Search Results (3,791)

Posterior capsular opacification (PCO) is the most common long-term complication of cataract surgery. Traditionally, the pathogenesis of PCO involves the residual lens epithelial cells (LECs), which undergo transdifferentiation into a myofibroblast phenotype, hyperproliferation, matrix contraction, and matrix deposition. This process is driven by the marked upregulation of inflammatory and growth factors post-surgery. Recently, research on the role of redox environments has gained considerable attention. LECs, which are in direct contact with the aqueous humour after cataract surgery, are subjected to oxidative stress due to decreased levels of reduced glutathione and increased oxygen content compared to contact with the outer fibre layer of the lens before surgery. In this review, we examine the critical role of oxidative stress in PCO formation. We also focus on glutaredoxins (Grxs), which are antioxidative enzymes produced via deglutathionylation, their protective role against PCO formation, and their therapeutic potential. Furthermore, we discuss the latest advancements in PCO therapy, particularly the development of advanced antioxidative pharmacological agents, and emphasise the importance and approaches of anti-inflammatory and antioxidant treatments in PCO management. In conclusion, this review highlights the significant roles of oxidative stress in PCO, the protective effects of Grxs against PCO formation, and the potential of anti-inflammatory and antioxidant therapies in treating PCO. Full article

Infections in confined environments can spread by direct contact, contaminated surfaces, and airborne transmission. This is critical in prison facilities, where cleaning and sanitary conditions are inadequate. An alternative is the development of antimicrobial surfaces. A new antimicrobial coating was developed by incorporating copper microparticles into a standard commercial paint, aiming to reduce the concentration of bacteria on surfaces by granting antimicrobial properties to surfaces. The copper additive comprised Cu₂Cl(OH)₃ deposited on polyhedral zeolite. The efficacy of this coating was evaluated in detention cells in a police station, which are temporary prisons and inherently dirty environments. The experiment compared a cell painted with the copper additive coating and a control cell with the standard paint. Viable coliforms were measured on different surfaces and in the air for five months under normal usage. Bacterial load was reduced by ca. 68% by the copper-amended paint on cement surfaces. Surprisingly, airborne viable coliforms were reduced by ca. 87% in the detention cell treated with the copper coating. This research highlights the potential of antimicrobial coatings in controlling the spread of infections through contact with contaminated surfaces and emphasizes the significant reduction in airborne bacterial load. It is especially relevant for controlling infections where sanitization is limited but can be extended to other built environments, such as healthcare facilities. Full article

Fungi of the genus Aspergillus are widespread in the environment, where they produce large quantities of airborne conidia. Inhalation of Aspergillus spp. conidia in immunocompromised individuals can cause a wide spectrum of diseases, ranging from hypersensitivity responses to lethal invasive infections. Upon deposition in the lung epithelial surface, conidia encounter and interact with complex microbial communities that constitute the lung microbiota. The lung microbiota has been suggested to influence the establishment and growth of Aspergillus spp. in the human airways. However, the mechanisms underlying this interaction have not yet been sufficiently investigated. In this study, we aimed to enrich and isolate bacterial strains capable of inhibiting the germination and growth of A. fumigatus conidia from bronchoalveolar lavage fluid (BALF) samples of lung transplant recipients using a novel enrichment method. This method is based on a soft agar overlay plate assay in which bacteria are directly in contact with conidia, allowing inhibition to be readily observed during enrichment. We isolated a total of five clonal bacterial strains with identical genotypic fingerprints, as shown by random amplified polymorphic DNA PCR (RAPD–PCR). All strains were identified as Pseudomonas aeruginosa (strains b1–b5). The strains were able to inhibit the germination and growth of Aspergillus fumigatus in a soft agar confrontation assay, as well as in a germination multiplate assay. Moreover, when compared with ten P. aeruginosa strains isolated from expectoration through standard methods, no significant differences in inhibitory potential were observed. Additionally, we showed inhibition of A. fumigatus growth on Calu-3 cell culture monolayers. However, the isolated P. aeruginosa strains were shown to cause significant damage to the cell monolayers. Overall, although P. aeruginosa is a known opportunistic lung pathogen and antagonist of A. fumigatus, we validated this novel one-step enrichment approach for the isolation of bacterial strains antagonistic to A. fumigatus from BALF samples as a proof-of-concept. This opens up a new venue for the targeted enrichment of antagonistic bacterial strains against specific fungal pathogens. Full article

