Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Torque Using in Installation For HSB

    Uploaded by

    Keith Cubero
    The document provides a table with information on torque values used for the installation of high strength bolts of various sizes. It lists bolt sizes in inches, pitch of threads per inch, lead angle at basic pitch diameter, tensile stress area, preload force, and recommended installation torques in both foot-pounds and Newton-meters. The table provides torque values for bolt sizes ranging from 0.073 inches to 4 inches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Torque Using in Installation For HSB

    Uploaded by

    Keith Cubero
    41 views1 page
    The document provides a table with information on torque values used for the installation of high strength bolts of various sizes. It lists bolt sizes in inches, pitch of threads per inch, lead angle at basic pitch diameter, tensile stress area, preload force, and recommended installation torques in both foot-pounds and Newton-meters. The table provides torque values for bolt sizes ranging from 0.073 inches to 4 inches.

    Original Title

    Torque using in installation for HSB

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a table with information on torque values used for the installation of high strength bolts of various sizes. It lists bolt sizes in inches, pitch of threads per inch, lead angle at basic pitch diameter, tensile stress area, preload force, and recommended installation torques in both foot-pounds and Newton-meters. The table provides torque values for bolt sizes ranging from 0.073 inches to 4 inches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views1 page

    Torque Using in Installation For HSB

    Uploaded by

    Keith Cubero
    The document provides a table with information on torque values used for the installation of high strength bolts of various sizes. It lists bolt sizes in inches, pitch of threads per inch, lead angle at basic pitch diameter, tensile stress area, preload force, and recommended installation torques in both foot-pounds and Newton-meters. The table provides torque values for bolt sizes ranging from 0.073 inches to 4 inches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    _- -r· .

    cvfl �
    -) g {ftf "f f=-1,,fC,AA
    V

    ,..3,2.->r fr1f- 12.0- 0757)


    :n / a c.rr a,:ro
    ._.J,.

    TORQUES USED FOR INSTALLATION OF HIGH STRENGTH BOLTS


    Basic Lead angle �l Nut-OD F (factor of Preload
    Size of Pitch of Tensile
    Bolt major Thds/in. at basic {coeffici (distance applied (70% tensile Torques Torques
    Sizes thds, in. stress
    (inches) diam, in n pitch diam entof between torque T on strength) (ft-lb) (N-m)
    p=l/n area, m.
    . 2
    D 'A. fiction) nut flats) preload F) A325

    .
    1(0.073) 0.073 64 0.0156 4 31'
    °
    0.0026 0.15 220
    °
    2(0.086) 0.086 56 0.0179 4 22' 0.0037 0.15 310
    °
    3(0.099) 0.099 48 0.0208 4 26' 0.0049 0.15 409
    °
    4(0.112) 0.112 40 0.0250 4 45' 0.0060 0.15 507
    0.15
    5(0.125) 0.125 40 0.0250 4° 11' 0.0080 0.15 668
    6(0.138) 0.138 32 0.0313 4°50' 0.0091 0.15 763
    °
    8(0.164) 0.164 32 0.0313 3 58' 0.0140 0.15 1,177
    \, )(0.190) 0.19 24 0.0417 4° 39' 0.0175 0.15 1,473
    12(0:216) 0.216 24 0.0417 4°01' 0.0242 0.15 2,030 ..
    0.15
    1/4 0.25 20 0.0500 4°11' 0.0318 0.15 7/16 0.0534 2,673 12 16
    5/16 0.3125 18 0.0556 3°40' 0.0524 0.15 4,404
    3/8 0.375 16 0.0625 3°24' 0.0775 0.15 9/16 0.0751 6,509 41 55
    7/16 0.4375 14 0.0714 3°20' 0.1063 0.15 8,930

    1/2 0.5 13 0.0769 3°07' 0.1419 0.15 3/4 0.0993 11,920 99 134
    9/16 0.5625 12 0.0833 2°59' 0.1819 0.15 15,283
    5/8 0.625 11 0.0909 2"56' 0.2260 0.15 15/16 0.1235 18,984 195 26S
    3/4 0.75 10 0.1000 2°40' 0.3345 0.15 1 1/4 0.1518 28,095 355 482
    7/8 0.875 9 0.1111 2° 31' 0.4617 0.15 1 7/16 0.1756 38,786 568 771

    1 1 8 0.1250 2°29' 0.6057 0.15 1 5/8 0.1998 50,883 847 1,150


    ,· ) l 1/8 1.125 7 0.1429 2°31' 0.7633 0.15 1 13/16 0.2245 56,101 1,049 1,425
    1 l/4 1.25 7 0.1429 2° 15' 0.9691 0.15 2 0.2470 71,230 1,466 1,990
    1 3/8 1.375 6 0.1667 2°24' 1.1549 0.15 84,884
    1 1/2. 1.5 6 0.1667 • 2° 11' 1.4053 0.15 2 3/8 0.2949 103,286 2,538 3,446
    1 3/4 1.75 5 012000 2°15' 1.8995 0.15 139,611

    2 2 4 1/2 0.2222 2°11' 2.4982 0.15


    2 l/4 2.25 4 1/2 0.2222 1°55' 3.2477 0.15
    °
    21/2 2.5 4 0.2500 1 57' 3.9988 0.15
    2 3/4 2.75 4 0.2500 1° 46' 4.9340 0.15
    0.15
    '3 3 4 0.2500 1°36' 5.9674 0.15
    3 1/4 3.25 4 0.2500 1°29' 7.0989 0.15
    3 l/2 3.5 4 0.2500 1 °22' 8.3286 0.15
    3 3/4 3.75 4 0.2500 1° 16' 9.6565 0.15
    4 4 4 0.2500 1° 11' 11.0826 0.15

    You might also like