Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Key Features: P1200/Nd Series

    Uploaded by

    Juan Carlos Avila Gonzalez
    This document provides specifications for the Beyma 18P1200Nd loudspeaker. It has a nominal diameter of 460mm and is rated for 1200W of continuous AES power handling. Key features include a 4" laminated voice coil with double insulation, a high stiffness weather resistant paper cone, and an under-pole neodymium magnet topology. Technical specifications include a sensitivity of 98dB, impedance of 8 ohms, frequency range of 25-2000Hz, and maximum displacement of 9.5mm. Dimensions, materials used, frequency and distortion curves, and Thiele-Small parameters are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Key Features: P1200/Nd Series

    Uploaded by

    Juan Carlos Avila Gonzalez
    41 views2 pages
    This document provides specifications for the Beyma 18P1200Nd loudspeaker. It has a nominal diameter of 460mm and is rated for 1200W of continuous AES power handling. Key features include a 4" laminated voice coil with double insulation, a high stiffness weather resistant paper cone, and an under-pole neodymium magnet topology. Technical specifications include a sensitivity of 98dB, impedance of 8 ohms, frequency range of 25-2000Hz, and maximum displacement of 9.5mm. Dimensions, materials used, frequency and distortion curves, and Thiele-Small parameters are also listed.

    Original Title

    18P1200ND

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the Beyma 18P1200Nd loudspeaker. It has a nominal diameter of 460mm and is rated for 1200W of continuous AES power handling. Key features include a 4" laminated voice coil with double insulation, a high stiffness weather resistant paper cone, and an under-pole neodymium magnet topology. Technical specifications include a sensitivity of 98dB, impedance of 8 ohms, frequency range of 25-2000Hz, and maximum displacement of 9.5mm. Dimensions, materials used, frequency and distortion curves, and Thiele-Small parameters are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views2 pages

    Key Features: P1200/Nd Series

    Uploaded by

    Juan Carlos Avila Gonzalez
    This document provides specifications for the Beyma 18P1200Nd loudspeaker. It has a nominal diameter of 460mm and is rated for 1200W of continuous AES power handling. Key features include a 4" laminated voice coil with double insulation, a high stiffness weather resistant paper cone, and an under-pole neodymium magnet topology. Technical specifications include a sensitivity of 98dB, impedance of 8 ohms, frequency range of 25-2000Hz, and maximum displacement of 9.5mm. Dimensions, materials used, frequency and distortion curves, and Thiele-Small parameters are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    18P1200Nd

    18P1200Nd
    P1200/Nd Series

    KEY FEATURES
    • Real 1200 W AES power handling
    • Sensitivity: 98 dB @ 2.83V
    • 4” duo technology voice coil
    • Forced air convection circuit for low power compression
    • Extended controlled displacement: Xmax ± 9.5 mm.
    • Massive mechanical displacement capability: 52 mm p-p

    GENERAL DESCRIPTION
    This model is the result of an extensive and intense research of every single constituent part of an electro-dynamic loudspeaker,
    rethinking the basics and taking care of every detail, to withstand the extreme power conditions it has been designed to work in.
    All this investigation is reflected in the new and innovative technologies developed by Beyma and applied in this new transducer.

    DUO TECHNOLOGY 4” VOICE COIL MOVING ASSEMBLY

    • Laminated former combining two different advanced • High stiffness weather resistant paper cone.
    technology materials to enhance the voice coil life.
    • Beyma Double Conex Spider technology (D.C.S.): the
    • Voice coil winding coiled over the two faces of the former. conex is a fireproof material that insures the preservation
    of the spider mechanical properties under extreme power
    • Double insulation paper (inner and outer) for optimum for- conditions.
    ce transmission.
    • Beyma Mechanical Mirror Suspension System
    • Superficial treatment of the voice coil winding to provide (M.M.S.S.): the diaphragm surround and the double
    further protection to the voice coil wire. spider have been carefully designed with the assistance of
    Finite Element calculations in order to match coherently,
    HEAT DISSIPATION enabling long and controlled cone displacements.

