0% found this document useful (0 votes)
386 views29 pages

RNO Parameter

This document provides default parameter values and proposal values for a BSC6000V900R008C12 base station controller. It includes parameters for the BSC version, TRX configuration, cells, power control, and handover configuration. The parameter values are used to configure aspects of the radio network such as speech coding, cell access controls, transmission power levels, and handover thresholds and timers.

Uploaded by

Amitabh Mishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
386 views29 pages

RNO Parameter

This document provides default parameter values and proposal values for a BSC6000V900R008C12 base station controller. It includes parameters for the BSC version, TRX configuration, cells, power control, and handover configuration. The parameter values are used to configure aspects of the radio network such as speech coding, cell access controls, transmission power levels, and handover thresholds and timers.

Uploaded by

Amitabh Mishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 29

Unitech GSM RNO Parameter Baseline

BSC Version

BSC6000V900R008C12

Version

Date

Remark

V1.0

7/10/2009

Direct Retry, AMR, GPRS, EGPRS, Huawei III Power Control,


Handover

V9R8C12

Default Value

TRX No.
Administrative State
Cell Index
Cell Name
Site Index
Site Name
Board Type
Active State
Abis Mode
Cabinet No.
Subrack No.
Slot No.
TEI
Out-BSC Subrack No.
Out-BSC Slot No.
Out-BSC Port No.
Out-BSC Timeslot No.(8K)
RSL In Site Timeslot No.(8K)
RSL Logic No.
TRX Priority
Priority of Power Amplifier Turning Off
Shut Down Enable
Abnormal Warn Threshold
Abnormal Release Threshold
Statistical Period of No-Traffic(5min)
Wireless Link Alarm Critical Permit
WLA Prompting Recover Period(5min)
Begin Time of WLA Detection(hour)
End Time of WLA Detection(hour)
Uplink and Downlink Balance Basic Difference
Uplink and Downlink Balance Floating Range
Uplink and Downlink Balance Alarm Threshold
Receive Mode
Send Mode
Allow Shutdown of TRX Power Amplifier
Hopping Antenna Index
Power Finetune
TRX Antenna Hopping
Reverse Out-BSC Slot No.
Reverse Out-BSC Port No.
Reverse Out-BSC Timeslot No.(8K)
Reverse RSL In Site Port No.
Reverse RSL In Site Timeslot No.(8K)
Transmission Type of Abis Interface
Maximum PDCH numbers of carrier
MaxAbisTSOccupied
InHDLCIndex
HubHDLCIndex
TRXNoInHub
XPU Slot No.
TRX Ability
PhysicalPassNo
Priority
QTRU Priority
RevInHDLCIndex
Time Slot Power Reserve
Frequency Reuse Mode
Power Overload Threshold In Ho. Out(VA)

GRFU
Activated
Auto
0
3
0
2
0
18
0
252
252
2095
Level0
Level0
Enable
100
50
48
Yes
12
8
22
8
30
80
Main Diversity
Transmitter Independent or Combining
No
255
Default
None
255
255
255
255
255
TDM
8
32
65535
65535
255
0
3
1
255
255
65535
0
Loose
15

Proposal Value

No

Main Diversity
Transmitter Independent or Combining
No

Power Overload Threshold In Ho. In(VA)

Remark

Should modify according to physical connection


Should modify according to physical connection

V9R8C12
Cell Index
Cell Name
Site Index
Site Name
Frequency Band
Administrative State
Layer of the Cell
MCC
MNC
LAC(DEC)
CI(DEC)
NCC
BCC
Cell Priority
Active State
PCU
Support GPRS
Support EDGE
8PSK power attenuation grade
Level report switch
Cell Band
RAC
Encryption Algorithm
FH MODE
TCH/F Use Downlink DTX
MAX TA(bit period(1 bit=0.55km))
Cell Extension Type
Cell Antenna Hopping
TCH/H Use Downlink DTX
Enhanced Concentric Allowed
Cell Type
Same Group Cell Index
Attributes of UL And OL Subcells
BCCH Concentric Attribute
TCH/F Uplink DTX
Call Reestablishment Forbidden
RXLEV_ACCESS_MIN
TCH/H Uplink DTX
TCH Immediate Assignment
Direct Retry
SDCCH Dynamic Allocation Enabled
UL PC Allowed
DL PC Allowed
Allow Dynamic Shutdown of TRX Power Amplifie
Allow Dynamic Voltage Adjustment

