Search Results (2,013)

There is limited research on the relationship between membrane fouling and microbial metabolites in the nitrogen removal process coupled with membrane bioreactors (MBRs). In this study, we compared anoxic-oxic (AO) and partial nitritation–anammox (PNA), which were selected as representative heterotrophic and autotrophic biological nitrogen removal–coupled MBR processes for their fouling behavior. At the same nitrogen loading rate of 100 mg/L and mixed liquor suspended solids (MLSS) concentration of 4000 mg/L, PNA-MBR exhibited more severe membrane fouling compared to AO-MBR, as evidenced by monitoring changes in transmembrane pressure (TMP). In the autotrophic nitrogen removal process, without added organic carbon, the supernatant of PNA-MBR had higher concentrations of protein, polysaccharides, and low-molecular-weight humic substances, leading to a rapid flux decline. Extracellular polymeric substances (EPS) extracted from suspended sludge and cake sludge in PNA-MBR also contributed to more severe membrane fouling than in AO-MBR. The EPS subfractions of PNA-MBR exhibited looser secondary structures in protein and stronger surface hydrophobicity, particularly in the cake sludge, which contained higher contents of humic substances with lower molecular weights. The higher abundances of Candidatus Brocadia and Chloroflexi in PNA-MBR could lead to the production of more hydrophobic organics and humic substances. Hydrophobic metabolism products as well as anammox bacteria were deposited on the hydrophobic membrane surface and formed serious fouling. Therefore, hydrophilic membrane modification is more urgently needed to mitigate membrane fouling when running PNA–MBR than AO–MBR. Full article

Ultrasonic technology has drawn extensive interests for its great potential in marine antifouling applications. However, its effects on the adhesion behavior of marine fouling organisms on marine structures remain underexplored. This work investigated how ultrasonic treatment impacted the adhesion of Pseudoalteromonas on a gel-like marine epoxy primer. And the process parameters for ultrasonic treatment were optimized using response surface analysis with Design-Expert software 11. The results revealed that ultrasonic treatment disrupted the cellular structure of Pseudoalteromonas, causing the deformation and fragmentation of the cell membrane, leading to bacterial death. Additionally, ultrasonic treatment reduced the particle size and Zeta potential value of Pseudoalteromonas, which disrupted the stability of bacterial suspensions. It also increased the relative surface hydrophobicity of Pseudoalteromonas cells, resulting in a reduction in adhesion to the gel-like marine epoxy primer. This study demonstrated that ultrasonic treatment significantly disturbed the adhesion behavior of microorganisms like Pseudoalteromonas on the gel-like marine epoxy primer, which provided an effective approach for controlling marine biofouling. Full article

The global transition towards a carbon-neutral economy highlights the potential of biomass as a renewable fuel source. However, the sustainability of biomass energy systems is challenged by its complex fouling behaviours during combustion. This study investigates the impact of air staging on mitigating fouling in biomass combustion. By optimising the secondary-to-total air flowrate ratio (Qs/Qt) and the positioning of secondary air, this research investigates the impact of operational and design parameters on fouling deposits in biomass combustion. A fixed-bed combustor was used for the experiments, with hardwood pellets as fuel. This study employed TGA and SEM to analyse the fouling deposit samples’ chemical composition and morphology. First, visible inspection established that the inclination of fouling matter to accumulate on cooled deposition pipes is indeed sensitive to Qs/Qt. The results show that lower Qs/Qt ratios (<0.50) lead to heavier, stickier fouling. Peak temperatures in the fuel bed increase with higher Qs/Qt, enhancing the combustion efficiency and affecting the fouling characteristics. SEM analysis further shows that higher Qs/Qt ratios produce finer, more dispersed fouling particles, whereas lower ratios result in larger, more cohesive particles. These findings provide actionable insights for enhancing the sustainability of biomass energy systems and minimising their environmental impact. Full article

