Q45VR3 Series Sensors

Universal voltage photoelectric sensors with electromechanical relay output

Q45VR3 Series Features

• Advanced one-piece photoelectric sensors with outstanding optical perform-
ance and extremely rugged design
• Universal supply voltage: 12 to 250V dc or 24 to 250V ac
• Electromechanical relay for economical, high-capacity switching and immunity
to electrical noise
• Full line includes opposed, diffuse, retroreflective, convergent, and glass and
plastic fiber optic sensing modes
• Switchable light/dark operate
• Versatile plug-in modules available for output timing logic and/or signal
strength display
• Highly visible Power, Signal (AID™ System), and Output indicator LEDs
• Choice of prewired 2 m (6.5') or 9 m (30') unterminated cable or Mini-style
quick-disconnect fitting
• Versatile mounting options
• Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67
rating

Because of their extremely high excess gain, these opposed-mode sensors are an
excellent option for sensing in contaminated or dirty areas, and are also the best
choice for long-range sensing. Infrared, 880 nm

Q45VR3 Series Opposed-Mode Emitter (E) and Receiver (R) Models

Supply Output
Models Range Cable* Excess Gain Beam Pattern
Voltage Type
Effective Beam: 13 mm
Q453E Emitter 2-wire
2m (6.5') 1000

E Q45E/R Q45E/R
1.5 m 60 in
Q45VR3R Receiver 5-wire X Opposed Mode Opposed Mode
C 1.0 m 40 in
2m (6.5') Universal SPDT E 100
0.5 m 20 in
S
60 m 12 - 250V dc Electro- S
0 0

0.5 m 20 in
(200') or mechanical G 10 1.0 m 40 in
24 - 250V ac Relay A
Q453EQ Emitter 3-Pin Mini- I
1.5 m 60 in

style QD N
0 12 m 24 m 36 m 48 m 60 m
1 40 ft 80 ft 120 ft 160 ft 200 ft
0.1 m 1.0 m 10 m 100 m
0.33 ft 3.3 ft 33 ft 330 ft
DISTANCE
Q45VR3RQ Receiver 5-Pin Mini- DISTANCE
style QD

* 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q453E W/30)
A model with a QD connector requires a mating cable; see page 10.

IMPORTANT: SEE SAFETY USE WARNING ON BACK PAGE

Printed in USA 04/01 P/N 53997 rev. B
Q45VR3 Series

The visible red sensing beam of these sensors makes them very easy to align.
Model Q45VR3LP polarizes the emitted light and filters out unwanted reflections,
making sensing possible in applications otherwise considered unsuited to
retroreflective sensing performance. Specified using the model BRT-3 3" reflector P
(see the Accessories section of your current Banner Photoelectric Sensors catalog
for further information). Visible red, 680 nm
Non-Polarized Polarized

Q45VR3 Series Retroreflective-Mode Models

Supply Output
Models Range Cable* Voltage Type Excess Gain Beam Pattern

Non-Polarized
1000
Q45LV
E
X
C Retroreflective Mode
Q45LV
75 mm 3.0 in
100 Retroreflective Mode
E
Q45VR3LV 5-wire S 50 mm 2.0 in

Universal SPDT S 25 mm 1.0 in

2 m (6.5')
0.08 to 9 m 12 - 250V dc Electro- G 10
0 With BRT-3 Reflector 0
25 mm 1.0 in
(3" to 30') or mechanical A
Q45VR3LVQ 5-Pin I 50 mm 2.0 in

24 - 250V ac Relay N With BRT-3 Reflector 75 mm 3.0 in

Mini-style QD 1
.01 m .10 m 1.0 m 10 m 0 3m 6m 9m 12 m 15 m
.033 ft .33 ft 3.3 ft 33 ft 10 ft 20 ft 30 ft 40 ft 50 ft
DISTANCE DISTANCE

Polarized
1000
Q45LP
E
X
C Retroreflective Mode 75 mm
Q45LP 3.0 in
100 Retroreflective
E Mode
50 mm 2.0 in
Q45VR3LP 5-wire S
Universal SPDT S 25 mm 1.0 in

2 m (6.5') 0 With BRT-3 Reflector 0

0.15 to 6 m 12 - 250V dc Electro- G 10 With BRT-3 Reflector 25 mm 1.0 in
A
(6" to 20') or mechanical I 50 mm 2.0 in
Q45VR3LPQ 5-Pin N
24 - 250V ac Relay 75 mm 3.0 in

Mini-style QD 1
0 1.5 m 3m 4.5 m 6m 7.5 m
.01 m .10 m 1.0 m 10 m
.033 ft .33 ft 3.3 ft 33 ft 5 ft 10 ft 15 ft 20 ft 25 ft

DISTANCE DISTANCE

* 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45VR3LV W/30)
A model with a QD connector requires a mating cable; see page 10.

