Search Results (5,075)

Industrial and domestic human activities have a significant impact on the environment, contributing, among other things, to the increased pollution of natural waters. The spread of heavy metals is particularly dangerous to the health and life of living organisms due to the high accumulation potential of, among others, Cr (VI), Zn (II), Cu (II), Cd (II), Fe (II), and Ni (II). In order to remove, concentrate, and/or recover ions of these metals, various physical and/or chemical methods are commonly used. In this study, spent coffee grounds (SCGs) efficiently removed copper ions from simulated aqueous solutions, especially at low metal ion concentrations. Without additional modification, coffee grounds performed comparably to traditional adsorbents like activated carbon or ion exchangers. It was found that used ground coffee grounds effectively removed Cu (II) ions at a wide range of concentrations, with the highest efficiency (over 85%) obtained for dilute solutions. On the other hand, regeneration tests performed using a 10% hydrochloric acid solution successfully restored the coffee residue adsorbent, achieving a desorption efficiency of about 35%. This method concentrated the solution and facilitated efficient metal recovery by minimizing acid usage. The sorbent used is an innovative, cheap, and easy-to-use material with high sorption capabilities. Full article

Yarrow (Achillea millefolium L., AM) is a widely used medicinal plant, with its essential oil highly valued in the cosmetic industry. In view of the numerous biological effects, however, microencapsulation, due to its ability to protect sensitive constituents, transform liquids into solid-state material, and provide modification of release kinetics, might open up new possibilities for the biomedical utilization of yarrow essential oil (AMO). In the current work, yarrow plantation was established by its propagation from spontaneous flora. Following the steam distillation of aerial parts, the chemical composition of the essential oil was determined by GC-MS analysis and compared with two commercial samples. This study concludes that Achillea millefolium L. from this region, given the environmental conditions, produces high-azulene-content essential oil. Furthermore, microencapsulation of AMO was successfully performed by complex coacervation into gelatin (GE) and gum arabic (GA) based core–shell microcapsules (MCs). According to the optical microscopic investigation, the particle sizes of the formed polynucleated microcapsules ranged from 14 to 132 µm, with an average of 47 µm. The assessment of morphology by SEM analysis of the freeze-dried form revealed a sponge-like character with embedded circular structures. The microencapsulation was confirmed by FT-IR spectroscopy and differential scanning calorimetry (DSC), while an encapsulation efficiency of 87.6% was determined by UV spectroscopy. GC-MS analysis revealed that microencapsulation preserves the key components of the essential oil. It was concluded that AMO can be effectively processed by complex coacervation followed by freeze-drying into solid-state material for new applications. Full article

Dietary factors may be implicated in the formation of kidney stones and should be closely monitored. To achieve this aim, patients are routinely assessed by means of generic dietary recall, a tool widely used by authors in a range of extensive patient populations to record food intake; the findings obtained, however, may be skewed due to dietary variations and underestimation of the effect of food additives. Fifty Frequent Kidney Stone Formers (FKSFs, mean age: 54.3 ± 13.9 years) with normal kidney function, absence of comorbidities, and reliable compliance were selected from a total of 68 patients’ resident in Sardinia, an Italian island where genetic admixtures have been relatively rare for generations. The study, conducted from 1 January 2020 to 31 December 2023, was aimed at assessing nutritional values based on the meticulous recording of food quantities, quality, and potential modifications related to food preparation. Patients were selected during an initial clinical check-up and all efforts made to ensure they were capable of reliably recording all food and drinks consumed. A seven-day food diary was provided in which food and drink intake and their impact on 24 h urine output was recorded. The following parameters were measured in both foods and urine output: citrates, oxalates, calcium, phosphorous, uric acid, proteins and nitrogen compounds, magnesium, sulfates, potassium, carbohydrates, free fatty acids. Study outcomes established the presence of hypocitraturia, hyperoxaluria, hypercalciuria, and moderately high levels of nitrogen compounds. Univariate analysis followed by multivariate analysis for further confirmation were performed and the following observations made. Citrate intake correlated with citraturia but did not promote oxaluria; calcium intake promoted onset of sulfaturia, azoturia, and ammoniuria, whilst magnesium correlated with magnesiuria but not with oxaluria, calciuria, phosphaturia, and azoturia; sulfate intake elicited onset of azoturia but not kaliuresis; potassium intake promoted oxaluria and protein intake resulted in onset of ammoniuria and azoturia. (A) The chemical composition of urine based on dietary intake is hard to predict without taking into account the presence of dietary and urinary interferents; (B) the geographic isolation of patients studied underlines the importance of epigenetics in maintaining a traditional dietary heritage. (C) Moreover, the widespread use of food additives should consistently be taken into account to ensure a correct diagnosis of FKSF and set up a valid treatment plan. Full article

