Search Results (3,637)

A simple and reliable methodology for the detection of paralytic shellfish toxins (PSTs) in bivalve tissues using potentiometric chemical sensors was developed. Five methods of PST extraction from mussel and oyster tissues were evaluated, including the AOAC-recommended method, which served as the reference. The main objective was to minimize the matrix effect of the extracts on the sensors’ responses and ensure efficient toxin recovery. Extraction procedures using acetic acid with heating and water yielded the highest responses from the potentiometric chemical sensors to PSTs. The highest recovery of PSTs from bivalve tissues was achieved with extraction using acetic acid and heating. Further extract purification, which is indispensable for liquid chromatography with fluorometric detection (LC-FLD) analysis, was found to be unnecessary for analysis with chemical sensors. While water extraction can also be used as a rapid and simple PST extraction method, the lower recoveries should be considered when interpreting the results. Further research is needed to identify the compounds remaining in the extracts that cause a decrease in sensor responses and to develop procedures for their elimination. Full article

Copper oxide nanoparticles (CuO-NPs) are widely used for their catalytic properties, conductive capacity, and innovations in the fields of superconductors, alloys, and solar energy sensors. To better understand the impact of water chemistry on the stability of CuO nanoparticles, a series of measurements were carried out on nanoparticles suspended in pure water, natural water, and water enriched with natural organic matter fulvic acid (FA). ICP-MS characterization in single-particle mode (SP-ICP-MS) was performed to determine the stability or transformation of nanoparticles in contrasting water conditions. We first observed that particle sedimentation was very fast in pure Milli-Q water. The addition of FA favored the dissolution of CuO-NPs with an increase in the dissolved copper concentration, for both Milli-Q water and natural water. The presence of FA also reduced the size of CuO-NPs (i.e., less aggregation) measured in natural water. By comparing signals of single particles, FA decreased nanoparticle numbers as well, confirming the increase in dissolution of CuO-NPs over time. The transformation products of CuO-NPs are important in the ecological context since the uptake and toxicity of parent nanoparticles differ from those of the chemical species in solution. Further considerations are needed on the fate of released NPs to better assess their exposure pathways to aquatic organisms and potential environmental risks. Full article

Multi-ion-imprinted polymers (MIIPs) are materials with a wide range of applications mainly focused on environmental recovery, mining, technology, sensors, etc. MIIPs can incorporate ions such as heavy metals, transition metals, rare earth elements, radionuclides, and other types of ions. The chemical structures of MIIPs can be designed for different purposes and with certain morphologies, such as gels, crystals, or powders, and the surface area and porosity are also considered. All these properties provide the material with several desirable characteristics, like high selectivity, high specificity, adequate efficiency, good stability, the possibility of reusability, and strategy technology adaptation. In this review, we show the multitude of challenges of multi-ion imprinted polymer chemical synthesis based on the different and interesting methods reported previously. Full article

Conducting polymers used in chemical sensors are attractive because of their ability to confer reversible properties controlled by the doping/de-doping process. Polyaniline (PANI) is one of the most prominent materials used due to its ease of synthesis, tailored properties, and higher stability. Here, PANI thin films deposited by the drop-casting method on fluorine-doped tin oxide (FTO) substrates were used in electrochemical and optical sensors for pH measurement. The response of the devices was correlated with the deposition parameters; namely, the volume of deposition solution dropped on the substrate and the concentration of the solution, which was determined by the weight ratio of polymer to solvent. The characterisation of the samples aimed to determine the structure–property relationship of the films and showed that the chemical properties, oxidation states, and protonation level are similar for all samples, as concluded from the cyclic voltammetry and UV–VIS spectroscopic analysis. The sensing performance of the PANI film is correlated with its relative physical properties, thickness, and surface roughness. The highest electrochemical sensitivity obtained was 127.3 ± 6.2 mV/pH, twice the Nernst limit—the highest pH sensitivity reported to our knowledge—from the thicker and rougher sample. The highest optical sensitivity, 0.45 ± 0.05 1/pH, was obtained from a less rough sample, which is desirable as it reduces light scattering and sample oxidation. The results presented demonstrate the importance of understanding the structure–property relationship of materials for optimised sensors and their potential applications where high-sensitivity pH measurement is required. Full article