Default Value

Proposal Value

Remark

DCS1800
Unlocked
3

Prior-1
Activated
support GPRS
Yes
0
Support
DCS1800
00001001
RF FH
Yes
62
Normal cell
None
Yes
No
Normal Cell
65535
NONE
None
Shall Use
Yes
8
Shall Use
No
Yes
Yes
Yes
Yes
Yes
Yes

DCS1800
Decided by Encryption Strategy

None

No

V9R8C12

Default Value

Proposal Value

Cell Index
Cell Name
Site Index
Site Name
Attach/Detach Allowed
Yes
Tx-integer
32
Cell_Bar_Access
No
NCC Permitted
11111111
BS_AG_BLKS_RES
2
2
CCCH Conf
1 Non-compounding CCCH1 Non-compounding CCCH
BS-PA-MFRAMS
2 Multiframe Period
2 Multiframe Period
Period of Periodic Location Update(6 minut
20
20
Additional Reselect Param Indication
Automatic
CRH(dB)
6
PI
Yes
Cell_Bar_Qualify
No
CRO(2dB)
0
PT(s)
0

Remark

V9R8C12

Default Value

Proposal Value

Cell Index
Cell Name
Site Index
Site Name
Speech Version
101111
101111
TRX Aiding Function Control
Allowed & Recover When Check Res
SACCH Multi-Frames(SACCH period (480ms))
32
RACH Busy Threshold
16
T200 SDCCH(5ms)
60
T200 FACCH/F(5ms)
50
T200 FACCH/H(5ms)
50
T200 SACCH TCH SAPI0(10ms)
150
T200 SACCH TCH SAPI3(10ms)
200
T200 SACCH SDCCH(10ms)
60
T200 SDCCH SAPI3(5ms)
60
Paging Times
4
Random Access Error Threshold
180
Use LAPDm N200
No
N200 of Establish
5
N200 of FACCH/Full rate
34
Use Imm_Ass Retransmit Parameter
No
Max Delay of Imm_Ass Retransmit(ms)
4
AHR SACCH Multi-Frames(SACCH period (480
32
AFR Radio Link Timeout(SACCH period (480ms
64
AHR Radio Link Timeout(SACCH period (480ms
52
MSC Version Indication
R98 or R98 below
MS MAX Retrans(Time)
4
Common Access Control Class
0000000000
Special Access Control Class
00000
Emergent Call Disable
No
Radio Link Timeout(SACCH period (480ms))
52
ECSC
Yes
Power Deviation Indication
Yes
Power Deviation(2dB)
1
MBR
2
Invalid BSIC Reporting
No
1800M Reporting Offset
0
1800M Reporting Threshold
0
Immediate Assignment Opt.
No
Short Message Uplink Disabled
No
Short Message Downlink Disabled
No
Allow Reassign
Yes
Allow EMLPP
No
Max Assignment Retry Times
1
AMR Rate Adjustment Switch
Algorithm I
Auto Adjust UL Threshold and Hysteresis (F)
No
AMR ACS(F)(Kbps)
10100101
AMR UL Coding Rate adj.th1(F)
15
AMR UL Coding Rate adj.th2(F)
19
AMR UL Coding Rate adj.th3(F)
28
AMR UL Coding Rate adj.hyst1(F)
2
AMR UL Coding Rate adj.hyst2(F)
3
AMR UL Coding Rate adj.hyst3(F)
3
AMR DL Coding Rate adj.th1(F)
12
AMR DL Coding Rate adj.th2(F)
17
AMR DL Coding Rate adj.th3(F)
25
AMR DL Coding Rate adj.hyst1(F)
2
AMR DL Coding Rate adj.hyst2(F)
3
AMR DL Coding Rate adj.hyst3(F)
3

Yes

Remark

AMR Starting Mode(F)


Auto Adjust UL Threshold and Hysteresis (H)
AMR ACS(H)(Kbps)
AMR UL Coding Rate adj.th1(H)
AMR UL Coding Rate adj.th2(H)
AMR UL Coding Rate adj.th3(H)
AMR UL Coding Rate adj.hyst1(H)
AMR UL Coding Rate adj.hyst2(H)
AMR UL Coding Rate adj.hyst3(H)
AMR DL Coding Rate adj.th1(H)
AMR DL Coding Rate adj.th2(H)
AMR DL Coding Rate adj.th3(H)
AMR DL Coding Rate adj.hyst1(H)
AMR DL Coding Rate adj.hyst2(H)
AMR DL Coding Rate adj.hyst3(H)
AMR Starting Mode(H)
Abis Resource Adjustment TCHH Function Swit
Repeated Downlink FACCH
Repeated Downlink FACCH Threshold
Repeated SACCH
Emergency Call Preemption Permitted
EMC Priority Level
AMR TFO Switch
AMR Uplink Adaptive Threshold Allowed
Long-term FER Upper Threshold
Long-term FER Lower Threshold
Long-term FER Target
Threshold Adjust Factor