This work focuses on the first use of ultrasonic phenol-ene coupling as a polymer analogous transformation. The ultrasonic reaction was introduced into chitin chemistry, resulting in the fast and convenient preparation of new water-soluble cationic chitin derivatives. Since water-soluble derivatives of fully deacetylated chitin are poorly described in the literature, the synthesis of each new type of these derivatives is a significant event in polysaccharide chemistry. Polycations, or cationic polymers, are of particular interest as antibacterial agents. Consequently, the resulting polymers were tested for their antibacterial activity and toxicity. We found that the highly substituted polymer of medium molecular weight exhibited the most pronounced in vitro antibacterial effect. We prepared nanoparticles using the ionic gelation technique. The most effective in vitro antibacterial chitin-based systems were tested in vivo in rats. These tests demonstrated outstanding antibacterial effects combined with an absence of toxicity. Additionally, we found that the resulting polymers, unlike their nanoparticle counterparts, also exhibited strong antioxidant effects. In summary, we demonstrated the effectiveness of ultrasound in polymer chemistry and highlighted the importance of the sonochemical approach in the chemical modification of polysaccharides. This approach enables the synthesis of derivatives with improved physicochemical and biological properties. Full article

Pactamycin (PCT), an antibiotic produced by Streptomyces pactum, is a five-membered ring aminocyclitol that is active against a variety of Gram-positive and Gram-negative microorganisms, as well as several animal tumor lines in culture and in vivo. Pactamycin targets the small ribosomal subunit and inhibits protein synthesis in bacteria, archaea, and eukaryotes, but due to its toxicity is used only as a tool for biochemical research. Prompted by the successful and well-established procedure for the derivatization of antibiotics, we modified pactamycin by tethering basic amino acids to the free primary amino group of the aminocyclitol ring. Specifically, lysine, ornithine, and histidine were conjugated via an amide bond, and the antimicrobial activity of the derivatives was evaluated both in vivo and in vitro. According to our results, their antimicrobial activity was maintained at almost equal levels, while their toxicity was reduced compared to the parent molecule. These findings suggest that the new pactamycin derivatives can be considered as promising pharmacophores for the development of new antimicrobials that are able to combat the dangerously increasing resistance of pathogens to antibiotics. Full article

Lignin, one of Earth’s most abundant biopolymers, is rich in phenolic and aliphatic functional groups, offering significant potential for chemical modification. Technical lignin, a byproduct of the kraft process, is produced in large quantities annually and can be used to enhance the properties of polymer matrices such as polypropylene (PP). PP, a widely used nonpolar polymer, suffers from low surface free energy, leading to poor adhesion properties. Combining PP with polar, renewable-source polymers like lignin can improve these properties. This study investigates the direct acetylation of kraft lignin (KL) to improve its dispersion in the PP matrix and enhance wettability and adhesion. The acetylation of KL was confirmed through FTIR and DSC analyses. PP and acetylated KL (AKL) were combined and processed via continuous extrusion. The blends’ thermal and mechanical properties, lignin dispersion, and wettability were evaluated. Additionally, PP and PP–lignin films were bonded to aluminized biaxially oriented polypropylene (BOPP) for peel tests. Results showed increased surface free energy and improved adhesion, particularly in samples with AKL due to better dispersion. This direct acetylation route significantly enhances PP’s surface free energy and adhesion, presenting a sustainable alternative to fossil-based materials and promoting the use of lignin, a renewable and low-cost polymer. Full article