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 2
 Q45VR3 Series
These diffuse-mode models detect objects by sensing the reflection of their own emitted light.
Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a
large percentage of emitted light back to the sensor. Model Q45VR3DX is the first choice for dif-
Infrared, 880 nm fuse-mode applications when there are no background objects to falsely return light.

Q45VR3 Series Diffuse-Mode Models

Supply Output Excess Gain Beam Pattern
Models Range Cable* Voltage Type
Performance based on 90% reflectance white test card

Short Range
1000
Q45D
E
X 15 mm 0.6 in
Diffuse Mode
C 10 mm
Q45D 0.4 in
100 Diffuse Mode
E 5 mm 0.2 in
S
Q45VR3D 5-wire S 0 0
Universal SPDT
2 m (6.5') 5 mm 0.2 in
45 cm 12 - 250V dc Electro- G
A
10
10 mm 0.4 in

(18") or mechanical I 15 mm 0.6 in

Q45VR3DQ 5-Pin N
24 - 250V ac Relay 0 100 mm 200mm 300 mm 400 mm 500 mm
Mini-style QD 1
1.0 mm 10 mm 100 mm 1000 mm
4.0 in 8.0 in 12.0 in 16.0 in 20.0 in

0.04 in 0.4 in 4.0 in 40 in DISTANCE

DISTANCE

Long Range
1000
Q45DL
E Q45DL
Diffuse Mode
X 75 mm 3.0 in
C Diffuse Mode 50 mm 2.0 in
100
E
25 mm 1.0 in
S
Q45VR3DL 5-wire S 0 0
Universal SPDT
2 m (6.5') G 10
25 mm 1.0 in

1. 8 m 12 - 250V dc Electro- A
50 mm 2.0 in

(6') or mechanical I 75 mm 3.0 in

Q45VR3DLQ 5-Pin N
24 - 250V ac Relay 1 0 0.6 m 1.2 m 1.8 m 2.4 m 3.0 m
Mini-style QD .01 m .10 m 1.0 m 10 m
2 ft 4 ft 6 ft 8 ft 10 ft

.033 ft .33 ft 3.3 ft 33 ft DISTANCE

DISTANCE

High Power
1000
Q45DX
E
X Q45DX
Diffuse Mode 75 mm 3.0 in
C Diffuse Mode
100
E 50 mm 2.0 in
Q45VR3DX 5-wire S 25 mm 1.0 in
Universal SPDT S
2 m (6.5') 0 0
3m 12 - 250V dc Electro- G 10 25 mm 1.0 in

(10') or mechanical A 50 mm 2.0 in

Q45VR3DXQ 5-Pin I
24 - 250V ac Relay N
75 mm 3.0 in

Mini-style QD 1 0 0.6 m 1.2 m 1.8 m 2.4 m 3.0 m

0.01 m 0.1 m 1.0 m 10 m 2 ft 4 ft 6 ft 8 ft 10 ft
0.033 ft 0.33 ft 3.3 ft 33 ft
DISTANCE
DISTANCE

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 3
Q45VR3 Series

These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately
sense the position of parts approaching from the side. Will ignore all but highly reflective objects
that are outside the sensing range.
Visible red, 680 nm

Q45VR3 Series Convergent-Mode Models

Supply Output Excess Gain Beam Pattern
Models Focus Cable* Voltage Type
Performance based on 90% reflectance white test card
1000
Q45CV
E
38 mm X Convergent Mode 3.8 mm
Q45CV 0.15 in
C
Q45VR3CV (1.5") 5-wire E 100 2.5 mm
Convergent Mode
0.10 in
Universal SPDT
2 m (6.5') S 1.2 mm 0.05 in