1
No
010101
23
31
63
3
4
15
23
31
63
3
4
15
0
No
No
5
No
OFF
15
OFF
No
60
2
8
2

Yes

V9R8C12

Default Value

Proposal Value

Cell Index
Cell Name
Site Index
Site Name
PC Interval
Power Control Algorithm Switch
HwIII Number of lost MRs allowed
HwIII Up Link Power Control Adjust Period
HwIII Down Link Power Control Adjust Period
HwIII Signal Channel Discard MR Number
HwIII Traffic Channel Discard MR Number
HwIII DL RexLev Exponent Filter Length
HwIII DL Rex Qual. Exponent Filter Length
HwIII DL RexLev Slide Window
HwIII DL Rex Qual. Slide Window
HwIII DL RexLev Adjust Factor
HwIII DL Rex Qual. Adjust Factor
HwIII DL RexLev Upper Threshold
HwIII DL RexLev Lower Threshold
HwIII DL FS Rex Qual. Upper Threshold(dB)
HwIII DL FS Rex Qual. Lower Threshold(dB)
HwIII DL HS Rex Qual. Upper Threshold(dB)
HwIII DL HS Rex Qual. Lower Threshold(dB)
HwIII DL AFS Rex Qual.Upper Threshold(dB)
HwIII DL AFS Rex Qual.Lower Threshold(dB)
HwIII DL AHS Rex Qual.Upper Threshold(dB)
HwIII DL AHS Rex Qual. Lower Threshold(dB)
HwIII DL MAX DownStep(dB)
HwIII DL MAX UpStep (dB)
HwIII UL RexLev Exponent Filter Length
HwIII UL Rex Qual.Exponent Filter Length
HwIII UL RexLev Slide Window
HwIII UL Rex Qual. Slide Window
HwIII UL RexLev Adjust Factor
HwIII UL Rex Qual.Adjust Factor
HwIII UL RexLev Upper Threshold
HwIII UL RexLev Lower Threshold
HwIII UL FS Rex Qual. Upper Threshold(dB)
HwIII UL FS Rex Qual. Lower Threshold(dB)
HwIII UL HS Rex Qual.Upper Threshold(dB)
HwIII UL HS Rex Qual.Lower Threshold(dB)
HwIII UL AFS Rex Qual.Upper Threshold(dB)
HwIII UL AFS Rex Qual.Lower Threshold(dB)
HwIII UL AHS Rex Qual.Upper Threshold(dB)
HwIII UL AHS Rex Qual.Lower Threshold(dB)
HwIII UL MAX DownStep(dB)
HwIII UL MAX UpStep(dB)
HwIII MA FreqHop Gain 1(0.1dB)
HwIII MA FreqHop Gain 2(0.1dB)
HwIII MA FreqHop Gain 3(0.1dB)
HwIII MA FreqHop Gain 4(0.1dB)
HwIII MA FreqHop Gain 5(0.1dB)
HwIII MA FreqHop Gain 6(0.1dB)
HwIII MA FreqHop Gain 7(0.1dB)
HwIII MA FreqHop Gain 8(0.1dB)
Power Control threshold Adjust for SAIC
HwIII threshold Adjust for SAIC
AMR SACCH Doload Power Upgrade
Power Forecast Allowed
Combiner Loss(0.1dB)

3
HWIII Power Control
5
3
2
1
3
3
3
1
1
3
6
35
25
16
16
18
18
14
14
16
16
4
8
3
3
1
1
3
6
30
20
16
16
18
18
14
14
16
16
6
8
0
0
0
0
0
0
0
0
1
3
0
No
45

5
3
2
2

25
25

23
23

1
3

Remark

Double Antenna Gain(0.1dB)


Path Loss of Different Frequency Band(0.1dB)
0.2dB Power Control Enable
Expected DL RX_LEV
Expected UL RX_LEV
SAIC Allowed
HwIII Power Control Optimized Enable
HwIII UL Filter Adjust Factor
HwIII DL Filter Adjust Factor
HwIII UL RexLev Protect Factor
HwIII UL RexQual Protect Factor
HwIII DL RexLev Protect Factor
HwIII DL RexQual Protect Factor

