AP1513

PWM Control 2A Step-Down Converter Features

- Input voltage: 3.6V to 18V. - Output voltage: 0.8V to VCC. - Duty ratio: 0% to 100% PWM control - Oscillation frequency: 300KHz typ. - Soft-start, Current limit, Enable function - Thermal Shutdown function - Built-in internal SW P-channel MOS - SOP-8L Pb-Free Package.

General Description
AP1513 consists of step-down switching regulator with PWM control. These devices include a reference voltage source, oscillation circuit, error amplifier, internal PMOS and etc. AP1513 provides low-ripple power, high efficiency, and excellent transient characteristics. The PWM control circuit is able to vary the duty ratio linearly from 0 up to 100%. This converter also contains an error amplifier circuit as well as a soft-start circuit that prevents overshoot at startup. An enable function, an over current protect function and a short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced from 300KHz to 30KHz. Also, an internal compensation block is built in to minimum external component count. With the addition of an internal P-channel Power MOS, a coil, capacitors, and a diode connected externally, these ICs can function as step-down switching regulators. They serve as ideal power supply units for portable devices when coupled with the SOP8L mini-package, providing such outstanding features as low current consumption. Since this converter can accommodate an input voltage up to 18V, it is also suitable for the operation via an AC adapter.

Applications
- PC Motherboard - LCD Monitor - Graphic Card - DVD-Video Player - Telecom Equipment - ADSL Modem - Printer and other Peripheral Equipment - Microprocessor core supply - Networking power supply

Pin Assignments

Pin Descriptions
Name FB Pin Description 1 Feedback pin. Power-off pin H: Normal operation (Step-down operation) 2 L: Step-down operation stopped (All circuits deactivated) Add an external resistor to set 3 max output current. 4 IC power supply pin Switch Pin. Connect external inductor/diode here. Minimize 56 trace area at this pin to reduce EMI. 78 GND Pin

FB 1 EN 2 AP1513 OCSET 3 VCC 4

8 7 6 5

Vss Vss Output Output

EN

OCSET VCC Output VSS

This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product.

Rev. 1.3 Nov 17, 2005 1/7

AP1513
PWM Control 2A Step-Down Converter Ordering Information
AP 1513 X X Package S: SOP-8L Packing Blank : Tube A : Taping

Block Diagram
Output Oscillation Circuit Vcc PWM-Switched Control Circuit Thermal Shutdown VEN 100uA Vss
+

Reference Voltage Source with Soft Start

FB
-

EN

OCSET

Absolute Maximum Ratings

Symbol VCC VFB VEN VOUTPUT PD TOPR VCC Pin Voltage Feedback Pin Voltage EN Pin Voltage Switch Pin Voltage Power Dissipation Operating Temperature Range Parameter Rating VSS - 0.3 to VSS + 20 VSS - 0.3 to VCC VSS - 0.3 to VIN + 0.3 VSS - 0.3 to VIN + 0.3 Internally limited -20 to +125 Unit V V V V mW
o o

TSTG Storage Temperature Range -40 to +150 C Caution: The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.

Anachip Corp. www.anachip.com.tw 2/7

Rev. 1.3

Nov 17, 2005

AP1513
PWM Control 2A Step-Down Converter Electrical Characteristics (VIN = 12V, Ta=25C, unless otherwise specified)
Symbol VIN VFB IFB ISW ISSS Parameter Input Voltage Feedback Voltage Feedback Bias Current Switch Current Current Consumption During Power Off Conditions -IOUT=0.1A IOUT=0.1A -VEN =0V VIN=5V~18V IOUT=0.1 to 2A Measure waveform at SW pin Measure waveform at SW pin Evaluate oscillation at SW pin Evaluate oscillation stop at SW pin ----VIN=5V, VFB=0V VIN=12V, VFB=0V VIN=12V, VOUT = 5V IOUT=2A Min. 3.6 0.784 2.5 240 10 2.0 75 0.3 Typ. 0.8 0.1 10 1 0.2 300 20 -10 90 2 110 70 92 65 Max. 18 0.816 0.5 2 0.5 400 0.8 105 5 150 100 o

Unit V V A A A % % KHz KHz V A A A ms m % C/W

VOUT Line Regulation /VOUT VOUT Load Regulation /VOUT fOSC Oscillation Frequency Frequency of Current Limit fOSC1 or Short Circuit Protect VSH EN Pin Input Voltage VSL EN Pin Input Leakage ISH Current ISL IOCSET OCSET Pin Bias Current TSS Soft-Start Time RDSON Internal MOSFET Rdson EFFI JA Efficiency Thermal Resistance Junction-to-Ambient

Typical Application Circuit

VIN ROCSET COCSET 3K Option CIN 470uF CVcc 0.1uF REN 100K CEN 0.1uF OCSET EN VSS D1 RB 1.3K Vcc L1 Output 33uH CC Optional FB RA 6.8K VOUT=5V/2A

