Search Results (4)

The SCALE/Polaris–PARCS code procedure has been used in the confirmatory analysis for boiling water reactors by the US Nuclear Regulatory Commission. In this study, the SCALE/Polaris v6.3.0–PARCS v3.4.2 code procedure with the Evaluated Nuclear Data File (ENDF)/B-VII.1 AMPX 56-group library was validated by comparing the simulated results with the measured data for operating boiling water reactors, including Peach Bottom Unit 2 cycles 1–3, Hatch Unit 1 cycles 1–3, and Quad Cities Unit 1 cycles 1–3. The uncertainties and biases of the SCALE/Polaris–PARCS code package for boiling water reactor physics analysis were evaluated in the validation for key nuclear parameters such as reactivity and traversing in-core probe data. Full article

This study was conducted to validate the SCALE/Polaris v6.3.0–PARCS v3.4.2 code procedure with the Evaluated Nuclear Data File (ENDF)/B-VII.1 AMPX 56-group library for pressurized water reactor (PWR) analysis, by comparing simulated results with measured data for critical experiments and operating PWRs. Uncertainties of the SCALE/Polaris–PARCS code procedure for PWR analysis were evaluated in the validation for the PWR key nuclear parameters such as critical boron concentrations, reactivity, control bank work, temperature coefficients, and pin and assembly power peaking factors. Full article

The Polar Operational Limit Assessment Risk Indexing System (POLARIS) has been established as a viable framework for assessing operational capabilities and associated risks in polar waters. Despite its inherent suitability for high-latitude territories, ships navigating through seasonal ice-infested waters at lower latitudes also encounter critical safety, environmental, and economic issues exacerbated by the presence of ice. This necessitates a reliable and adaptable methodology that can serve as a reference for devising effective countermeasures. This study evaluated the use of POLARIS in the intricate ice conditions prevalent in the northern navigable waters (channels and anchorages) within Liaodong Bay of the Bohai Sea, located at relatively low latitudes. Using GF-4 satellite imagery, ice conditions were collected, and the POLARIS methodology was employed to calculate Risk Index Outcome (RIO) values for non-ice-strengthened vessels during the winter season of 2021–2022. The results showed that sectors 3, 4, 5, 7, 9, 10, and 11 within the northern part of Liaodong Bay exhibited a higher risk, with sectors 5 and 10 exhibiting the most significant risk, while sectors 1 and 2 demonstrated relatively lower risk levels. The concurrence of these findings with acknowledged ice patterns and local maritime practices confirms the applicability of the POLARIS methodology in saline, seasonally ice-covered seas. Notably, the combination of POLARIS with high-resolution satellite imagery facilitated a more precise and rapid assessment of ice risk, thereby enhancing situational awareness and informing decision-making processes in maritime operations under icy conditions. In addition, this study provides preliminary evidence that POLARIS is suitable for fine-scale scenarios, in addition to being applicable to sparse-scale scenarios, such as polar waters, especially with high-resolution ice data. At the same time, this study highlights the potential of POLARIS as a disaster prevention strategy and a tool for the maritime industry to address ice challenges. Full article

Progress in sensor technologies has allowed real-time monitoring of soil water. It is a challenge to model soil water content based on remote sensing data. Here, we retrieved and modeled surface soil moisture (SSM) at the U.S. Climate Reference Network (USCRN) stations using Sentinel-1 backscatter data from 2016 to 2018 and ancillary data. Empirical machine learning models were established between soil water content measured at the USCRN stations with Sentinel-1 data from 2016 to 2017, the National Land Cover Dataset, terrain parameters, and Polaris soil data, and were evaluated in 2018 at the same USCRN stations. The Cubist model performed better than the multiple linear regression (MLR) and Random Forest (RF) model (R² = 0.68 and RMSE = 0.06 m³ m^-3 for validation). The Cubist model performed best in Shrub/Scrub, followed by Herbaceous and Cultivated Crops but poorly in Hay/Pasture. The success of SSM retrieval was mostly attributed to soil properties, followed by Sentinel-1 backscatter data, terrain parameters, and land cover. The approach shows the potential for retrieving SSM using Sentinel-1 data in a combination of high-resolution ancillary data across the conterminous United States (CONUS). Future work is required to improve the model performance by including more SSM network measurements, assimilating Sentinel-1 data with other microwave, optical and thermal remote sensing products. There is also a need to improve the spatial resolution and accuracy of land surface parameter products (e.g., soil properties and terrain parameters) at the regional and global scales. Full article