Amphenol Telecommunication Aug2015

Telecommunication
A nt enna
Solut i ons
Coaxial
RF Products
C a b l es
F ib e r Op t ic
S o l u t io n s
www.amphenol.com.tr [email protected]
Telecommunication
Amphenol Antenna Solutions is a division of Amphenol

Corporation, a $6 billion NYSE company supplying to
diverse markets including the mobile networks, automotive,
military/aerospace, information technology and medical
sectors. Amphenol Corporation was founded in 1932 and
employs over 48,000 worldwide with product development
and manufacturing operations on six continents.
Antenna Solutions
The division Amphenol Antenna Solutions was founded with the singular focus of designing and manufacturing
high performance base station antennas. Today, the company is a single source for wireless infrastructure
offering not only base station antennas, but also transmission line products including RF cable, connectors
and jumpers as well as accessories (TMAs, combiners, filters, couplers, repeaters) and RET system components
(surge arrestors, Bias-Ts and PDUs).
Antennas:
Base Station Antennas
Cylindrical Antennas
Small Cell, DAS and Indoor Antennas

VHF/UHF/SHF Antennas
Microwave Antennas
Military Antennas
Automobile Antennas
Marine Antennas
2 www.amphenol.com.tr
Telecommunication
Antenna Solutions
Base Station Antennas
Amphenol Antenna Solutions offers a wide portfolio of high performance base station antennas spanning
the frequency range 25 MHz to 6 GHz. Antenna models are available in indoor, micro-cell, point-to-point,
sector panel and omni-directional configurations. With more than ½ million base station antennas in
operation world-wide, Amphenol Antenna Solutions products are field proven to withstand harsh tower
top environments. A combination of robust mechanical designs and high production standards has earned
Amphenol Antenna Solutions a reputation for quality and reliability that is second to none.
Amphenol Antenna Solutions offers a wide selection of gains, azimuth beamwidths, electrical downtilts
and polarizations to give RF engineers the tools they need to optimize networks. Innovative Wideband,
Dual-Band and Tri-Band configurations are available to provide maximum utilization of available tower
space with minimum visual impact.
In addition to antennas, Amphenol Antenna Solutions has established expertise in tri-sector antenna structures, tower top
electronics and Remote Electrical Tilt (RET) communications systems. This depth of experience allows Amphenol Antenna Solutions
engineers to develop highly sophisticated site solutions to support your most challenging requirements.
SlimLine Antennas UltraLine Antennas
Low Visual Impact Evolutional LTE Platform

The SlimLine series has smaller footprint than The UltraLine series combines Ultra Wideband arrays
traditional panel antennas. With a width of (1800+2100+2600 MHz) together with Extended Low Band
253mm and a depth of 147mm along with it aero- arrays (698-960 MHz), capable of delivering Quad-band &
dynamic shape it offers lower wind loading when Penta-band antennas as needed for MIMO x4.
mounted, thereby offering the customer reduced
CapEx on tower expense along with cleaner visual Low Visual Impact
lines. The UltraLine series has a radome width of 305mm and
Integrated RET (MDCU) depth of 160mm which accommodates 5 arrays (1 Low Band
The MDCU (Multi-Device Control unit) module + 2 Wide Band + 2 Ultra Wide Band).
is designed for SlimLine and TRIO antennas to This series offers the customer reduced CapEx on tower
permit RET control for each frequency band of the expense along with cleaner visual lines.
antenna. It is a compact module that houses the
electronic control board that drives the motors
pre-installed into all antennas prior to delivery
from the factory.
There is one module per
antenna whatever the number
of independent variable tilts in
the antenna.
[email protected] 3
Telecommunication
+ =
View from the bottom of the

1 Single Panel + 1 Single Panel = 1 TwinLine Antenna Antenna showing 12 ports
TwinLine Antennas
The Amphenol Antenna Solutions TwinLine series are Side- Integrated RET (MDCU or MDDU)
by-Side panel antennas for site sharing applications. The TwinLine series is MET & RET MDCU Unit (Dual RET)
Applications compatible (AISG1.1 or 3GPP/
• This product range enables two (or more) operators AISG2.0). A Single RET module is used
to share an antenna enclosure while at the same time to control all tilt angles, fully inserted
enabling each operator to control their antenna on a inside the antenna. This unit is field
stand-alone basis. replaceable.
• Integrating new bandwidths / technology on an existing The MDCU & MDDU are designed by Amphenol Antenna
site (e.g. UMTS and GSM on 900 MHz for the same Solutions. These are RET units which are compact modules
operator). This avoids the use of a combiner. that houses the electronic control board that drives the
motors pre-installed into all antennas prior to delivery from
Low Visual Impact the factory.
The TwinLine series has a smaller footprint than two The MDCU / MDDU Ret modules are inserted into antenna
traditional panel antennas. range – offering clean visual lines.
There is one module per antenna whatever the number of
The dimensions along with its aero-dynamic shape offers independent variable tilts in the antenna.
lower wind loading when mounted, thereby offering the
customer reduced CapEx on tower expense along with MDCU - (Multi-Device Control Unit)
cleaner visual lines. The MDCU module is designed MDCU Unit (RET)
for SlimLine, TwinLine, CylLine
One Single Installation and TRIO antennas to permit RET
Installation of a single antenna for two separate operators control for each frequency band of
while maintaining traditional individual antenna properties : the antenna.
• Frequency Bands The MDCU will control both sides of the TwinLine Series
• Electrical Downtilts (Manual or Remote) from one BTS.
• H-Planes
• Internal Diplexing MDDU - (Multi-Device Dual Unit)
The MMDU module was developed specifically for the
TwinLine antenna range.
It is utilised in the case of the control of two different tilt
groups by two different AISG connections.
For Example: Two operators sharing one TwinLine antenna
but requiring independent tilt settings.
MDDU Unit – Typical Connection
Telecommunication
Antenna Solutions
CylLine Antennas In-Building / Microcell Antennas
CylLine antennas are a series Product Description

of monosector, base mounted Amphenol Antenna Solutions in-building
antennas. CylLine is a cylindrical and microcell antennas have been deployed
concealment solution containing by network operators worldwide to provide
both the antenna and line accessories improved coverage in office buildings, campuses,
such as TMAs and RETs in a single 253 tunnels and urban canyons. Our aesthetically
mm diameter unit. pleasing, low profile designs are available in an
CylLine forms part of Amphenol’s assortment of directional and omni-directional
range of concealment antennas, which includes both street configurations giving network engineers the
work antennas and flag poles. As a self-supporting structure, tools needed to optimize coverage in these
CylLine is designed for hinged roof mounting in areas where difficult environments.
planning stipulations require a more elegant and concealed
solution than unsightly poles and towers. Innovative Wideband, Dual-Band and Tri-Band configurations
are available allowing one distributed antenna system
RF Characteristics to serve multiple service providers with minimum visual
CylLine antennas offer identical RF characteristics to the impact.
SlimLine (and other) series of panel antennas as the core of
both antenna series is identical. • SISO OMNI Antennas (Indoor DAS)
• SISO OMNI Antennas (Public Safety)
Therefore: • SISO PANEL Antennas (Indoor DAS)
• Identical radiation patterns • SISO PANEL Antennas (Public Safety)
• Identical gain • MIMO OMNI Antennas (Indoor DAS)
• Independent Remote Electrical Tilt on each sector • MIMO PANEL Antennas (DAS)
utilising MET or Amphenol MDCU (RET) units
• Dual-Band and Tri-Band configurations
• Removable connector access panels
• Radio-wise, a panel antenna or a CylLine antenna can be
selected
Integrated RET (MDCU)

There is one module per
antenna whatever the number of
independent variable tilts in the
antenna.
[email protected] 5
Telecommunication
Trio Antennas
TRIO antennas are 3-sector base station antennas concealed

inside a compact cylindrical shroud. Unlike Unicell structures,
the TRIO radiating sub-assemblies are not individually
removable. Rather, the antenna for each sector is built
directly into the TRIO mechanical structure, creating the
smallest possible antenna diameter.
The product range includes Wideband, Twin-Wideband,

Dual-Band and Tri-Band configurations.
TRIO antennas are RET capable and selected models are

available with azimuth panning.
Accessories such as TRIO extension canisters, lightning

protection kits, flag adapter kits and mounting masts are
available to enhance the product offering.
TRIO Product Features

• 3-Sector base station antennas
• Wideband, Dual-Band and Tri-Band configurations
• Removable connector access panels
• Independent Remote Electrical Tilt on each sector
• Independent AZ panning available in some modules
Available Accessories
• Antenna extensions
• Hinge pedestal
• Lightning finial
• Flag pole solutions
• TMA support
Antenna Types
Amphenol offers antennas for virtually all applications, with product ranging from 25 MHz to 6 GHz. This product guide contains antennas for
InBuilding, Microcell and DAS applications.
The tables on the following pages are sorted by antenna type, then by band type, by polarization and finally by horizontal beamwidth.
Below are description of the different types of
InBuilding/Microcell/DAS antennas available from Amphenol.
Microcell Ceiling Mount Omni Shrouded Yagi

Standard yagi antennas with all elements enclosed in a
can be used for a variety of applications.
reliable performance in all weather conditions.
M icrocell Ceiling Mount Tr i-Sec tor

w i t h Vari ab l e A z i m u t h / G a i n 3-Sector base station antennas concealed inside compact
Ceiling mount antennas that can be directional or
smallest diameter possible. Typically deployed as lamp posts,
M ic rocell Pane l Om ni-Dir ec t ional

A rugged omni-directional series featuring upright and
mount applications. Both front and rear connector options
available. Colinear and non-colinear designs available.
M ic ro c e l l E n d - Fed Omni Dish Refl ec tor

Small and versatile end-fed omni antennas for inbuilding or
outdoor applications.
90° and in the entire back hemisphere.
Pa n e l
and variable electrical tilt options.
Planar Array
Antenna in which all elements, both active and parasitic, are
in one plane. May be used for directional beam control by
varying the relative phase of each element.
Yagi
Multi-element highly directional antennas. Light, but strong
construction for easy deployment. Available for medium
duty with 150 W or heavy duty with 300 W.
www.amphenol.com.tr
[email protected]
Telecommunication
VHF/UHF & SHF Antennas