Polymer composites are widely used in various fields of production and life, and the study of preparing environmentally friendly and flame retardant clay/polymer composites has gradually become a global research hotspot. But how to efficiently surface modify clay and apply it to the field of flame retardant polymers is still a potential challenge. One of the most commonly used surface modification methods is the modification of clay with silane coupling agents. The hydrolysable groups of the silane coupling agent first hydrolyze to generate hydroxyl groups. These hydroxyl groups then undergo a condensation reaction with the hydroxyl groups on the surface of the clay, allowing for organic functional groups to be grafted onto the clay surface. The organic functional groups and polymer matrix react to generate chemical bonds so that the composite material’s interface is more closely combined. Thus, the dispersion of clay in the organic polymer material and the compatibility of the two is better, which improves the flame retardant effect of the composite material. This paper introduces the classification of a silane coupling agent and the mechanism and process of silane coupling agent-modified clay, outlines the mechanism of silane coupling agent-modified clay flame retardant polymers, reviews the research results on flame retardant polymers of various clays after surface treatment with silane coupling agents in recent years, and highlights the synergistic flame retardant effect of clay and flame retardant organized by silane coupling agents. Finally, it is found that the current research in the field of silane coupling agent-modified clay in flame retardants is focused on the modification of montmorillonite, sepiolite, attapulgite, and kaolinite by KH-550, KH-560, and KH-570, and the development trends in this field are also prospected. Full article

The abundant pore structure and carbon composition of sphagnum peat moss render it a bio-based adsorbent for efficient methylene blue removal from wastewater. By utilizing sphagnum moss sourced from Guizhou, China, as raw material, a cost-effective and highly efficient bio-based adsorbent material was prepared through chemical modification. The structure and performance of the modified sphagnum moss were characterized using SEM, EDS, FTIR, and TGA techniques. Batch adsorption experiments explored the effects of contact time, adsorbent dosage, pH, initial dye concentration, and temperature on adsorption performance. Kinetics, isotherm models, and thermodynamics elucidated the adsorption behavior and mechanism. The modified sphagnum moss exhibited increased surface roughness and uniform surface modification, enhancing active site availability for improved adsorption. Experimental data aligned well with the Freundlich isotherm model and pseudo-second-order kinetic model, indicating efficient adsorption. The study elucidated the adsorption mechanism, laying a foundation for effective methylene blue removal. The utilization of modified sphagnum moss demonstrates significant potential in effectively removing MB from contaminated solutions due to its robust adsorption capability and efficient reusability. Full article

Chitosan is a very promising material for tissue model printing. It is also known that the introduction of chemical modifications to the structure of the material in the form of methacrylate groups makes it very attractive for application in the bioprinting of tissue models. The aim of this work is to study the characteristics of biomaterials containing chitosan (BCH) and its methacrylated equivalent (BCM) in order to identify differences in their usefulness in 3D bioprinting technology. It has been shown that the BCM material containing methacrylic chitosan is three times more viscous than its non-methacrylated BCH counterpart. Additionally, the BCM material is characterized by stability in a larger range of stresses, as well as better printability, resolution, and fiber stability. The BCM material has higher mechanical parameters, both mechanical strength and Young’s modulus, than the BCH material. Both materials are ideal for bioprinting, but BCM has unique rheological properties and significant mechanical resistance. In addition, biological tests have shown that the addition of chitosan to biomaterials increases cell proliferation, particularly in 3D-printed models. Moreover, modification in the form of methacrylation encourages reduced toxicity of the biomaterial in 3D constructs. Our investigation demonstrates the suitability of a chitosan-enhanced biomaterial, specifically methacrylate-treated, for application in tissue engineering, and particularly for tissues requiring resistance to high stress, i.e., vascular or cartilage models. Full article

