Scribd Logo
Upload

Welcome to Scribd!

  • 141 views

    18sound 15nlw9400

    Uploaded by

    bk1313
    This document summarizes the specifications and features of the 15NLW9400, an extended low frequency transducer designed for high power subwoofer applications. It has high sensitivity of 97dB and can handle 1000W of continuous power. Key features include a neodymium magnet, 100mm voice coil, and double silicon spider and demodulating rings to improve excursion control, lower distortion, and increase heat dissipation. The transducer is suitable for use in compact enclosures and provides clean, linear low frequency reproduction at high sound pressure levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    18sound 15nlw9400

    Uploaded by

    bk1313
    141 views2 pages
    This document summarizes the specifications and features of the 15NLW9400, an extended low frequency transducer designed for high power subwoofer applications. It has high sensitivity of 97dB and can handle 1000W of continuous power. Key features include a neodymium magnet, 100mm voice coil, and double silicon spider and demodulating rings to improve excursion control, lower distortion, and increase heat dissipation. The transducer is suitable for use in compact enclosures and provides clean, linear low frequency reproduction at high sound pressure levels.

    Original Description:

    18 Sound 15nlw9400

    Original Title

    18sound_15nlw9400

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications and features of the 15NLW9400, an extended low frequency transducer designed for high power subwoofer applications. It has high sensitivity of 97dB and can handle 1000W of continuous power. Key features include a neodymium magnet, 100mm voice coil, and double silicon spider and demodulating rings to improve excursion control, lower distortion, and increase heat dissipation. The transducer is suitable for use in compact enclosures and provides clean, linear low frequency reproduction at high sound pressure levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    141 views2 pages

    18sound 15nlw9400

    Uploaded by

    bk1313
    This document summarizes the specifications and features of the 15NLW9400, an extended low frequency transducer designed for high power subwoofer applications. It has high sensitivity of 97dB and can handle 1000W of continuous power. Key features include a neodymium magnet, 100mm voice coil, and double silicon spider and demodulating rings to improve excursion control, lower distortion, and increase heat dissipation. The transducer is suitable for use in compact enclosures and provides clean, linear low frequency reproduction at high sound pressure levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    15NLW9400 Extended Low Frequency Neo Transducer

    Key Features
    97 dB SPL 1W / 1m average sensitivity
    100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
    1000W AES power handling
    External neodymium magnet assembly
    Double Silicon Spider (DSS) for improved excursion
    control and linearity
    Double Demodulating Rings (DDR) for lower distortion
    and improved heat dissipation
    Improved dissipation via integrated heatsink
    Ideal for high SPL subwoofer applications

    General Description
    022158N180 8 Ohm 027158N180 Recone-kit 8 Ohm
    The 15NLW9400 is an extended low frequency loudspeaker which
    sets a new industry standard in 15" (380mm) neodymium 4" voice
    coil high performance transducers. It has been designed for use as a
    low bass or sub-woofer component in either a more compact reflex,

    NEODYMIUM LF-MB-MF TRANSDUCERS


    bandpass or horn loaded configuration. It provides clean, linear,
    undistorted low frequency reproduction at very high power levels. In
    its reflex configuration, it can be used in extremely compact
    enclosures, (65 - 150 lt).
    The low weight neo magnet assembly assures high flux
    concentration, low power compression and excellent heat exchange,
    resulting in high levels of force factor and power handling with an
    optimum power to weight ratio. The integrated heatsink has been
    studied using F.E.A. simulators and the necessary heat transfer to
    the dissipative structure has been improved, increasing power
    handling and lowering the power compression figures.
    The high excursion capabilities of the surround and suspension
    system, in conjunction with the Double Silicon Spider (DSS), enable
    the 15NLW9400 to achieve high levels of linear travel and maintain
    full control of the moving mass.
    The already low distortion and sound quality of this loudspeaker has
    been further improved by the Double Demodulation Rings (DDR),
    designed to dramatically reduce the intermodulation and harmonic
    distortion whilst improving the transient response. The design
    provides clean, undistorted LF reproduction even at very high SPL
    without damages.
    The 15NLW9400 features a dedicated carbon fibre reinforced
    straight ribbed cone, with a specific pulp formulation containing
    damping fibres. The membrane is treated in-house with a
    proprietary resin mix in order to increase the cone bend
    performances, up to 6 times better if compared with traditional
    celluloses pulp, twice than glass fibre added pulps. The results is a
    very linear piston action across the entire working range minimizing
    the breaking modes.
    The suspension system provides symmetric large signal behaviour
    throughout the whole working range, providing low harmonic
    distortion at different excitation levels.
    The state-of-the-art 100mm (4in) 4-layers Interleaved Sandwich
    Voice coil (ISV) provides high levels of thermal stability and
    durability. The weight of the windings are evenly distributed,
    providing a uniform motive drive. This, in conjunction with the use of
    state-of-the-art high temperature resin adhesives, results in an
    extremely linear motor assembly.
    The 15NLW9400 ability to perform properly under inclement weather
    conditions has been achieved using a special coating applied to
    [email protected]
    both the top and back plates. www.eighteensound.com
    NEODYMIUM LF-MB-MF TRANSDUCERS
    15NLW9400
    Extended Low Frequency Neo Transducer

