Scribd
Upload
14 views

Simulation

The document describes the timing of sampling two analog to digital converters (ADC1 and ADC2) with a resolution of 8 bits each. Each ADC sampling takes 3 cycles, with a required delay of 6 cycles between sampling each ADC. The conversion phase to generate the digital output takes 8 cycles. The timing diagram shows the sampling of each ADC alternating with the required delay between, along with the converted digital data output.

Uploaded by

M Faizan Farooq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
14 views

Simulation

The document describes the timing of sampling two analog to digital converters (ADC1 and ADC2) with a resolution of 8 bits each. Each ADC sampling takes 3 cycles, with a required delay of 6 cycles between sampling each ADC. The conversion phase to generate the digital output takes 8 cycles. The timing diagram shows the sampling of each ADC alternating with the required delay between, along with the converted digital data output.

Uploaded by

M Faizan Farooq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

ADC1

ADC2
CH12data A A A A A A
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3
Legend
Idle Time (due to delay : 6cycles must separate sampling ADC1 and Sampling ADC2)
Sampling time : 3 cycles
Delay between sampling of 2 ADC : 6 cycles
Convertion phase : 8 cycles (resolution=8bit ==> Conversion time = 8 cycles)
A Converted data availble
A A A
4 5 6 1 2 3 4 5 6 1 2 3 4 5 6
Idle Time (due to delay : 6cycles must separate sampling ADC1 and Sampling ADC2)

You might also like