Mitigating the adverse effects of corrosion failure and low-temperature icing on aluminum (Al) alloy materials poses significant research challenges. The facile fabrication of bioinspired superhydrophobic materials offers a promising solution to the issues of corrosion and icing. In this study, we utilized laboratory-collected candle soot (CS), hydrophobic fumed SiO₂, and epoxy resin (EP) to create a HF-SiO₂@CS@EP superhydrophobic coating on Al alloy surfaces using a spray-coating technique. Various characterization techniques, including contact angle meter, high-speed camera, FE-SEM, EDS, FTIR, and XPS, were employed to investigate surface wettability, morphologies, and chemical compositions. Moreover, a 3.5 wt.% NaCl solution was used as a corrosive medium to evaluate the corrosion resistance of the uncoated and coated samples. The results show that the capacitive arc radius, charge transfer resistance, and low-frequency modulus of the coated Al alloy significantly increased, while the corrosion potential (E_corr) shifted positively and the corrosion current (I_corr) decreased by two orders of magnitude, indicating improved corrosion resistance. Additionally, an investigation of ice formation on the coated Al alloy at −10 °C revealed that the freezing time was 4.75 times longer and the ice adhesion strength was one-fifth of the uncoated Al alloy substrate, demonstrating superior delayed icing and reduced ice adhesion strength performance. Full article

Urban wastewater (UWW) and landfill leachate (LL) co-treatment using membrane bioreactors (MBRs) is a valuable method for managing LL in cities. Coagulants can enhance the filterability of mixed liquor (ML), but the assessment of fouling is still needed. This research aimed to investigate the effects of co-treating synthetic wastewater (SWW) and real LL on an MBR, as well as the impact of adding poly-aluminum chloride (PACl) and Tanfloc SG. Cell-ultrafiltration experiments were conducted with four different feeds: synthetic wastewater, co-treatment with LL (20% v/v), and co-treatment with the addition of 30 mg L⁻¹ coagulants (either PACl or Tanfloc). Co-treatment aggravated flux loss and reduced the recovery rate; however, Tanfloc and PACl improved recovery after cleaning (by 11% and 9%, respectively). Co-treatment also increased cake and irrecoverable/irremovable inorganic resistances, though coagulants reduced the latter, despite a lower fit of the Hermia models during the first hour of filtration. Co-treatment reduced the removal efficiencies of almost all pollutants analyzed, with the most significant impacts observed on the organic fraction. Coagulants, particularly Tanfloc, enhanced overall performance by improving flux recovery and reducing irreversibility, thus benefiting membrane lifespan. In conclusion, Tanfloc addition yielded the best results in terms of filterability and pollutant removal. Full article

Inspired by the “Lotus Leaf Effect” in nature, the phenomenon of superhydrophobia has attracted tremendous attention from researchers. Due to their special surface wettability, the superhydrophobic surfaces have been found to have broad potential applications in the fields of marine engineering, medical equipment, and aerospace. Based on the introduction of the principles of wettability, the advantages and disadvantages of various preparation methods for superhydrophobic surfaces were studied and summarized in this paper. The research progress on superhydrophobic surfaces in marine engineering applications was analyzed according to their self-cleaning, anti-corrosion, heat transfer, drag reduction, anti-fouling, ant-icing, and oil/water separation properties. Finally, to advance practical applications, the current challenges associated with superhydrophobic surfaces are highlighted, and potential future development directions are proposed. Full article

The commercial ultrafiltration tubular polyvinylidene fluoride (PVDF) (100 and 200 kDa) and polyethersulfone (PES) (4 kDa) membranes were applied for filtration of car wash wastewater. Intensive fouling was noticed, which caused an over 50% flux reduction during 3–5 h of the filtration process. This phenomenon was reduced by washing the membranes with an alkaline cleaning agent (pH = 11.5), which is used in car washes to remove insects. The filtration/membrane washing cycle was repeated many times to achieve stable operation of the membrane modules. It has been found that cyclic repeated washing did not deteriorate the performance of the membranes. Despite frequent cleaning of the membranes (every 5–7 h), irreversible fouling occurred, resulting in a 20% reduction in the initial permeate flux. However, the formation of a filter cake definitely improved the separation degree and, for the 200 kDa membranes, separation of the wastewater components was obtained as it was for the 4 kDa membranes, while, at the same time, the permeate flux was 5 times higher. Full article

Background: Acrylamide polymers with zwitterionic carboxybetaine (CB) side groups have attracted attention as stealth polymers that do not induce antibodies when conjugated to proteins. However, they induce antibodies when modified onto liposomes. We hypothesized that antibodies are produced against polymer backbones rather than CB side groups. Objectives: In this study, we designed and synthesized a polymer employing CB in its main chain, poly(N-acetic acid-N-methyl-propyleneimine) (PAMPI), and evaluated the blood retention of PAMPI-modified liposomes in mice. Results: The non-fouling nature of PAMPI-modified liposomes estimated from serum protein adsorption was found to be not inferior to PCB- and PEG-modified liposomes. However, to our surprise, the PAMPI-modified liposomes showed an instantaneous clearance less than 1 h post-injection, comparable to the naked liposomes. Conclusions: The extent of the blood retention of polymer-modified liposomes cannot be predicted by their susceptibility to serum protein adsorption and semi-flexible conformation. Full article