Fluorescent materials for sensing have gained attention for the visual detection of different substances as metals and pesticides for environmental monitoring. This work presents fluorescent nanocomposites in solution, film, and paper obtained without capping and stabilizing agents, coming from quantum dots of cadmium sulfide (CdS QDs) and anionic–cationic polymer matrices. Fluorescent films were formed by casting and fluorescent paper by impregnation from the solutions. The optical properties of CdS QDs in solution showed absorption between 418 and 430 nm and a maximum emission at 460 nm. TEM analysis evidenced particle size between 3 and 6 nm and diffraction patterns characteristic of CdS nanocrystals. Infrared spectra evidenced changes in the wavenumber in the fluorescent films. The band gap values (2.95–2.82 eV) suggested an application for visible transmitting film. Fluorescent solutions by UV-vis and fluorescence evidenced a chemical interaction with glyphosate standard between 1 and 100 µg/mL concentrations. The analysis of red, green, and blue color codes (RGB) evidenced a color response of the fluorescent paper at 10 and 100 µg/mL, but the fluorescent films did not show change. Nanocomposites of chitosan and pectin, in solution and on paper, exhibited a behavior “turn-on” sensor, while carboxymethylcellulose had a “turn-off” sensor. This methodology presents three fluorescent materials with potential applications in visual sensing. Full article

A minimally invasive needle refractometer is presented for sugar content measurements within produce. A passive sampling cap structure was developed that improves the reliability of the device by avoiding interfering back reflections from the flesh of the produce. It is explained that factory calibration may not be needed for this type of refractometer, potentially reducing production costs. Also demonstrated is an iterative method to correct for temperature variations without the need for an integrated model for how the refractive index changes with temperature for different levels of sugar concentration. The sensor showed a typical standard deviation of 0.4 °Bx for a 10-s-long measurement and was validated against a prism refractometer, showing an average offset of (0.0±0.1) °Bx. In addition, the potential for using the device to investigate sugar distributions within a single fruit sample is demonstrated. Full article

Dissolved gas analysis (DGA) is a vital method for the online detection of transformer operation state. The adsorption performance of a SnP₃ monolayer modified by transition metal Cr regarding six characteristic gases (CO, C₂H₄, C₂H₂, CH₄, H₂, C₂H₆) dissolved in oil was studied. The study reveals the relevant adsorption and gas-sensing response mechanisms through calculations of the adsorption energy, density of states, differential charge density, energy gap, and recovery time. The results display a considerable increase in the adsorption effect of the Cr-SnP₃ monolayer on six gases. The CO, C₂H₂, and C₂H₄ gases lead to chemical adsorption, and the CH₄, H₂, and C₂H₆ gases lead to physical adsorption. Combined with the recovery time, the Cr-SnP₃ monolayer has a strong adsorption effect on CO and C₂H₂ gases at normal temperatures and even high temperatures, and the adsorption is stable. C₂H₄ gas can be rapidly desorbed from the Cr-SnP₃ monolayer at 398 K. Therefore, the Cr-SnP₃ monolayer can be expected to serve as a CO and C₂H₂ gas adsorbent and a resistive gas sensor for C₂H₄ gas. This research offers a theoretical foundation for the development of the Cr-SnP₃ monolayer in gas-sensitive materials. Full article

Hydrogels, known for their unique ability to retain large amounts of water, have emerged as pivotal materials in both tissue engineering and biosensing applications. This review provides an updated and comprehensive examination of cutting-edge hydrogel technologies and their multifaceted roles in these fields. Initially, the chemical composition and intrinsic properties of both natural and synthetic hydrogels are discussed, highlighting their biocompatibility and biodegradability. The manuscript then probes into innovative scaffold designs and fabrication techniques such as 3D printing, electrospinning, and self-assembly methods, emphasizing their applications in regenerating bone, cartilage, skin, and neural tissues. In the realm of biosensing, hydrogels’ responsive nature is explored through their integration into optical, electrochemical, and piezoelectric sensors. These sensors are instrumental in medical diagnostics for glucose monitoring, pathogen detection, and biomarker identification, as well as in environmental and industrial applications like pollution and food quality monitoring. Furthermore, the review explores cross-disciplinary innovations, including the use of hydrogels in wearable devices, and hybrid systems, and their potential in personalized medicine. By addressing current challenges and future directions, this review aims to underscore the transformative impact of hydrogel technologies in advancing healthcare and industrial practices, thereby providing a vital resource for researchers and practitioners in the field. Full article

