Search Results (7,569)

This work explores the polymerization of sodium 4-styrenesulfonate (NaSS) inside filter paper using dielectric barrier discharge (DBD) plasma and its application in the environmental field. The plasma-based technique, performed under mild conditions, solves common problems associated with conventional polymerization inside porous materials. The polymerization process was monitored using Fourier-transform infrared (FTIR) spectroscopy, which confirmed the consumption of double bonds, particularly in NaSS samples containing the optimal concentration of crosslinker divinyl benzene (DVB) (0.25% wt). Our work demonstrates the effectiveness and promise of DBD plasma as a substitute polymerization approach, especially for those in porous materials. Full article

Metasurfaces composed of silicon nanogap units have a variety of optical resonances, including bound states in the continuum (BIC). We show comprehensive numerical results on metasurfaces of Si-nanogap units, analyze the optical resonances, and clarify optically prominent resonances as well as symmetry-forbidding resonances that are the BIC, based on the numerical analyses of optical spectra and resonant electromagnetic field distributions. Introducing asymmetry in the unit cell, the BIC become optically allowed, being identified as magnetic dipole, electric quadrupole, and magnetic quadrupole resonances. Moreover, the optical resonances are examined in terms of refractive index sensing performance. A pair of the resonances associated with electric field localization at the nanogap was found to be sensitive to the refractive index in contact with the metasurfaces. Consequently, the gap mode resonances are shown to be suitable for a wide range of refractive index sensing over 1.0–2.0. Full article

The complex dielectric permittivity, ε (f, H) = ε′ (f, H) − i ε″ (f, H), in the microwave frequency range f, of (0.1–3) GHz and polarizing field values H, in the range of (0–135) kA/m, was measured for a kerosene-based ferrofluid with magnetite particles. A relaxation process attributed to interfacial type relaxation was highlighted, determining for the first time in the microwave field, the activation energy of the dielectric relaxation process in the presence of the magnetic field, E_A(H), in relation to the activation energy in zero field, E_A(H = 0). Based on the complex permittivity measurements and the Claussius–Mossotti equation, the dependencies on frequency (f), and magnetic field (H), of the polarizability (α) and electrical conductivity (σ), were determined. From the dependence of α(f,H), the electric dipolar moment, p, of the particles in the ferrofluid, was determined. The conductivity spectrum, σ(f,H), was found to be in agreement with Jonscher’s universal law and the electrical conduction mechanism in the ferrofluid was explained using both Mott’s VRH (variable range hopping) model and CBH (correlated barrier hopping) model. Based on these models and conductivity measurements, the hopping distance, R_h, of the charge carriers and the maximum barrier height, W_m, for the investigated ferrofluid was determined for the first time in the microwave field. Knowledge of these electrical properties of the ferrofluid in the microwave field is useful for explaining the mechanisms of polarization and control of electrical conductivity with an external magnetic field, in order to use ferrofluids in various technological applications in microwave field. Full article

In this study, Ni/Ba co-doped NaNbO₃ ceramics (NBNNO_x) were synthesized using a solid-state method to explore the effects of Ni²⁺ and Ba²⁺ ion substitution on the structural, optical, and dielectric properties of NaNbO₃. X-ray diffraction (XRD) confirmed that the ceramics retained an orthorhombic structure, with crystallinity improving as the doping content (x) increased. Significant lattice distortions induced by the Ni/Ba co-doping were observed, which were essential for preserving the perovskite structure. Raman spectroscopy revealed local structural distortions, influencing optical properties and promoting relaxor behavior. Diffuse reflectance measurements revealed a significant decrease in band gap energy from 3.34 eV for undoped NaNbO₃ to 1.08 eV at x = 0.15, highlighting the impact of co-doping on band gap tunability. Dielectric measurements indicated relaxor-like behavior at room temperature for x = 0.15, characterized by frequency-dependent anomalies in permittivity and dielectric loss, likely due to ionic disorder and structural distortions. These findings demonstrate the potential of Ni/Ba co-doped NaNbO₃ ceramics for lead-free perovskite solar cells and other functional devices, where tunable optical and dielectric properties are highly desirable. Full article