    • Low power compression due to the use of a forced UNDER-POLE NEODYMIUM MAGNET TOPOLOGY
    convection mechanism.
    • F.E.A. optimized under-pole magnet topology. This
    • This design has been optimized with the extensive use of geometry maximizes the flux density in the air-gap and
    miniature high temperature probes and real-time completely eliminate the leakage magnetic field, avoiding
    temperature acquisition systems, together with a thermo- any possible magnetic interference with other equipment.
    graphic camera to obtain real images of the heat
    distribution in the voice coil and forced convection effects. • High temperature neodymium magnets.

    FREQUENCY RESPONSE AND DISTORTION CURVES FREE AIR IMPEDANCE CURVE

    Note: on axis frequency response measured with loudspeaker standing


    on infinite baffle in anechoic chamber, 1w @ 1m.
    056
    18P1200Nd
    18P1200Nd
    P1200/Nd Series

    TECHNICAL SPECIFICATIONS DIMENSION DRAWINGS


    Nominal diameter 460 mm. 18 in.
    Rated impedance 8 ohms
    Minimum impedance 6 ohms
    Power capacity* 1200 w AES
    Program power 2400 w
    Sensitivity 98 dB 2.83v @ 1m @ 2p
    Frequency range 25 - 2000 Hz
    Recom. enclosure vol. 80 / 200 l 2.8 / 7 ft.3
    Voice coil diameter 100 mm. 4 in.
    Magnetic assembly weight 6 kg. 13.2 lb.
    BL factor 26.3 N / A
    Moving mass 0.199 kg.
    Voice coil length 25 mm
    Air gap height 14 mm
    X damage (peak to peak) 52 mm POWER COMPRESSION LOSSES

    6.0
    MOUNTING INFORMATION 5.0

    4.0

    Overall diameter 460 mm. 18.11 in.


    dB

    3.0

    Bolt circle diameter 438 mm. 17.24 in. 2.0


    Baffle cutout diameter: 1.0
    - Front mount 415 mm. 16.34 in. 0.0
    - Rear mount 400 mm. 15.75 in. 100 200 300 400 500 600 700 800 900 1000 1100 1200

    Depth 203 mm. 7.99 in. Power (W)

    Volume displaced by driver 13 l 0.46 ft.3 Note: These losses are calculated from a five minutes AES power
    Net weight 8.5 kg. 18.7 lb. test applying band limited pink noise (50-500 Hz). The loudspeaker
    Shipping weight 10 kg. 22 lb. is free-air standing.

    THIELE-SMALL PARAMETERS** MATERIALS


    • Basket: Cast aluminium
    Resonant frequency, fs 37 Hz
    • Cone: Paper
    D.C. Voice coil resistance, Re 5.3 ohms.
    • Surround: Treated cloth
    Mechanical Quality Factor, Qms 10.39
    • Voice coil: Copper wire
    Electrical Quality Factor, Qes 0.35
    • Magnet: Neodymium
    Total Quality Factor, Qts 0.34
    Equivalent Air Volume to Cms, Vas 198 l
    Mechanical Compliance, Cms 93 mm / N Notes:

    Mechanical Resistance, Rms 4.5 kg / s *The power capacity is determined according to AES2-1984 (r2003) standard.
    Efficiency, ho (%) 2.7 Program power is defined as the transducer’s ability to handle normal music program material.

    Effective Surface Area, Sd (m2) 0.1225 m2 **T-S parameters are measured after an exercise period using a preconditioning power test.
    The measurements are carried out with a velocity-current laser transducer and will reflect the long
    Maximum Displacement, Xmax*** 9.5 mm term parameters (once the loudspeaker has been working for a short period of time).
    Displacement Volume, Vd 1164 cm3 ***The Xmax is calculated as (Lvc - Hag)/2 + Hag/3.5, where Lvc is the voice coil length and Hag is
    Voice Coil Inductance, Le @ 1 kHz 2.3 mH the air gap height.

    Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
    · Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: [email protected] ·
    056

    You might also like