AP1513

+ -

+ -

COUT 470uF

0.1uF

Note: VOUT = VFB x (1+RA/RB) RB=0.7K~5K ohm

VOUT L1 Value

VIN=12V, IMAX=2A 2.5V 3.3V 22uH 27uH

5V 33uH

Anachip Corp. www.anachip.com.tw 3/7

Rev. 1.3

Nov 17, 2005

AP1513
PWM Control 2A Step-Down Converter Typical Performance Characteristics
AP1513 Vin v.s. Frequency (Vout=3.3V; Iout=0.2A)

350 345 340 Fosc (KHz) 330 325 320 315 310 0 335

0.84 0.83 0.82 0.81 0.80 0.79 0.78 0.77 0.76 0.75 0.74 0

AP1513 Vin v.s. FB (Vout=3.3V; Iout=0.2A)

10 12 Vin (V)

14

16

18

20

FB (V)

Vin (V)

10

12 14

16 18

20

3.40 3.35

AP1513 Line Regulation (Vout=3.3V; Iout=0.2A)

Vout (V)

3.25 3.20 3.15 3.10

Vout (V)

3.30

5.10 5.09 5.08 5.07 5.06 5.05 5.04 5.03 5.02 5.01 5.00 0.0

AP1513 Load Regulation (Vin=12V)

Vin (V)

10 12 14 16 18 20

0.5

1.0

Iout (A)

1.5

2.0

2.5

AP1513 Efficiency
100 90 80

Efficiency (%)

70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 Vout:5.0V Vout:3.3V

Iout (A)

Anachip Corp. www.anachip.com.tw 4/7

Rev. 1.3

Nov 17, 2005

AP1513
PWM Control 2A Step-Down Converter Typical Performance Characteristics (Continued)
AP1513 Vout Ripple (Vin=12V; Vout=3.3V; Iout=0.1A) AP1513 Vout Ripple (Vin=12V; Vout=3.3V; Iout=2A)

Test Circuit
Oscillation open VCC OUTPUT FB open

A +

VCC

OUTPUT

FB

OCSET
A

EN

VSS

OCSET EN

VSS

VCC
+ -

OUTPUT

FB

OCSET EN VSS
+ V

Anachip Corp. www.anachip.com.tw 5/7

Rev. 1.3

Nov 17, 2005

AP1513
PWM Control 2A Step-Down Converter Function Description
PWM Control The AP1513 consists of DC/DC converters that employ a pulse-width modulation (PWM) system. In converters of the AP1513, the pulse width varies in a range from 0 to 100%, according to the load current. The ripple voltage produced by the switching can easily be removed through a filter because the switching frequency remains constant. Therefore, these converters provide a low-ripple power over broad ranges of input voltage and load current. Under Voltage Lockout The under voltage lockout circuit of the AP1513 assures that the high-side MOSFET driver outputs remain in the off state whenever the supply voltage drops below 3.3V. Normal operation resumes once VCC rises above 3.5V. RDS(ON) Current Limiting The current limit threshold is setting by the external resistor connecting from VCC supply to OCSET. The internal 100uA sink current crossing the resistor sets the voltage at the pin of OCSET. When the PWM voltage is less than the voltage at OCSET, an over-current condition is triggered.
ILOAD RDS(ON) = IOCSET ROCSET

See above formula for setting the current limit value.

Marking Information
( Top View )

5
Logo

AP1513 YY WW X

Part no. ID code: internal Xth week: 01~52 Year: "01" =2001 "02" =2002

Anachip Corp. www.anachip.com.tw 6/7

Rev. 1.3

Nov 17, 2005

AP1513
PWM Control 2A Step-Down Converter Package Information
Package Type: SOP-8L

L VIEW "A"

D 7 (4X) A2 A

0.015x45

7 (4X)

A1

B y

VIEW "A"

Symbol A A1 A2 B C D E e H L y

Dimensions In Millimeters Min. Nom. Max. 1.40 1.60 1.75 0.10 0.25 1.30 1.45 1.50 0.33 0.41 0.51 0.19 0.20 0.25 4.80 5.05 5.30 3.70 3.90 4.10 1.27 5.79 5.99 6.20 0.38 0.71 1.27 0.10 8O 0O

Dimensions In Inches Min. Nom. Max. 0.055 0.063 0.069 0.040 0.100 0.051 0.057 0.059 0.013 0.016 0.020 0.0075 0.008 0.010 0.189 0.199 0.209 0.146 0.154 0.161 0.050 0.228 0.236 0.244 0.015 0.028 0.050 0.004 0O 8O

Anachip Corp. www.anachip.com.tw 7/7

Rev. 1.3

Nov 17, 2005