50 MHz to 1.5 GHz. Omnis, yagis, panels and stacked dipole arrays for Private Mobile Radio (PMR), Land Mobile Radio (LMR) and
Terrestrial Trunked Radio (TETRA).
C & S Antennas offers a broad range of UHF, VHF and SHF antennas.
Directional Antennas Omnidirectional Antennas
A range of Directional Panel Antennas, Stacked Dipole Array Amphenol’s colinear antennas are designed for deployment
Antennas, Sector Antennas and a comprehensive portfolio in VHF, UHF and SHF networks. A wide variety of options
of multi-element VHF/UHF & SHF yagi directional antennas. are available including gain, tilt, lightening protection and
Serving markets such as PMR/ LMR /Trunked Radio, designs that have low passive intermodulation to minimize
Broadcast, Air Radio, GSM-R and TETRA applications. network interference.
Produced to the highest quality standards, these robust Antennas are housed inside a high-strength glass fibre
antenna designs will ensure reliable operation in harsh shroud and manufactured to the highest quality standard,
environmental conditions. Low IMP rated models provide a ensuring long term, reliable operation.
consistently lower noise floor over the life of the antenna
whilst some models are covered in a shroud ideal for in • Colinear Antennas
tunnel applications. • Centre-fed Dipole Antennas
• End-fed Dipole Array Antennas
• Yagi Antennas • Ground Plane Antennas
• Shrouded Yagi Antennas • Miscellaneous Antennas
• Stacked Dipole Array Antennas
• Directional Panel Antennas
• Sector Antennas
• Miscellaneous Antennas
Telecommunication
Antenna Solutions
Indoor/Microcell Antennas (TETRA) SOF230™ Special Forces Antenna Kit
Amphenol’s DAS, in-building and microcell antennas have ̇ Operati̇ons Forces Multi̇-Confi̇gurable Antenna Kit
Special
been deployed by network operators worldwide to provide The SOF230 antenna was designed specifically for the
improved coverage in office buildings, campuses, tunnels US Special Operations Forces for use in any environment
and urban canyons. Our aesthetically pleasing, low profile that they may encounter. The SF230 antenna system has
designs are available in an assortment of directional and fifteen configurations including NVIS, Omnidirectional
omnidirectional configurations giving network engineers and Directional that cover short, medium and long range.
the tools needed to optimize coverage in these difficult The kit includes a counterpoise for use when poor ground
environments. conditions exist due to dry soil, such as desert conditions. The
Innovative wide band, dual band and tri band configurations kit contains a 1:1 and 6:1 BALUN and terminating resistors
are available allowing one distributed antenna system that allow a broadband antenna to be erected if a tuner or
to serve multiple service providers with minimum visual coupler is not used or damaged in the field. All components
impact. are built to meet MIL-STD 810G and are extremely durable
and long lasting.
• Directional Antennas
• Omnidirectional Antennas
Accessories
• Phasing Harnesses
• Mounting Hardware
MULTILITE™ Tactical Antenna (MTA)
Multi̇-Confi̇gurati̇on Hf Tacti̇cal Antenna Sy

The Multilite™ Tactical Antenna system or MTA is a key
HF Antenna Systems (1.6-30 MHz) element in a communication system since its deployment
can be controlled by the operator to suit all operational
C&S Antennas manufactures HF wire antennas for short, requirements. It is comprised of seven separate antennas
medium and long range communications. The antennas are for seven roles:
designed for tactical, emergency and fast-reaction situations. 1. Horizontal dipole – omnidirectional at short or medium-
Wires are Kevlar cored, copper braided and pvc coated with range, broadside at long-range
a no-kink feature. They are numbered for accurate set-up 2. Sloping dipole – omnidirectional for short/medium-range
and are designed for the military environment with the 3. Bent dipole – low frequency ground wave
solider in mind. 4. Inverted L – low frequency ground waves
5. Base Feed Vertical – omnidirectional for ground and long-
distance skywave
6. Sloping V – directional medium-range
7. Inverted V – inverted V long-range directional
[email protected] 9
Telecommunication
LFH-230 FANLITE™
Omnidi̇ recti̇
̇ onal Theater Range Hf Wire ̇ Ant Man-portable Telescopic Masts
The LFH-230 FANLITE™ antenna is a lightweight,
transportable HF wire antenna intended for omnidirectional CARRYMAST™
skywave communications to a range of about 2,000 miles, CARRYMAST™ is a range of lightweight, man-portable
including short-range Near Vertical Incidence Skywave (NVIS) carbon fiber masts available in 9m (30 ft), 10m (34 ft), 12m
operation. Supplied in a rapidly assembled kit form, the (38 ft) and 15m (50 ft) standard heights. These lightweight
antenna is designed for use with C&S Antennas’ telescopic masts are designed to be carried by one person and can be
CARRYMAST™. When erected on one of these masts, the erected in the field in minutes, even under severe weather
LFH-230 FANLITE™ may be set-up by two people in less than conditions. CARRYMAST™ was designed to support C&S
25 minutes. Antennas’ range of Tactical HF Antennas Systems. An
assortment of adapters and accessories are available to
support UHF, VHF and microwave antennas as well.
• Rapid deployment, simple operation
• Low weight
• One or two man setup
• Robust and reliable, proven in action
• No pumps or winches necessary
• Compact stowed size
• Low radar cross-section
• Ice resistant
• MIL-STD 810C and NSN listed
LONGSHOT™ • Multi-antenna capable
• Ground, hardstand or vehicle
̇ Anten
Tacti̇cal Long Range Hf Wire
The Longshot™ is a lightweight, transportable HF wire
antenna intended primarily for long-range skywave
communications. Supplied in a rapidly assembled kit
form, the antenna may be erected in a variety of long wire
configurations (including a low profile, jam-resistant mode)
to meet contingency. The Longshot™ has a 500 Foot Sloping
Vee – Long-Range, Transmit/ Receive.
Telecommunication
Antenna Solutions
CARRYMAST™ Accessories
Quoted performance parameters are provided to offer
typical or range values only and may vary as a result
of normal manufacturing and operational conditions.
Extreme operational
conditions and/or stress on structural supports is beyond
our control. Such conditions may result in damage to this
product. Improvements to product may be made without
notice.
Integral Tripod
• Used for temporary roof mounting
• Folds along mast body
Tilter / Positioner
• Used to provide boresight
stabilization and elevation tilt of
narrowbeam antennas
T-Bar Adaptor
• Enables two antennas to be mounted
at mast head simultaneously
• Straps to mast body for
transportation
Half-Way Up Adaptor
• Side mounting for antenna
[email protected] 11
Telecommunication
Microwave Antennas Automobile Antennas

0.3 meter, 0.6 meter, 1.2 meter and 1.8 meter microwave A large choice of termination styles and whip styles including
antennas. ¼ wave,
½ wave, 5/8 wave and collinear to suit your specific

application.
Marine Antennas
Covering the AM, FM, HF, CB, TV, VHF, UHF and Cellular
frequency bands
Telecommunication
Antenna Solutions
Networks Networks
TETRA TETRA
Amphenol Antenna Solutions, designs and
Antennas for manufactures antenna technology for TETRA,
Antennas for
PMR, Air Radio, Marine, Automobile and
Broadcast industries. With over 80-years
of experience, Amphenol’s comprehensive
range consists of 600 products serving system
integrators, installer- and network operators.
Our Private Networks division offers a bespoke

design service to create an antenna product that
exactly matches the electrical and mechanical
characteristics required by our customers, or,
we can make minor modifications to existing
designs, all tested in-house on our outdoor range
and indoor anechoic environments.
Amphenol Antenna Solutions operates from

eight strategically located manufacturing
and R&D centres around the world: USA (2),
Mexico, Brazil, France, UK, India and China.
With teams of engineers in each regional market
Antennas for rof sannetnA

working directly with OEMs, operators, system
integrators and installers, Amphenol remains at
TETRA ARTET
the forefront of relevant antenna design.
Networks skrowteN
Telecommunication
Specially designed for the base station of mobile communication system. The product are good in water
resistance and reliable in connecting structure. Combining with the reasonable mechanics principle
and radio frequency feature, they can be used under different circumstances. They have the features
of easy in installation and reliable in connection.
RF Products
Telecommunication
RF Products
RF Connectors
Amphenol coaxial connectors for corrugated coaxial Type N

cables are available in both 7-16 DIN and N type with
male and female interfaces. Description
Named after Paul Neill of Bell Labs after being developed
Product Description in the 1940’s, the Type N offered the first true microwave
• One-piece design with O-Ring seals performance. The Type N connector was developed to
• Outstanding RF performance satisfy the need for a durable, weatherproof, medium-size
• Suitable for both Copper and Aluminium corrugated RF connector with consistent performance through 18 GHz.
and smooth wall cables There are two families of Type N connectors: Standard N
(coaxial cable) and Corrugated N (helical and annular cable).
Their primary applications are the termination of medium to
miniature size coaxial cable, including RG-8, RG-58, RG-141,
and RG-225.
Features/Benefits
• Accommodates a wide range of medium to miniature-
sized RG coaxial cables in a rugged medium-sized design.
• Broad line of Military (M39012), Industrial (UG) and
Commercial (RFX) grade products available.
• Meets many customer application demands with plug
styles available in straight and right angle and jack
styles available in panel mount, bulkhead mount, and
receptacle.
Applications
• Antennas
• Base Stations
• Broadcast
• Instrumentation
• Microwave Radio
• Mil-Aero
• PCS
• Radar
• Radios
• Satellite Communications
• Surge Protection
• WLAN
Telecommunication
7/16 RF Panel Mount Connectors
Description • Different designs for pin termination

The 7/16 series name derives from the metric dimensions of • Waterproofing IP68
the connector interface: 7mm OD of inner contact, 16 mm • Broadband performance covering all wireless service
ID of outer contact. 7/16 connectors are designed for use band
in communications systems with power levels of 100 watts • N and DIN types are available
per channel. Long popular in Europe, the 7/16 interface has
gained acceptance in the U.S. for its ability to operate at
elevated power levels. There are three families of 7/16 DIN
connectors: corrugated cable (both Annular and Superflex),
standard cable connectors, and custom. RF coaxial
connectors are the most important element in the cable
system. Corrugated copper coaxial cables have the potential
to deliver all the performance your system requires, but they
are often limited by the performance of the connectors.
Corrugated connectors have been designed from the ground
up to deliver optimum performance, while retaining ease of
installation. Inter-modulation distortion, a major concern in
today’s communications systems, is consistently low with
these connectors.
Features/Benefits Coaxial Feeder Cables