To investigate the relationship between the lignin removal rate change of wood and its dielectric properties, this study employed Mongolian Scotch Pine and Paulownia as the test materials. The acidic sodium chlorite method was used to delignify the treated material, and the lignin removal rate was determined at a specified reaction time interval to ascertain the dielectric constant and the tangent of the dielectric loss angle. The findings revealed that: As the delignification process progresses, the lignin content declines, accompanied by a reduction in the dielectric constant at elevated frequencies. This decline reaches a plateau near 10 MHz. The results demonstrated that the dielectric constant of the samples decreased with an increase in frequency and exhibited a stabilizing effect near 10 MHz. However, the dielectric constant of delignified wood was significantly higher than that of untreated wood. Additionally, the dielectric constant exhibited a linear relationship with the increase in lignin removal rate, while the tangent of the dielectric loss angle demonstrated a tendency to increase and then decrease. An investigation into the dielectric properties of delignified wood can yield valuable data and a theoretical foundation for the development of wood-based dielectric materials. Full article

Technologies based on digital microfluidics (DMF) have made significant advancements in the automated manipulation of microscale liquids and complex multistep processes. Due to their numerous benefits, such as automation, speed, cost-effectiveness, and minimal sample volume requirements, these systems are particularly well suited for immunoassays. In this review, an overview is provided of diverse DMF manipulation platforms and their applications in immunological analysis. Initially, droplet-driven DMF platforms based on electrowetting on dielectric (EWOD), magnetic manipulation, surface acoustic wave (SAW), and other related technologies are briefly introduced. The preparation of DMF is then described, including material selection, fabrication techniques and droplet generation. Subsequently, a comprehensive account of advancements in the integration of DMF with various immunoassay techniques is offered, encompassing colorimetric, direct chemiluminescence, enzymatic chemiluminescence, electrosensory, and other immunoassays. Ultimately, the potential challenges and future perspectives in this burgeoning field are delved into. Full article

This study examines the electromagnetic properties of a composite material composed of iron pyrite (FeS₂) and epoxy resin, mixed in a 3:2 weight ratio to create a 10 cm³ cube. The research analyzes transmission and reflection coefficients and band gap parameters to determine its viability as an antenna substrate for electromagnetic wave applications. The composite displays a tunable band gap of 1.3 eV, enabling selective absorption and emission of electromagnetic radiation. The transmission coefficient achieved 90% throughout a frequency range of 1 GHz to 15 GHz, whilst the reflection coefficient was measured at 10%, significantly reducing reflecting losses. The epoxy resin binder was essential for preserving structural integrity and augmenting the dielectric characteristics of the composite, thereby raising transmission efficiency. UV-Vis spectroscopy showed an absorption value of 0.875% at the band gap, indicating efficient interaction with UV energy. The S21 transmission coefficient ranged from −10 dB to −80 dB, with a maximum of −40 dB at 6 GHz, indicating strong energy transfer capability for antenna applications. The S21 values exhibited negligible signal attenuation between 2 GHz and 7 GHz, indicating the material’s exceptional suitability for antenna substrates necessitating dependable transmission. The S11 reflection coefficient varied from −5 dB to −55 dB, with substantial decreases between 4 GHz and 14 GHz, when reflection decreased to −45 dB, signifying little signal reflection at essential frequencies. The results underscore the composite’s appropriateness for applications requiring high transmission efficiency, little reflection, and effective engagement with electromagnetic waves, especially as an antenna substrate. Measurements were performed using a vector network analyzer (VNA) to obtain the S11 and S21 characteristics, underscoring the material’s potential in sophisticated electromagnetic applications. Full article

The optical properties of MoS₂ and WS₂ monolayers are significantly influenced by fabrication methods, especially with respect to the behavior of excitons at the K−point of the Brillouin zone. Using spectroscopic ellipsometry, we obtain the complex dielectric functions of monolayers of these materials from cryogenic to room temperatures over the energy range 1.5 to 6.0 eV. The excitonic structure of each sample is analyzed meticulously by fitting the data to a standard analytical function to extract the energy positions of the excitons at each temperature. At low temperatures, excitonic structures are blue-shifted and sharpened due to the reduction in phonon noise and lattice distance. The excitons of monolayers fabricated by MOCVD separate into sub-structures at low temperatures, while monolayers grown by LPCVD and APCVD remain a single peak. The origin of these peaks as charged or neutral excitons follows from their temperature dependences. Full article

