Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Beyma Speakers Data Sheet Low Mid Frequency 15LX60V2

    Uploaded by

    Agus mulyadi
    This document provides specifications for the Beyma 15LX60V2 low frequency transducer. It has a rated impedance of 8 ohms and can handle up to 700 watts of continuous power based on AES standards. Key features include a weatherproof cone, high sensitivity of 98 dB, and a maximum peak-to-peak excursion of 9 mm before damage. Technical details are provided, such as Thiele-Small parameters, mounting information, and dimension drawings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Beyma Speakers Data Sheet Low Mid Frequency 15LX60V2

    Uploaded by

    Agus mulyadi
    9 views2 pages
    This document provides specifications for the Beyma 15LX60V2 low frequency transducer. It has a rated impedance of 8 ohms and can handle up to 700 watts of continuous power based on AES standards. Key features include a weatherproof cone, high sensitivity of 98 dB, and a maximum peak-to-peak excursion of 9 mm before damage. Technical details are provided, such as Thiele-Small parameters, mounting information, and dimension drawings.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the Beyma 15LX60V2 low frequency transducer. It has a rated impedance of 8 ohms and can handle up to 700 watts of continuous power based on AES standards. Key features include a weatherproof cone, high sensitivity of 98 dB, and a maximum peak-to-peak excursion of 9 mm before damage. Technical details are provided, such as Thiele-Small parameters, mounting information, and dimension drawings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views2 pages

    Beyma Speakers Data Sheet Low Mid Frequency 15LX60V2

    Uploaded by

    Agus mulyadi
    This document provides specifications for the Beyma 15LX60V2 low frequency transducer. It has a rated impedance of 8 ohms and can handle up to 700 watts of continuous power based on AES standards. Key features include a weatherproof cone, high sensitivity of 98 dB, and a maximum peak-to-peak excursion of 9 mm before damage. Technical details are provided, such as Thiele-Small parameters, mounting information, and dimension drawings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    15LX60V2

    LOW FREQUENCY TRANSDUCER


    www.beyma.com
    LX60 Series

    KEY FEATURES

    ● High power handling: 700 WAES ● Weatherproof cone with treatment for both sides of the cone
    ● High sensitivity: 98 dB (1W / 1m) ● 4” DUO double layer in/out voice coil
    ● FEA optimized magnetic circuit ● Extended controlled displacement: Xmax ± 9 mm
    ● CONEX spider for higher resistance and consistency ● 47 mm peak-to-peak excursion before damage

    TECHNICAL SPECIFICATIONS THIELE-SMALL PARAMETERS 3


    Nominal diameter 380 mm 15 in Resonant frequency, fs 42 Hz
    Rated impedance 8Ω D.C. Voice coil resistance, Re 5,1 Ω
    Minimum impedance 7,2 Ω Mechanical Quality Factor, Qms 21,2
    Power capacity 1 700 WAES Electrical Quality Factor, Qes 0,45
    Program power 2 1.400 W Total Quality Factor, Qts 0,44
    Sensitivity 98 dB 1W / 1m @ ZN Equivalent Air Volume to Cms, Vas 105 l
    Frequency range 30 - 1.500 Hz Mechanical Compliance, Cms 92 µm / N
    Recom. enclosure Vb = 125 l Mechanical Resistance, Rms 1,9 kg / s
    (Bass-reflex design) Fb = 43 Hz Efficiency, η0 1,67 %
    Voice coil diameter 101,6 mm 4 in Effective Surface Area, Sd 0,091 m2
    Bl factor 21,1 N/A Maximum Displacement, Xmax 4 8 mm
    Moving mass 0,147 kg Displacement Volume, Vd 728 cm3
    Voice coil length 20 mm Voice Coil Inductance, Le @ 1 kHz 2,1 mH
    Air gap height 10 mm
    Xdamage (peak to peak) 47 mm

    Notes:

    1
    The power capaticty is determined according to AES2-1984 (r2003) standard.
    2
    Program power is defined as power capacity + 3 dB.
    3
    T-S parameters are measured after an exercise period using a preconditioning power test. The measurements are carried out with a velocity-current laser transducer and will reflect the long term parameters (once the loudspeaker has been working
    for a short period of time).
    4
    The Xmax is calculated as (Lvc - Hag)/2 + (Hag/3,5), where Lvc is the voice coil length and Hag is the air gap height.

    Acústica Beyma SL - P.I. Moncada II, C/ Pont Sec, 1C - 46113 Moncada, Valencia (Spain) - Tel. +34 96 130 13 75 - [email protected]
    15LX60V2
    LOW FREQUENCY TRANSDUCER
    www.beyma.com
    LX60 Series
    [dB]

    ]Ω[
    [Hz]
    Note: On axis frequency response measured with loudspeaker
    standing on infinite baffle in anechoic chamber, 1W @ 1m

    MOUNTING INFORMATION DIMENSION DRAWING

    Overall diameter 388 mm 15,3 in


    Bolt circle diameter 370 mm 14,6 in
    Baffle cutout diameter:
    - Front mount 349,5 mm 13,7 in
    Depth 142 mm 5,6 in
    Net weight 10,2 kg 21,4 lb
    Shipping weight 11,3 kg 22,4 lb
    05/22

    Acústica Beyma SL - P.I. Moncada II, C/ Pont Sec, 1C - 46113 Moncada, Valencia (Spain) - Tel. +34 96 130 13 75 - [email protected]

    You might also like