Search Results (996)

Microbial metal corrosion has become an important topic in metal research, which is one of the main causes of equipment damage, energy loss, and economic loss. At present, the research on microbial metal corrosion focuses on the characteristics of corrosion products, the environmental conditions affecting corrosion, and the measures and means of corrosion prevention, etc. In contrast, the main microbial taxa involved in metal corrosion, their specific role in the corrosion process, and the electron transfer pathway research are relatively small. This paper summarizes the mechanism of microbial carbon steel corrosion caused by SRB, including the cathodic depolarization theory, acid metabolite corrosion theory, and the biocatalytic cathodic sulfate reduction mechanism. Based on the reversible nature of electron transfer in biofilms and the fact that electrons must pass through the extracellular polymers layer between the solid electrode and the cell, this paper focuses on three types of electrochemical mechanisms and electron transfer modes of extracellular electron transfer occurring in microbial fuel cells, including direct-contact electron transfer, electron transfer by conductive bacterial hair proteins or nanowires, and electron shuttling mediated by the use of soluble electron mediators. Finally, a more complete pathway of electron transfer in microbial carbon steel corrosion due to SRB is presented: an electron goes from the metal anode, through the extracellular polymer layer, the extracellular membrane, the periplasm, and the intracellular membrane, to reach the cytoplasm for sulfate allosteric reduction. This article also focuses on a variety of complex components in the extracellular polymer layer, such as extracellular DNA, quinoline humic acid, iron sulfide (FeS_X), Fe³⁺, etc., which may act as an extracellular electron donor to provide electrons for the SRB intracellular electron transfer chain; the bioinduced mineralization that occurs in the SRB biofilm can inhibit metal corrosion, and it can be used for the development of green corrosion inhibitors. This provides theoretical guidance for the diagnosis, prediction, and prevention of microbial metal corrosion. Full article

Zinc, along with magnesium and iron, is considered one of the most promising biodegradable metals. Compared with magnesium and iron, pure Zn exhibits poor mechanical properties, despite its mild biological corrosion behavior and beneficial biocompatibility. Laser powder bed fusion (LPBF), unlike traditional manufacturing techniques, has the capability to rapidly manufacture near-net-shape components. At present, although the combination of LPBF and Zn has made great progress, it is still in its infancy. Element loss and porosity are common processing problems for LPBF Zn, mainly due to evaporation during melting under a high-energy beam. The formation quality and properties of the final material are closely related to the alloy composition, design and processing. This work reviews the state of research and future perspective on LPBF zinc from comprehensive assessments such as powder characteristics, alloy composition, processing, formation quality, microstructure, and properties. The effects of powder characteristics, process parameters and evaporation on formation quality are introduced. The mechanical, corrosion, and biocompatibility properties of LPBF Zn and their test methodologies are introduced. The effects of microstructure on mechanical properties and corrosion properties are analyzed in detail. The practical medical application of Zn is introduced. Finally, current research status is summarized together with suggested directions for advancing knowledge about LPBF Zn. Full article

Cancer, the second leading cause of death worldwide, demands the identification of modifiable risk factors to optimize its prevention. Diet has emerged as a pivotal focus in current research efforts. This literature review aims to enhance the ACS guidelines on diet and cancer by integrating the latest findings and addressing unresolved questions. The methodology involved an advanced PubMed search with specific filters relevant to the research topic. Topics covered include time-restricted diet, diet quality, acid load, counseling, exercise and diet combination, Mediterranean diet, vegetarian and pescetarian diets, weight loss, dairy consumption, coffee and tea, iron, carbohydrates, meat, fruits and vegetables, heavy metals, micronutrients, and phytoestrogens. The review highlights the benefits of the Mediterranean diet in reducing cancer risk. Adherence to overnight fasting or carbohydrate consumption may contribute to cancer prevention, but excessive fasting may harm patients’ quality of life. A vegetarian/pescetarian diet is associated with lower risks of general and colorectal cancer compared to a carnivorous diet. High heme and total iron intake are linked to increased lung cancer risk, while phytoestrogen intake is associated with reduced risk. Coffee and tea have a neutral impact on cancer risk. Finally, the roles of several preventive micronutrients and carcinogenic heavy metals are discussed. Full article

