Arduino Nano3 0
Arduino Nano3 0
User Manual
(V3.0)
Released under the Creative Commons Attribution Share-Alike 2.5 License http://creativecommons.org/licenses/by-sa/2.5/
Rev 3.0
1
D1/TX (1) D0/RX (2) RESET (3) GND (4) D2 (5) D3 (6) D4 (7) D5 (8) D6 (9) D7 (10) D8 (11) D9 (12) D10 (13) D11 (14) D12 (15)
(30) VIN (29) GND (28) RESET (27) +5V (26) A7 (25) A6 (24) A5 (23) A4 (22) A3 (21) A2 (20) A1 (19) A0 (18) AREF (17) 3V3 (16) D13
Name D0-D13 RESET GND 3V3 AREF A0-A7 +5V VIN I/O
Description Digital input/output port 0 to 13 Reset (active low) Supply ground +3.3V output (from FTDI) ADC reference Analog input channel 0 to 7 +5V output (from on-board regulator) or +5V (input from external power supply) Supply voltage
0.50
1.70
0.10
0.60 0.70