• Low IMD and VSWR
• Self-flaring design ensures ease of installation Product Description
• Pre-assembled gasket protects against dust (P68) and Flexible and Super flexible Copper & Aluminium RF coaxial
water (IP68) per IEC 169 feeder cable.
• Limited internal junctions reduce sources of IMD
• Silver-plated contacts and silver or white Available Types
• Bronze-plated bodies deliver a high conductivity and • Low-loss Copper or Aluminium – Standard & Fire
corrosion resistance for a long, trouble-free life Retardant versions available
• Easy-Hex coupling nut allows tightening by hand or with a • Super flexible Copper or Aluminium – Standard & Fire
standard wrench for ease of mating Retardant versions available
Applications Sizes
• Antennas • Jumper Assemblies • 1/4”, 3/8”, 1/2”, 7/8”, 1-1/4” and 1-5/8”.
• Base Stations • Lightning Protection
• Broadcast • Satellite Communications
Telecommunication
RF Products
Jumper Cables
Amphenol’s range of jumper cable assemblies are designed RF Feeder Jumper Cables
for outdoor applications under extreme conditions with
high flexibility and small bending diameters. • Excellent VSWR and PIM performance covering all
wireless service band
Product Description • Complete product range ---- available for any cable type
• Excellent VSWR and PIM performance covering all & length with a various connector combination
wireless telecommunication frequency bands • Waterproof per IP67 water immersion testing
• A complete product range available utilising a wide
range of coaxial connectors and cables in standard or
customised lengths Jumper Cables & Superflex Jumper Cables
• IP67 Protection Rating
• High Strength & Flexibility
• Over moulded Boots
RF Incabinet Jumpers
• Excellent VSWR and PIM performance

• Using flame retardant cable
• Soldering assembly design
• In BTS cabinet application
RF Pig Tail Jumpers
• 100% PIM performance testing

• Automatic soldering assembly
• Apply to wireless base station antenna
Telecommunication
Surge Arrestors Couplers & Splitters
Product Description Product Description

Protect cell sites against overvoltage damage with coaxial Amphenol offers RF passive products such as couplers
surge arrestors. and splitters. These products feature broadband
characteristics covering all wireless service bands with
Available Types outstanding RF performance, high isolation low insertion
• ¼ Wave Stub Surge Arrestors loss and low VSWR. Couplers and splitters are available
• Gas Tube Surge Arrestors with SMA, N and DIN type connectors and are fully
• Hybrid Surge Arrestors weather-proofed to satisfy class IP67.
Available with N and DIN 7-16 interfaces
Telecommunication
RF Products
Tower Mount Amplifiers Diplexers & Triplexers

Tower Mounted Amplifiers (TMAs), also referred to as Diplexing & Triplexing filters from Amphenol allow
Mast Head Amplifiers (MHA) or Low-Noise Amplifiers operators to combine multiple carrier frequencies onto a
(LNAs), reduce the over-all system noise figure of a cell single run of coax, resulting in reduced cost, lower wind-
site and provide increased uplink sensitivity. loads and reduced weight. Amphenol offers low insertion
loss designs capable of withstanding high transmit power
System noise figure reductions of 2–3 dB are typical, and providing low IM performance.
resulting in improved in-building penetration, higher call
quality, fewer dropped calls, higher data rates and longer Housed in rugged, weather-proof enclosures, Amphenol
mobile battery life. filters are field proven to provide reliable service in harsh,
tower top environments. Careful attention to materials
Amphenol’s TMAs are housed in strong, weather-proof and finishes in combination with high production
enclosures, utilize highly de-rated electronic components, standards insures long term, trouble free performance.
and include internal lightning protection to insure trouble
free operation.
Telecommunication
Standard Cable Clamp
Indoor Earthing Kit, Clamp Type
Earthing Kits Cable Clamps

For Outdoor & Indoor Applications for the complete Standard Cable Clamps & Leakage Cable Clamps
range of feeder cable sizes. • Standard cable clamps supplied in 1, 2, 3, 4, & 6 Way
for the complete range of feeder cable sizes
• Leakage cable clamps supplied for 7/8”, 1-1/4” &
1-5/8” cable sizes
Indoor Earthing Kit, Clip Type
Leakage Cable Clamp
Outdoor Earthing Kit – Strap Type
Outdoor Earthing Kit – Spring Type
Telecommunication
RF Products
Additional BTS Accessories
Product Description
Amphenol Antenna Solutions offers a complete range of accessories for BTS installations.
All products are professionally manufactured to international standards while being cost effective at the same time.
Telecommunication
Hybrid Cell Tower Cables Power Cables

Power + Optical
Powering Next-Generation Wireless
Support Next-Generation Wireless Deliver power efficiently to new or existing
Whether you are installing new or upgrading with wireless telecommunications sites, while reducing installation costs,
remote radio heads (RRHs), you need to reduce installation boosting performance, and ensuring long-term reliability.
costs, boost performance to support 4G broadband, and Power cables from Times Fiber deliver DC voltages reliably
ensure long-term reliability in a scalable solution to future- and efficiently to remote and indoor equipment. Special
proof your investment. design features simplify installation and reduce space
Hybrid cables from Times Fiber simplify tower cabling by requirements.
providing power and optical connectivity in a single cable. • Flexible Configurations. Get the right mix of power
• Flexible Configurations. Get the right mix of power and conductors for your tower
optical for your tower • Better Use of Spece. Square conductors lay and tuck easier,
• High Performance. Support the latest 4G protocols, such allowing better routing
as LTE • Economical. Lower installation costs using more
• Economical. Lower installation costs by running one cable fexible round high-count conductors
instead of multiple cables • Rugged. Choose from a variety of jacket types or with optional
• Rugged. Tough, sunlight-resistant PVC jacket shielding
• Lightweight. Significantly lighter than designs using • Versatile. Have products shipped on reels, drums or as coils
corrugated metal shielding, our cables allow easier • Complete. Install faster with factory-terminated
installation and less tower loading assemblies built to your specifcations
• Complete. Install faster with factory-terminated assemblies • Customizable. Specify other confgurations of conductor
built to your specifications counts, cable types, or shielding—with
• Customizable. Specify other configurations of conductor fast-turn delivery
counts, cable types, or shielding— with fast-turn delivery

