Scribd
Upload
230 views

Arduino Nano: User Manual

The document is a user manual for the Arduino Nano (V3.0) microcontroller board. It includes a pin layout diagram showing the names and functions of each pin on the board. It also includes a mechanical drawing with dimensions to show the physical size and layout of the board. The pin layout lists the pin numbers, names, types, and brief descriptions of each pin. The mechanical drawing shows the board is 1.70 inches long by 0.60 inches wide with component heights of up to 0.15 inches.

Uploaded by

Rafael Arturo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
230 views

Arduino Nano: User Manual

The document is a user manual for the Arduino Nano (V3.0) microcontroller board. It includes a pin layout diagram showing the names and functions of each pin on the board. It also includes a mechanical drawing with dimensions to show the physical size and layout of the board. The pin layout lists the pin numbers, names, types, and brief descriptions of each pin. The mechanical drawing shows the board is 1.70 inches long by 0.60 inches wide with component heights of up to 0.15 inches.

Uploaded by

Rafael Arturo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Arduino Nano (V3.

0)

User Manual

Released under the Creative Commons Attribution Share-Alike 2.5 License

http://creativecommons.org/licenses/by-sa/2.5/

More information:

www.arduino.cc Rev 3.0

1 
 
Arduino Nano Pin Layout

 
D1/TX (1) (30) VIN
D0/RX (2) (29) GND
RESET (3) (28) RESET
GND (4) (27) +5V
D2 (5) (26) A7
D3 (6) (25) A6
D4 (7) (24) A5
D5 (8) (23) A4
D6 (9) (22) A3
D7 (10) (21) A2
D8 (11) (20) A1
D9 (12) (19) A0
D10 (13) (18) AREF
D11 (14) (17) 3V3
D12 (15) (16) D13

Pin No. Name Type Description


1-2, 5-16 D0-D13 I/O Digital input/output port 0 to 13
3, 28 RESET Input Reset (active low)
4, 29 GND PWR Supply ground
17 3V3 Output +3.3V output (from FTDI)
18 AREF Input ADC reference
19-26 A0-A7 Input Analog input channel 0 to 7
27 +5V Output or +5V output (from on-board regulator) or
Input +5V (input from external power supply)
30 VIN PWR Supply voltage

 
 
 
 
 
 

2 
 
Arduino Nano Mechanical Drawing

0.07 (4)
0.15
0.50

0.50

1.70

0.10

0.60

0.70

3 
 

You might also like