The surface of calcined kaolinite particles underwent chemical modification using Vinyltriethoxysilane (VTMS) and 3-mercaptopropionic acid (3-MPA). The grafting ratio of VTMS on the calcined kaolinite surface was adjusted by varying its quantity. FT-IR analysis revealed the initial grafting of VTMS onto the kaolinite surface, resulting in the formation of a C=C reactive site on the surface. Subsequently, an olefin click reaction with 3-MPA occurred, leading to the effective grafting of 3-MPA onto the kaolinite surface and the formation of an efficient coating. Thermal analysis indicated that the optimal grafting level was achieved at a modifier content V:K ratio of 0.5. The estimated grafting ratio of the modifier on the kaolinite surface was approximately 40% when V:K was 0.5. Water contact angle and dispersion experiments demonstrated that the surface properties of kaolinite were effectively controlled by this modification approach. At V:K = 0.3, the modified kaolinite particles exhibited good dispersion in both polar and non-polar solvents. In polar solvents, the average particle size of modified kaolinite was below 1100 nm, while in non-polar solvents, it did not exceed 5000 nm. Considering all aspects, a V:K ratio of 0.3 is recommended. Further investigation into the impact of adding 3-MPA on the surface properties of modified kaolinite particles based on V:K = 0.3 revealed that the hydrophilicity of the modified particles could be enhanced. However, it is advised to keep the maximum M:V ratio (3-MPA to kaolinite) at 1.0. Full article

In the 19th century, the weighting of silk with metal salts, such as tin, was a common practice to enhance certain properties of silk fabrics and compensate for the weight loss incurred during the degumming process. This technique induces both physical and chemical modifications to the fibres, contributing to their long-term degradation, which requires thorough investigation. This study aims to examine the structural changes in silk fibres caused by the accumulation of metal salts from the tin-weighting process, using mock-up samples prepared through successive loading with weighting agents using a traditional tin-phosphate treatment method. Unweighted and tin-weighted silk samples were compared using scanning electron (SEM) micrographs, which presented the dispersed nanoparticles on the fibres, while through energy-dispersive X-ray spectroscopy (EDS) elemental mapping, the presence and uniform distribution of the weighting agents were confirmed. Fourier-transform infrared spectroscopy (FTIR) analysis revealed structural changes in tin-weighted silk samples compared to untreated ones, including shifts in amide bands, altered water/hydroxyl and skeletal stretching regions, and increased skeletal band intensities suggesting modifications in hydrogen bonding, β-sheet content, and structural disorder without significantly impacting the overall crystallinity index. X-ray diffraction (XRD) analysis of both pristine and tin-weighted silk samples revealed significant alterations, predominantly in the amorphous regions of the silk upon weighting. These structural changes were further examined using small-angle X-ray scattering (SAXS) and small- and wide-angle X-ray scattering (SWAXS), which provided detailed insights into modifications occurring at the nanometre scale. The analyses suggested disruptions in β-sheet crystals and intermolecular packing, especially in the amorphous regions, with increasing amounts of tin-weighting. Contact angle analysis (CA) revealed that the tin-phosphate-weighting process significantly impacted silk surface properties, transforming it from moderately hydrophobic to highly hydrophilic. These changes indicate that the incorporation of tin-phosphate nanoparticles on and within silk fibres could restrict the flexibility of polymer chains, impacting the physical properties and potentially the degradation behaviour of silk textiles. By studying these structural changes, we aim to deepen our understanding of how tin-weighting impacts silk fibre structure, contributing valuable insights into the longevity, conservation, and preservation strategies of silk textiles in the context of cultural heritage. Full article