Spot Size 12 - 250V dc Electro- S 0 0

at Focus: or mechanical G 10 1.2 mm 0.05 in

Q45VR3CVQ 5-Pin A 2.5 mm 0.10 in
1.3 mm 24 - 250V ac Relay I
Mini-style QD N
3.8 mm 0.15 in

(0.05") 1 0 38 mm 75 mm 113 mm 150 mm 190 mm

1 mm 10 mm 100 mm 1000 mm 1.5 in 3.0 in 4.5 in 6.0 in 7.5 in
.04 in .4 in 4 in 40 in
DISTANCE
DISTANCE

1000
Q45CV4
E
X
100 mm C
Convergent Mode
3.8 mm
Q45CV4 0.15 in
Q45VR3CV4 (4") 5-wire E 100 Convergent Mode
Universal SPDT S
2.5 mm 0.10 in
2 m (6.5') 1.2 mm 0.05 in
Spot Size 12 - 250V dc Electro- S
0 0

at Focus: or mechanical G 10
1.2 mm 0.05 in
Q45VR3CV4Q 5-Pin A
1.5 mm 24 - 250V ac Relay I
2.5 mm 0.10 in
Mini-style QD N 3.8 mm 0.15 in
(0.06") 1
1 mm 10 mm 100 mm 1000 mm 0 38 mm 75 mm 113 mm 150 mm 190 mm
.04 in .4 in 4 in 40 in 1.5 in 3.0 in 4.5 in 6.0 in 7.5 in

DISTANCE DISTANCE

* 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45VR3CV W/30)
A model with a QD connector requires a mating cable; see page 10.

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 4
 Q45VR3 Series
These models are an excellent choice for glass fiber optic applications where
faster sensor response is not important. Their high excess gain means that
opposed individual fibers can operate reliably in many very hostile environments.
Also, special miniature bifurcated fiber optic assemblies with bundle sizes as
small as 0.5 mm (.020") dia. may be used successfully for diffuse-mode sensing
when using sensor model Q45VR3F(Q). For more information on compatible
Infrared, 880 nm and Visible Red, 650 nm glass fiber optics, refer to your current Banner Photoelectric Sensors catalog.

Q45VR3 Series Glass Fiber-Optic Models

Supply Output Excess Gain Beam Pattern
Models Range Cable* Voltage Type
Diffuse mode performance based on 90% reflectance white test card

Infrared, 880 nm 1000

Q45F
E 150 mm
Q45F 6.0 in
X Opposed Mode Opposed Mode
C 100 mm 4.0 in
100 IT23S Fibers
E 50 mm 2.0 in
S 0 0
IT13S Fibers
S IT23S fibers
50 mm 2.0 in
G 10 100 mm 4.0 in
A IT13S fibers
150 mm 6.0 in
I
N 0 0.4 m 0.8 m 1.2 m 1.6 m 2.0 m
1 15 in 30 in 45 in 60 in 75 in
Range 0.01 m 0.1 m 1.0 m 10 m
DISTANCE
Q45VR3F 5-wire 0.03 ft 0.33 ft 3.3 ft 33 ft
varies by Universal SPDT DISTANCE
2 m (6.5')
sensing 12 - 250V dc Electro- 1000
mode and or mechanical E
Q45F
Q45VR3FQ 5-Pin Q45F
BP Q45F opp.eps
fiber optics 24 - 250V ac Relay X Diffuse Mode
3.8 mm
Diffuse Mode
0.15 in

Mini-style QD C 2.5 mm 0.10 in

used E 100
1.3 mm
BT13S Fiber
0.05 in
S
S 0 BT23S Fiber 0
BT23S Fiber
1.3 mm 0.05 in
G 10
2.5 mm 0.10 in
A
I 3.8 mm 0.15 in
BT13S Fiber
N
0 25 mm 50 mm 75 mm 100 mm 125 mm
1
1 in 2 in 3 in 4 in 5 in
1 mm 10 mm 100 mm 1000 mm
0.04 in 0.4 in 4.0 in 40 in DISTANCE
DISTANCE

