Search Results (135)

The exploration of porphyry deposits in Greenland has become increasingly important due to their significant economic potential. We utilized total magnetic intensity (TMI) and mobile magnetotelluric (MobileMT) airborne data to delineate potential porphyry mineralization zones. The TMI method was employed to map variations in the Earth’s magnetic field caused by subsurface geological features, including mineral deposits. By analyzing anomalies in TMI data, potential porphyry targets were identified based on characteristic magnetic signatures associated with mineralized zones. Complementing TMI data, MT airborne surveys provided valuable insights into the electrical conductivity structure of the subsurface. Porphyry deposits exhibited distinct conductivity signatures due to the presence of disseminated sulfide minerals, aiding in their identification and delineation. Integration of the TMI and MobileMT datasets allowed for a comprehensive assessment of porphyry exploration targets in Flammefjeld. The combined approach facilitates the identification of prospective areas with enhanced geological potential, optimizing resource allocation and exploration efforts. Overall, this study demonstrates the efficacy of integrating TMI and MobileMT airborne data for porphyry exploration in Greenland, offering valuable insights for mineral exploration and resource development in the region. Full article

Over the past few years, there has been a noticeable change in the occurrence of seismic disasters in Sichuan, China. The focus has shifted from Western Sichuan to the previously more stable Southeastern Sichuan. The recent Ms6.0 earthquake in Luxian, Southeastern Sichuan, on 16 September 2021, has once again captured the interest of scholars, who are closely examining the seismogenic environment and potential seismic hazards in the region. We conducted a magnetotelluric (MT) array survey in the Luxian earthquake area to explore the deep seismogenic environment of the 2021 Luxian Ms6.0 earthquake zone and understand the potential effects of industrial extraction on seismic activities. Here are the insights we obtained: Underneath the anticline in the Luxian Ms6.0 earthquake area, there is a structure that mainly exhibits high resistance. On the other hand, beneath the syncline, a structure with medium to low resistance is observed. The epicenter of the mainshock was identified near the intersection of high- and low-resistance media within the Fuji syncline area. Smaller aftershocks that followed the mainshock were mainly concentrated in the low-resistance layers at depths of 3–5 km in the Fuji syncline area. MT survey results have confirmed the existence of a detachment zone in the shallow crust near the epicenter of the Luxian Ms6.0 earthquake. It is believed that this detachment layer played a significant role in the seismogenic process of the Luxian Ms6.0 earthquake. During different stress conditions, this layer became active and caused the compression and faulting of a hidden fault below, resulting in the Luxian Ms6.0 earthquake. After the main earthquake, a series of smaller aftershocks with varying focal mechanisms occurred as the stress fields continued to release. It is important to note that the Luxian Ms6.0 earthquake highlights the ongoing high stress levels in the southern region of the Sichuan Basin. This emphasizes the need for continued monitoring and consideration of potential seismic hazards in the southern Sichuan area. Full article

Due to the complex intersection and control of multiple structural systems, the hydrogeological conditions of the Laiyuan Basin in China are complex. The depth of research on the relationship between geological structure and groundwater migration needs to be improved. The supply relationship of each aquifer is still uncertain. This paper systematically conducts research on the characteristics of hydrogen and oxygen isotopes, and combines magnetotelluric impedance tensor decomposition and two-dimensional fine inversion technology to carry out fine exploration of the strata and structures in the Laiyuan Basin, as well as comprehensive characteristics of groundwater migration and replenishment. The results indicate the following: (i) The hydrogen and oxygen values all fall near the local meteoric water line, indicating that precipitation is the main groundwater recharge source. (ii) The excess deuterium decreased gradually from karst mountain to basin, and karst water and pore water experienced different flow processes. (iii) The structure characteristics of three main runoff channels are described by MT fine processing and inversion techniques. Finally, it is concluded that limestone water moved from the recharge to the discharge area, mixed with the deep dolomite water along the fault under the control of fault F2, and eventually rose to the surface of the unconsolidated sediment blocked by fault F1 to emerge into an ascending spring. Full article

The Jinchuan Ni-Cu sulfide deposit in the Longshoushan terrane is among the world’s largest magmatic sulfide deposits. This study uses magnetotelluric (MT) survey data imaging combined with previous geophysical data to investigate Segment III of the deposit. The image of MT data reveals a significant low-resistivity anomaly ~200 m beneath Segment III, aligning with known ore bodies, and an additional anomaly to the north, indicating further exploration potential. These findings highlight the deep-seated intrusions and their connection to surface mineralization, emphasizing the critical role of ultramafic rock encapsulation and fault-controlled morphology in ore body formation. The newly identified northern anomaly, resembling the Segment III ore bodies, suggests a promising target for future exploration. Integrating MT surveys with other geophysical methods enhances the understanding of subsurface structures and mineralization, providing a robust framework for discovering concealed mineral deposits and improving exploration efficiency. Full article