RF CONNECTORS
Product Features:
One pece pn desgn
O rng seals
Outstandng RF performance
N and DIN types are avalable
Sut for both copper and alumnum cables
1 5/8 DIN Female 1 5/8 N Male
3/8 N Male
1 1/4 DIN Female
1/2 DIN Female
7/8 DIN Male
LMR400 DIN Male
LMR600 DIN Female
LMR400 DIN Female
LMR600 DIN Male
1/2 N Male
1/4 N Male Angle 1/2 DIN Male Angle
www.amphenol.com.tr
[email protected]
LMR
LMR Bundled
Bundled Cable
Cable Specifications:
®
Specifications:
®
LMR-BC240-9- LMR-BC400-
Part Number LMR-BC240-4 LMR-BC240-9 LMR-BC240-12 LMR-BC300-12 LMR-BC400-7 LMR-BC400-9
LW-75
LMR-BC240-9- 9-DB
LMR-BC400-
Stock
Part Code
Number (31845)
LMR-BC240-4 (31844)
LMR-BC240-9 (31842)
LMR-BC240-12 (31843)
LMR-BC300-12 (31836)
LMR-BC400-7 (31831)
LMR-BC400-9
(31846)
LW-75 (31838)
9-DB
Stock Code (31845) (31844) (31842) (31843) (31836) (31831)
(31846)
LMR-LW- (31838)
mponents LMR-240 LMR-240 LMR-240 LMR-300 LMR-400 LMR-400 LMR-400-DB
240-75
LMR-LW-
mponents LMR-240 LMR-240 LMR-240 LMR-300 LMR-400 LMR-400 LMR-400-DB
dle 240-75
2-2 1-8 1-8 4-8 4-8 1-6 1-8 1-8
nfiguration
dle
2-2 1-8 1-8 4-8 4-8 1-6 1-8 1-8
nfiguration
er
PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket
tection
er
PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket PE Jacket
tection
rall
0.688 1.06 1.06 1.2 1.475 1.35 1.6 1.6
meter
rall (in)
0.688 1.06 1.06 1.2 1.475 1.35 1.6 1.6
meter (in)
ght (lbs./ft) 0.195 0.375 0.295 0.58 0.89 0.63 0.75 0.75
ght (lbs./ft) 0.195 0.375 0.295 0.58 0.89 0.63 0.75 0.75
d Radius (in) 7 11 11 13 15 14 16 16
d Radius (in) 7 11 11 13 15 14 16 16
edance 50 Ohms 50 Ohms 75 Ohms 50 Ohms 50 Ohms 50 Ohms 50 Ohms 50 Ohms
edance 50 Ohms 50 Ohms 75 Ohms 50 Ohms 50 Ohms 50 Ohms 50 Ohms 50 Ohms
perature Range -40° to + 185° (-40° C to +85° C)
perature Range -40° to + 185° (-40° C to +85° C)
Attenuation LMR-BC240-9- LMR-BC400-
LMR-BC240-4 LMR-BC240-9 LMR-BC240-12 LMR-BC300-12 LMR-BC400-7 LMR-BC400-9
dB/100 ft
Attenuation LW-75
LMR-BC240-9- 9-DB
LMR-BC400-
LMR-BC240-4 LMR-BC240-9 LMR-BC240-12 LMR-BC300-12 LMR-BC400-7 LMR-BC400-9
dB/100 ft LW-75 9-DB
MHz 3 3 3 3 2.4 1.5 1.5 1.5
MHz 3 3 3 3 2.4 1.5 1.5 1.5
MHz 5.4 5.4 5.4 5.4 4.3 2.8 2.8 2.8
MHz 5.4 5.4 5.4 5.4 4.3 2.8 2.8 2.8
MHz 7.7 7.7 7.7 7.7 6.2 4 4 4
MHz 7.7 7.7 7.7 7.7 6.2 4 4 4
0MHz 11.7 11.7 11.7 11.7 9.4 6.2 6.2 6.2
0MHz 11.7 11.7 11.7 11.7 9.4 6.2 6.2 6.2
0MHz 13.1 13.1 13.1 13.1 10.6 7 7 7
0MHz 13.1 13.1 13.1 13.1 10.6 7 7 7
Tools and Install Instructions
Tools and Install Instructions
dled Jacket Strip Tool ST-BC-1& ST-BC-2 Bundled jacket strip tool for cables not having a custom jacket removal tool
dled Jacket Strip Tool GST-BC240-12
ST-BC-1& ST-BC-2 Bundled jacket strip tool for LMR-BC240-12
cables not having a custom jacket removal tool
GST-BC300-12
GST-BC240-12 Bundled jacket strip tool for LMR-BC300-12
LMR-BC240-12
GST-1700
GST-BC300-12 Bundled jacket strip tool for LMR-BC400-9
LMR-BC300-12
GST-1700 Bundled jacket strip tool for LMR-BC400-9
vidual Coax Strip Tool GST-240A Individual coax strip tool for LMR-240 based cables
vidual Coax Strip Tool GST-300A
GST-240A Individual coax strip tool for LMR-300
LMR-240 based cables
GST-400A
GST-300A Individual coax strip tool for LMR-400
LMR-300 based cables
GST-400A
GK-BC400-9 Individual
Bundle coax strip
Ground tool
Kit for for LMR-400 based cables
BC-400-9
GK-BC400-9
EC-BC-400-7B Bundle Ground
Breakout Kit for BC-400-9
Weatherseal Boot for BC-400-7
EC-BC-400-9B
EC-BC-400-7B BC-400-7
Breakout Weatherseal Boot for BC-400-9
EC-BC240-12B
EC-BC-400-9B BC-400-9
Breakout Weatherseal Boot for BC-240-12
EC-BC240-12B Breakout Weatherseal Boot for BC-240-12
1/2” cable hanger Hangers for LMR-BC240-4
ngers 7/8”
1/2” cable hanger Hangers for LMR-BC240-9
LMR-BC240-4
ngers 7/8” cable hanger Hangers for LMR-BC240-9 LW-75
SH-U1200T
7/8” cable hanger Hangers for BC240-12
LMR-BC240-9 LW-75
1 1/4” cable hanger
SH-U1200T Hangers for LMR-BC300-12
BC240-12
1 1/4” cable hanger Hangers for LMR-BC400-7
LMR-BC300-12
SH-U1700T
1 1/4” cable hanger Hangers for LMR-BC400-9
LMR-BC400-7
SH-U1700T Hangers for LMR-BC400-9-DB
LMR-BC400-9
SH-U1700T Hangers for LMR-BC400-9-DB
1/2” cable hoist Hoisting grips for LMR-BC240-4
sting Grips 7/8”
LMR-BC240-4
sting Grips 7/8” cable hoist Hoisting grips for LMR-BC240-9-LW-75
LMR-BC240-9
HG-1200T
LMR-BC240-9-LW-75
1 1/4” cable hoist
HG-1200T Hoisting grips for LMR-BC300-12
LMR-BC240-12
1 1/4” cable hoist Hoisting grips for LMR-BC400-7
LMR-BC300-12
HG-1700T
1 1/4” cable hoist Hoisting grips for LMR-BC400-9
LMR-BC400-7
HG-1700T Hoisting grips for LMR-BC400-9-DB
LMR-BC400-9
HG-1700T Hoisting grips for LMR-BC400-9-DB
World Headquarters: 358 Hall Avenue, Wallingford, CT 06492 • Tel: 203 -949 -8400, 1-800-867-2629 Fax: 203 -949 -8423
World Headquarters: 358 Hall
International Sales: Avenue,Brae,
4 School Wallingford, CT 06492 Fife,
Dysart, Kirkcaldy, • Tel:Scotland
203 -949KY1
-8400,
2XB1-800-867-2629 Fax: 203 -949 -8423
UK • Tel: +44(0)1592655428
International Sales: 4 School Brae, Dysart, Kirkcaldy, Fife, Scotland KY1 2XB UK • Tel: +44(0)1592655428
China Sales: No. 318 Yuan Shan Road, Shanghai, China 201108 • Tel: 86-21-51761234 Fax: 86-2164424098
www.timesmicrowave.com
China Sales: No. 318 Yuan Shan Road, Shanghai, China 201108 • Tel: 86-21-51761234 Fax: 86-2164424098
www.timesmicrowave.com
© 2013, Times Microwave Systems, Wallingford, CT 06492 LMRBC 4/09
© 2013, Times Microwave Systems, Wallingford, CT 06492 LMRBC 4/09
www.amphenol.com.tr
[email protected]
LMR
LMR
®
®®
ISO 9001 Certified
BundledCable
Bundled ISO
ISO9001
9001Certified
Certified
Bundled Cable
Cable
High Quality LMR®® ®Low Loss
High
HighQuality
QualityLMRLMRLow LowLoss
Loss
Flexible 50 Ohm Coax Feeder
Flexible
Flexible5050Ohm
OhmCoaxCoaxFeeder
Feeder
Cable, Bundled Under a
Cable,
Cable,Bundled
BundledUnder
Undera a
Common Outer Jacket for
Common
CommonOuter OuterJacket
Jacketforfor
Multiple Run Applications:
Multiple
MultipleRunRunApplications:
Applications:
• Smart Antenna Feeders
• •Smart
SmartAntenna
AntennaFeeders
Feeders
• IF & RF Runs to Tower
• •IFIF&&RFRFRuns
RunstotoTower
Tower
Mounted Amplifiers for:
Mounted
MountedAmplifiers
Amplifiersfor:
for:
— Cellular
——Cellular
Cellular
— Point to Point
——Point
PointtotoPoint
Point
— Broadband Wireless
——Broadband
BroadbandWireless
Wireless
— Microwave Backhaul
——Microwave
MicrowaveBackhaul
Backhaul
— WiMax
——WiMax
WiMax
— LTE Systems
——LTE LTESystems
Systems LMR® Bundled Cable is a spiral configuration of multiple
LMRLMRLMR
® ® Bundled
- 400 Bundled
®
or smallerCableCable
LMRis® a is spiral
a spiral
cables configuration
underconfiguration
a common of ofmultiple
multiple
polyethylene
LMRLMR -
® ®
400
- 400 or or
smaller
smaller LMRLMR cables
® ®
cables under
outer jacket. This innovative design acts as the perfect under a common
a common polyethylene
polyethylene
feeder
outer
outer jacket. jacket.ThisThis
innovative
innovative design
design
cable for applications requiring multiple runs, such as on acts
actsas as
thetheperfect
perfect feeder
feeder
cable
cable for for
applications
applications requiring
requiring multiple
towers or building top sites. A unique, patented grounding multiple runs,
runs,such
such as as
on on
towers
towers
fixture or or
grounds building
building
thetop top
sites.
outer sites.AA
shields unique,
unique,
of each patented
patented
cable and grounding
grounding
a rugged
fixture
fixturegrounds grounds the theouter
outershields
shields
end cap seals the bundle to prevent moisture ingress of of
each
each cable
cable and anda atrugged
a rugged
the
endend capcap
break-out point. seals
sealsthethe bundle
bundle to to
prevent
prevent moisture
moisture ingress
ingress at at
the the
break-out
break-out point.
point.
LMR ® Bundled Cable can be supplied as complete assembly
LMR
with LMR Bundled
® ®
break Bundled Cable
outs and Cable cancan
connectors bebe supplied
supplied
on bothas ascomplete
ends, complete
and asassembly
aassembly
single
with
withbreak
break outs
outsand and connectors
connectors
ended assembly (base can be trimmed and terminated on on
both
both ends,
ends, andand as asa single
a single
after
ended
installation on tower), or as a raw cable and accessories after
ended assembly
assembly (base
(base can can be betrimmed
trimmed andand terminated
terminated after
installation
installation
along with easy onontower),
tower),
to useortools.
or
asas a raw
a raw cable
Pictorial cable andand accessories
instructions accessories
and installa-
along
tion videos are available to assist in the installationand
along with witheasy
easyto to
useuse
tools.
tools. Pictorial
Pictorial instructions
instructions and
of installa-
the installa-
tion
tion
videos
videos
accessories. areareavailable
available to to
assist
assist
in in
thethe
installation
installation of of
the the
accessories.
accessories.
Features and Benefits:
Features
Features
• Less and and
Cable Benefits:
Benefits:
Runs
• Less
• Less
• Fewer GroundCable
Cable Runs
Runs
Kits and Cable Clamps to Install
•
• Reduced LaborKits
Fewer
• Fewer Ground
Ground Kits
and and and Cable
MaterialCable Clamps
Clamps
Costs totoInstall
Install
•
• RipReduced
• Reduced
cord for Labor
Labor
easyand and Material
removal Material Costs
of outerCostsjacket
• Rip • Rip
cord
cord for for
easy
easy removal
removal
• Inner cables labled with an identifier of of
outer
outer jacket
jacket
every six inches
• Inner
• Innercables
cables
• Standard Cables Include: labled
labled withwithan anidentifier
identifier every
every sixsix
inches
inches
• Standard
-•LMR-BC240-4
Standard Cables
Cables Include:
Include:
- LMR-BC300-12
-- LMR-BC240-4
- LMR-BC240-4
LMR-BC240-9 -- LMR-BC300-12
- LMR-BC300-12
LMR-BC400-7
-- LMR-BC240-9
- LMR-BC240-9
LMR-BC240-9-LW-75 - LMR-BC400-9 - LMR-BC400-7
- LMR-BC400-7
-- LMR-BC240-9-LW-75
- LMR-BC240-9-LW-75-- LMR-BC400-9
LMR-BC-240-12 - LMR-BC400-9
LMR-BC400-9-DB
-Consult
LMR-BC-240-12
- LMR-BC-240-12 - LMR-BC400-9-DB
- LMR-BC400-9-DB
factory for other or custom configurations.
Consult
Consult
factory
factory
forfor
other
other
or custom
or custom
configurations.
configurations.
www.amphenol.com.tr
[email protected]
Telecommunication
The Leader in phase stable cables and assemblies

The Leader in low loss cables and assemblies
The Leader in test cables
The Leader in lightning & surge protection
TMS/Amphenol is the leader in the design, qualification, manufacture, and on-time delivery of high performance cable and
cable assembly products to the commercial wireless and military marketplace. In 2003, TMS was selected by Lockheed Martin
Aeronautics to supply the Broadband Airborne Cable Assemblies on the F-35 Joint Strike Fighter (JSF). TMS was chosen to
supply this solution since its high performance cable assemblies are able to handle high-speed data in extreme avionics
environments including wide variations in temperature and pressure.
Coaxial Cables
FIBER COMMMUNICATION
An Amphenol Company
TMS/Amphenol was instrumental in the development TFC/Amphenol is recognized worldwide as one of the
of military specifications, including MIL-C-17 for coaxial pioneer developers of broadband cable technology
cables and MIL-T-81490 for Transmission Lines. Times and has to its credit a long list of technical expertise in
is the leading source of MIL-C-17 qualified products, foam polymer processing, application-specific product
holding more QPL’s (Qualified Product Listings) than any development, and unsurpassed, world-class customer
other manufacturer, and Times products meet rigorous service and support.
MIL-T-81490 and MIL-C-87104 requirements.
Times LMR cables are high performance broadband,

flexible, low loss 50 Ohm coaxial communication
cables designed for use in wireless applications
Telecommunication
Coaxial Cables
RG Cables Armored Assemblies
M17/RG Armored versions of many cable types are available as