Background and Objectives: This study aimed to investigate the effect of zinc phosphate (ZnP) cement, glass ionomer cement (GIC), and nano-integrated bio-ceramic (NIB) cement on mineralization when placed in contact with bone tissue-forming cells. Materials and Methods: ZnP cement, GIC, and NIB cement were divided into direct and indirect groups. A total of 72 cement pellets (24 pellets of each test sample) of 3 × 1 mm (width × height) were prepared using polytetrafluoroethylene molds. A total of 3 sample groups were demarcated using 96- cell well culture plates. In the control group, 24 wells were filled with mineralized osteoblasts and 1 µL of gingival crevicular fluid (GCF). In test group 1, to show a direct effect, 36 samples were plated with mineralized osteoblasts and 1 µL GCF for 24 h; the cells were directly exposed to cement pellets. A total of 36 samples were immersed in GCF for 24 h; later the supernatant was transferred to the mineralized osteoblasts to demonstrate an indirect effect in test group 2. To assess the mineralization, osteoblasts were stained with alizarin red and later observed under an inverted phase-contrast microscope. Data were analyzed using the statistical package for social sciences. An independent t-test compared the direct and indirect effects of the ZnP cement, GIC, NIB cement, and control groups on the mineralization of osteoblasts derived from hDPCs. Results: A statistically significant difference was observed between the ZnP cement, GIC, and NIB cement groups (p < 0.05). ZnP cement exhibited a moderate, NIB cement the least harmful effect, and GIC showed the most harmful effect on the mineralization of osteoblast cells. Conclusions: The biocompatibility of dental luting cements is an important aspect that clinicians should consider during their selection. Nano-integrated bio-ceramic cement showed the least negative effect on the mineralization of osteoblast cells which is beneficial for the cementation of cement-retained implant prostheses. However, further studies are needed to evaluate osteoblast and osteoclast activity in vivo. Full article

Cadherin−catenin cell−cell adhesion complexes, composed of cadherin, β-catenin or plakoglobin, and α-catenin (α-cat) molecules, are crucial for maintaining cell−cell contact and are commonly referred to as “adherens junctions (AJs).” Inactivating this system leads to loss of cell−cell contact and developmental arrest in early embryos. However, it remains unclear whether the loss of cell−cell contact affects the differentiation of embryonic cells. In this study, we explored the use of a murine embryonal carcinoma cell line, P19, as an in vitro model for early embryogenesis. P19 cells easily form embryoid bodies (EBs) and are susceptible to cellular differentiation in response to retinoic acid (RA) and teratoma formation. Using CRISPR/Cas9 technology to disrupt the endogenous α-cat gene in P19 cells, we generated α-cat knockout (KO) cells that exhibited a loss of cell−cell contact. When cultivated on non-coated dishes, these α-cat KO cells formed EBs, but their structures were labile. In the RA-containing medium, the α-cat KO EBs failed to produce differentiated cells on their outer layer and continued to express SSEA-1, an antigen specific to pluripotent cells. Teratoma formation assays revealed an absence of overt differentiated cells in tumors derived from α-cat KO P19 cells. Aggregation assays revealed the inability of the KO cells to colonize into the zona pellucida-denuded 8-cell embryos. These findings suggest that the AJs are essential for promoting the early stages of cellular differentiation and for the colonization of early-developing embryos. Full article

Bradymonabacteria, as the representative of the facultative prey-dependent predators, were re-classified from the preceding Deltaproteobacteria into the phylum Myxococcota and proposed as a novel class named Bradymonadia. However, it was ambiguous whether their predatory pattern and properties were similar to those of the other myxobacterial predators. Therefore, the physiologic features were compared to determine the similarities and differences during the process of group attack and kin discrimination. Comparative genomic analyses were performed to conclude the core genome encoded commonly by bradymonabacteria, Myxococcia, and Polyangia. In conclusion, we proposed that bradymonabacteria have a predation pattern similar to the that of the representative of opportunistic predators like Myxococcus xanthus but with some subtle differences. Their predation was predicted to be initiated by the needle-less T3SS*, and the S-motility mediated by T4P also participated in the process. Meanwhile, their group attacks relied on cell contact and cell destiny. Inter-species (strains) kin discriminations occurred without the existence of T6SS. However, no extracellular lethal substance was detected in the fermentation liquor culture of bradymonabacteria, and the death of prey cells could only be observed when touched by their cells. Moreover, the prey-selective predation was observed when the predator encountered certain prey from Bacillus (G⁺), Algoriphagus (G⁻), and Nocardioides (G⁺). Bradymonabacteria can be regarded as a potential consumer and decomposer, and preying on many sea-dwelling or human pathogenic bacteria allows this group a broad application prospect in marine culture and clinical disease control. Our study will provide more evidence for its exploitations and applications. Full article