30
79
No
30
30
No
No
3
3
6
75
5
55

No

V9R8C12
Cell Index
Cell Name
Site Index
Site Name
Min Interval for TCH HOs
Min Interval for SDCCH HOs
Min Interval for Consecutive HOs
Min Interval for Emerg.HOs
Inter-BSC SDCCH HO ALLowed
Co-BSC/MSC Adj
SDCCH HO Allowed
Penalty Allowed
Intracell HO Allowed
MS Fast Moving HO Allowed
Rx_Level_Drop HO Allowed
PBGT HO Allowed
Edge Handover Allowed
BQ HO Allowed
Filter Length for Ncell RX_LEV
Filter Length for TA
Penalty Level after HO Fail
Penalty Level after BQ HO
Penalty Time after BQ HO(s)
Penalty Level after TA HO
Penalty Time after TA HO(s)
TA Threshold.
DL Qual. Threshold
UL Qual. Threshold
Uplink Level Short-term Filter Length
Filter Parameter A1
Filter Parameter A2
Filter Parameter A3
Filter Parameter A4
Filter Parameter A5
Filter Parameter A6
Filter Parameter A7
Filter Parameter A8
Filter Parameter B
No Dl Mr.HO Allowed
No Dl Mr.Ul Qual HO Limit
Cons.No Dl Mr.HO Allowed Limit
Edge HO UL RX_LEV Threshold
Edge HO DL RX_LEV Threshold
Edge HO Watch Time(s)
Edge HO Valid Time(s)
Edge HO AdjCell Watch Time(s)
Edge HO AdjCell Valid Time(s)
PBGT Watch Time(s)
PBGT Valid Time(s)
MAX Consecutive HO Times
Forbidden time after MAX Times
Interval for Consecutive HO Jud.
Cell Type
Min UP Power on HO Candidate Cell
Min DL Power on HO Candidate Cell
UL Expected Level at HO Access
K Offset
Intracell F-H HO Allowed

Default Value

2
2
4
4
No
Yes
No
Yes
No
No
No
Yes
Yes
Yes
4
4
30
63
10
63
30
255
55
55
3
10
10
10
10
10
10
10
10
0
No
50
8
10
20
3
2
3
2
3
2
3
20
6
Normal Cell
0
10
30
0
Yes

Proposal Value

No

No

Yes

10
20
3
2
3
2

10
15
30

Remark

Intracell F-H HO Stat Time(s)


Intracell F-H HO Last Time(s)
F2H HO Threshold
H2F HO Threshold
Penalty Time after AMR TCHF-H HO Fail
Same Group Cell Index
Total Number of Measurements(s)
Number of Satisfactory Measurements(s)
Inner Cell EDGE HO Enable
Filter Length for SDCCH NBR_RCVD_
Filter Length for TCH NBR_RCVD_BLO
Inner Cell Serious OverLoad Threshold(
Serving Cell Filter Length MR Number
Neighbor Cell Filter Length MR Number
Number of Ignored Measurement Report
RXQUAL1
RXQUAL2
RXQUAL3
RXQUAL4
RXQUAL5
RXQUAL6
RXQUAL7
RXQUAL8
RXQUAL9
RXQUAL10
RXQUAL11
RXQUAL12
RXLEVOff
DtxMeasUsed
ATCBHoSwitch
DLQuaLimitAMRFR
ULQuaLimitAMRFR
DLQuaLimitAMRHR
ULQuaLimitAMRHR
ReceiveQualThrshAMRFR
ReceiveQualThrshAMRHR
HO Control Switch
TA HO Watch Time(Num of MR)(0.5s)
TA HO Valid Time(0.5s)
BQ HO Watch Time(0.5s)
BQ HO Valid Time(0.5s)
HCS HO Watch Time(0.5s)
HCS HO Valid Time(0.5s)
Interfere HO Static Time(0.5s)
Interfere HO Valid Time(0.5s)
Penalty Time on Load HO
Penalty Value on Load HO
Penalty Time on Interfere HO
Better Cell Handover Enable
Better Cell HO Watch Time(s)
Better Cell HO Valid Time(s)
DLevOffset For Interfere HO(dbm)
DQualOffset For Interfere HO
ULevOffset For Interfere HO(dbm)
UQualOffset For Interfere HO
IniLev For EnUtoO Load HO
NCell Filter Length for SDCCH Level
TA Filter Length for SDCCH Level
Inter RAN Load Based Handover Allowe
Inter BSC Load Based Handover Allowed