Features & Benefits custom cable assemblies. Armored cable assemblies are
• Meets all MIL-C-17 Requirements available in the Miltech, Silverline, and TCOM product lines,
• Good Shielding Effectiveness as well as others. Available armor types include a range of
• Low Passive Intermod (PIM) thick wall flexible jacketing, flexible wire reinforced with
• Readily available in Distribution extruded thick wall jackets, and full metal coverage crush
• Uses Standard Connectors resistant square-lock styles with various outer jacket types.
M17/RG’s are traditional MIL Spec coax cables that were

born 50-60 years ago. Originally created to support WWII
military applications, these cables quickly became the
products of choice for commercial wireless applications
once they hit the surplus market, and continue to be used
today.
M17/RG’s have been widely adopted for commercial and
military applications. Their QPL stature insures a high
quality product made to the same spec regardless of the
manufacturer.
LSRG Military Shipboard Coax
MIL-C-17 Qualified
• MIL-Spec Air Frame, Shipboard, Ground (Tactical)
Interconnect (M17/180–/200)
• Fire Retardant / Low Smoke (non-halogen)
LMR
• Flexible For Easy Deployment / Routing
Flexible Low Loss Communications Coax
Features & Benefits
Ideal for…
• Rugged Abrasion Resistant Jacket
• Drop-in Replacement for specific RG cables (uses standard
• Excellent Shielding Effectiveness
connectors)
• Fire Retardant (non-halogen)
• Jumper Assemblies in Wireless Communications Systems
• Light Weight
• Short Antenna Feeder runs
• Flexible for Ease of Deployment
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,
• Excellent Connector Selection
WiMax,SCADA, Mobile Antennas) requiring an easily
routed,low loss RF cable
Telecommunication
CATV HELIFOIL
The low smoke CATV cables are designed to provide a low Flexible, High Power Interconnect and Jumper Cables for
loss shipboard entertainment system interconnect, yet meet Military/Aerospace and Commercial/Telecom Applications.
the rigid shipboard requirements per MIL-C-17 “G”. Detailed
data sheets are available upon request. HELIFOIL™ ultra low loss, flexible microwave coaxial cable
and assemblies provide excellent performance over the
DC-18 GHz frequency range. HeliFoil cable comes in three
different sizes, with options of stranded center conductors
for better flexibility. All sizes provide lowest attenuation,
excellent phase stability, broad operating temperature
range and high power handling making them a good choice
for interconnect and testing applications in both field and
laboratory conditions.
TFlex®
Flexible Alternative to Semirigid Coax for Military and

Commercial Applications including, Low Loss Microwave
and Wireless Base Station Interconnects.
Developed over ten years ago as a lighter weight, flexible
alternative to semirigid coax, TFlex® has been widely
adopted for both military and commercial communication
systems. Its Teflon FEP jacket provides excellent protection
in corrosive environments and its flexible nature eliminates
the need for hand or precision machine bending. Following
the most convenient routing, TFlex® can be preterminated
to its desired length and can then be just “plugged in”.
Features & Benefits:

• Meets all MIL-C-17 Requirements
• Excellent Shielding Effectiveness
• Low Passive Intermod (PIM)
• Stable Loss, Phase and VSWR vs. Flexing
• Uses Standard Solder-on Semirigid Connectors
Telecommunication
Coaxial Cables
LSSB™ LLSB
Low Smoke - Non-Halogen Military/Aerospace Coax Low Loss Military/Shipboard Coax

MIL-Spec Air Frame, Shipboard, Ground (Tactical)
MIL-C-17 Qualified
Features & Benefits • Low Loss Air Frame, Shipboard,
• Rugged Abrasion Resistant Jacket • Ground (Tactical) Interconnect
• Excellent Shielding Effectiveness • Fire Retardant / Low Smoke (non-halogen)
• Fire Retardant (non-halogen) • Flexible For Easy Deployment / Routing
• Light Weight
• Flexible for Ease of Deployment Features & Benefits
• Excellent Connector Selection • Lower Loss
• Superior Shielding
Effectiveness
• Fire Retardant (non-halogen)
• Light Weight
• Flexible for Ease of Deployment
• Excellent Connector Selection
Waterblocked, Low-Smoke Triaxial Cables
For applications that require watertightness in addition to

the performance requirements of the LS/LT designs, Times
is qualified to the M17/134 and M17/135 designs. These
triaxial designs meet the 25 psi-6 hour watertightness test,
as well as the 1000 psi-2 hour hydrostatic tests that are
requirements of MIL-C-17.
Telecommunication
Broadband Cables PhaseTrack Cables
T10 & TX10 Hardline Cable Solutions Times Microwave TF4 dielectric material is the key
The T10 & TX10 Hardline cable line is constructed with ingredient, making our PhaseTrack products the best choice
seamless extruded tube. TFC’s T10 & TX10 cable will outlast for phase critical interconnect applications.
the standard welded tube cables. This cable is designed PhaseTrack cable dielectric has been developed to eliminate
to eliminate pinhole leaks and micro-cracking. This cable the “PTFE knee” in the phase/temperature performance of
line can be used with industry standard coring tools and cables for phase-critical applications.
connectors. The PhaseTrack flexible cable product line is available in a
Features range of sizes using TF4 dielectric.
• Clean coreability and preparation
• Triple bonded
• Tighter bend radius than double bonded cable
• No air gap. eliminates a common path for moisture found
in double bonded cable
• Prevents inner conductor pull-out (suckouts) as result of
temperature swings.
• Eliminates outer sheath shrink-back due to temperature
cycles.
• Works with all industry standard coring tools and
connectors
• NEC 820 CATV & CATVR listings available
• Recyclable reels and packaging
• Seamless Extruded Aluminum Tubing
SiO2 Phase Cable Assemblies
SiO2 Semi-Rigid cable assemblies provide formable phase

stable performance using materials developed specifically
for use in applications where repeatable phase performance
is critical. In short, matched TMS SiO2 cable assemblies
exhibit the best phase-tracking performance available.
Work with your Times Military/Aerospace Regional
Applications Engineer to get the SiO2 Semi-Rigid assembly
configurations you need.
The SiO2 product line consists of cables sized from 0.090 to
0.270 inches in diameter.
Telecommunication
Coaxial Cables
QEAM MaxGain
The ultimate cable design for field deployable applications is DC-18 GHz Ultra Low Loss Coaxial Cable and Connectors
the QEAM (Quick Erecting Antenna Mast) cable. This cable • Times Unique Spiral Outer Conductor Technology
series is designed specifically for use in demanding, mission • Lighter Weight Compared to Competing Technologies
critical applications, where reeling and unreeling are required
over a wide temperature range. Its performance has been MaxGain™ ultra low loss, flexible Microwave Coaxial Cable
proven on systems such as the Hawk and Patriot Missile. and a full range of passivated stainless steel connectors are
The use of a taped PTFE dielectric results in exceptionally available as fully tested custom cable assemblies.
low bending moment and long bend life (typically more MaxGain™ assemblies are used for general applications in
than 10,000 bends, depending upon radius, etc.). In the both field and laboratory conditions. They are ideally suited
larger sizes, use of a composite center conductor further for applications where lowest loss and good stability with
improves bend properties. Based on our MilTech aerospace bending is required.
cable assemblies, these assemblies are fully weather sealed
and constructed in accordance with the requirements of Features & Benefits:
MIL-T-81490.Heavy duty stainless steel connectors provide • Lowest Insertion Loss Available, DC - 18 GHz
long term corrosion resistance and ruggedness. Qeam cables • Ultra Stable Insertion Loss and VSWR with Flcxing
are sold only as finished assemblies, tested over the required • With wide Temperature Range (-65”C to + 150”C)
frequency band and fitted with hoisting grips or otherwise • Extremely Flexible, Low Minimum Bend Radius
customized to the requirements of the application. • Superior Shielding Effectiveness (> 100 dB)
TCom®-LS
Low Loss Coaxial Cables

For applications that require repeated flexing and the need
for excellent electrical performance, the TCOM-LS series
offers a non-halogen, low smoke alternative to the more
rigid MIL-C-28830 corrugated copper designs.
Telecommunication
Miltech Cables SFT
This is our high performance workhorse series in the High Performance Microwave Coaxial Cable, Connectors
MilTech™ product line. These rugged, low insertion loss, and Assemblies
broadband (0.5-18GHz), vapor sealed, cable assemblies with SFT™ - Strip Flex Taped
braided Nomex™ outer jackets for abrasion resistance, are • Low Loss
qualified to MIL-T-81490 and MIL-C-87104/2 requirements. • Flexible
• Rugged
Cable sizes from 0.13” dia up to 0.65” diameter provide a • High Temperature
wide range of cables - allowing you make the appropriate • High Power Handling
loss/size/weight trade-off. Replaceable connectors allow field • Sizes from — SFT-316 (0.120”) to SFT-600 (0.565”)
maintenance, and enhanced versatility. Vapor sealed cables
provide long life in extreme environments. The MilTech™ SFT™ high performance microwave cables are rugged and
cables are “inherently ruggedized,” and are engineered flexible, making them ideal for interconnect applications
using the basic cable design and construction to enhance from inside LRU’s to system interconnects and antenna
the handling characteristics of the finished assemblies. feeders in military and commercial systems. The wide range
Captivated contact terminations provide long-term interface of available connectors covers many interface types and
stability. These assemblies were designed from the ground up frequency ranges.
to provide reliable microwave connections you can count on. Features & Benefits:
• Much lower loss than solid dielectric cables
• Superior shielding effectiveness >100 dB
• Stable Loss, VSWR and phase with flexing
• Available as fully tested, custom cable assemblies
Telecommunication
Coaxial Cables
SilverLine Test Cables T-LNC
SilverLine™ Test Cables are cost effective, durable, high- 50 and 75 Ohm Low Noise High Performance Cables
performance cable assemblies designed for use in a broad • Stable low noise performance
range of test and interconnect applications. Fabricated • Reduced mechanically induced electrical noise
from rugged, solid PTFE dielectric cable with stainless steel • Stranded center conductor for flexibility
connectors and a proven strain relief system, these cables • Semi-conductive layering technology
provide long life and excellent stability in applications • Ruggedized polyurethane or PVC jacket
where they are repeatedly flexed and mated/unmated. • 80° C rated
SilverLine™ test cables are ideal for use in production, field
and laboratory test environments. They’re also economical T-LNC-300-50-PUR
enough to be used as interconnects in test systems. T-LNC-240-75-PVC
Features and Benefits: Vibration monitoring and wear detection for:

