Phase 1 Question Papers

GOVERNMENT OF INDIA
Date: - 04 April-2019 FIRST

th
MATE OF A FOREIGN GOING SHIP (PHASE – I)
FUNCTION: CARGO HANDLING AND STOWAGE (Management Level)
TIME: 3 Hours PASS MARKS: 120 MAX. MARKS: 200 Notes: 1. Questions
1, 2 and 3 are compulsory. Attempt any five questions of the remaining seven
questions. 2. All questions carry equal marks i.e. 25 Marks each.
Q.1 M. V. Hindship arrived Vizag port with drafts F: 7.23m, Mid: 8.3m & A: 9.23m in RD
of 1.010. After discharging partly she sailed drawing 6.20m on even keel with 8cms sag
in water of RD 1.020. Calculate how much cargo she discharged if she has
replenished in this port DO/110 mt & FW/240 mt & consumed 12 mt of DO and 65
mt of FW during her port stay.
Q.2 a) An oil tanker has a tank of dimensions 30m x 20m x 20m deep and is loading oil
at 38 C. It is desired to leave 2% of the volume of tank for expansions. Calculate the
O
quantity of oil and final ullage assuming that the vessel is at an even keel on
completion. Given that R.D. of oil at 25 C = 0.8540. Co-efficient of volume
O
expansion = 0.0006/ C.

O
b) A tank of dimensions 20mx15mx10m is being loaded with an oil at 30 C (relative

O
density at 20 C = 0.8681). It is desired to leave 3% of the vol. of oil for expansion.

O
Calculate the ullage of the oil and quantity of oil loaded. Given that Co-efficient of
vol. expansion = 0.0005/ C.
O
Q.3 Describe how you will secure hatch covers and explain various methods you will
use for testing the weather tightness of hatch covers.
Q.4 Write notes on following w.r.t. to tankers: i) ISGOTT ii) Slop Tanks iii) Tank cleaning
& Gas freeing iv) Deck Seal v) P/V Valve
Q.5 Describe the different methods of carriage off liquefied gases. What is re—
liquefaction of gas? How is it done on gas tankers?
Q.6 a) Write notes on IMDG code. b) Write notes on dangerous goods manifest.
Q.7 Enumerate the main hazards associated with the carriage of Coal in bulk. Also,
explain the precautions to be taken during its loading & carriage as per IMSBC Code.
Q.8 With reference to ‘Code of safe practice for carriage of Grain’. a) Define i) DOA ii)
Stability criteria for ships with DOA & without DOA b) What are the various methods of
reducing grain heeling moments on a ship loaded with grain in bulk, describe any one of
them.
Q.9 a) Describe the procedures for loading and carriage of refrigerated containers. b)
Briefly explain the need to monitor atmosphere in Ro-Ro spaces.
Q.10 a) Explain stowage and securing of deck timber cargo. b) Describe general outline
of refrigeration systems onboard Reefer ships.
--------------------------------------------------------------- XX
--------------------------------------------------------
GOVERNMENT OF INDIA
FIRST MATE OF A FOREIGN GOING SHIP (PHASE – I)
Date: - 08 Jan-2019
th