The design of chemical sensors and probes is usually based on selective receptors for individual analytes, however, many analytical tasks are dedicated to multi-analyte sensing or recognizing properties of the sample related to more than one analyte. While it is possible to simultaneously use multiple sensors/receptors in such cases, multi-responsive probes could be an attractive alternative. In this work, we use thiomalic acid-capped CdTe quantum dots as a multiple-response receptor for the detection and quantification of six heavy metal cations: Ag(I), Cd(II), Co(II), Cu(II), Ni(II), and Pb(II) at micromolar concentration levels. Multiplexing is realized via multispectral fluorescence (so-called virtual sensor array). For such a sensing strategy, the effective decoding of the excitation–emission spectrum is essential. Herein, we show how various parameters of chemometric analysis by the Partial Least Squares method, such as preprocessing type and data structure, influence the performance of discrimination and quantification of the heavy metals. The established models are characterized by respective performance metrics (accuracy, sensitivity, precision, specificity/RMSE, a, b, R²) determined for both train and test sets in replicates, to obtain reliable and repeatable results. Full article

The distribution of tiny sensors over a specific area was first proposed in the late 1990s as a concept known as smart dust. Several efforts focused primarily on computing and networking capabilities, but quickly ran into problems related to power supply, cost, data transmission, and environmental pollution. To overcome these limitations, we propose using paper-based (confetti-like) chemosensors that exploit the inherent selectivity of chemical reagents, such as colorimetric indicators. In this work, cheap and biodegradable passive sensors made from cellulose could successfully indicate the presence of hazardous chemicals, e.g., strong acids, by a significant color change. A conventional color digital camera attached to a drone could easily detect this from a safe distance. The collected data were processed to define the hazardous area. Our work presents a combination of the smart dust concept, chemosensing, paper-based sensor technology, and low-cost drones for flexible, sensitive, economical, and rapid detection of hazardous chemicals in high-risk scenarios. Full article

Active life monitoring via chemosensitive sensors could hold promise for enhancing athlete monitoring, training optimization, and performance in athletes. The present work investigates a resistive flex sensor (RFS) in the guise of a chemical sensor. Its carbon ‘texture’ has shown to be sensitive to CO₂, O₂, and RH changes; moreover, different bending conditions can modulate its sensitivity and selectivity for these gases and vapors. A three-step feasibility study is presented including: design and fabrication of the electronic read-out and control; calibration of the sensors to CO₂, O₂ and RH; and a morphological study of the material when interacting with the gas and vapor molecules. The 0.1 mm⁻¹ curvature performs best among the tested configurations. It shows a linear response curve for each gas, the ranges of concentrations are adequate, and the sensitivity is good for all gases. The curvature can be modulated during data acquisition to tailor the sensitivity and selectivity for a specific gas. In particular, good results have been obtained with a curvature of 0.1 mm⁻¹. For O₂ in the range of 20–70%, the sensor has a sensitivity of 0.7 mV/%. For CO₂ in the range of 4–80%, the sensitivity is 3.7 mV/%, and for RH the sensitivity is 33 mV/%. Additionally, a working principle, based on observation via scanning electron microscopy, has been proposed to explain the chemical sensing potential of this sensor. Bending seems to enlarge the cracks present in the RFS coverage; this change accounts for the altered selectivity depending on the sensor’s curvature. Further studies are needed to confirm result’s reliability and the correctness of the interpretation. Full article

Hazards associated with highly dangerous pollutants/contaminants in water, air, and land resources, as well as food, are serious threats to public health and the environment. Thus, it is imperative to detect or decontaminate, as risk-control strategies, the possible harmful substances sensitively and efficiently. In this context, due to their capacity to be specifically designed for various types of hazardous compounds, the synthesis and use of molecularly imprinted polymers (MIPs) have become widespread. By molecular imprinting, affinity sites with complementary shape, size, and functionality can be created for any template molecule. MIPs' unique functions in response to external factors have attracted researchers to develop a broad range of MIP-based sensors with increased sensitivity, specificity, and selectivity of the recognition element toward target hazardous compounds. Therefore, this paper comprehensively reviews the very recent progress of MIPs and smart polymer applications for sensing or decontamination of hazardous compounds (e.g., drugs, explosives, and biological or chemical agents) in various fields from 2020 to 2024, providing researchers with a rapid tool for investigating the latest research status. Full article