• Phase & Loss Stable • Aerospace
• Long Flex Life • Oil & Gas
• Triple Shielded Cable • Transportation
• High Mating Cycle, Stainless Steel Connectors • Public Utility
• Rugged, Solder/Solder Attachment • Machinery
• Redundant, Long Life Strain Relief System • Non-Destructive Testing
Silverline Cable Types: Applications:

• BronzeLine Test Cables • Accelerometers
• SilverLine-LP Low PIM Test Cables • Strain gages
• SilverLine-VNA Network Analyzer Test Cables • Transducers
• SilverLine-SF Super Flexible Test Cables • Low voltage signaling in high vibration
• SilverLine-XF Extra Flexible Test Cables
• SilverLine-LL Low Loss Test Cables
• SilverLine-TT Temperature Testing Test Cables
• SilverLine-75 75 Ohm Test Cables
• SilverLine-DAS Low PIM DAS & Component Test Cables
• SilverLine-LPA Low PIM DIN, Mini-DIN and Type N Test
Adapters
Telecommunication
Amphenol Fiber Optic Products is a premier manufacturer of optical

interconnect products. Headquartered in Lisle, Illinois, the company
is a division of Amphenol Corporation, a Fortune 500 company
with over eighty years of experience in providing total interconnect
solutions to customers throughout the world.
Fiber Optic Solutions
Telecommunication
Indoor Single Mode Cable Assemblies
Amphenol is a premier manufacturer of Singlemode

patchords in the telecommunications industry, meeting
Indoor Cable or exceeding many of the industry standard requirements
for optical transmission loss, reflectance, visual endface
Assemblies specifications, and geometry. Amphenol offers standard

patch cords in a variety of configurations and connector
types. Both standard SMF-28e and bend reduced fiber
Amphenol is a premier manufac- types are available. Custom options are available upon
turer of a full line of indoor assem- request.
blies for the Telecommunications,

Features/Benefits
Datacommunications, and Medi- • Available in a wide variety of connector types, cable
cal applications. Available in a va- designs, and lengths
riety of connectors, fiber and cable • All assemblies meet TIA/EIA and IEC intermateability
standards
construction types Amphenol as- • Duplex assembly version utilizes a removable flexible
semblies meet or exceed many of clip providing a float between channels A and B
the industry standards for indoor • RoHScompliant
• Multiple boot size, colors and angle options available
cable assemblies. Patchcords and
• Assemblies are available in standard SMF-28e and
Trunk cables are available in cus- Bend reduced fiber types .
tom configurations and lengths. • Custom configurations available upon request
Telecommunication
Indoor Multimode Cable Assemblies MSFP Patchcords
Amphenol is a premier manufacturer of Multimode Specifically designed for Brocades FC8-64 port blade,
patchords in the telecommunications industry, meeting Amphenol’s mini LC assemblies are available in many
or exceeding many of the industry standard requirements cable configurations. The mSFP cables support a higher
for optical transmission loss, visual endface specifications, rack density and are offered with laser optimized OM3
and geometry. Amphenol offers standard patch cords in a cable.
variety of configurations and connector types. Multimode
assemblies are available in a variety of fiber types; • Custom assemblies for use exclusively on Brocade
62.5/125, 50/125, 50/125 OM3, 50/125 OM4, and Bend equipment with mSFPs
reduced OM3/ OM4. • Small form factor LC connector enables high panel
densities
Features/Benefits • Laser optimized 50/125 OM3 multimode aqua cable
• Available in a wide variety of connector types, cable for higher bandwidth capabilities
designs, and lengths • Mini LC connectors to be installed on Brocade mSFPs
• All assemblies meet TIA/EIA and IEC are distinguished by black boots and clip
intermateabilitystandards • Available in a variety of lengths and configurations
• Duplex assembly version utilizes a removable flexible • RoHS compliant
clip providing a float between channels A and B
• RoHScompliant
• Multiple boot size, colors and angle options available
• Assemblies are available in OM1, OM2, OM3, and OM4
fiber types
• Assemblies are available in OM1, OM2, OM3, and OM4
fiber types
• Custom configurations available upon request
Indoor Trunk
Multifiber assemblies and trunk cables are becoming

increasingly popular in the high density marketplace.
Amphenol provides assemblies in various fiber counts
with distribution, loose tube, breakout, or ribbon cable
styles. Multifiber assemblies can be terminated with
standard connector styles or with the high density MPO
connector.
Telecommunication
MPO Cable Assemblies Medical Cable Assemblies
MPO assemblies are becoming increasing popular due to Amphenol’s custom medical cable assemblies are
the high density applications in the marketplace. MPO designed specifically for the customer’s intended
assemblies are offered with 8,12, and 24 fiber connector applications and can be designed to be medical grade
options. Available with ribbon, round, and trunk cable class VI. The Amphenol designed SMA connector can be
configurations, Amphenol’s MPO connectors meet TIA/ utilized for the air gap ferrule technology to eliminate
EIA 604-5 and IEC 61754-7. MPO assemblies are offered energy absorbing materials near the fiber end face such as
with straight, crossed, or QSFP pin outs. Please contact epoxies, connector materials, and coatings. The connector
Amphenol for assistance with configuring the required ferrules can be made of stainless steel, beryllium copper,
cable assembly. or other customer specified material. The ferrule is used
as a heat sink pulling the heat quickly away from the fiber.
Damage threshold on these assemblies will vary based on
launch conditions and operational wavelength.
Each cable assembly goes through several inspections
during the fabrication process, which include extensive
material and optical inspection. The extensive inspections
begin prior to production and continue throughout the
entire production cycle, allowing highly exceptional
product to be produced and delivered on time, the first
time, without delays.
MPO QSFP Cable Assemblies
Amphenol’s QSFP (Quad Small Form factor Pluggable)

with 4TX and 4RX channels meets QSFP requirements up
to 10Gb/s per channel for a 40G interface. Available in
both MPO to MPO or MPO to LC breakout configurations,
Amphenol’s MPO connectors meet TIA/EIA 604-5 and
IEC61754-7.
Telecommunication
905 & 906 SMA Connectors 905 SMA Damage Resistant

FiberGrip® Connector
Amphenol Fiber Optics was a pioneer in developing the
first industry standard fiber optic interconnect system by The 905 SMA Damage Resistant FiberGrip® Connector is a
introducing the SMA connector. The 905 and 906 series simple to use, epoxyless, interconnect solution for markets
were the first fiber optic interconnect system to gain where High-Power Delivery is required. This two-piece
industry wide acceptance for military, industrial, data connector is designed as a safe and cost effective alternative
communications and medical applications, before fiber that allows for efficient ease of use during termination.
was ever used for telephony. Amphenol’s Damage Resistant FiberGrip® Connector are
Today, Amphenol Fiber Optics continues to support designed for high power applications and utilize air gap
these markets with a wide variety of products that meet ferrule technology. The air gap ferrule technology eliminates
the continuing need for the family of SMAs. The SMA energy absorbing materials near the fiber end face such as
connector family utilizes a threaded coupling nut system epoxies, connector materials, and coatings. The connector
for mating and de-mating. Available with zirconia or ferrules can be made of stainless steel, beryllium copper,
stainless steel ferrules with custom hole sizes, the SMA or other customer specified material. The ferrule is used
is an excellent choice for a robust, lowcost and reliable as a heat sink pulling the heat quickly away from the fiber.
system. Damage threshold on these types of connectors will vary
Unlike any other connector on the market and as shown based on launch conditions and operational wavelength.
on page B-4 of this section, the SMA has a wide range of The front body of the connector is a ferrule that is designed
accessories such as adapters, receptacles, boots, etc. that with a custom, high-tolerance, application specific hole
make it the perfect choice for any sort of experimental diameter. The rear body contains the proprietary fiber
or R&D type application. FOC stocks many of these items retention system designed to carefully secure the optical
and can assistant your design. fiber, without the risk of damage, to the connector.
FOC has the world’s largest and most varied inventory of Amphenol’s accelerated design and development
SMA connectors. If we do not have the hole size you are cycle allows for rapid response to the client’s custom
looking for, we can typically have it drilled out in 2 weeks requirements. Amphenol Fiber Optic Products is dedicated
or less and have production quantities in 6 weeks or less. to supporting each customer by providing exceptional
quality and long-term reliability of the SMA FiberGrip®
• 905 SMA Connector connector.
• 905 Ceramic Ferruled SMArt Connector
• 905 Polymer Bodied SMA Connector Features/ Benefits
• 906 SMA Connector • Quick and Safe Epoxyless Termination
• Designed for use with High-Power Medical Laser
Delivery Systems
• Able to be Sterilized through Autoclave
• Available Custom Optical Fiber Hole Sizes and Ferrule
Tip Configurations
• Strain Relief Boots and Dust Caps Available with
Medical Grade Material
• Compatible with RFID Integrated Technology
Telecommunication
AARC
CAP, DUST W/CHAIN, AARC RECEPT

Dust cap, AARC Plug, Plastic with 160mm chain For more
Outdoor Cable detailed information and customized options please

contact Amphenol customer service for assistance.
Assembly
Amphenol’s sealed outdoor
assembly products offer many
solutions to help connect
equipment and services in Jumper, AARC (2 fiber Plug) to LC Duplex, Singlemode
rugged outdoor or industrial Outdoor
environments. Offering industry
standard assemblies as well as
custom engineered solutions,
Amphenol’s offering will ensure
continued system performance
while protecting valuable
equipment from the elements.
Telecommunication
PT/LC PT/MPO
RECEPTACLE, PT/LC, BAYONET ADAPTER, PT/MPO to LC

Receptacle, PT/LC, Bayonet, Rear mount jam nut style For Receptacle, PT/MPO, Front mount jam nut style For more
more detailed information and customized options please detailed information and customized options please
contact Amphenol customer service for assistance. contact Amphenol customer service for assistance.
ADAPTER, PT/MPO to PT/MPO (In-Line)