The electromagnetic method is widely used in mineral exploration, geothermal resource exploration, and deep earth structure detection. To improve the resolution and positioning accuracy of magnetotelluric surveys for targets beneath cover, it is essential to utilize forward modeling. This approach allows for a better understanding of the capabilities and limitations of MT in resolving features of different scales. In this paper, we employ forward modeling using the finite element method to simulate a series of continuous fault zones ranging from 100 m to 400 m in width, with varying lengths and dips. These fault zones represent conductive fluid pathways that could be associated with different scales and depths. The forward modeling provides the necessary data and method testing to assess the effectiveness of MT surveys in identifying and resolving such features. Our findings demonstrate that a station spacing of 400 m is optimal for resolving fault zones of various widths. For narrower faults (approximately 100 m), extending the survey line to 12 km or more significantly improves the deep structural inversion of the bounding faults, while an 8 km survey line suffices for wider faults (400 m). However, the vertical extent of these features is less well constrained, with deeper faults appearing broader and inversion depths being notably shallower than actual depths. These results highlight the need for careful interpretation of inversion anomalies, especially when supplementary data from other geophysical methods are lacking. Misinterpretation can lead to inaccurate resource assessments and exploration potential. Full article

The Qinzhou fold belt, situated at the contact zone between the Yangtze and Cathaysia blocks in South China, was affected by the 1936 Lingshan M6¾ earthquake and the 1958 Lingshan M5¾ earthquake, both of which occurred within the conjugate structure. Understanding the deep seismogenic setting and causal mechanism of the Lingshan conjugate earthquake is of great significance for assessing the seismic disaster risk in the region. In this study, we utilized 237 magnetotelluric datasets and employed three-dimensional electromagnetic inversion to characterize the deep-seated three-dimensional resistivity structure of the Qinzhou fold belt and the Lingshan seismic zone. The results reveal that: (1) The NE-trending faults within the Qinzhou fold belt and adjacent areas are classified as trans-crustal faults. The faults exhibit crust-mantle ductile shear zones in their deeper sections, which are essential in governing regional tectonic deformation and seismic activity; (2) The electrical structure of the Qinzhou fold belt is in line with the tectonic characteristics of a composite orogenic belt, having experienced several phases of tectonic modification. The southeastern region is being influenced by mantle-derived magmatic activities originating from the Leiqiong area over a significant distance; (3) In the Lingshan seismic zone, the NE-trending Fangcheng-Lingshan fault is a trans-crustal fault and the NW-trending Zhaixu fault is an intra-crustal fault. The electrical structure pattern “two low, one high” in the zone has a significant impact on the deep tectonic framework of the area and influences the deformation behavior of shallow faults; and (4) The seismogenic structure of the 1936 Lingshan M6¾ earthquake was the Fangcheng-Lingshan fault. The earthquake’s genesis was influenced by the coupling effect of tectonic stress and deep thermal dynamics. The seismogenic structure of the 1958 Lingshan M5¾ earthquake was the Zhaixu fault. The earthquake’s genesis was influenced by tectonic stress and static stress triggering from the 1936 Lingshan M6¾ earthquake. The conjugate rupture mode in the Lingshan seismic zone is influenced by various factors, including differences in physical properties, rheology of deep materials, and the scale and depth of fault development. Full article

Magnetotelluric (MT) sounding is a geophysical technique widely utilized in mineral resource surveys, where conductivity and magnetic permeability serve as essential physical parameters for forward modeling and inversion. However, the effects of conductive anisotropy and non-zero magnetic susceptibility are usually ignored. In this study, we present a three-dimensional (3D) MT modeling algorithm using Coulomb-gauged electromagnetic potentials, incorporating a mixed nodal and edge-based finite element method capable of simulating MT responses for conductive anisotropic and magnetic anomalies. Subsequently, the algorithm’s accuracy was validated in two steps: first, it was compared with analytical solutions for a 1D magnetic model; then, a comparison was made with previously published numerical results for a 3D generalized conductive anisotropic model. The results of two tests show that the maximum relative error is below 0.5% for both models. Furthermore, representative models were computed to comprehensively analyze the responses of MT. The findings illustrate the relationship between anisotropic parameters and electric fields and emphasize the significance of considering the impact of magnetic susceptibility in magnetite-rich regions. Full article