TIME: 3 Hours PASS MARKS: 120 MAX. MARKS: 200 Notes: 1. Questions
1, 2 and 3 are compulsory. Attempt any five questions of the remaining seven
questions. 2. All questions carry equal marks i.e. 25 Marks each.
PART -A Q.1 M. V. ‘Hindship’ arrived port in a partly loaded condition with drafts F
6.60 m, A 6.90 m and mid 6.80 m in water of density 1.012 t/m . Calculate the quantity
3
of cargo she can load if she is to sail into a Tropical zone on an even keel in SW,
with an expected sag of 5 cms. 50 t of fuel and fresh water is expected to be
consumed in port and 25 t during the down river passage. The draft marks are 2 m
aft of FP, 3m forward of AP and 2 m aft of midship.
Q.2 A box shaped cargo tank (L: 26.4m, B: 11.4m & D: 12.1m) had 6.54 m ullage
(temperature 44.3 C) from its ullage pipe that rises 107 cms above the top of the tank &
O
is located 3.4m to port of the centerline & 6.3m forward of the after bulkhead. Trim 3.2m
by stern, list 2.5 to port. LBP is 235.6 m. She transferred 1080 cubic meters of the same
O
oil at 26 C from her storage tank into the tank. Find the ullage if she is upright but
O
trimmed 2.0 m by head. The temperature on completion of transfer was 26 C. Oil O
density is 0.8313 ts/cu m at 15 C in vacuum. ASTM tables can be made use of. Q.3 a.
O
Describe the duties of dock inspector. b. Describe the common damage / defects that
may occur on watertight transverse bulkheads situated at the ends of dry cargo hold of
a bulk carrier.
PART B Q.4 a) Describe how to empty cargo tanks which are in inert condition are
cleaned and made gas free on a very large crude carrier prior to proceeding to dry-
docking repairs under statutory / class requirements. b) With the help of suitable
diagrams explain the working principle of educators? Q.5 a) Write contents of SMPEP
manual? Is it ship specific and who approves it? b) Under IGC code describe how ships
are classified as per the survival capability. Draw sketches to support your answer. Q.6
Explain the following with respect to the IMDG code
1. Dangerous cargo manifest. 2. Precautions when working with dangerous goods. 3.
Inspection by port authority before loading dangerous goods. Q.7 a) Describe lashing /
strapping for securing grain surface in partly filled compartment as per grain code? b)
Describe the maintenance to be carried out on hatch covers. Q.8 a) Write short notes
on:
1. Document of authorization 2. Grain loading stability booklet b) Explain the procedures
for operation of cargo hold for carriage of grain. Q.9 a) Discuss the planning and
preparations to be done before loading and unloading of vehicles on car carrier. b)
Describe procedures for opening closing and securing of hull opening on a RO-RO
ships. Q.10 What are the factors taken into planning and stowage of containers.
--------------------------------------------------------------- XX
--------------------------------------------------------
GOVERNMENT OF INDIA
Date: - 05 Oct-2018 FIRST MATE OF A FOREIGN GOING SHIP (PHASE – I)
th

TIME: 3 Hours PASS MARKS: 120 MAX. MARKS: 200 Notes: 1. All
questions in PART – A are compulsory, Attempt any five questions from PART – B. 2.
All questions carry equal marks i.e. 25 Marks each.
PART -A Q.1 M. V. ‘Hindship’ arrived port with the following drafts F 8.65 m, A 8.89 m,
Mid 8.81 m. Density of dockwater 1.016 weights on board: H.O. 350 t, D.O. 135 t, FW
162 t, L.O. 22t, and unpumpable ballast 54 t. If the constant and stores as determined
on completion of discharge was 160 t. Calculate the quantity of cargo discharged. Draft
marks are located 2m aft of FP, 4m ford of AP and 1m ford of midship.
Q.2 A box shaped tank L 30 m x B 18m x 20 m containing crude oil of density at 15 C =
O
0.8275 t/m had an ullage of 1.80 m as measured by a sonic Tape. The ullage port was
3
located 3 m fwd of the aft bulkhead. 1 m above the tank top and 2 m to port of centerline
of tank. Trim observed was 3 m and the vessel listed 1 to starboard. Observed temp
O
32.5 C. Calculate the quantity of oil in tank if the LBP of vessel was 215m.
O
Q.3 Explain how weather-tightness is maintained in the Hatch covers and what
precautions will you take for securing the hatch covers before proceeding to sea? PART B
Q.4 Write short notes on: i) Stowage Category ii) Compatibility group code iii)
Dangerous cargo Manifest. iv) EmS.
Q.5 a) Why is the Heel maintained on LPG, explain in detail? What are coolants and the
use these coolants on LPG? What do you understand by the term hot gassing – up? b)
State the contents of Procedure and Arrangements (P & A) manual as required under
Annex II of Marpol 73/78.
Q.6 With reference to IMDG CODE explain segregation criteria for carriage of
dangerous goods. Justify your answers with proper sketches.
Q.7 What are the hazards and procedures for loading coal in a Bulk carrier?
Q.8 As per IMO Grain code, describe briefly with sketches various methods of reducing
grain heeling moments on a ship loaded with grain.
Q.9 a) Prepare a Planned Maintenance System for hatch-covers. b) What are the
lashing requirements for Timber deck cargo as per “code of Safe Practice for Timber
Deck Cargo”?
Q.10 What all factors required to be considered into planning and stowage of
containers?

Phase 1 Question Papers

Uploaded by

Copyright:

Available Formats

Phase 1 Question Papers

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Phase 1 Question Papers

Uploaded by

Copyright:

Available Formats

GOVERNMENT OF INDIA

Date: - 04 April-2019 FIRST

expansion = 0.0006/ C.

b) A tank of dimensions 20mx15mx10m is being loaded with an oil at 30 C (relative

density at 20 C = 0.8681). It is desired to leave 3% of the vol. of oil for expansion.

FUNCTION: CARGO HANDLING AND STOWAGE (Management Level)

trimmed 2.0 m by head. The temperature on completion of transfer was 26 C. Oil O

FUNCTION: CARGO HANDLING AND STOWAGE (Management Level)

You might also like