Receptacle, PT/MPO, In-Line Jam Nut Mount For more
detailed information and customized options please
contact Amphenol customer service for assistance.
Telecommunication
R2CT Service Cables (Node Cables)
The R2CT Field Installable Weatherproof Cable Gland Amphenol’s Service Cable Assemblies are primarily used
is designed as a cost effective means of providing a to link the fiber optic transport cable directly to the fiber
removable interface for applications requiring protection optic processing equipment. This connection is critical
from wet or dirty environments. The R2CT allows for and requires an environmental seal between the cable
quick and easy installation onto either Optical LC or RJ45 and the node housing. Amphenol’s Service Cables utilize
style outdoor cable assemblies. The system can be field a unique feed-through adapter, featuring an anti-twist
assembled over previously deployed optical duplex LC coupling body. The anti-twist feature, allows the coupling
or RJ45 Ethernet cable assemblies. Factory terminated body to be secured to the outdoor housing, without
cable assemblies with the R2CT connector housing twisting of the cable. Amphenol’s Service Cables also
pre-installed are available for faster implementation use a fully water blocked loose tube cable, with either
and IP67 sealing in new deployments. The R2CT allows armored or non-armored versions available. Assemblies
direct mating to edge mounted active devices or as can be equipped with a variety of breakout lengths, fan-
a sealed feed-thru to adapters or internally mounted out types or connector options.
devices. The R2CT Gland is also suitable for use as a feed-
through interface for other type power, signal and fiber Plastic Feed-Through Adapter
applications. Amphenol’s R2CT Field Installable cable For more detailed information and customized options
glands are exceptionally suited for WiMax, LTE, wireless, please contact Amphenol customer service for assistance.
and base station applications.
Standard Feed-Through Adapter
• R2CT Plug Kit, Optical -Long For more detailed information and customized options
please contact Amphenol customer service for assistance.
• R2CT Plug Kit -RJ45 Short
• Receptacle, R2CT with Metal Sealing Dust Cap
• Receptacle, R2CT with vinyl shipping dust cap
Telecommunication
TxRx Group
Description
The 957 series Harsh Environment Interconnect system Jumper, TxRx LC/SFP to LC Duplex
is designed to provide direct connection of an outdoor Jumper, LC/SFP to LC Duplex, Singlemode 2 Fiber
sealed connector to a board mounted device within a
sealed enclosure. The TxRx system can connect Optical Jumper, TxRx LC/SFP to LC/SFP
SFF or SFP transceivers, or RJ-45 Jacks through the sealed Jumper, LC/SFP to LC/SFP, Singlemode 2 Fiber
receptacles. The system is designed to provide IP-67 dust
and water protection when connector and receptacle Receptacle, TxRx LC/SFP, Flange Mount
are mated or with dust caps installed. Plug cap includes Receptacle, LC/SFP Optical, front flange mount
integrated pulling eye for easy installation. Optical LC/SFP
assemblies are factory assembled for quick and reliable Connector Kit, TxRx RJ45 Field Install
installation and are available in custom length pigtails or Plug Kit, RJ/SFP, RJ45 shielded
jumpers. Copper RJ/SFP are available as either a factory
terminated assemblies or a field installable connector kit. Receptacle, TxRx RJ45, Flange Mount
RJ plug includes features for use with shielded category Receptacle, RJ/SFP, front flange mount
cables. Both types use a common receptacle footprint,
allowing a single casting or enclosure mounting to be CAP, PLUG, CONN, BAYONET
used with different media types. Dust Cap, PT Plug, Bayonet with 160mm chain
CAP, PLUG, RECEP, BAYONET

Dust Cap, TxRx Receptacle, with chain
CAGE, SFP 1X1, NON-LATCHING

Cage, SFP Non-latching, Press fit
CONNECTOR, SFP 20 POS., HIGH

Connector, SFP right angle 20 pin, SMT
JACK, RJ45, 8P, SMT

Jack, RJ Shielded SMT Mount Cat 3/4
Telecommunication
Connectors and
Adapters FC Connectors and Adapters
Amphenol’s 944 Series fiber optic FC connectors

Since 1932, from the first industry
effectively terminate optical fiber in a variety of network
standard 905 Series SMA to the applications. The connectors are secured using a
advanced LX.5 small form-factor threaded coupling nut, providing a significant increase
connector system and high density in pull-out performance. The FC connectors also feature
an internal cavity and epoxy injection tube that virtually
MPO multi-fiber interconnects, eliminates the possibility of improper epoxy application,
Amphenol leads innovation in thus providing higher manufacturing yields. Every aspect
fiber optic connector technology. of the connector system is precision manufactured to
produce reliable and consistent performance. The 944
Amphenol offers a complete line
series is available in tunable or non-tunable PC versions
of fiber optic connectors and for flexibility in specific performance requirements. The
adapters including SMA, ST, FC, FC/APC connector system features a tight-fit keyway that
SC, LC, LX.5, MPO and Hybrilink™ prohibits the possible mis-mating between FC/PC and FC/
APC connectors.
converting adapters.
Top grade ceramic ferrules ensure Features/Benefits
the best optical performance and • One-piece construction
• Non-optical disconnect feature design prevents signal
polishing yield. Carefully selected
interruption
engineering plastics withstand the • Teflon tube in rear of connector ensures clean epoxy
most demanding environmental injection
stress conditions. High quality • High precision zirconia ferrules minimize insertion loss
and return loss values
materials ensure the long-term • Available in singlemode, angled singlemode, and
reliability and performance of multimode versions
Amphenol connectors. • Available with 900μm, 2.0mm, or 3.0mm boots
• Tunable version available
• Stainless steel ferrules also available
• Compliant to IEC 61874-7 and TIA/EIA 604-4
specifications
Telecommunication
LC Connectors and Adapters MPO Adapters
Amphenol’s data communications 956 Series fiber optic Amphenol’s MPO adapters provide a wide variety
LC small form factor (SFF) connectors utilize the familiar of options for connecting high density MPO/MTP®
RJ-45 latching mechanism. The LC connector is almost connectors. Made in both die-cast and thermoplastics,
half the size of the popular SC connector, providing great Amphenol MPO adapters are precision manufactured
space savings in the network. With accelerated growth to ensure intermateability with industry standard
demanding greater bandwidth in less physical space, assemblies and connectors. Available with various flange
LC connectors have emerged as a viable solution for styles, Amphenol MPO adapters meet the challenges and
high density frames and patch panels. Amphenol’s 956 mechanical requirements of highly dense system designs
Series LC connectors are a high density low cost solution while maintaining industry standard footprints.
without any sacrifice of performance. The 956 series LC The one-piece body die cast version is available to meet
connectors are compliant to the EIA/TIA-604 and IEC the growing need for connectors to assist in preventing
61754. EMI leaks.
An optional innovative feature of the MPO adapters is
Features/Benefits the patented fully automatic shutter. This internal shutter
• Easy RJ45 coupling mechanism enables quick mechanism requires no manual actuation and has a
installation and the audible click signifies when unique stepped design that prevents contact with the
connector is locked in place ferrule endface.
• Pull proof design prevents signal interruption Amphenol has expanded its line of MPO adapters to
• Small form factor size enables increased density include plastic adapters with matched keyways, where
compared to standard connectors the keys are aligned on same side of the adapter to
• Duplex version utilizes a removable flexible clip reverse the fiber positions.
providing a float between channels A and B
• Singlemode and multimode versions Features/Benefits
• Available with 900μm, 900μm Behind the Wall (BTW), • Meets IEC 61754-7 and TIA/EIA 604-5 intermateability
Short, 1.6/2.0mm, or 3.0mm boots standards
• Multiple boot color options • Accepts industry standard MPO/MTP®interfaces
• Angled boots also available (50 degree, 90 degree, and • Plastic or EMI protective die-cast versions
flexible boot from 0 to 90 degree) • Multiple flange options including standard, rotated, or
reduced
• Optional internal shutter mechanisms on both sides of
the adapter to assist in eye safety requirements
• Shutter requires no manual actuation
• Flange on die-cast version completely covers panel
cutout
• Matched keyway option available
Telecommunication
SC Connectors and Adapters ST Connectors and Adapters
Amphenol’s premier high performance fiber optic 954 Amphenol’s 953 Series fiber optic ST and ST II connectors
Series SC connectors utilize a push pull retention feature utilize a bayonet style mating concept to provide a secure,
enabling easy insertion and removal, making it ideally robust coupling mechanism. The enclosed spiral slotted
suited for high-density applications. The SC connector coupling nut allows easy insertion in densely packed
features an internal cavity and epoxy injection tube that patch panels.
virtually eliminates the possibility of improper epoxy The ST connector has been used extensively in telecom,
application, thus providing higher manufacturing yields data premise installation, and test lab applications.
and superior quality. Special attention has been given to every ST performance
Amphenol’s 954 Series SC connectors are compliant to parameter, increasing product repeatability and exceeding
the EIA/TIA-604, IEC 60874, and fully tested by a third industry standards. The ST connector is available with a
party test lab per Telcordia GR-326 specifications. plastic or die cast body with a ceramic or stainless steel
ferrule.
Features/Benefits
• Third party tested per Telcordia GR-326 Features/Benefits
• Easy push pull coupling mechanism enables quick • The ST connector body and coupling nut are precision
installation and the audible click signifies when molded with a flame retardant polymer for a durable
connector is locked in place and light weight product
• Pull proof design prevents signal interruption • The STII connector body and coupling nut are precision
• Teflon tube in rear of connector insures clean epoxy zinc die cast and nickel plated for superior strength and
injection corrosion resistance
• Duplex version utilizes a removable flexible clip • High precision zirconia ferrules minimize insertion loss
providing a float between channels A and B and return loss values
• High temperature and UL 94-V0 rated plastic housing • Available in singlemode and multimode versions
and boots available in multiple colors • Available with 900μm, 2.0mm, or 3.0mm boots
• Tight tolerance ferrules for low loss performance • Stainless steel ferrules also available on both the ST
• Available in singlemode, angled singlemode, and and ST II connectors
multimode versions
• Available with 900μm, 2.0mm, 3.0mm, and 90 degree
boots in multiple colors
Telecommunication
In-line Attenuators
Amphenol’s Fixed In-Line Attenuators provide a medium