Visible Red, 650 nm 1000

Q45FV Q45FV
E 30 mm 1.2 in
Opposed Mode
X Opposed Mode 20 mm 0.8 in
C IT23S Fibers
100
E 10 mm 0.4 in
S 0 0
S IT23S fibers
10 mm IT13S Fibers 0.4 in
G 10 20 mm 0.8 in
A IT13S fibers
30 mm 1.2 in
I
N
0 100 mm 150 mm 200 mm 250 mm 300 mm
1 4 in 6 in 8 in 10 in 12 in
Range 1.0 mm 10 mm 100 mm 1000 mm
DISTANCE
Q45VR3FV 5-wire 0.04 in 0.4 in 4 in 40 in
varies by Universal SPDT DISTANCE
2 m (6.5')
sensing 12 - 250V dc Electro- 1000
mode and or mechanical E
Q45FV
Q45VR3FVQ 5-Pin X 3.0 mm
Q45FV 0.12 in
fiber optics 24 - 250V ac Relay Diffuse Mode Diffuse Mode
Mini-style QD C
100
2.0 mm 0.08 in
used E
S
1.0 mm 0.04 in

S 0 BT13S Fiber 0
1.0 mm 0.04 in
G 10
2.0 mm BT23S Fiber 0.08 in
A BT13S
I Fiber BT23S Fiber 3.0 mm 0.12 in
N
1 0 5 mm 10 mm 15 mm 20 mm 25 mm
1 mm 10 mm 100 mm 1000 mm 0.2 in 0.4 in 0.6 in 0.8 in 1.0 in
0.04 in 0.4 in 4.0 in 40 in
DISTANCE
DISTANCE

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 5
Q45VR3 Series
Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situ-
ations where environmental conditions allow (for example, low levels of acids,
alkalis, and solvents). Most are easily cut to length in the field, and are available
in a variety of sensing end styles. For more information on compatible plastic
fiber optics, refer to your current Banner Photoelectric Sensors catalog.
Visible red, 660 nm

Q45VR3 Series Plastic Fiber-Optic Models

Supply Output Excess Gain Beam Pattern
Models Range Cable* Voltage Type Diffuse mode performance based on 90% reflectance white test card
1000
Q45FP
E 45 mm Q45FP 1.8 in
X Opposed Mode Opposed Mode
30 mm PIT46U Fibers 1.2 in
C
100
E 15 mm 0.6 in
S 0 0
S PIT26U Fibers
15 mm 0.6 in
PIT46U Fibers
G 10 30 mm 1.2 in
A 45 mm 1.8 in
I PIT26U Fibers
Range N 0 25 mm 50 mm 75 mm 100 mm 125 mm
Q45VR3FP 5-wire 1 1.0 in 2.0 in 3.0 in 4.0 in 5.0 in
varies by Universal SPDT 1 mm 10 mm 100 mm 1000 mm DISTANCE
2 m (6.5') 0.04 in 0.4 in 4.0 in 40 in
sensing 12 - 250V dc Electro- DISTANCE
mode and or mechanical
Q45VR3FPQ 5-Pin 1000
fiber optics 24 - 250V ac Relay Q45FP
Mini-style QD E
18 mm Q45FP 0.75 in
used X Diffuse Mode Diffuse Mode
C 12 mm 0.50 in
100
E PBT46U Fiber 6 mm PBT46U Fiber 0.25 in
S 0 0
S
6 mm 0.25 in
G 10 12 mm 0.50 in
A 18 mm 0.75 in
I
N PBT26U Fiber 0 10 mm 20 mm 30 mm 40 mm 50 mm
1 0.4 in 0.8 in 1.2 in 1.6 in 2.0 in
0.1 mm 1 mm 10 mm 100 mm
0.004 in 0.04 in 0.4 in 4 in
DISTANCE

* 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45VR3FP W/30)
A model with a QD connector requires a mating cable; see page 10.

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 6
 Q45VR3 Series

Q45VR3 Series Specifications

Supply Voltage and Current Universal voltage: 24 to 250V ac, 50/60 Hz or 12 to 250V dc (1.5 watts maximum)
Supply Protection Circuitry Protected against transient voltages. DC hookup is without regard to polarity.
Output Configuration SPDT (Single-Pole, Double-Throw) electromechanical relay output. All models except emitters.