5
4
25
12
10
65535
5
4
YES
2
6
90
4
4
1
60
50
49
48
47
46
45
44
43
42
41
40
5
Open
Close
60
60
55
55
50
40
HO Algorithm I
1
1
1
1
3
2
3
2
10
63
15
Yes
3
2
0
0
0
0
63
2
2
No
No

25
12

HO Algorithm I
1
1
1
1
3
2
3
2

3
2
0
0

Yes

UL BQ HO Static Time(0.5s)
UL BQ HO Last Time(0.5s)
IntraCell AMR TCHFTCHH Ho Allowed
IntraCell AMR TCHFTCHH Traffic Threshold
IntraCell TCHF-TCHH Ho Duration(s)
IntraCell TCHF-TCHH Ho Period(s)
IntraCell AMR TCHF-TCHH Ho Pathloss A
IntraCell AMR TCHF-TCHH Ho ATCB Adj
IntraCell AMR TCHF-TCHH Ho Pathloss
IntraCell TCHF-TCHH Pathloss Offset Ov
IntraCell AMR TCHF-TCHH Ho ATCB Thr
IntraCell TCHF-TCHH ATCB Offset Overl
IntraCell AMR TCHF-TCHH Ho Qual. Thr
IntraCell TCHF-TCHH Ho Stat Time(s)
IntraCell TCHF-TCHH Ho Last Time(s)
IntraCell AMR TCHHTCHF Traffic Threshold
IntraCell AMR TCHHTCHF Qaul Ho Allowed
IntraCell TCHH-TCHF Ho Duration(s)
IntraCell AMR TCHH-TCHF Ho ATCB Thr
IntraCell TCHH-TCHF ATCB Offset Overl
IntraCell AMR TCHH-TCHF Ho Pathloss
IntraCell TCHH-TCHF Pathloss Offset Ov
IntraCell AMR TCHH-TCHF Ho Qual. Thr
IntraCell TCHH-TCHF Ho Stat Time(s)
IntraCell TCHH-TCHF Ho Last Time(s)
IntraCell Non-AMR TCHFTCHH Ho Allowed
IntraCell Non-AMR TCHFTCHH Traffic Threshold
IntraCell Non-AMR TCHF-TCHH Ho Pathl
IntraCell Non-AMR TCHF-TCHH Ho ATCB
IntraCell Non-AMR TCHF-TCHH Ho Pathl
IntraCell Non-AMR TCHF-TCHH Ho ATCB
IntraCell Non-AMR TCHF-TCHH Ho Qual.
IntraCell Non-AMR TCHHTCHF Traffic Threshold
IntraCell Non-AMR TCHHTCHF Qaul. Ho Allowed
IntraCell Non-AMR TCHH-TCHF Ho ATCB
IntraCell Non-AMR TCHH-TCHF Ho Pathl
IntraCell Non-AMR TCHH-TCHF Ho Qual.
Pathloss Ho. Enable
Down Power Superabundant Watch Time
Down Power Superabundant Valid Time(
Max Resend Times of Phy.Info.
T3105(10ms)

1
1
No
75
5
1
1
2
100
10
20
20
0
3
2
15
No
5
4
20
108
10
3
3
2
No
85
1
2
95
30
0
25
No
14
103
2
OFF
5
3
30
7

Yes

Yes

Yes

OFF

V9R8C12

Default Value

Cell Index
Cell Name
Site Index
Site Name
Idle SDCCH Threshold N1
2
Cell SDCCH Channel Maximum
80
TCH Minimum Recovery Time(s)
60
TCH Traffic Busy Threshold(%)
60
Interf. Priority Allowed
Yes
Active CH Interf. Meas.Allowed
Yes
Allocation TRX Priority Allowed
Yes
History Record Priority Allowed
Yes
Balance Traffic Allowed
Yes
Interf.of UL Level Threshold
30
Interf.of UL Qual. Threshold
40
Interf.of DL Level Threshold
35
Interf.of DL Qual.Threshold
40
Filter Length for TCH Qual.
6
Filter Length for SDCCH Level
2
AMR TCH/H Prior Cell Load Threshold
55
Access Grade Allowed
No
Highest Priority
1
Fix Abis Prior Choose Abis Load Threshold(%)
80
Flex MAIO Switch
Close
Flex HSN Switch
Close
Channel Allocate Strategy
Capability Preferred
Dynamic Transmission Diversity(PBT) Supported
Not Support
Threshold of the difference between uplink received levels
100
Smooth factor of uplink received level
6
Duration of uplink received level difference
4
Observed time of uplink received level difference
5
Multi-Density Trx Power Sharing
Dynamic Power Sharing
Channel Assignment Allowed for Insufficient Power
Yes
Highest Priority User Quality First
No
Quality First Highest Priority
1
Ratio of TCHH(%)
100
Ratio of AMR-HR(%)
100
Max Channel Num Reserved for EC
0
Different band SDCCH using optimize
No
Power Priority Allowed
No
Factory Mode
OFF
Level Thresh. for Assigning Main BCCH Carrier Channel Under TIGHT BCCH
30
Quality Thresh. for Assigning Main BCCH Carrier Channel Under TIGHT BCCH
1
Offset of the difference between uplink received levels(dBm)
10
WAMR FR Soft Block Threshold
5
WAMR HR Soft Block Trheshold
11
Downlink Path Loss Offset
7
Non-AMR User Allocate Loose Frequency Reuse Mode Trx Preference
No
C/I Estimate Value(dB)
22
Low Rxlev Overlayer Forbid Allocation Switch
Open