This paper presents an integrated approach for a retinal prosthesis that overcomes the scalability challenges and limitations of conventional systems that use external cameras. Silicon nanowires (SiNWs) are utilized as photonic sensors due to their nanoscale dimensions and high surface-to-volume ratio. To enhance these properties and achieve high photoresponsivity, our research team developed a vertically stacked SiNW structure using a fabrication method entirely based on dry etching. The fabricated SiNW photodetector demonstrated excellent electrical and optical characteristics, including linear I–V characteristics that confirmed ohmic contact formation and high photoresponsivity exceeding 10⁵ A/W across the 400–800 nm wavelength range. The SiNW photodetector, following its integration with a switched capacitor stimulator circuit, exhibited a proportional increase in stimulation current in response to higher light intensity and increased SiNW density. In vitro experiments confirmed the efficacy of the integrated system in inducing neural responses from retinal cells, as indicated by an increased number of neural spikes observed at higher light intensities and SiNW densities. This study contributes to sensor technology by demonstrating an approach to integrating nanostructures and electronic components, which enhances control and functionality. Full article

In this study, specific additives were incorporated in polyhydroxyalcanoate (PHB) and polylactic acid (PLA) blend to improve its compatibility, and so enhance the cell metabolic activity of scaffolds for tissue engineering. The formulations were manufactured through material extrusion (MEX) additive manufacturing (AM) technology. As additives, petroleum-based poly(ethylene) with glicidyl metacrylate (EGM) and methyl acrylate-co-glycidyl methacrylate (EMAG); poly(styrene-co-maleic anhydride) copolymer (Xibond); and bio-based epoxidized linseed oil (ELO) were used. On one hand, standard geometries manufactured were assessed to evaluate the compatibilizing effect. The additives improved the compatibility of PHB/PLA blend, highlighting the effect of EMAG and ELO in ductile properties. The processability was also enhanced for the decrease in melt temperature as well as the improvement of thermal stability. On the other hand, manufactured scaffolds were evaluated for the purpose of bone regeneration. The mean pore size and porosity exhibited values between 675 and 718 μm and 50 and 53%, respectively. According to the results, the compression stress was higher (11–13 MPa) than the required for trabecular bones (5–10 MPa). The best results in cell metabolic activity were obtained by incorporating ELO and Xibond due to the decrease in water contact angle, showing a stable cell attachment after 7 days of culture as observed in SEM. Full article

Recent research has focused on immunotherapy with no side effects as an innovative medical treatment for cancer. However, typical drugs for immunotherapy are very expensive. Here, we propose the use of immunoceramics that activate immune cells by contact with their surface. Previous studies demonstrated that polymers, including the phenylboronic acid group, could activate lymphocytes. This activation may be due to the interaction between the sugar chains in cells and the OH group in B(OH)₃ formed via the dissociation of the BO₂ group. We have clarified that boron-containing apatite (BAp) activated lymphocytes in vitro. In this study, we fabricated the ceramic surfaces using the CaO-P₂O₅-SiO₂-B₂O₃ system (CPSB ceramics) containing BAp as a main crystalline phase. The results of the in vitro evaluation indicated that killer T cells in splenocytes cocultured with the CPSB ceramics were more numerous than in splenocytes cocultured on a control surface. The results of the in vivo evaluation indicated that the CPSB ceramics significantly inhibited tumor growth when CD8-positive T cells were cultured on individual ceramics and subsequently injected into tumor-bearing mice. The present CPSB ceramics are expected to be a valuable biomaterial for immunotherapy. Full article

Talaromyces marneffei is a thermally dimorphic fungus that can cause life-threatening systemic mycoses, particularly in immunocompromised individuals. Fungal homeobox transcription factors control various developmental processes, including the regulation of sexual reproduction, morphology, metabolism, and virulence. However, the function of homeobox proteins in T. marneffei has not been fully explored. Here, we searched the T. marneffei genome for the total homeobox transcription factors and predicted their biological relevance by performing gene expression analysis in different cell types, including conidia, mycelia, yeasts, and during phase transition. RfeB is selected for further computational analysis since (i) its transcripts were differentially expressed in different phases of T. marneffei, and (ii) this protein contains the highly conserved protein-protein interaction region (IR), which could be important for pathobiology and have therapeutic application. To assess the structure-function of the IR region, in silico alanine substitutions were performed at three-conserved IR residues (Asp276, Glu279, and Gln282) of RfeB, generating a triple RfeB mutated protein. Using 3D modeling and molecular dynamics simulations, we compared the protein complex formation of wild-type and mutated RfeB proteins with the putative partner candidate TmSwi5. Our results demonstrated that the mutated RfeB protein exhibited increased free binding energy, elevated protein compactness, and a reduced number of atomic contacts, suggesting disrupted protein stability and interaction. Notably, our model revealed that the IR residues primarily stabilized the RfeB binding sites located in the central region (CR). This computational approach for protein mutagenesis could provide a foundation for future experimental studies on the functional characterization of RfeB and other homeodomain-containing proteins in T. marneffei. Full article

The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bioMOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mechanism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays confirm full biocompatibility and suitability for HOb proliferation. Full article