The marine magnetotelluric (MMT) method is a significant tool extensively utilized in offshore studies, including the understanding of the Earth’s tectonics and hydrocarbon exploration. Conductive anisotropy and non-zero magnetic susceptibility are common phenomena observed in the Earth’s subsurface, and MMT forward modeling is the basis of practical inversion. However, numerical modeling that incorporates both conductive anisotropy and magnetic susceptibility has received limited attention. Moreover, both accuracy and efficiency are crucial in developing a 3D MMT modeling algorithm. Therefore, we developed a multi-level parallel MMT forward modeling algorithm that is capable of simultaneously modeling conductive and magnetic arbitrary anisotropic models using the vector finite element method based on the secondary field formula. The algorithm’s accuracy was validated through comparisons with previously published results for an arbitrary anisotropic model. The results show that the maximum relative error is below 2%, and the speedup reaches an impressive value of 552.41 when running with 2048 cores. Furthermore, the MMT responses of conductive anisotropy and magnetic susceptibility were comprehensively analyzed by several typical models. Our findings highlight the importance of considering magnetic susceptibility in magnetite-rich regions, particularly as the MMT responses may exhibit opposite responses for anomalies with lower resistivity and higher magnetic susceptibility compared with the surrounding rocks. Full article

Magnetotelluric (MT) forward modeling is essential in geophysical exploration, enabling the investigation of the Earth’s subsurface electrical conductivity. Traditional finite difference methods (FDMs) typically use uniform grids, which can be computationally inefficient and fail to accurately capture complex geological structures. This study addresses these challenges by introducing a non-uniform grid-based FDM for MT forward modeling. The proposed method optimizes computational resources by varying grid resolution, offering finer grids in areas with complex geology and coarser grids in more homogeneous regions. We apply this method to both typical synthetic models and a complex fault structure case study, demonstrating its capability to accurately resolve subsurface features while reducing computational costs. The results highlight the method’s effectiveness in capturing fine-scale details that are often missed by uniform grid approaches. The conclusions drawn from this study suggest that the non-uniform grid FDM not only improves the accuracy of MT modeling but also enhances its efficiency, making it a valuable tool for geophysical exploration in challenging environments. Full article

In this study, we describe a deep learning (DL)-based workflow for the three-dimensional (3D) geophysical inversion of magnetotelluric (MT) data. We derived a mathematical connection between a 3D resistivity model and the surface-observed electric/magnetic field response by using a fully connected neural network framework (U-Net). Limited by computer hardware functionality, the resistivity models were generated by using a random walk technique to enlarge the generalization coverage of the neural network model, and 15,000 paired datasets were utilized to train and validate it. Grid search was used to select the optimal configuration parameters. With the optimal model framework from the parameter tuning phase, the metrics showed stable convergence during model training/validation. In the test period, the trained model was applied to predict the resistivity distribution by using both the simulated synthetic and the real MT data from the Mount Meager area, British Columbia. The reliability of the model prediction was verified with noised input data from the synthetic model. The calculated results can be used to reconstruct the position and shape trends of bodies with anomalous resistivity, which verifies the stability and performance of the DL-based 3D inversion algorithm and showcases its potential practical applications. Full article

The East Kunlun Orogenic Belt is an essential part of the Qin-Qikun composite orogenic system, the most crucial orogenic belt in Qinghai Province, and an important gold ore-producing area in China. The Gouli gold field in its eastern section is one of the most important gold fields discovered in the belt in recent years. The Mailong mining area is an important gold mining area in the Gouli ore-concentrated area. The area has experienced frequent and intense magmatic activity, with intrusive rock bodies extensively exposed and intersected by a complex network of fault structures, providing excellent geological conditions for the formation of gold deposits. However, it is difficult to explore due to high altitude, poor transportation, and shallow coverage. This study used an audio magnetotelluric sounding method to track the deep direction and inclination of known mineral belts in the Mailong mining area, and identified mineral exploration targets, providing a basis for mineral exploration. Subsequently, a gold ore body was discovered through drilling verification, achieving a breakthrough in deep mineral exploration. The electromagnetic exploration method works well for exploring structurally altered rock-type gold deposits in plateau desert areas, and combined with the results of this electromagnetic exploration, a metallogenic geological model and genesis process of the Mailong mining area has been constructed. Full article

Successful geophysical exploration projects in the Gucheng–Yaxi area located in Gaochun District, Jiangsu Province, China, have been limited partly due to the complex geological conditions of the area and high artificial noise in data acquired using electrical and electromagnetic methods. In this study, we deployed the new anti-interference spread-spectrum-induced polarization method (SSIP) and the audio-magnetotelluric (AMT) method to detect a copper–polymetallic deposit in the area. Two-dimensional inversion results in the Gucheng–Yaxi area revealed a high chargeability anomalous zone on the SSIP profile that coincided with a zone of moderate resistivity located between two resistor bodies on the AMT profile. A follow-up 1200 m drill hole was established at this high-chargeability, moderate-resistivity zone which encountered polymetallic (copper, lead, zinc, gold, and silver) mineralization at a depth of ≥400 m. Drill hole data analysis showed that mineralization occurred interspaced in the marble rock mass at varying depths. Furthermore, several low-resistivity, weak-chargeability sections were revealed and attributed to Cretaceous sediments and faults. These faults are thought to have played a critical role in the polymetallic mineralization genesis. In summary, this study demonstrated the successful of application of SSIP and AMT in detecting a metallic deposit in an area with high artificial noise. Hence, the geophysical prospection potential of the Gucheng–Yaxi area is great. Full article