We propose a new type of flexible transistor based on carbon-nanotube (CNT) composite thread (CNTCT), i.e., a thread transistor, with ionic gel. In our previous study, we demonstrated that transistor operation was possible by combining metallic and semiconducting CNTCTs as gate and channel with an insulating material. However, its performance was not sufficient. Therefore, we here aim to improve it. For this, we tried to apply ionic gel as a dielectric layer to it. With this, the transistor was expected to be an electric-double-layer transistor. The transistor performance was improved, and the on/off ratio of the transistor increased by more than 4. This is a large value compared to our previous work. In addition, we not only evaluated the performance of the transistors, but also investigated whether they could be used as logic circuits. It was confirmed that the logic circuit composed of the thread transistor also operated correctly and stably for a long period of time. It was also confirmed that the output changed in response to weak external forces. These results indicate that it is a flexible transistor that can be used in a wide range of applications such as logic circuits and sensors. Full article

With the increasing demand for effective electromagnetic wave (EMW) absorbers due to the proliferation of electronic devices and 5G communication systems, traditional wave-absorbing materials can no longer meet the current requirements. Thus, this research introduces a three-dimensional (3D) composite material consisting of PMMA@Mxene@Co₃O₄ microspheres, prepared through in situ self-assembly and hydrothermal growth. The strong electrical conductivity of Mxene, combined with the magnetic loss of Co₃O₄, ensures enhanced dielectric–magnetic synergy, leading to excellent EMW absorption. The study investigates the influence of varying Co₃O₄ content on the electromagnetic properties of the composite. Experimental results show that the optimal sample, with a thickness of 2.5 mm, achieves a minimum reflection loss (RL_min) of −52.88 dB at 6.88 GHz and an effective absorption bandwidth (EAB) of 5.28 GHz. This work highlights the potential of 3D PMMA@Mxene@Co₃O₄ composites as high-performance microwave absorbers, providing a promising solution to EMW pollution. The findings offer valuable insights into material design strategies, demonstrate a promising pathway for developing lightweight, high-performance EMW absorbing materials by optimizing impedance matching and utilizing advanced microstructure design techniques. Full article

We have collected theoretical arguments supporting the functional role of nano-metallic coatings of solar cells, which enhance solar cell efficiency via by plasmon-strengthening the absorption of sun-light photons and reducing the binding energy of photoexcitons. The quantum character of the plasmonic effect related to the absorption of photons (called the optical plasmonic effect) is described in terms of the Fermi golden rule for the quantum transitions of semiconductor-band electrons induced by plasmons from a nano-metallic coating. The plasmonic effect related to the lowering of the exciton binding energy (called the electrical plasmonic effect) is of particular significance for metalized perovskite solar cells and is also characterized in quantum mechanics terms. The coupling between plasmons in nanoparticles from a coating with band electrons in a semiconductor substrate significantly modifies material properties (dielectric functions) both of the particles and the semiconductor, beyond the ability of the classical electrodynamics to describe. Full article

Generally, various technologies, including waveguide below cutoff (WBC), gasket sealing, and bonding, are employed in metallic enclosures to achieve the high electromagnetic shielding performance required for EMP protection and EMC countermeasures in shielding structures or facilities. While the shielding structure or facility is properly constructed and maintained according to design specifications, its electromagnetic shielding performance can remain at the required level, effectively protecting internal electrical and electronic equipment from external electromagnetic interference. However, unintended apertures often occur during the construction or maintenance of shielding facilities, compromising their shielding performance. Therefore, it is crucial to develop technologies that prevent shielding effectiveness degradation caused by both intentional and unintentional apertures. This paper proposes a structure incorporating a composite absorber (made of dielectric and magnetic absorber) within a double metal panel of enclosure featuring an aperture, aimed at maintaining and improving the facility’s shielding performance. The effectiveness of the proposed structure was validated through numerical simulation. Full article

