Name - Tirth Joshi Class - Xii Roll No. - 2019-2020

Name – TIRTH JOSHI
Class – XII
Roll no. – 2019-2020

CONTENT Page no.
CERTIFICATE 1
ACKNOWLEDGEMENT 2
AIM OF PROJECT 3
INTRODUCTION 4-5
THEORY 6-11
OBSERVATION 12
CONCLUSION 13
APPLICATIONS OF EMI 14
PRECAUTIONS 15
BIBLIOGRAPHY 16
In preparation of my project, I had to take the help and
guidance of some respected persons, who deserve my
deepest gratitude. As the completion of this assignment
gave me much pleasure, I would like to show my
gratitude Mrs. Nikhil Sir, Physics teacher, at Vedant
International School for giving me good guidelines for
assignment throughout numerous consultations. I would
also like to expand my gratitude to all those who have
directly and indirectly guided me in writing this
assignment.
Many people, especially my classmates have made
valuable comment suggestions on my paper which gave
me an inspiration to improve the quality of the
assignment.
.
Electro Magnet:
An electromagnet i s a type of magnet in which the magnetic field is produced by
electric current. The magnetic field di sappears when the current is turned off.
Induction:
This process of generating current in a conductor by placing the conductor in a
changing magnetic field is called induction.
Electromagnetic Induction:
Electromagnetic induction is the production of a potential difference (voltage)
across a conductor when it is exposed to a varying magnetic field.
Electromagnetic induction is when an electromagnetic field causes molecules in
another object to flow. Induction can produce electricity (in coils), heat (in ferrous
metals), or waves (in a radio transmi tter).
Finally it is refers to the phenomenon where an emf is induced when the magnetic
flux linking a conductor changes.
Magnetic Flux is defined as the product of the magnetic flux density and the
area normal to the field through which the field is passing. It is a scalar quantity
and its S.I. unit is the weber (Wb).
φ = B A
Principle:
Electromagnetic induction (or sometimes just induction) is a process where a
conductor placed in a changing magnetic field (or a conductor moving through a
stationary magnetic fi eld) causes the production of a voltage across the conductor.
This process of electromagnetic induction, in turn, causes an electrical current - it
is said to induce the current.
Invention:
Michael Faraday is generally credited with the di scovery of induction in 1831
though it may have been anticipated by the work of Francesco Zantedeschi in 1829.
Around 1830 to 1832, Josep h Henry made a si milar discovery, but did not publish
hi s findings until later
Induced e.m.f.s:
If magnetic flux through a coil is altered then an e.m.f. will be generated in the coil.
This effect was first observed and explained by Ampere and Faraday between
1825 and 1831. Faraday discovered that an e.m.f. Could be generated either by,
(a) moving the coil or the source of flux relative to each other or by
(b) Changing the magnitude of the source of magnetic flux in some way. Note
that the e.m.f. Is only produced while the flux is changing.
For example, consider two coils as shown in Figure 1.

Coil A is connected to a galvanometer and coil B is connected to a battery and has
direct current flowing through it. Coil A is within the magnetic field produced by B
and an e.m.f. can be produced in A by moving the coils relative to each other or by
changing the size of the current in B. This can be done by using the rheostat R,
switching the current on or off, or (c) using an a.c. supply for B.
(An e.m.f. could also be produced in coil A by replacing coil B with a permanent
magnet and moving this relative to coil A.)
Representation:
Electromagnetic induction is the production of a potential difference (voltage)

across a conductor when it is exposed to a varying magnetic field.
Working and Construction:

Current is produced in a conductor when it is moved through a magnetic field
because the magnetic lines of force are applying a force on the free electrons in
the conductor and causing them to move. This process of generating current in a
conductor by placing the conductor in a changing magnetic field is called induction.
This is called induction because there is no p hysical connection between the
conductor and the magnet. The current i s said to be induced in the conductor by
the magnetic field.
One requirement for thi s electromagnetic induction to take place is that the
conductor, which is often a piece of wire, must be perpendicular to the magnetic
lines of force in order to produce the maximum force on the free electrons. The
direction that the induced current flows is determined by the direction of the lines
of force and by the direction the wire is moving in the field. In the ani mation
above the ammeter (the instrument used to measure current) indicates when there
is current in the conductor.
If an AC current i s fed through a piece of wire, the electromagnetic field that is
produced is constantly growing and shrinking due to the constantly changing
current in the wire. This growing and shrinking magnetic field can induce el ectrical
current in another wire that is held close to the first wire. The current in the
second wire will also be AC and in fact will look very similar to the current flowing
in the first wire.
It is common to wrap the wire into a coil to concentrate the strength of the
magnetic field at the ends of the coil. Wrapping the coil around an iron bar will
further concentrate the magnetic fi eld in the iron bar. The magnetic field will be
strongest inside the bar and at its ends (poles).
Lenz's Law:
When an emf is generated by a change in magnetic flux according to Faraday’s Law,

the polarity of the induced emf i s such that it produces a current whose magnetic
field opposes the change which produces it. The induced magnetic field inside any
loop of wire always acts to keep the magnetic flux in the loop constant. In the
examples below, if the B field is increasing, the induced field acts in opposition to
it. If it i s decreasing, the induced field acts in the direction of the applied field
to try to keep it constant.
Applications of electromagnetic Induction
Electrical Generator:
The EMF generated by Faraday's law of induction due to relative movement of a
circuit and a magnetic field is the p henomenon underlying electrical generators.
When a permanent magnet is moved relative to a conductor, or vice versa, an
electromotive force is created. If the wire is connected through an el ectrical load,
current will flow, and thus electrical energy is generated, converting the mechanical
energy of motion to electrical energy
Electrical transformer
The EMF predicted by Faraday's law is also responsible for el ectrical
transformers. When the electric current in a loop of wire changes, the changing
current creates a changing magnetic field. A second wire in reach of this magnetic
field will experience thi s change in magnetic field as a change in its coupled
magnetic flux, d ΦB / d t. Therefore, an electromotive force is set up in the second
loop called the induced EMF or transformer EMF. If the two ends of this loop are
connected through an electrical load, current will flow.
Magnetic flow meter:
Faraday's law is used for measuring the flow of el ectrically conductive liquids and
slurries. Such instruments are called magnetic flow meters. The induced voltage
ℇ generated in the magnetic field B due to a conductive liquid moving at velocity v
is thus given by:
Where ℓ is the distance between electrodes in the magnetic flow meter.

Faraday’s Law of
Electromagnetic Induction, first observed and published by
Michael Faraday in the mid-nineteenth century, describes a
very important electro-magnetic concept. Although its
mathematical representations are cryptic, the essence of
Faraday’s is not hard to grasp: it relates an induced electric
potential or voltage to a dynamic
magnetic field. This concept has
many far-reaching ramifications
that touch our lives in many ways:
from the shining of the sun, to
the convenience of mobile
communications, to electricity to
power our homes. We can all
appreciate the profound impact
Faraday’s Law has on us.
The principles of electromagnetic induction are
applied in many devices and systems, including:
 Electrical generators
 Induction motors
 Induction sealing
 Inductive charging
 Transformers
 Wireless energy transfer
Keep yourself safe from high voltage.
Use & handle lab instruments with care.
Do not scratch insulated copper wire while

making loop.
Do not use digital voltmeter for above

demonstration .
 Wikipedia.com
 Google search engine
 Physics Ncert book for class XII

Name - Tirth Joshi Class - Xii Roll No. - 2019-2020

Uploaded by

Copyright:

Available Formats

Name - Tirth Joshi Class - Xii Roll No. - 2019-2020

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Name - Tirth Joshi Class - Xii Roll No. - 2019-2020

Uploaded by

Copyright:

Available Formats

Name – TIRTH JOSHI

Roll no. – 2019-2020

For example, consider two coils as shown in Figure 1.

Electromagnetic induction is the production of a potential difference (voltage)

Working and Construction:

When an emf is generated by a change in magnetic flux according to Faraday’s Law,

Applications of electromagnetic Induction

Where ℓ is the distance between electrodes in the magnetic flow meter.

Use & handle lab instruments with care.

Do not scratch insulated copper wire while

Do not use digital voltmeter for above

You might also like