Membrane technologies play a pivotal role in various industrial sectors, including food processing. Membranes act as barriers, selectively allowing the passage of one or other types of species. The separation processes that involve them offer advantages such as continuity, energy efficiency, compactness of devices, operational simplicity, and minimal consumption of chemical reagents. The efficiency of membrane separation depends on various factors, such as morphology, composition, and process parameters. Fouling, a significant limitation in membrane processes, leads to a decline in performance over time. Anti-fouling strategies involve adjustments to process parameters or direct modifications to the membrane, aiming to enhance efficiency. Recent research has focused on mitigating fouling, particularly in the food industry, where complex organic streams pose challenges. Membrane processes address consumer demands for natural and healthy products, contributing to new formulations with antioxidant properties. These trends align with environmental concerns, emphasizing sustainable practices. Despite numerous works on membrane modification, a research gap exists, especially with regard to the application of modified membranes in the food industry. This review aims to systematize information on modified membranes, providing insights into their practical application. This comprehensive overview covers membrane modification methods, fouling mechanisms, and distinct applications in the food sector. This study highlights the potential of modified membranes for specific tasks in the food industry and encourages further research in this promising field. Full article

The objective of this study was to investigate the effect of pH (6.1, 6.3, 6.5, and 6.7) on heat-induced changes in concentrated skim milk as related to fouling in heat exchangers. Skim milk (30%, w/w, total solids) was recirculated in a laboratory-scale fouling rig at an initial target temperature of 85 °C for 90 min to simulate thermal processing and preheating of evaporated liquid concentrate feeds in dairy processing. This study investigated key changes in relevant physicochemical properties, such as viscosity, particle size, and sedimentation, as major contributors to fouling at lower pHs (6.1 and 6.3). Additionally, protein aggregation and calcium phosphate precipitation were identified as significant contributors to fouling deposits. Possible strategies to mitigate fouling were determined, including optimizing pH and adjusting heat treatment parameters to minimize protein denaturation and mineral deposition. The findings indicate that carefully controlling pH and processing parameters can greatly enhance the efficiency of milk concentration by evaporation and tailor finished product quality. Moreover, this study showed that monitoring of CIP solutions for protein content and turbidity provides valuable information on the intensity of fouling and the efficiency of cleaning. Full article

Immobilizing different enzymes on membranes can result in biocatalytic active membranes with a self-cleaning capacity toward a complex mixture of foulants. The membrane modification can reduce fouling and enhance filtration performance. Protease, lipase, and amylase were immobilized on poly(vinylidene fluoride) (PVDF) microfiltration membranes using a polydopamine coating in a one-step method. The concentrations of polydopamine precursor and enzymes were optimized during the immobilization. The higher hydrolytic activities were obtained using 0.2 mg/mL of dopamine hydrochloride and 4 mg/mL of enzymes: 0.90 mg_starch/min·cm² for amylase, 10.16 nmol_tyrosine/min·cm² for protease, and 20.48 µmol_{p-nitrophenol}/min·cm² for lipase. Filtration tests using a protein, lipid, and carbohydrate mixture showed that the modified membrane retained 41%, 29%, and 28% of its initial water permeance (1808 ± 39 L/m²·h·bar) after three consecutive filtration cycles, respectively. In contrast, the pristine membrane (initial water permeance of 2016 ± 40 L/m²·h·bar) retained only 23%, 12%, and 8%. Filtrations of milk powder solution were also performed to simulate dairy industry wastewater: the modified membrane maintained 28%, 26%, and 26% of its initial water permeance after three consecutive filtration cycles, respectively, and the pristine membrane retained 34%, 21%, and 7%. The modified membrane showed increased fouling resistance against a mixture of foulants and presented a similar water permeance after three cycles of simulated dairy wastewater filtration. Membrane fouling is reduced by the immobilized enzymes through two mechanisms: increased membrane hydrophilicity (evidenced by the reduced water contact angle after modification) and the enzymatic hydrolysis of foulants as they accumulate on the membrane surface. Full article