Proposal Value

30
40
40

Capability Preferred

None
No

0
No

22

Remark

V9R8C12
Cell Index
Cell Name
Site Index
Site Name
Data service Allowed
SMCBC DRX
Cell Direct Try Forbidden Threshold
Interf. Band Threshold 0 (-dBm)
Interf. Band Threshold 1 (-dBm)
Interf. Band Threshold 2 (-dBm)
Interf. Band Threshold 3 (-dBm)
Interf. Band Threshold 4 (-dBm)
Interf. Band Threshold 5 (-dBm)
Interf.Calculation Period(SACCH period(480ms))
Radio Resource Report Period(s)
CCCH Load Indication Period(s)
CCCH Load Threshold
Overload Indication Period
Average RACH Load Timeslot Number
Max RC Power Reduction(2dB)
Frame Start Time
DC Bias Voltage Threshold
Diversity LNA Bypass Permitted
Power Output Error Threshold
Power Output Reduction Threshold
VSWR TRX Unadjusted Threshold
VSWR TRX Error Threshold
Frame Offset
Antenna Azimuth Angle(Degree)
Included Angle(Degree)
Voice quality report switch
Power boost before HO enabled or not
Frequency Adjust Switch
Frequency Adjust Value
Reserved TCH Number for PA Turning On
Activation Factor
Diversity Transmitter GMSK Delay(1/8bit)
Diversity Transmitter 8PSK Delay(1/8bit)
Abis Flow Control Permitted
Power Control Allowed
MS_TXPWR_MAX_CCH
Support Half Rate
Aiding Delay Protect Time(min)
Directly Magnifier Site Flag
Call Drop Optimization Error Indication (T200 Timeout)
Call Drop Optimization Error Indication (Unsolicited DM Response)
Call Drop Optimization Error Indication (Sequence Error)
Call Drop Optimization Connection Failure (Radio Link Failure)
Call Drop Optimization Connection Failure (HO Access Failure)
Call Drop Optimization Connection Failure (OM Intervention)
Call Drop Optimization Connection Failure (Radio Resource Unavailable)
Call Drop Optimization Connection Failure (Other Causes)
Call Drop Optimization Release Indication
Call Drop Optimization ABIS Territorial Link Failure
Call Drop Optimization Equipment Failure
Call Drop Optimization Forced Handover Failure
Call Drop Optimization No MR For a Long Time
Call Drop Optimization Resource Check

Default Value

0001110110
Yes
90
110
105
98
92
87
85
20
10
15
80
15
5000
5
65535
3
Invalid
2
2
2
2
0
360
360
Not Report
StartUp
NO
36671
2
5
16
8
Yes
Yes
0
No
15
No
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Call Drop Optimization In-BSC Handover Timeout