The search for a synthesis method to create longer ZnO NWAs with high-quality vertical alignment, and the investigation of their electrical properties, have become increasingly important. In this study, a hydrothermal method for growing vertically aligned arrays of ZnO nanowires (NWs) using localized heating was utilized. To produce longer NWs, the temperature environment of the growth system was optimized with a novel reaction container that provided improved thermal insulation. At a process temperature above ~90 °C, ZnO NWs reached a length of ~26.8 µm within 24 h, corresponding to a growth rate of 1.1 µm/h, nearly double the rate of 0.6 µm/h observed in traditional chemical bath growth using a glass reactor. The densely grown NWs (~1.9/µm²), with a diameter of ~0.65 µm, exhibited a preferred hexagonal c-axis orientation and were vertically aligned to the (100) silicon (Si) substrate. These NW structures have multiple applications, e.g., in piezotronic strain sensors, gas sensing, and piezoelectric energy harvesting. As proof of concept, a piezoelectric nanogenerator (PENG) was fabricated by embedding the NWs in an S1818 polymer matrix over a 15 mm × 15 mm area. Under repeated impulse-type compressive forces of 0.9 N, a maximum peak output voltage of ~95.9 mV was recorded, which is higher by a factor of four to five than the peak output voltage of 21.6 mV previously obtained with NWs measuring ~1.8 µm in length. Full article

Fire, a prevalent land management tool in rotational shifting cultivation (RSC), has long been debated for its immediate disruption of surface soil, vegetation, and microbial communities. While low-intensity and short-duration slash-and-burn techniques are considered beneficial for overall soil function, the dual nature of fire’s impact warrants a comprehensive exploration. This review examines both the beneficial and detrimental effects of fire on soil properties within the context of RSC. We highlight that research on soil microbial composition, carbon, and nitrogen dynamics following fire events in RSC is gaining momentum. After fires, soil typically shows decreases in porosity, clay content, aggregation, and cation exchange capacity, while sand content, pH, available phosphorus, and organic nitrogen tend to increase. There remains ongoing debate regarding the effects on bulk density, silt content, electrical conductivity, organic carbon, total nitrogen, and exchangeable ions (K⁺, Ca²⁺, Mg²⁺). Certain bacterial diversity often increases, while fungal communities tend to decline during post-fire recovery, influenced by the soil chemical properties. Soil erosion is a major concern because fire-altered soil structures heighten erosion risks, underscoring the need for sustainable post-fire soil management strategies. Future research directions are proposed, including the use of advanced technologies like remote sensing, UAVs, and soil sensors to monitor fire impacts, as well as socio-economic studies to balance traditional practices with modern sustainability goals. This review aims to inform sustainable land management practices that balance agricultural productivity with ecological health in RSC systems. Full article

In this work, TiO₂ spherical nanoparticles with a mean diameter of 10.08 nm (SD = 4.54 nm) were synthesized using Aloe vera extract. Rutile, brookite, and anatase crystalline phases were identified. The surface morphology of a carbon paste electrode does not change in the presence of nanoparticles; however, the surface chemical composition does. The voltammetric response to dicresyl dithiophosphate was higher when the electrode was modified with TiO₂ nanoparticles. After an electrochemical response study from pH 1.0 to 12.0, pH 7.0 was selected for the electroanalysis. The electroactive area of the modified sensor was 0.036 cm², while it was 0.026 cm² for the bare electrode. The oxidation process showed mixed adsorption-diffusion control. The charge transfer resistance of the modified sensor (530.1 Ω, SD = 4.08 Ω) was much lower than that of the bare electrode (4298 Ω, SD = 8.53 Ω). The linear quantitative range by square wave voltammetry was from 5 to 150 μmol/L, with a limit of detection of 1.89 μmol/L and a limit of quantification of 6.26 μmol/L under optimal pulse parameters of 50 Hz frequency, 1 mV step potential, and 25 mV pulse amplitude. The sensor response was repeatable and reproducible over 30 days. The results on real flotation and synthetically contaminated soil samples were statistically equivalent to those obtained by UV-vis spectrophotometry. A dithiocarbamate showed an interfering effect on the sensor response to dithiophosphate. Full article