Output Rating Max. switching power (resistive load): 1250VA, 150W

Max. switching voltage (resistive load): 250V ac, 125V dc
Max. switching current (resistive load): 5A @ 250V ac, 5A @ 30V dc derated to 200 mA @ 125V dc
Min. voltage and current: 5V dc, 10mA
Mechanical life of relay: 50,000,000 operations
Electrical life of relay at full resistive load: 100,000 operations
Output Protection Circuitry Protected against false pulse on power-up
Output Response Time 15 milliseconds ON and OFF
(NOTE: 100 millisecond delay on power-up. Relay is de-energized during this time.)

Repeatability Opposed mode: 0.25 milliseconds

All other sensing modes: 0.5 milliseconds
Response time and repeatability specifications are independent of signal strength.

Adjustments Light/Dark Operate select switch; and multi-turn Sensitivity control on top of sensor beneath a transparent
o-ring-sealed Lexan® cover, allows precise sensitivity setting (turn clockwise to increase gain). Optional logic
and logic/display modules have adjustable timing functions (see page 10).
Indicators Indicator LEDs are clearly visible beneath a raised transparent Lexan® dome on top of the sensor.
Power (green) LED lights whenever 24 to 250V ac, or 12 to 250V dc power is applied
Signal (red) AID™ System LED lights whenever the sensor sees its modulated light source, and pulses at a
rate proportional to the strength of the received light signal
Load (yellow) LED lights whenever the output relay is energized
Optional 7-element LED signal strength display module
Construction Molded reinforced thermoplastic polyester housing, o-ring-sealed transparent Lexan® cover, molded acrylic
lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psi washdown. The base of
cabled models has a 1/2" NPS integral internal conduit thread.
Environmental Rating NEMA 6P, IEC IP67

Connections PVC-jacketed 2 m (6.5') or 9 m (30') unterminated cables, or Mini-style quick-disconnect (QD) fittings are
available (“Q”- suffix models). QD cables are ordered separately. See page 10.
Operating Conditions Temperature: -25° to +55° C (-13° to +131°F)
Maximum relative humidity: 90% at 50°C (non-condensing)

Application Notes Transient suppression is recommended for contacts switching inductive loads.
Optional output timing modules are available. See page 10 for more information.

Certifications

Lexan® is a registered trademark of General Electric Co.

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 7
Q45VR3 Series

Q45VR3 Series Dimensions

Q45VR3 Series Sensors – Opposed, Retro, and Diffuse Sensing Modes
(model suffix E, R, D, DL, DX, LP & LV)
Cabled Quick-Disconnect
54.1 mm* *57.9 mm (2.28") for LP models
(2.13")

44.5 mm
(1.75") Lens Centerline

50.8 mm
(2.00")
69.0 mm
(2.72")
87.6 mm
6.4 mm (0.25") (3.45")
87.6 mm
(3.45") 4.5 mm (#10) Screw
Clearance (2)
7.1 mm
(0.28")
30.0 mm
(1.18")
Internal Thread External Thread
(1/2–14NPSM) ø 6.1 (0.24") M30 X 1.5
2m (6.5') Cable
14 mm (0.6")
External Thread Mini-style QD Connector
M30 X 1.5 Mounting Nut is Supplied

Convergent Sensing Mode Glass Fiber Optic Plastic Fiber Optic

(model suffix CV & CV4) (model suffix F and FV) (model suffix FP)

59.8 mm
61.7 mm 60.5 mm (2.35")
(2.43") (2.38")

Lens
Centerline
50.8 mm
(2.00")

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 8
 Q45VR3 Series

Q45VR3 Series Indicators and Controls

Status indicator LEDs for Power, Signal and Output are clearly visible
beneath a raised dome in the sensor’s transparent o-ring-sealed Lexan®
cover. The Power indicator lights whenever power is applied to the sensor.
The Signal LED lights whenever the sensor sees its modulated light
source, and pulses at a rate proportional to the strength of the received
light signal; this is the AID™ Alignment Indicating Device*. The Output
indicator lights whenever the sensor’s output relay is energized. This indi-
cator is especially useful when a timing logic module is used and Signal
and Output conditions are not concurrent.

Also located beneath the sensor’s o-ring-sealed cover are controls for
light/dark operate selection and Sensitivity adjustment.

