Scribd
Upload
389 views

Arduino Nano User Manual

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P microcontroller. It contains all the necessary components to support the microcontroller and can be powered via USB or an external power supply. The board has 14 digital input/output pins, 8 analog inputs, a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It is compatible with all Arduino shields and has dimensions of 0.70" x 1.70".

Uploaded by

Leonardo Garcia
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
389 views

Arduino Nano User Manual

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P microcontroller. It contains all the necessary components to support the microcontroller and can be powered via USB or an external power supply. The board has 14 digital input/output pins, 8 analog inputs, a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It is compatible with all Arduino shields and has dimensions of 0.70" x 1.70".

Uploaded by

Leonardo Garcia
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Arduino Nano (V3.

0)

User Manual

Released under the Creative Commons Attribution Share-Alike 2.5 License

http://creativecommons.org/licenses/by-sa/2.5/

More information:

www.arduino.cc Rev 3.0

1 
 
Arduino Nano Pin Layout

 
D1/TX (1) (30) VIN
D0/RX (2) (29) GND
RESET (3) (28) RESET
GND (4) (27) +5V
D2 (5) (26) A7
D3 (6) (25) A6
D4 (7) (24) A5
D5 (8) (23) A4
D6 (9) (22) A3
D7 (10) (21) A2
D8 (11) (20) A1
D9 (12) (19) A0
D10 (13) (18) AREF
D11 (14) (17) 3V3
D12 (15) (16) D13

Pin No. Name Type Description


1-2, 5-16 D0-D13 I/O Digital input/output port 0 to 13
3, 28 RESET Input Reset (active low)
4, 29 GND PWR Supply ground
17 3V3 Output +3.3V output (from FTDI)
18 AREF Input ADC reference
19-26 A0-A7 Input Analog input channel 0 to 7
27 +5V Output or +5V output (from on-board regulator) or
Input +5V (input from external power supply)
30 VIN PWR Supply voltage

 
 
 
 
 
 

2 
 
Arduino Nano Mechanical Drawing

0.07 (4)
0.15
0.50

0.50

1.70

0.10

0.60

0.70

3 
 
4/12/2010 9:19:36 AM f=0.94 C:\Users\PAN\Documents\eagle\Arduino Nano30_2010\Arduino Nano30_2010.sch (Sheet: 1/1)
Specifications:

Microcontroller Atmel ATmega328


Operating Voltage (logic level) 5V
Input Voltage (recommended) 7-12 V
Input Voltage (limits) 6-20 V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 8
DC Current per I/O Pin 40 mA
Flash Memory 32 KB (of which 2KB used by
bootloader)
SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Dimensions 0.70” x 1.70”

Electronics Source Co.,Ltd Website : http://www.es.co.th


7/129 Central Pinklao Bldg., 17FL., Unit 1702 Email : [email protected]
Baromrachonnee Rd., Bangkok-noi, Bangkok 10700 Tel : (662) 884-9210 (6 line)
Fax : (662) 884-9213-4

You might also like