The Beishan region is a vital fluorite metallogenic belt in northwest China, characterized by favorable geological conditions for fluorite mineralization. However, being located in the Gobi Desert and affected by shallow cover layers, only a few outcrops can be observed on the surface. Therefore, comprehensive geophysical research is necessary to locate and predict regional metallogenic potential and the spatial distribution of veins beneath the cover. This study conducted a combination of ground magnetic method (GM), induced polarization (IP) surveys, portable gamma-ray (PGR), portable X-ray fluorescence analyses (PXRF), and audio Magnetotelluric (AMT) to conduct comprehensive exploration. The IP and GM effectively identified concealed ore-bearing space distributions and ground PGR- and PXRF-constrained mineralization anomalies, while AMT surveys constructed deep electrical structure models for ore deposits. This approach delineated concealed fluorite deposit locations as well as potential magmatic–hydrothermal migration pathways. Engineering verification confirmed the effectiveness of this method combination. This study established a comprehensive geological–geophysical positioning prediction technique that can serve as a reference for locating and predicting fluorite deposits in shallow-covered areas within the Gobi Desert. Full article

To explore the deep geological structure of the Dongyang area in Fujian, China, gravity data from the area and its surroundings were collected and processed. Additionally, a high-precision magnetic survey was conducted in the Zhongxian region of this area, with subsequent analysis of the magnetic anomalies. Through the integration of regional geological data, a comprehensive analysis was carried out on the characteristics of gravity–magnetic anomalies and deep geological structures in the Dongyang area. The study indicates that the primary portion of the Dongyang area lies southwest of the expansive circular volcanic structure spanning Dehua to Yongtai. Two significant residual gravity anomalies were identified within the region, interpreted as the Xiaoban-Shuangqishan and Dongyang-Lingtouping residual gravity-positive anomalies. In the Zhongxian region, the magnetic field exhibits complexity with notable amplitude variations. Positive anomalies predominate in the western and northern sectors, while localized positive anomalies are prominent in the eastern region. The central area portrays a circular and disordered mix of positive and negative anomalies. Particularly distinctive are the band-shaped and fan-shaped negative anomalies curving from northeast to southeast through the central region. Various positive and negative anomalies of varying strengths, gradients, and orientations overlay both positive and negative magnetic backgrounds in specific locales. Moreover, the Dongyang area showcases well-developed fault structures, primarily oriented in northeast and northwest directions. Leveraging the regional magnetic attributes in conjunction with regional geological data, 39 faults were deduced in the Zhongxian region of the Dongyang area, delineating three promising mineralization zones. Full article

Traditional methods for monitoring the foundation settlement of airport runways predominantly employ equipment such as leveling instruments, total stations, layered settlement instruments, magnetic ring settlement instruments, ground-penetrating radar (GPR), and synthetic aperture radar. These methods suffer from low automation levels, are time-consuming, labor-intensive, and can significantly disrupt airport operations. An alternative electromagnetic detection technique, Controlled Source Audio-Frequency Magnetotellurics (CSAMT), offers deep-depth detection capabilities. However, CSAMT faces significant challenges, particularly in generating high signal-to-noise ratio (SNR) signals in the far-field region (FfR). Traditional CSAMT utilizes grounded horizontal dipoles (GHDs), which radiate symmetric beams. Due to the low directivity of GHDs, only a small fraction of the radiated energy is effectively utilized in FfR observations. Enhancing the SNR in FfR typically requires either reducing the transceiving distance or increasing the transmitting power, both of which introduce substantial complications. This paper proposes an airborne-dangled monopole-antenna symmetric remote-sensing radiation source for airport runway monitoring, which replaces the conventional GHD. The analytical, simulation, and experimental verification results indicate that the energy required by the airborne-dangled symmetric source to generate the same electric field amplitude in the FfR is only one-third of that needed by traditional CSAMT. This results in significant energy savings and reduced emissions, underscoring the advantages of the airborne-dangled monopole-antenna symmetric source in enhancing energy efficiency for CSAMT. The theoretical analysis, simulations, and experimental results consistently verify the validity and efficacy of the proposed airborne-dangled monopole-antenna symmetric remote-sensing radiation source in CSAMT. This innovative approach holds substantial promise for airport runway monitoring, offering a more efficient and less intrusive solution compared to traditional methods. Full article