1
Call Drop Optimization Out-Bsc Handover Timeout
1
Call Drop Optimization Intra-Bsc Out-Cell Handover Timeout
1
Call Drop Optimization Intra-Cell Handover Timeout
1
Cell Software Parameter 1
1
Cell Software Parameter 2
1
Cell Software Parameter 3
1
Cell Software Parameter 4
1
Cell Software Parameter 5
1
Cell Software Parameter 6
100
Cell Software Parameter 7
100
Cell Software Parameter 8
100
Cell Software Parameter 9
100
Cell Software Parameter 10
100
Cell Software Parameter 11
100
Frequency Scan Result Type
Maximum/Mean Value
IntraCellHo to Ass SWITCH
No
Force MS to Send Ho Access SWITCH
Yes
Sublink resources preemption switch
No
Lower-level sublink resources preemption switch
No
Cell Out-of-Service Alarm Switch
Yes
Interfere Band Stat Algorithm Type
Interference Band Measurement Algorithm II
Paging Messages Optimize at Abis Interface
Forced Turn-on
Interval For Sending Paging Optimizing Msgs
2
Paging Numbers of one Optimizing Msgs
5
Average Paging Message Number 0f Cell In Period
180
MAX Paging Message Number 0f Cell In Period
220
Qtru Signal Merge Switch
No
Cell EFR Forced Switch
No
MS Capability Statistic Switch
OFF
ICB Allowed
No
Voltage Adjust Based Timeslots Allowed
No
SD Fast Ho
No
STIRC Allowed
No
Base Hop Support Close TRX Allowed
No
Enquire Classmark After In-BSC Handover Enable
Disable
Send Classmark Enquiring Result To MSC Enable
Disable
TCH Time Handover Switch
No
TCH Time Handover Period(s)
60
Flex TSC Switch
No
Dummy Bit Randomization Switch
No
Stop Transimit System Information 5/5bis/5ter Switch
No
Activate L2 Re-establishment
Disable
Bad Quality Disconnection Threshold
55
Timer for Bad Quality Disconnection Statistic(s)
3
Report Downlink VQI Allowed
No
Main BCCH Trx Non-Bcch Time Slot Power Derating Enable
No
Main BCCH Trx Non-Bcch Time Slot Power Derating Start Time
00:00
Main BCCH Trx Non-Bcch Time Slot Power Derating End Time
00:00
Main BCCH Trx Non-Bcch Time Slot Power Derating Range
0
Main BCCH Trx Non-Bcch Time Slot Power Derating Active Channel Enable
No
FER Report Enable
No
PDCH Power Saving Enable
No
Switch for BTS Supporting SAIC Power Control Adjustment
Yes
Cell Weak Coverage Downlink RxLev Threshold
20
Cell Weak Coverage TA Threshold
1
Cell Over Coverage Downlink RxLev Threshold
30
Cell Over Coverage TA Threshold
1
TSC Plan Enable
No
Frequency Hoping Coding Scheme
CA+MA Mode

MAX TA Drop Call Switch


MAX TA Drop Call Filter(0.5s)
MAX TA Drop Call Threshold(bit)
T3101(ms)
ImmAss A Interf Creation Timer(ms)
T3103A(ms)
T7(ms)
T3107(ms)
T3121(ms)
T8(ms)
T3109(ms)
T3111(ms)
TREESTABLISH(ms)
T3122(s)
T3103C(ms)
WaitforRelIndAMRFR
WaitforRelIndAMRHR
Timer for UL Data Forward(ms)
T11(s)
Tqho(s)
Channel Reserved for EC Protect Timer(s)
Timer For SD Fast Ho trig(s)

Close
20
255
3000
5000
10000
10000
10000
10000
10000
27000
1000
15000
10
10000
34000
26000
10
8
8
15
2

Proposal Value

100

No

Remark

Yes

Yes

V9R8C12
Cell Index
Cell Name
Site Index
Site Name
Network Operation Mode
T3168
T3192
Max. Duration of DRX(s)
Access Burst Type
Control Acknowledge Type
BS_CV_MAX
Pan Decrement
Pan Increment
Pan Max.
Network Control Mode
Support SPLIT_PG_CYCLE on CCCH
Packet Access Priority
Routing Area Color Code
Support 11BIT EGPRS Access
BSS Paging Coordination
Extended Cell Throughput Enhancement
Allow Cell Reselection from GSM to TD in Packet Transfer Mode

Default Value

Network Operation Mode II


500ms
500ms
4
8bit
Four access pulses by default
10
1
2
20
nc0
No
Packet access of levels 1-4
1
Yes
Yes
Open
Yes

Proposal Value

No

Open
No

Remark

V9R8C12
Cell Index
Cell Name
Site Index
Site Name
Uplink Fixed CS Type
Uplink Default CS Type
Up TBF Threshold from CS1 to CS2
Up TBF Threshold from CS2 to CS3
Up TBF Threshold from CS3 to CS4
Up TBF Threshold from CS2 to CS1
Up TBF Threshold from CS3 to CS2
Up TBF Threshold from CS4 to CS3
Downlink Fixed CS Type
Downlink Default CS Type
Downlink TBF Threshold from CS1 to CS2
Downlink TBF Threshold from CS2 to CS3
Downlink TBF Threshold from CS3 to CS4
Downlink TBF Threshold from CS2 to CS1
Downlink TBF Threshold from CS3 to CS2
Downlink TBF Threshold from CS4 to CS3
Link Quality Control Mode
BEP Period
Uplink Fixed MCS Type
Uplink Default MCS Type
Downlink Fixed MCS Type
Downlink Default MCS Type