The rising demand for plant-based alternatives to traditional meat products has led to the development of plant-based sausages (PBSs) that closely mimic the texture and taste of their meat counterparts. This study investigates the rheological and textural properties, as well as proton molecular dynamics, of hot dog-type PBSs and batters used in their production. Various formulations were analyzed to understand how different ingredients and processing methods affect the characteristics of the final products. Our findings reveal that the incorporation of specific plant proteins and hydrocolloids significantly influences the rheological behavior and texture profile of sausages. The hardness of the samples ranged from 4.33 to 5.09 N/mm and was generally higher for the products with inorganic iron sources. Regarding the viscoelastic properties, all the samples showed larger values of the storage modulus than the loss modulus, which indicates their solid-like behavior. Additionally, the study utilized advanced proton nuclear magnetic resonance (NMR) techniques to elucidate the molecular dynamics within plant-based matrices, providing insights into water distribution and mobility. Key findings highlight the impact of different plant proteins and additives on the texture and stability of sausage analogs. Full article

Grapes are susceptible to mold and decay during postharvest storage, and developing new technologies to extend their storage period has important application value. Photodynamic technology (PDT) in concurrence with carbon dots (CDs) proposes an innovative and eco-friendly preservation strategy. We examined the effects of carbon dots combined with photodynamic treatment on postharvest senescence and antioxidant system of table grape. The compounding of photodynamic technology with a 0.06 g L⁻¹ CDs solution could possibly extend the postharvest storage period of grape berries. Through this strategy, we achieved a decreased rate of fruit rotting and weight loss alongside the delayed deterioration of fruit firmness, soluble solids, and titratable acid. As paired with photodynamic technology, CDs considerably decreased the postharvest storage loss of phenols, flavonoids, and reducing sugars as compared to the control group. Concurrently, it remarkably postponed the build-up of hydrogen peroxide (H₂O₂), superoxide anion (O₂^∙−), and malondialdehyde (MDA); elevated the levels of reduced ascorbic acid (AsA) and reduced glutathione (GSH); lowered the levels of dehydroascorbic acid (DHA) and oxidized glutathione (GSSG); raised the ratios of AsA/DHA and GSSH/GSSG; encouraged the activities of superoxide dismutase (SOD) and phenylalanine ammonia-lyase (PAL); and inhibited the activities of polyphenol oxidase (PPO) and lipoxygenase (LOX). Furthermore, it enhanced the iron reduction antioxidant capacity (FRAP) and DPPH radical scavenging capacity of grape berries. CDs combined with photodynamic treatment could efficiently lessen postharvest senescence and decay of grape berry while extending the storage time. Full article

To improve the magnetic properties of iron-based soft magnetic composites (SMCs), polytetrafluoroethylene (PTFE) with excellent heat resistance, electrical insulation, and extremely high electrical resistivity was chosen as an insulating coating material for the preparation of iron-based SMCs. The effects of PTFE content, compaction pressure, and annealing treatment on the magnetic properties of Fe/PTFE SMCs were investigated in detail. The results demonstrate that the PTFE insulating layer is successfully coated on the surface of iron powders, which effectively reduces the core loss, increases the resistivity, and improves the frequency stability and the quality factor. Under the combined effect of optimal PTFE content, compaction pressure, and annealing treatment, the iron-based SMCs exhibit a high effective permeability of 56, high saturation magnetization of 192.9 emu/g, and low total core losses of 355 mW/cm³ and 1705 mW/cm³ at 50 kHz for B_m = 50 mT and 100 mT. This work provides a novel insulating coating layer that optimizes magnetic properties and is advantageous for the development of iron-based SMCs. In addition, it also provides a comprehensive understanding of the relationship between process parameters and magnetic properties, which is of great guiding significance for scientific research and industrial production. Full article

Power loss is a limiting factor for batteries and individual cells. The resulting heat generation due to the power loss leads to reduced battery performance and, thus, lower efficiency. These losses are largely due to the internal resistance of the cells. Therefore, it is important to accurately determine the value of the internal resistance of lithium–ion cells. From the literature, it was found that there are three widely used internal resistance-measurement methods (current step method, direct-energy-loss method, and calorimeter measurement), with negligible research on their comparison demonstrating the most efficient method. Henceforth, to find the most optimal method, this research adopts all three methods on a variety of cell chemistries, including Lithium-ion Manganese Oxide (LMO), Lithium Iron Phosphate (LFP), Nickel Manganese Cobalt (NMC), and Lithium Titanium-Oxide (LTO) for different c-rates (1 C, 2 C, and 3 C), with a wide temperature range (from 0 °C to 40 °C). Full article

Interior permanent magnet synchronous machines (IPMSMs) are widely used as traction motors in the electric drive-train because of their high torque-per-ampere characteristics and potential for wide field weakening operation to expand the constant power range. The paper aims to introduce the most important equations to calculate the operating trajectories of an IPMSM for optimal control. The main contribution is that the optimal operating trajectories are calculated by a feedforward, Newton–Raphson method-based searching algorithm that considers the iron loss resistance of IPMSMs. Steady-state calculations and dynamic simulation results prove the theoretical findings. Full article