The physical modification of starch to produce resistant starch (RS) is a viable strategy for the glycemic index (GI) lowering of foods and functionality improvement in starchy food products. RS cannot be digested in the small intestine but can be fermented in the colon to produce short-chain fatty acids rather than being broken down by human digestive enzymes into glucose. This provides major health advantages, like better blood sugar regulation, weight control, and a lower chance of chronic illnesses. This article provides a concise review of the recent developments in physical starch modification techniques, including annealing, extrusion, high-pressure processing, radiation, and heat–moisture treatment. Specifically, the focus of this paper is on the alteration of the crystalline structure of starch caused by the heat–moisture treatment and annealing and its impact on the resistance of starch to enzymatic hydrolysis, as well as the granular structure and molecular arrangement of starch caused by extrusion and high-pressure processing, and the depolymerization and crosslinking that results from radiation. The impacts of these alterations on starch’s textural qualities, stability, and shelf life are also examined. This review demonstrates how physically modified resistant starch can be used as a flexible food ingredient with both functional and health benefits. These methods are economically and ecologically sustainable since they successfully raise the RS content and improve its functional characteristics without the need for chemical reagents. The thorough analysis of these methods and how they affect the structural characteristics and health advantages of RS emphasizes the material’s potential as an essential component in the creation of functional foods that satisfy contemporary dietary and health requirements. Full article

New carriers for protein immobilization are objects of interest in various fields of biomedicine. Immobilization is a technique used to stabilize and provide physical support for biological micro- and macromolecules and whole cells. Special efforts have been made to develop new materials for protein immobilization that are non-toxic to both the body and the environment, inexpensive, readily available, and easy to modify. Currently, biodegradable and non-toxic polymers, including cellulose, are widely used for protein immobilization. Bacterial cellulose (BC) is a natural polymer with excellent biocompatibility, purity, high porosity, high water uptake capacity, non-immunogenicity, and ease of production and modification. BC is composed of glucose units and does not contain lignin or hemicellulose, which is an advantage allowing the avoidance of the chemical purification step before use. Recently, BC–protein composites have been developed as wound dressings, tissue engineering scaffolds, three-dimensional (3D) cell culture systems, drug delivery systems, and enzyme immobilization matrices. Proteins or peptides are often added to polymeric scaffolds to improve their biocompatibility and biological, physical–chemical, and mechanical properties. To broaden BC applications, various ex situ and in situ modifications of native BC are used to improve its properties for a specific application. In vivo studies showed that several BC–protein composites exhibited excellent biocompatibility, demonstrated prolonged treatment time, and increased the survival of animals. Today, there are several patents and commercial BC-based composites for wounds and vascular grafts. Therefore, further research on BC–protein composites has great prospects. This review focuses on the major advances in protein immobilization on BC for biomedical applications. Full article

Preclinical research on diabetes and obesity has been carried out in various animal models over the years. These animal models are developed from genetic manipulation that affects their body metabolism, chemical-induced procedures, diet alteration/modifications, or combinations of the aforementioned approaches. The diabetic and obesity animal models have allowed researchers to not only study the pathological aspect of the diseases but also enable them to screen and explore potential therapeutic compounds. Besides several widely known complications such as macrovascular diseases, diabetic neuropathy, nephropathy and retinopathy, type 2 diabetes mellitus is also known to affect bone health. There is also evidence to suggest obesity affects bone health. Therefore, continuous research needs to be conducted to find a remedy or solution to this matter. Previous literature reported evidence of bone loss in animal models of diabetes and obesity. These findings, as highlighted in this review, further augment the suggestion of an inter-relationship between diabetes, obesity and bone loss. Full article

Nowadays, with the approaching carbon neutrality deadlines and the implementation of zero-net carbon emission policies, the research and development of flame retardants are increasingly influenced by stringent regulations and laws. In this context, natural inorganic materials have garnered significant attention as promising flame retardants to enhance the fire resistance of polymer composites. These materials offer unique advantages, such as being environmentally friendly, cost-effective, and producing no carbon emissions during preparation. Consequently, in recent years, there has been a rapid increase in research on natural mineral flame retardants. This review systematically introduces the research progress on natural minerals as flame retardants in epoxy resin, highlighting their ability to provide exceptional fire resistance. Additionally, we categorize the various chemical modification approaches for natural minerals and explore different various natural mineral-based flame retardants. Furthermore, we elucidate the flame retardant mechanisms behind both natural and modified mineral flame retardant systems. Beyond summarizing and concluding the current state of research, we also project future research directions and identify challenges in the development of natural mineral flame retardants. Full article