Default Value Proposal Value

UNFIXED
CS1
5
2
2
10
5
5
UNFIXED
CS2
5
2
2
10
5
5
IR
5
UNFIXED
MCS2
UNFIXED
MCS6

Remark

V9R8C12

Default Value

Proposal Value

Cell Index
Cell Name
Site Index
Site Name
Maximum Ratio Threshold of PDCHs in a Cell(%)
30
Uplink Multiplex Threshold of Dynamic Channel Conversi
20
Downlink Multiplex Threshold of Dynamic Channel Conve
20
PDCH Uplink Multiplex Threshold
70
PDCH Downlink Multiplex Threshold
80
Dynamic Channel Conversion Parameter of Concentric Ce Only convert at UL
Timer of Releasing Idle Dynamic Channel
20
Level of Preempting Dynamic Channel
Preempt all dynamic TCHFs
Reservation Threshold of Dynamic Channel Conversion
2
Timer of Releasing Abis Timeslot
15
THP1-ARP1 Priority Weight
10
THP1-ARP2 Priority Weight
6
THP1-ARP3 Priority Weight
4
THP2-ARP1 Priority Weight
8
THP2-ARP2 Priority Weight
4
THP2-ARP3 Priority Weight
3
THP3-ARP1 Priority Weight
6
THP3-ARP2 Priority Weight
3
THP3-ARP3 Priority Weight
2
Background-ARP1 Priority Weight
4
Background-ARP2 Priority Weight
2
Background-ARP3 Priority Weight
1
BestEffort-ARP1 Priority Weight
8
BestEffort-ARP2 Priority Weight
4
BestEffort-ARP3 Priority Weight
2
PDCH reforming
No

Remark

V9R8C12
Cell Index
Cell Name
Site Index
Site Name
Release Delay of Non-extended Uplink TBF(ms)
Inactive Period of Extended Uplink TBF(ms)
Release Delay of Downlink TBF(ms)
Maximum Value of N3101
Maximum Value of N3103
Maximum Value of N3105

Default Value Proposal Value Remark

120
2000
2400
20
3
10

V9R8C12
Cell Index
Cell Name
Site Index
Site Name
Alpha Parameter
Initial Power Level
Signal Strength Filter Period in Idle Mode
Signal Strength Filter Period in Transfer Mode
BTS Power Attenuation on PBCCH
Measured Receive Power Level Channel
Broadcast PSI4
Constant of Filtering the Collision Signal Strength for Power Control

Default Value Proposal Value Remark

0.6
12
10
10
-2dB
PDCH
No
2

V9R8C12

Default Value

Cell Index
Cell Name
Site Index
Site Name
Support Gbr QoS
Not Support
Move Immediate Assignment Down to Not Support
Move Packet Assignment Down to BTS Not Support
Min. GBR for POC Service
6
Max. GBR for POC Service
16
Transmission Delay of POC Service
650
PS Concentric Cell HO Strategy
No handover between underlaid subcell and overlaid subcell
Support QoS Optimization
Not Support
Min Access Level Threshold
15
Cell Reselection Hysterisis
6
Cell Penalty Level
30
Cell Penalty Last Time(s)
10
MS Rx Quality Statistic Threshold
200
MS Rx Quality Worsen Ratio Threshold 30
Load Reselection Start Threshold(%) 85
Load Reselection Receive Threshold(% 60
Allowed Measure Report Missed Numbe4
Filter Window Size
6
2G/3G Cell Reselection Strategy
Preference for 2G Cell
Cell Urgent Reselection Allowed
Permit
Cell Load Reselection Allowed
Permit
Cell Normal Reselection Allowed
Permit
Normal Cell Reselection Watch Period 10
Normal Cell Reselection Worsen Level 1
Cell Reselect Interval(s)
2
EDGE GMSK Quality Threshold
7
EDGE 8PSK Quality Threshold
16
GPRS Quality Threshold
5
Load Reselect Level Threshold
40
Support Frame/Block Number SynchroniNo

Proposal Value

Remark

You might also like