In order to improve the wear and corrosion resistance and enhance the tribological and mechanical properties of gray cast iron, the laser surface cladding technique was employed to fabricate double-layer coatings with different Ni/WC ratios on the surface of gray cast iron. The effects of laser processing parameters and the type of Ni-based alloy on the microstructure and properties of the gray cast iron matrix and laser-clad layer were investigated. A 316L stainless steel transition layer was introduced between the gray cast iron substrate and the Ni/WC coating to prevent the cladding layer from cracking. The tribological and mechanical properties of the laser-clad coatings were characterized with various tests at the macro- and micro-scales; the residual stresses on the coating surfaces were measured, and electrochemical tests were also carried out. The microstructures of the clad layers were analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD). The results show that the laser-clad layers exhibit excellent vibration and noise reduction performance, which is partially due to the reduction and stabilization of the coefficients of friction (COFs) and the high levels of compressive residual stress on the surface of the laser-clad layers. The wear and corrosion resistance of the laser-clad layers are significantly improved, and the maximum wear loss of the laser-clad coating was about only 5% of that of the unclad gray cast iron substrate. This research has significance for the laser surface modification of cast iron, steel, and other metals, which is an increasingly important topic, especially in the automotive friction brake industry. Full article

The prevalence of sarcopenia (loss of muscle strength, mass and function) in individuals with heart failure (HF) stands at a considerable level (approximately 20%), contributing to heightened mortality rates and diminished quality of life. The underlying pathophysiological mechanisms involve the presence of low-grade inflammation and a disturbance of the anabolic–catabolic protein balance. The nutritional assessment of patients with HF is a key aspect, and diverse diagnostic tools are employed based on patient profiles (outpatient, inpatient and nursing home). The Global Leadership Initiative on Malnutrition (GLIM) criteria serves as a consensus for diagnosing malnutrition. Given that edema can impact body mass index (BMI) in patients with HF, alternative body assessment technical methods, such as bioelectrical vector impedance (BiVA), BIA (without vector mode), computer tomography (CT) or clinical ultrasound (US), are useful. Scientific evidence supports the efficacy of both aerobic and resistance physical exercises in ameliorating and preventing muscle wasting associated with HF. Dietary strategies emphasize the importance of protein intake, while certain micronutrients like coenzyme Q10 or intravenous iron may offer benefits. This narrative review aims to present the current understanding of the pathogenesis, diagnosis and treatment of muscle loss in individuals with heart failure and its consequential impact on prognosis. Full article

Optimizing the interface between a magnetic powder matrix and an oxide-insulating layer is an effective method to improve the permeability and lower eddy current loss of iron-based soft magnetic composites. In this study, in order to improve the bonding strength of the substrate and insulation layer, soft magnetic composites were prepared by pressing and heat treating with reduced iron powder as a magnetic matrix, high-temperature MgO nanoparticles as insulating coating, and phenolic resin as an adhesive. The effects of MgO content on the microstructure and magnetic properties of the composites were investigated. The results of a scanning electron microscopy and an energy-dispersive spectrometer analysis corroborate that the results obtained regarding the frequency characteristics and the resistivity of the iron powder agree with the scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) analysis and confirm their improvement by the presence of an insulating layer of MgO. The resistivity of the sample coated with 4 wt.% MgO is nearly 45 times higher than that of the uncoated sample under the same conditions. The MgO-insulating film formed on the surface of iron powder makes the coated sample have low effective grain size, high resistivity, and low magnetic loss at a high frequency. At 1 kHz, the magnetic loss of the 4 wt.% MgO-coated sample is reduced by 77.3%, and the magnetic loss is only 5.8% compared with the uncoated sample at 50 kHz. This magnetic loss separation study shows that the addition of MgO insulation material can effectively reduce the eddy current loss of the magnetic powder core. The 4 wt.% MgO-coated sample has the lowest hysteresis loss factor and relatively low eddy current loss factor, so it can be determined that the addition of 4 wt.% MgO is the optimum content to attain a low magnetic loss. Full article

This study aims to develop low-cost, eco-friendly, and circular economy-compliant composite materials by creating three types of magnetorheological suspensions (MRSs) utilizing lard, carbonyl iron (CI) microparticles, and varying quantities of gelatin particles (GP). These MRSs serve as dielectric materials in cylindrical cells used to fabricate electric capacitors. The equivalent electrical capacitance (C) of these capacitors is measured under different magnetic flux densities (B≤160 mT) superimposed on a medium-frequency electric field (f = 1 kHz) over a period of 120 s. The results indicate that at high values of B, increasing the GP content to 20 vol.% decreases the capacitance C up to about one order of magnitude compared to MRS without GP. From the measured data, the average values of capacitance Cm are derived, enabling the calculation of relative dielectric permittivities (ϵr′) and the dynamic viscosities (η) of the MRSs. It is demonstrated that ϵr′ and η can be adjusted by modifying the MRS composition and fine-tuned through the magnetic flux density B. A theoretical model based on the theory of dipolar approximations is used to show that ϵr′, η, and the magnetodielectric effect can be coarsely adjusted through the composition of MRSs and finely adjusted through the values B of the magnetic flux density. The ability to fine-tune these properties highlights the versatility of these materials, making them suitable for applications in various industries, including electronics, automotive, and aerospace. Full article