for adjusting the transmission signal. The slender
packaging design is well suited for installation into
OEM equipment. In-line attenuators area available
with attenuation values ranging from 1-20 dB and can
be terminated with any single mode connector or left
unterminated for splicing.
Attenuators • LC
• Open
• SC
Optical attenuators have proven • SC Angle
to be a critical component of any • ST
fiber optic network by allowing the
adjustment of signal transmission
into the dynamic range of the
receiver.
Telecommunication
Plug Attenuators Mode Conditioning Plug
Amphenol’s fixed plug style attenuators are fully Amphenol’s MC Plugs are designed for use in Gigabit
qualified to Telcordia GR-910 requirements. The all Ethernet applications and are compliant with the IEEE
fiber construction is proven to be ideally suited for 802.3z standards. the use of mode conditioning plugs
optical networks with both controlled and uncontrolled significantly increases the performance and applicable
temperatures, where the source wavelenght can vary due distances of laser diodes (LD) over multimode fiber
to ambient temperature. networks.
• Angle FC • LC
• Angle SC • SC
• FC/UPC
• LC/UPC
• SC/UPC
Terminators Loopback
Amphenol’s optical terminators are designed to reduce Amphenol’s loopbacks are used primarily as a means to
the back reflection from open connectors. This increases test optical links in networks or devices by “looping back”
network performance and reduces stray laser light that the connections from the TX (transmit) pairs to the RX
can potentially cause eye injury. With increased power (receive) pairs. By doing this, a complete optical link is
levels being utilized in every maket sector, there is an ever formed, allowing the optical performance evaluation of a
increasing demand for optical terminators. discrete component or a complete link in a network path
FC: covering one or more interfaces.
SC:
SC:
Telecommunication
Cable Clamps
Amphenol 948 Series Cable Clamp provides a unique

method for securing fiber optic cables. Each cable clamp
Fiber Management includes a multi-diameter module that perfectly fits
any size cable in its range. The multi-diameter modules
easily adapt to fit fiber optic cables simply by removing
The Amphenol Fiber Management a few layers from its center core. This unique method of
Systems product line is comprised securing the cable provides excellent protection and axial
of a complete series of high clamping.
density panels, MPO cassettes,

wall and rack mounted enclosures
that are designed to be used for
the distribution and management
of fiber optic cables. The product
offering includes a variety of
enclosures for patching, splicing,
distribution, storing, splitting, and
coupling of fiber optic signals for
both single mode and multimode
cables.
Telecommunication
High Density Panels Rack Mount Distribution Panels
• New HD Panel Series The Amphenol Fiber Amphenol 948 Series Rack Mount
• Higher density panels allow for more capacity Distribution Panels combine all the features of a patch
• 4 adapter packs/MPO cassettes per 1RU versus 3 on panel and a splice panel into one enclosure. They provide
standard panels a protective area for patching, splicing and storing fiber
optic cables. Distribution panels are typically used at
building entrances, telecom closets, customer premise
Fiber Capacity for HD Panels applications, or in equipment rooms for termination of
inter-building backbone cables. Combining the patching
Panel Type 1RU 2RU 4RU
and splicing in one enclosure eliminates unnecessarily
Cassette/packs 4 8 16 exposing fiber optic cables which are vulnerable when
SC Simplex 24 48 96 utilizing separate enclosures for patching and splicing.
The Rack Mount Distribution Panel fully encloses the
SC Duplex 48 96 192
pigtails (usually routed between separate panels),
LC Duplex 48 96 192 providing greater protection and shorter cable lengths.
LC Quad 96 192 384 The enclosures provide ample fiber optic cable storage
within a removable drawer. Each drawer accommodates
up to two splice trays for a total of 48 fusion splices.
Rack Mount Distribution Panels are used in backbone
intermediate and horizontal cross-connects, equipment
rooms, building entrances, head-ends, central offices,
computer rooms and customer premise applications.
MPO Cassettes
Amphenol’s MTP®/MPO Cassettes provide a seamless

connection between MPO backbone cables and SC or
small form factor LC patching in the network environment.
This pre-terminated modular system is easily deployed
and simplifies future expansions and modifications. In one
cassette option, the MPO adapter is uniquely positioned
at the back of the cassette with a downward angle to
provide a more optimal orientation for routing. MPO
Cassettes are ideally suited for data centers, enterprise,
and datacom networks.
Telecommunication
Rack Mount Patch Panels Rack Mount Splice Panels
Amphenol 948 Series Patch Panels provide a convenient Amphenol 948 Series Splice Panels are rack mounted
point for patching and storing fiber optic cables. A panels which provide a convenient point for on-rack
full range of products are available for termination of storing and protecting of fiber optic splices. These panels
backbone cables and horizontal cables at cross-connects are typically used at building entrances for transition
and for inter-connection between fiber optic distribution splicing between the outdoor cables and indoor pigtails.
cables and equipment jumper cables. The Rack Mount They are typically used in conjunction with the 948 Series
Patch Panels can be used in both cross-connect and Patch Panel enclosures. The Rack Mount Splice Panel
interconnect applications. Pre- terminated multi-channel incorporates splicing within the fiber optic network bays.
fiber optic pigtails are excellent for reducing installation These enclosures are ideal for splicing a pre-terminated
costs and installer handling. The patch panel pigtail can patch panel pigtail to the OSP cable. The enclosures
be quickly and easily routed to the splicing location, provide ample fiber storage within a removable drawer.
eliminating the need for performing field terminations. Each drawer can accommodate up to two splice trays
Rack Mount Patch Panels are used in backbone for a total of 48 fusion splices. Rack Mount Splice Panels
intermediate and horizontal cross-connects, equipment are used in backbone intermediate and horizontal cross-
rooms, building entrances, headends, central offices and connects, equipment rooms, building entrances, head-
computer rooms. ends, central offices and computer rooms.
Splice Trays
Amphenol 948 Series Splice Trays provide an organized

means of storing and protecting completed fiber optic
splices. Bend radius protection and covers prevent fibers
from being damaged during handling. Splice trays are
included with Amphenol Splice and Distribution Panels
Telecommunication
Wall Mount Distribution Panels Wall Mount Patch Panels
The Amphenol Fiber Amphenol 948 Series Wall Mount Amphenol 948 Series Patch Panels provide a convenient
Distribution Panels combine all the features of a patch point for patching and storing fiber optic cables. A
panel and a splice panel into one enclosure. They provide full range of products are available for termination of
a protective area for patching, splicing and storing fiber backbone cables and horizontal cables at cross-connects
optic cables. Distribution panels are typically used at and for inter-connection between fiber optic distribution
building entrances, telecom closets, customer premise cables and equipment jumper cables. The Wall Mount
applications, or in equipment rooms for termination Patch Panel is designed to be compact as well as provide
of interbuilding backbone cables. The Wall Mount ample fiber optic cable routing, organization, and storage.
Distribution Panel is designed to be compact as well as The panels come equipped with a cam lock in the installer
provide ample fiber optic cable routing, organization, side (large door) of the panel, allowing unrestricted access
and storage. The panels come equipped with a cam lock to the patching side. A second factory-installed cam lock
in the installer side (large door) of the panel, allowing is available to lock both areas of the panel. Wall Mount
unrestricted access to the patching side. A second factory- Patch Panels are used in backbone, intermediate and
installed cam lock is available to lock both areas of the horizontal cross-connects, equipment rooms, building
panel. Splice trays are also included with each enclosure. entrances, telecommunications closets, computer rooms
Wall Mount Distribution Panels are used in backbone and customer premise applications.
intermediate and horizontal cross-connects, equipment
rooms, building entrances, telecommunications closets,
computer rooms and customer premise applications.
Telecommunication
[email protected]
www.amphenol.com.tr

Amphenol Telecommunication Aug2015

Uploaded by

Copyright:

Available Formats

Amphenol Telecommunication Aug2015

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Amphenol Telecommunication Aug2015

Uploaded by

Copyright:

Available Formats

What products does Amphenol Antenna Solutions offer?

What products does Amphenol Antenna Solutions offer?

What are some of the base station antenna models offered by Amphenol Antenna Solutions?

What are some of the base station antenna models offered by Amphenol Antenna Solutions?

Telecommunication

Amphenol Antenna Solutions is a division of Amphenol

Small Cell, DAS and Indoor Antennas

Base Station Antennas

SlimLine Antennas UltraLine Antennas

Low Visual Impact Evolutional LTE Platform

View from the bottom of the

CylLine Antennas In-Building / Microcell Antennas

CylLine antennas are a series Product Description

Integrated RET (MDCU)

TRIO antennas are 3-sector base station antennas concealed

The product range includes Wideband, Twin-Wideband,

TRIO antennas are RET capable and selected models are

Accessories such as TRIO extension canisters, lightning

TRIO Product Features

InBuilding/Microcell/DAS antennas available from Amphenol.

Microcell Ceiling Mount Omni Shrouded Yagi

M icrocell Ceiling Mount Tr i-Sec tor

M ic rocell Pane l Om ni-Dir ec t ional

M ic ro c e l l E n d - Fed Omni Dish Refl ec tor

and variable electrical tilt options.

VHF/UHF & SHF Antennas

Directional Antennas Omnidirectional Antennas

Indoor/Microcell Antennas (TETRA) SOF230™ Special Forces Antenna Kit

MULTILITE™ Tactical Antenna (MTA)

Multi̇-Confi̇gurati̇on Hf Tacti̇cal Antenna Sy

Microwave Antennas Automobile Antennas

½ wave, 5/8 wave and collinear to suit your specific

Our Private Networks division offers a bespoke

Amphenol Antenna Solutions operates from

Antennas for rof sannetnA

Amphenol coaxial connectors for corrugated coaxial Type N

7/16 RF Panel Mount Connectors

Description • Different designs for pin termination

Features/Benefits Coaxial Feeder Cables

• Excellent VSWR and PIM performance

RF Pig Tail Jumpers

• 100% PIM performance testing

Surge Arrestors Couplers & Splitters

Product Description Product Description

Available with N and DIN 7-16 interfaces

Tower Mount Amplifiers Diplexers & Triplexers

Product Description Product Description

Standard Cable Clamp

Indoor Earthing Kit, Clamp Type

Earthing Kits Cable Clamps

Product Description Product Description

Indoor Earthing Kit, Clip Type

Leakage Cable Clamp

Outdoor Earthing Kit – Strap Type

Outdoor Earthing Kit – Spring Type

Additional BTS Accessories

Hybrid Cell Tower Cables Power Cables

1 5/8 DIN Female 1 5/8 N Male

1/2 DIN Female

7/8 DIN Male