Figure 1. Indicators and controls on the Q45VR3 Series

Sensors * US patent no. 4356393

Q45VR3 Series Hookups

Q45VR3 Sensors with Attached Cable Q45VR3 Sensors with Quick-Disconnect
5-Pin Mini-Style ( model suffix Q)
bn bn
bu 24 - 250V ac or 12 - 250V dc* bu 24 - 250V ac or 12 - 250V dc*
wh NC wh NC
ye ye
C C
bk bk
NO NO

Q453E Emitters with Attached Cable Q453EQ Emitters with Quick-Disconnect

3-Pin Mini-Style

bn
bn
bu 24-250V ac or 12-250V dc*
24-250V ac or 12-250V dc*
bu
bk

*NOTE: Connection of dc power is without regard to polarity.

Quick-Disconnect (QD) Option

AC Q45VR3 Series sensors are sold with either a 2 m (6.5') or a 9 m (30') attached PVC-covered cable, or with a 3-pin Mini-
style (opposed mode emitter) or 5-pin Mini-style Quick-Disconnect (QD) cable fitting.
Mini-style QD sensors are identified by the suffix “Q” in their model number suffix. Mating cables for QD Q45VR3 sensors are
specified on page 10.

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 9
Q45VR3 Series

Accessories
Mini-Style Quick-Disconnect Cables
Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold plated contacts
Temperature: -40° to +80°C (-40 to +176°F)
Voltage Rating: 250V ac/300V dc

Style Model Length Dimensions Pin-Out (Female View)

3-Pin
MBCC-306 2 m (6.5') Black Wire
Female
MBCC-312 4 m (12')
Pin-out 61 mm max.
MBCC-330 9 m (30') 7/8-16UN-2B Brown Wire
Straight (2.4") Blue Wire

5-Pin White Wire Black Wire

MBCC-506 2 m (6.5') ø28 mm max.
Female (1.1")
MBCC-512 4 m (12')
Pin-out Brown Wire Blue Wire
MBCC-530 9 m (30')
Straight
Yellow Wire

Retroreflective Targets

Banner offers a wide selection of high-qualitity retroreflective targets. See the Accessories
section of your current Banner Photoelectric Sensors catalog for complete information.

NOTE: Polarized sensors require corner cube type retroreflective targets only. Non-polarized
sensors may use any retroreflective target.

Output Timing Logic and Signal Strength Display Modules

Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a seven-element dis-
play which gives a “finer” indication of excess gain than does the AID™ system LED that is standard on Q45 sensors. The modules listed
below may be used with all Q45VR3 sensors. See the data sheet packed with the module for more information.

Model Logic and/or Display Function

45LM58 Programmable output timing logic

45LM58D Programmable output timing logic plus signal strength display
45LMD Signal strength display only (no timing function)

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 10
 Q45VR3 Series

Mounting Brackets
Model Description Dimensions

56.0 mm
(2.20")
13 mm
(0.5")

• 30 mm split clamp, black PBT bracket 63.0 mm

SMB30C (2.48")
• Stainless steel mounting hardware included 31.5 mm
(1.24")

13.5 mm (0.53")
Nut Plate
2.5 mm
45.0 mm
(0.10") M5 x 0.8 x 80 mm
(1.77")
Screw (2)

6.4 mm 25.4 mm
(0.25") (1.00")
ø 30.15 mm
(1.187" dia.)

25.4 mm
57.0 mm (1.00")
(2.25") 34.9 mm
(1.38")

• 30 mm, 11-gauge, stainless steel bracket

7.1 mm
with curved mounting slots for versatility .28 x 90° (2 Slots) 25.4 mm ø 5.1 mm
SMB30MM and orientation (1.00") (0.20" dia.)

• Clearance for M6 (1/4") hardware ø 6.4 mm

(0.25" dia.)
57.2 mm
(2.25")

25.4 mm
(1.00")

R 25.4 mm 35.1 mm 57.2 mm

(1.00")
(1.38") (2.25")
69.9 mm
(2.75")

50.8 mm
(2.00")
12.7 mm
(0.50")
• 30 mm swivel, black PBT bracket
SMB30SC
• Stainless steel mounting hardware included
58.7 mm
(2.31")
30.0 mm
(1.18")

66.5 mm 29.0 mm
(2.62") (1.14")

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164
page 11
Q45VR3 Series

WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation
will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the
warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu
of any other warranty either expressed or implied.

WARNING . . . Not To Be Used for Personnel Protection

! Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applica-
tions. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • E-mail: [email protected]