    GENERAL SPECIFICATIONS
    FREQUENCY RESPONSE CURVE OF 15NLW9400 MADE ON 125 LIT. ENCLOSURE TUNED
    NOMINAL DIAMETER 380mm (15 in) AT 50HZ IN FREE FIELD (4PI) ENVIRONMENT. ENCLOSURE CLOSES THE REAR OF THE
    RATED IMPEDANCE 8 ohms DRIVER. THE THIN LINE REPRESENTS 45 DEG. OFF AXIS FREQUENCY RESPONSE.
    AES POWER (1) 1000W
    PROGRAM POWER (2) 1400W

    Eighteen Sound engages in research and product improvement. New materials and design refinements can be introduced into existing products without notice.
    PEAK POWER (3) 7000W
    SENSITIVITY (4) 97dB
    FREQUENCY RANGE (5) 40 - 4000 Hz
    POWER COMPRESSION @ -10 0,6 dB
    DB (6)
    POWER COMPRESSION @ -3 2 dB
    DB
    POWER COMPRESSION @ 0 DB 2,9 dB
    MAX RECOMM. FREQUENCY 1000 Hz
    RECOMM. ENCLOSURE VOLUME 65 150 lt. (2,30 5,30 cuft)
    MINIMUM IMPEDANCE 7,2 ohms at 25C
    MAX PEAK TO PEAK EXCURSION 40 mm (1,57 in) FREE AIR IMPEDANCE MAGNITUDE CURVE
    VOICE COIL DIAMETER 100 mm (4 in)
    VOICE COIL WINDING MATERIAL aluminum
    SUSPENSION Triple roll, Polycotton
    CONE Straight ribbed, Paper

    THIELE SMALL PARAMETERS (7)


    Fs 42 Hz
    Re 5,2 ohms
    Sd 0,09 sq.mt. (139,5 sq.in.)
    Qms 10,4
    Qes 0,29
    Qts 0,28
    Vas 118 lt. (4,2 cuft)
    Mms 131 gr. (0,29 lb)
    BL 25 Tm
    Linear Mathematical Xmax (8) 9,5 mm (0,37 in)
    Le (1kHz) 1,1 mH
    Ref. Efficiency 1W@1m (half 96,9 dB
    space)

    MOUNTING INFORMATIONS
    Overall diameter 387 mm (15,24 in)
    N. of mounting holes 8 NOTES
    Mounting holes diameter 7,15 mm (0,28 in) (1) AES power is determined according to AES2-1984 (r2003) standard
    (2) Program power rating is measured in 125 lt enclosure tuned at 50Hz using a 40-400Hz
    Bolt circle diameter 370-371 mm (14,55-14,6 in)
    band limited pink noise test signal with 50% duty cycle, applied for 2 hours.
    Front mount baffle cutout 353 mm (13,90 in) (3) The peak power rating represents the maximum permitted instantaneous peak power level
    diameter over a maximum period of 10ms which will be withstood by the loudspeaker without damage.
    Rear mount baffle cutout 357 mm (14,06 in) (4) Sensitivity represents the averaged value of acoustic output as measured on the forward
    diameter central axis of cone, at distance 1m from the baffle panel, when connected to 2,83V sine wave
    test signal swept between 100Hz and 500Hz with the test specimen mounted in the same
    Total depth 174 mm (6,85 in) enclosure as given for (1) above.
    Flange and gasket thickness 19,5 mm (0,76 in) (5) Frequency range is given as the band of frequencies delineated by the lower and upper
    Net weight 6,8 kg (15 lb) limits where the output level drops by 10 dB below the rated sensitivity in half space
    Shipping weight 7,6 kg (16,78 lb) environment.
    CardBoard Packaging 405x405x214 mm (15,94x15.94x8,43 in) (6) Power compression represents the loss of sensitivity for the specified power, measured from
    dimensions 50-500 Hz, after a 5 min pink noise preconditioning test at the specified power.
    (7) Thiele - Small parameters are measured after the test specimen has been conditioned by
    1000W AES power and represent the expected long term parameters after a short period of use.
    (8) Linear Math. Xmax is calculated as (Hvc-Hg)/2 + Hg/4 where Hvc is the coil depth and Hg is
    the gap depth.

    EIGHTEEN SOUND | Via Botticelli 8 | 42124 Mancasale (RE) | Italy | Ph. +39 0522 1861800 - Fax +39 0522 1861801 Version 15NLW9400

    You might also like