisation could include the agreed research proposal. Details that relate to individual
techniques should be included relating to questionnaires, inter- view guides, sampling and
fieldwork activities. The final part of the appendix should include lists of contacts, references
used and further sources of reference.
As a general rule, graphical aids should be employed whenever practical. Graphical display
of information can effectively complement the text and tables to enhance clar- ity of
communication and impact.8 As the saying goes, a picture is worth a thousand words. The
guidelines for preparing graphs are similar to those for tables. Therefore, this section
focuses on the different types of graphical aids.9 We illustrate several of these using the
GlobalCash data from Table 25.1.
Geographic and other maps. Geographic and other maps, such as product posi- tioning
maps, can communicate relative location and other comparative information. Geographic
maps form the bases of presentations in geodemographic analyses as dis- cussed in Chapter
5. The maps used in geodemographic analyses can portray customer locations and types,
potential consumers, location of competitors, road net- works to show consumer flows and
other facilities that may attract consumers to certain locations.
Round or pie charts. In a pie chart, the area of each section, as a percentage of the total
area of the circle, reflects the percentage associated with the value of a specific variable.
Pie charts are very useful in presenting simple relative frequencies in num- bers or
percentages. A pie chart is not useful for displaying relationships over time or
relationships among several variables. As a general guideline, a pie chart should not
require more than seven sections.10 Figure 25.2 shows a pie chart for the sourcing
strategies of European companies. Great care must be taken with 3D pie charts as the
relative sizes of the pie segments become distorted.
Line charts. A line chart connects a series of data points using continuous lines. This is an
attractive way of illustrating trends and changes over time. Several series can be compared on
the same chart, and forecasts, interpolations and extrapolations can be shown. If several series
are displayed simultaneously, each line should have a distinc- tive colour or form.
Oral presentation
The entire marketing research project should be presented to the management of the client
firm. This presentation will help management understand and accept the writ- ten report. Any
preliminary questions that the management may have can be addressed in the presentation.
Because many executives form their first and lasting impressions about the project based on
the oral presentation, its importance cannot be overemphasised.
The key to an effective presentation is preparation. A written script or detailed out- line should
be prepared following the format of the written report. The presentation must be geared to the
audience. For this purpose, the researcher should determine the backgrounds, interests and
involvement of those in the project, as well as the extent to which they are likely to be affected
by it. The presentation should be rehearsed several times before it is made to the management.
Visual aids such as tables and graphs should be displayed with a variety of media. Flip
charts of large pads of blank paper mounted on an easel enable the researcher to manipulate
numbers. They are particularly useful in communicating answers to tech- nical questions.
Visual aids can also be drawn on the pages in advance, and the speaker flips through the
pages during the presentation. Although not as flexible, magnetic boards and felt boards
allow for rapid presentation of previously prepared material. Overhead projectors can present
simple charts as well as complex overlays produced by the successive additions of new images
to the screen. The use of com- puter packages such as Microsoft’s PowerPoint can also be of
immense help. They can be used for making computer-controlled presentations or for
presenting technical information such as analytical models. However, the presenter must not
lose sight of the message, as illustrated in the following two examples.
After the presentation, key executives in the client firm should be given time to read the
report in detail.
Research follow-up
The researcher’s task does not end with the oral presentation. Two other tasks remain. The
researcher should help the client understand and implement the findings and take follow-
up action. Second, while it is still fresh in the researcher’s mind, the entire marketing
research project should be evaluated.