Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Beyma Altavoces Hoja Tecnica Baja Media Frecuencia 6MI100

    Uploaded by

    francis103085
    The document provides specifications for the MI100 Series mid-frequency transducer from Beyma. It has a program power of 500W, sensitivity of 94dB, and a frequency range of 100-8000Hz. The transducer is designed for high quality mid-frequency reproduction in speaker systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Beyma Altavoces Hoja Tecnica Baja Media Frecuencia 6MI100

    Uploaded by

    francis103085
    14 views2 pages
    The document provides specifications for the MI100 Series mid-frequency transducer from Beyma. It has a program power of 500W, sensitivity of 94dB, and a frequency range of 100-8000Hz. The transducer is designed for high quality mid-frequency reproduction in speaker systems.

    Original Title

    beyma-altavoces-hoja-tecnica-baja-media-frecuencia-6MI100 (2)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for the MI100 Series mid-frequency transducer from Beyma. It has a program power of 500W, sensitivity of 94dB, and a frequency range of 100-8000Hz. The transducer is designed for high quality mid-frequency reproduction in speaker systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views2 pages

    Beyma Altavoces Hoja Tecnica Baja Media Frecuencia 6MI100

    Uploaded by

    francis103085
    The document provides specifications for the MI100 Series mid-frequency transducer from Beyma. It has a program power of 500W, sensitivity of 94dB, and a frequency range of 100-8000Hz. The transducer is designed for high quality mid-frequency reproduction in speaker systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    6MI100

    MID FREQUENCY TRANSDUCER


    www.beyma.com
    MI100 Series

    KEY FEATURES

    ● Program power: 500 W ● Shorting cap for extended response and low harmonic
    ● Sensitivity: 94 dB (1W / 1m) distortion
    ● 2” aluminum voice coil ● Designed for high quality mid-frequency reproduction
    ● Die cast aluminum basket

    TECHNICAL SPECIFICATIONS THIELE-SMALL PARAMETERS**


    Nominal diameter 165 mm 6,5 in Resonant frequency, fs 128 Hz
    Rated impedance 8Ω D.C. Voice coil resistance, Re 6Ω
    Minimum impedance 6,8 Ω Mechanical Quality Factor, Qms 8,6
    Power capacity* 250 WAES Electrical Quality Factor, Qes 0,55
    Program power 500 W Total Quality Factor, Qts 0,51
    Sensitivity 94 dB 1W / 1m @ ZN Equivalent Air Volume to Cms, Vas 3,1 l
    Frequency range 100 - 8.000 Hz Mechanical Compliance, Cms 119 µm / N
    Voice coil diameter 50,8 mm 2 in Mechanical Resistance, Rms 1,2 kg / s
    Bl factor 10,8 N/A Efficiency, η0 1,2 %
    Moving mass 0,014 kg Effective Surface Area, Sd 0,014 m2
    Voice coil length 9 mm Maximum Displacement, Xmax *** 3 mm
    Air gap height 7 mm Displacement Volume, Vd 42 cm3
    Voice Coil Inductance, Le @ 1 kHz 0,2 mH

    Notes:

    * The power capaticty is determined according to AES2-1984 (r2003) standard. Program power is defined as the transducer’s ability to handle normal music program material.

    ** T-S parameters are measured after an exercise period using a preconditioning power test. The measurements are carried out with a velocity-current laser transducer and will reflect the long term parameters (once the loudspeaker has been
    working for a short period of time).

    *** The Xmax is calculated as (Lvc - Hag)/2 + (Hag/3,5), where Lvc is the voice coil length and Hag is the air gap height.

    Acústica Beyma SL - P.I. Moncada II, C/ Pont Sec, 1C - 46113 Moncada, Valencia (Spain) - Tel. +34 96 130 13 75 - [email protected]
    6MI100
    MID FREQUENCY TRANSDUCER
    www.beyma.com
    MI100 Series
    [dB]

    ]Ω[
    [Hz]
    Note: On axis frequency response measured with loudspeaker
    standing on infinite baffle in anechoic chamber, 1W @ 1m

    MOUNTING INFORMATION DIMENSION DRAWING

    Overall diameter 174 mm 6,9 in


    Bolt circle diameter 158 mm 6,2 in
    Baffle cutout diameter:
    - Front mount 146 mm 5,8 in
    Depth 85 mm 3,3 in
    Volume displaced by driver 0,75 l 0,03 ft3
    Net weight 3,0 kg 6,6 lb
    Shipping weight 3,1 kg 6,8 lb
    12/14

    Acústica Beyma SL - P.I. Moncada II, C/ Pont Sec, 1C - 46113 Moncada, Valencia (Spain) - Tel. +34 96 130 13 75 - [email protected]

    You might also like