In the chemical and process industries, different techniques are implemented to enable the separation of azeotropic mixtures. These separation methods are broadly classified as azeotropic distillation procedures, which employ the use of entrainers, and membrane-based processes, which mainly use semi-permeable membrane materials. This paper seeks to examine the current trends employed in the separation procedures for azeotropic mixtures in industry, particularly the techniques and methods applied in the actual processes. Additionally, this paper also outlines the common issues encountered in the current setups for the separation of azeotropic mixtures. Several studies show that in comparison to conventional separation techniques, the application of alternative distillation methods and advanced membrane-based techniques for the separation of azeotropic mixtures results in better separation efficiency and reduced energy consumption while also maintaining the cost-effectiveness of the overall process. In addition to this, advancements in the available techniques for separation would also improve the viability and ensure the long-term sustainability of the proposed developments, addressing the current gaps in knowledge while ensuring that existing challenges in the procedures, like membrane fouling and limited scalability, are properly addressed. Furthermore, this paper also highlights the research outlook of the processes involved in the separation of azeotropic mixtures. Full article

The performance of heat pump systems for heating and cooling heavily relies on the thermal conditions of their reservoirs. This study introduces a novel thermal reservoir, detailing a 2017 project where the Municipality of Stavanger installed a heat exchanger system on the wall of a main wastewater tunnel beneath the city center. It provides a comprehensive account of the system’s design, installation, and performance, and presents an Artificial Neural Network (ANN) model that predicts heat pump capacity, electricity consumption, and outlet temperature across seasonal variations in wastewater temperatures. By integrating domain knowledge with the ANN, this study demonstrates the model’s capability to detect anomalies in heat pump operations effectively. The network also confirms the consistent performance of the heat exchangers from 2020 to 2024, indicating minimal fouling impacts. This study establishes wastewater heat exchangers as a safe, effective, and virtually maintenance-free solution for heat extraction and rejection. Full article

This study examined the impact of adding bentonite clay (concentration of 1.5 to 10 g/L) to a pilot-scale aerobic ceramic membrane bioreactor (AeCMBR) for treating pharmaceutical wastewater (PhWW). The hydraulic retention time (HRT) was maintained at 24 h; the dissolved oxygen was between 2 mg/L (on) and 4 mg/L (off) throughout operation. Organic and nitrogen pollution removal rates and heavy metal (Cu, Ni, Pb, Zn) reduction rates were assessed. The chemical oxygen demand (COD) removal efficiency exceeded 82%. Adsorption improved ammonia (NH4+) removal to 78%; the addition of 5 g of bentonite resulted in a 38% improvement compared with the process without bentonite. The average nitrate concentration decreased from 169.69 mg/L to 43.72 mg/L. The average removal efficiencies for Cu, Ni, Pb and Zn were 86%, 68.52%, 46.90% and 56.76%, respectively. Bentonite at 5 g/L significantly reduced membrane fouling. The cost–benefit analysis enabled us to predict that the process will meet the multiple objectives of durability, treatment performance and economic viability. The combination of an AeCMBR and bentonite adsorption has proven to be a valuable solution for treating highly polluted wastewater. Full article

Membrane fouling, a major challenge in desalination, is addressed in this study by investigating three different chemical cleaning protocols (A, B, and C) targeting fouled reverse osmosis (RO) membranes and microbial community composition. Cleaning protocols A and B involve different chemical treatments selected based on preliminary tests and literature review, while protocol C follows the manufacturer’s standard recommendation. Membrane morphology, foulant composition, and microbial community variability in fouled, virgin, and cleaned membranes are studied. Effective biofilm removal is observed across all protocols using scanning electron microscopy (SEM), while spectroscopic techniques highlight interactions between foulants and membranes. Importantly, a critical gap in understanding how cleaning strategies influence microbial communities on membranes is addressed. Shifts in dominant bacterial phyla (Proteobacteria, Firmicutes, and Actinobacteria) after cleaning are identified through 16S rRNA amplicon sequencing. Cleaning A showed the best results in reducing microbial counts and restoring composition similar to virgin membranes. Additionally, chemical treatment increased dominance of resistant genera such as Staphylococcus, Bacillus, Citrobacter, and Burkholderia. This study emphasizes the necessity for tailored fouling cleaning strategies for RO membranes, with Cleaning A is a promising solution, paving the way for enhanced water purification technologies. Full article