Metastasis frequently targets bones, where cancer cells from the primary tumour migrate to the bone marrow, initiating new tumour growth. Not only is bone the most common site for metastasis, but it also often marks the first site of metastatic recurrence. Despite causing over 90% of cancer-related deaths, effective treatments for bone metastasis are lacking, with current approaches mainly focusing on palliative care. Circulating tumour cells (CTCs) are pivotal in metastasis, originating from primary tumours and circulating in the bloodstream. They facilitate metastasis through molecular interactions with the bone marrow environment, involving direct cell-to-cell contacts and signalling molecules. CTCs infiltrate the bone marrow, transforming into disseminated tumour cells (DTCs). While some DTCs remain dormant, others become activated, leading to metastatic growth. The presence of DTCs in the bone marrow strongly correlates with future bone and visceral metastases. Research on CTCs in peripheral blood has shed light on their release mechanisms, yet investigations into bone marrow DTCs have been limited. Challenges include the invasiveness of bone marrow aspiration and the rarity of DTCs, complicating their isolation. However, advancements in single-cell analysis have facilitated insights into these elusive cells. This review will summarize recent advancements in understanding bone marrow DTCs using single-cell analysis techniques. Full article

The present work shows that the exposure of mesothelial cells to simulated microgravity changes their cytoskeleton and adhesion proteins, leading to a cell switch from normal towards tumoral cells. Immunohistochemical and molecular data were obtained from both MeT-5A exposed to simulated microgravity and BR95 mesothelioma cell lines. Simulated microgravity was found to affect the expression of actin, vinculin, and connexin-43, altering their quantitative and spatial distribution pattern inside the cell. The analysis of the tumoral markers p27, CD44, Fibulin-3, and NANOG and the expression of genes related to cancer transformation such as NANOG, CDH-1, and Zeb-1 showed that the simulated microgravity environment led to expression patterns in MeT-5A cells similar to those observed in BR95 cells. The alteration in both quantitative expression and structural organization of the cytoskeleton and adhesion/communication proteins can thus be considered a pivotal mechanism involved in the cellular shift towards tumoral progression. Full article

Francisella is a highly infectious gram-negative bacterium that causes tularemia in humans and animals. It can survive and multiply in a variety of cells, including macrophages, dendritic cells, amoebae, and arthropod-derived cells. However, the intracellular life cycle of a bacterium varies depending on the cell type. Shortly after the infection of mammalian cells, the bacterium escapes the phagosome into the cytosol, where it replicates. In contrast, in the amoebae Acanthamoeba castellanii and Hartmannella vermiformis, the bacterium replicates within the membrane-bound vacuole. In recent years, the amoeba Dictyostelium discoideum has emerged as a powerful model to study the intracellular cycle and virulence of many pathogenic bacteria. In this study, we used D. discoideum as a model for the infection and isolation of Francisella novicida-containing vacuoles (FCVs) formed after bacteria invade the amoeba. Our results showed that F. novicida localized in a vacuole after invading D. discoideum. Here, we developed a method to isolate FCV and determined its composition by proteomic analyses. Proteomic analyses revealed 689 proteins, including 13 small GTPases of the Rab family. This is the first evidence of F. novicida-containing vacuoles within amoeba, and this approach will contribute to our understanding of host–pathogen interactions and the process of pathogen vacuole formation, as vacuoles containing bacteria represent direct contact between pathogens and their hosts. Furthermore, this method can be translocated on other amoeba models. Full article

Parasitic species of Trichoderma use hydrolytic enzymes to destroy the host cell wall. Preferent carbon and nitrogen sources suppress the expression of genes related to parasitism. Here, different nutrients were evaluated in the parasitic isolated NI-1, which was identified as Trichoderma atroviride. The genes cbh1 and chb2 (cellobiohydrolases), bgl3.1 (endoglucanase), and pra1 and prb1 (proteinases) were poorly expressed during the interaction between NI-1 and Phytophthora capsici on PDA. However, gene expression improved on minimal medium with preferent and alternative carbon sources. Dextrin and glucose stimulated higher transcript levels than cellulose, sucrose, and glycerol. Also, ammonium stimulated a stronger parasitic responsiveness than the alternative nitrogen sources. During interaction against different phytopathogens, NI-1 detects their host differentially from a distance due to the cbh1 and cbh2 genes being only induced by P. capsici. The pra1 and ech42 genes were induced before contact with Botrytis cinerea and Rhizoctonia solani, while when confronted with P. capsici they were stimulated until contact and overgrowth. The prb1 and bgl3.1 genes were induced before contact against the three-host assayed. Overall, T. atroviride prefers to parasitize and has the capacity to distinguish between an oomycete and a fungus, but nutrient quality regulates its parasitic responsiveness. Full article