This paper introduces a novel approach for reconstructing microwave imaging by combining the Whale Optimization Algorithm (WOA) with deep learning techniques. In it, electromagnetic waves are used to illuminate inhomogeneous dielectric objects in free space, and the scattered field is recorded. Due to the highly nonlinear nature of microwave imaging, the WOA is first employed to calculate an initial guess from the measured scattered field of dielectric objects. This step significantly reduces the training complexity for machine learning. Subsequently, the initial guess provided by the WOA is fed into a U-Net to accurately reconstruct the microwave image. Numerical simulation results indicate that the combination of the WOA and machine learning outperforms traditional methods under varying noise levels, enhancing the precision and effectiveness of the reconstruction process. In detail, the RMSE can be reduced 4–10% for dielectric constant distribution from 1 to 2.5 and SSIM can be increased about 30% for most cases. Full article

The pyroelectric nanogenerator (PyNG) has gained increasing attention due to its capability of converting ambient or waste thermal energy into electrical energy. In recent years, nanocomposite films of poly(vinylidene fluoride-co-trifluoro ethylene) (P(VDF-TrFE)) and nanofillers such as reduced graphene oxide (rGO) have been employed due to their high flexibility, good dielectric properties, and high charge mobility for the application of wearable devices. This work investigated the effect of rGO reduction on pyroelectric nanogenerator performance. To prepare rGO, GO was reduced with different reducing agents at various conditions. The resulting rGO samples were characterized by XPS, FT-IR, XRD, and electrical conductivity measurements to obtain quantitative and qualitative information on the change in surface functionalities. Molecularly thin nanocomposite films of P(VDF-TrFE)/rGO were deposited on an ITO-glass substrate by the Langmuir–Schaefer (LS) technique. A PyNG sandwich-like structure was fabricated by arranging the thin films facing each other, and it was subjected to the pyroelectric current test. For various PyNGs of the thin films containing rGO prepared by different methods, the average pyroelectric peak-to-peak current (APC) and the pyroelectric coefficient (p) values were measured. It was found that a more reduced rGO resulted in higher electrical conductivity, and the thin films containing rGO of higher conductivity yielded higher APC and p values and, thus, better energy-harvesting performance. However, the thin films having rGO of too high conductivity produced slightly reduced performance. The Maxwell–Wagner effect in the two-phase system successfully explained these optimization results. In addition, the APC and p values for the thin film with the best performance increased with increasing temperature range. The current PyNG’s performance with an energy density of 3.85 mW/cm² and a p value of 334 μC/(m²∙K) for ΔT = 20 °C was found to be superior to that reported in other studies in the literature. Since the present PyNG showed excellent performance, it is expected to be promising for the application to microelectronics including wearable devices. Full article

In this article, the authors developed a novel method for the moisture mapping of the soil surface of agrophytocenosis using a neural network based on synchronized radar and multispectral optoelectronic data from Sentinel-1,2. The significance of this research lies in its potential to enhance precision farming practices, which are increasingly vital in addressing global agricultural challenges such as water scarcity and the need for sustainable resource management. To verify the developed method, data from two experimental plots were utilized. These plots were located on irrigated soybean crops, with the first plot situated on the right bank (plot No. 1) and the second on the left bank (plot No. 2) of the lower Volga River. Two experimental soil moisture geodatasets were created through measurements and geo-referencing points using the gravimetric method (for plot No. 1) and the proximal sensing method (for plot No. 2) employing the Soil Moisture Sensor ML3-KIT (THETAKIT, Delta). The soil moisture retrieval algorithm was based on the use of a neural network to predict the reflection coefficient of an electro-magnetic wave from the soil surface, followed by inversion into soil moisture using a dielectric model that takes into account the soil texture. The input parameter of the neural network was the ratio of the microwave radar vegetation index (calculated based on Sentinel-1 data) to the index (calculated based on the data of multispectral optoelectronic channels 8 and 11 of Sentinel-2). The retrieved soil moisture values were compared with in situ measurements, showing a determination coefficient of 0.44–0.65 and a standard deviation of 2.4–4.2% for plot No. 1 and similar metrics for plot No. 2. The conducted research laid the groundwork for developing a new technology for remote sensing of soil moisture content in agrophytocenosis, serving as a crucial component of precision farming systems and agroecology. The integration of this technology promotes sustainable agricultural practices by minimizing water consumption while maximizing crop productivity. This aligns with broader environmental goals of conserving natural resources and reducing agricultural runoff. On a larger scale, data derived from such studies can inform policy decisions related to water resource management, guiding regulations that promote efficient water use in agriculture. Full article