A series of morpholine salt volatile corrosion inhibitors (VCIs) were synthesized via solid-phase chemical reactions. The corrosion inhibition performance was assessed using evaporation weight loss, VCI capability, and corrosion weight loss tests. The corrosion inhibition mechanisms of the morpholine salt VCIs for carbon steel in atmospheric conditions were explored through electrochemical testing under thin film electrolytes, X-ray photoelectron spectroscopy (XPS), and computational simulations. Morpholine carbonate exhibited higher volatility. Corrosion weight loss tests showed an >85% reduction for steel treated with morpholine benzoate or morpholine carbonate. The inhibitors’ inhibition mechanism, elucidated through X-ray photoelectron spectroscopy (XPS) and computational simulations, revealed that morpholine carbonate and benzoate form protective layers via physical and chemical adsorption on the steel surface, coordinating with iron atoms through nitrogen and oxygen atoms. Quantum chemical calculations demonstrated that morpholine carbonate had stronger adsorption energy and electron transfer capabilities, indicating superior corrosion inhibition performance over morpholine benzoate. Full article

This article highlights a case of high-dose ferric carboxymaltose (Ferinject^®) for the treatment of perioperative iron deficiency anaemia in a 39-year-old patient with dysplastic coxarthrosis. The patient was admitted routinely for a total hip replacement of the left hip joint. She had been suffering from pain, lameness, and restriction of movement in her left hip joint for the past several years. The patient was admitted with initial iron deficiency anaemia of a medium severity (Hgb—96.5 g/L, RBC—3.97 × 10¹²/L). Laboratory tests were taken to determine the iron deficiency, and transfusion readiness was submitted. The patient received ferric carboxymaltose infusion before surgery. The intraoperative blood loss was—100 mL with an operation duration of 50 min. On the first postoperative day, haemoglobin decreased to 86 g/L. No haemoglobin decrease was observed in the postoperative period, and 92 g/L was the amount of haemoglobin at the time of hospital discharge. The optimal dose for the treatment of perioperative anaemia has not been established; some studies recommend ferric carboxymaltose at a dose of 15 to 20 mg/kg and a maximum of 1000 mg once on the first day after surgery. The uniqueness of this case report is that a high dose of ferric carboxymaltose (1340 mg) during the preoperative period was applied. No side effects such as hypophosphatemia were reported. We believe that, in this clinical case, the patient managed to avoid large intraoperative blood loss and transfusions by using high doses of ferric carboxymaltose. Full article

Multiple sclerosis (MS) is a chronic inflammatory neurodegenerative disease leading to progressive demyelination and neuronal loss, with extensive neurological symptoms. As one of the most widespread neurodegenerative disorders, with an age onset of about 30 years, it turns out to be a socio-health and economic issue, thus necessitating therapeutic interventions currently unavailable. Loss of integrity in the blood–brain barrier (BBB) is one of the distinct MS hallmarks. Brain homeostasis is ensured by an endothelial cell-based monolayer at the interface between the central nervous system (CNS) and systemic bloodstream, acting as a selective barrier. MS results in enhanced barrier permeability, mainly due to the breakdown of tight (TJs) and adherens junctions (AJs) between endothelial cells. Specifically, proinflammatory mediator release causes failure in cytoplasmic exposure of junctions, resulting in compromised BBB integrity that enables blood cells to cross the barrier, establishing iron deposition and neuronal impairment. Cells with a compromised cytoskeletal protein network, fiber reorganization, and discontinuous junction structure can occur, resulting in BBB dysfunction. Recent investigations on spatial transcriptomics have proven circularRNAs (circRNAs) to be powerful multi-functional molecules able to epigenetically regulate transcription and structurally support proteins. In the present review, we provide an overview of the recent role ascribed to circRNAs in maintaining BBB integrity/permeability via cytoskeletal stability. Increased knowledge of the mechanisms responsible for impairment and circRNA’s role in driving BBB damage and dysfunction might be helpful for the recognition of novel therapeutic targets to overcome BBB damage and unrestrained neurodegeneration. Full article