Search Results (1,586)

This study presents an all-optical approach based on an XOR logic gate for encryption by interference and the assistance of multiphotonic effects exhibited by carbon nanotubes. We integrate a Michelson interferometer to propose the encryption system. The key innovation lies in the use of multiwalled carbon nanotubes (MWCNT) to control the XOR operation through intensity-dependent nonlinear optical absorption. We introduce control based on nanosecond nonlinear optical absorption in MWCNT. By measuring irradiance propagation through thin-film samples of MWCNT, we demonstrate a threshold-based binary data recording system that is highly resistant to unauthorized access. The combination of interferometric response, MWCNT-based intensity control, and multicriteria decision analysis through nonlinear absorption presents a powerful and versatile approach to optical encryption. This method has the potential to be a base for secure communication systems and optical computing, with possible extensions to biological computing and microbiology. While challenges in power optimization and scaling remain, this research marks a significant step towards advanced, ultrafast encryption systems. Full article

The investigation of new composite materials possessing low weight but not at the expense of their mechanical performance is of great interest in terms of reducing energy consumption in many industrial applications. This study is focused on the nanomechanical characterization of high-density polyethylene (HDPE)-based composite specimens modified with equal loadings of graphene nanoplatelets (GNPs) and/or multiwall carbon nanotubes (MWCNTs). Quasi-static nanoindentation analysis revealed the impact of the carbon nanofillers on the receiving of nanocomposites with higher nanohardness and reduced modulus of elasticity, reaching values of 0.146 GPa and 3.57 GPa, respectively. The role of the indentation size effect in elastic polymer matrix was assessed by applying three distinct peak forces. Nanoscratch experiments depicted the tribological behavior of the composite samples and inferred the influence of the carbon nanofillers on the values of the coefficient of friction (COF). It seems that the incorporation of 4 wt% GNPs in the polymer structure improves the scratch resistance of the material, resulting in a higher value of the exerted lateral force and therefore leading to the detection of a higher coefficient of friction at scratch of 0.401. A considerable pile-up response of the scratched polymer specimens was observed by means of in-situ SPM imaging of the tested surface sample area. The sway of the carbon nanoparticles on the composite pile-up behavior and the effect of the pile-up on the measured friction coefficients have been explored. Full article

The escalating release of multi-walled carbon nanotubes (MWCNTs) into the environment has raised concerns due to their potential ecotoxicological impacts. However, their combined phytotoxicity with heavy metals such as copper (Cu) is still unclear. This study investigated the individual and combined toxic effects of MWCNTs (MWCNT, MWCNT-OH, and MWCNT-COOH) and Cu²⁺ on ryegrass (Lolium multiflorum), uniquely considering different addition orders. The results show that Cu severely inhibited the growth of ryegrass while MWCNTs exhibited a hormesis effect on ryegrass. When MWCNT and Cu were combined, the malondialdehyde (MDA) content in ryegrass showed a 32.39% increase at 20 mg/L MWCNT exposure, suggesting reduced oxidative stress. However, at the higher concentration of 1000 mg/L, it led to a significant 75.22% reduction in ryegrass biomass. MWCNT-COOH had the most pronounced effect, reducing the total chlorophyll content by 39.76% compared to unmodified MWCNT and by 10.67% compared to MWCNT-OH (500 mg/L). Additionally, pre-induced MWCNTs might alleviate the Cu in the plant by 23.08–35.38% through adsorption in the nutrient solution. Small molecule organic acids and amino acids primarily mediated the response to environmental stress in ryegrass. This research provides crucial insights into understanding the complex interactions of MWCNT and Cu²⁺ and their combined effects on plant ecosystems. Full article

This study addresses the persistent challenge of polysulfide dissolution in lithium–sulfur (Li–S) batteries by introducing magnesium oxide (MgO) nanoparticles as a novel additive. MgO was integrated with sulfur using a scalable process involving solid-state melt diffusion treatment followed by planetary ball milling. XRD measurements confirmed that sulfur (S₈) retains its orthorhombic crystalline structure (space group Fddd) following the MgO incorporation, with minimal peak shifts indicating slight lattice distortion, while the increased peak intensity suggests enhanced crystallinity due to MgO acting as a nucleation site. Additionally, Raman spectroscopy demonstrated sulfur’s characteristic vibrational modes consistent with group theory (point group D2h) and highlighted multiwalled carbon nanotube (MWCNT′s) D, G, and 2D bands, with a low I_D/I_G ratio (0.47), which indicated low defects and high crystallinity in the prepared cathode. The S–MgO composite cathode exhibited superior electrochemical behavior, with an initial discharge capacity (950 mA h g⁻¹ at 0.1 C), significantly improved compared to pristine sulfur’s. The presence of MgO effectively mitigated the polysulfide shuttle effect by trapping polysulfides, leading to enhanced stability over 400 cycles and the consistent coulombic efficiency of over 99.5%. After 400 cycles, EDS and SEM analyses confirmed the structural integrity of the electrode, with only minor fractures and slight sulfur content loss. Electrochemical impedance spectroscopy further confirmed the enhanced performance. Full article

The production of cost-effective novel materials for PV solar cells with long-term stability, high energy conversion efficiency, enhanced photon absorption, and easy electron transport has stimulated great interest in the research community over the last decades. In the presented work, Cu/Cu₂S-MWCNTs nanocomposites were produced and analyzed in the framework of potential applications for PV solar cells. Firstly, the surface of the produced one-dimensional Cu was covered by Cu₂S nanoflake. XRD data prove the formation of both Cu and Cu₂S structures. The length and diameter of the one-dimensional Cu wire were 5–15 µm and 80–200 nm, respectively. The thickness of the Cu₂S nanoflake layer on the surface of the Cu was up to 100 nm. In addition, the Cu/Cu₂S system was enriched with MWCNTs. MWCNs with a diameter of 50 nm interact by forming a conductive network around the Cu/Cu₂S system and facilitate quick electron transport. Raman spectra also prove good interfacial coupling between the Cu/Cu₂S system and MWCNTs, which is crucial for charge separation and electron transfer in PV solar cells. Furthermore, UV studies show that Cu/Cu₂S-MWCNTs nanocomposites have a wide absorption band. Thus, MWCNTs, Cu, and Cu₂S exhibit an intense absorption spectrum at 260 nm, 590 nm, and 972 nm, respectively. With a broad absorption band spanning the visible–infrared spectrum, the Cu/Cu₂S-MWCNTs combination can significantly boost PV solar cells’ power conversion efficiency. Furthermore, UV research demonstrates that the plasmonic character of the material is altered fundamentally when CuS covers the Cu surface. Additionally, MWCN-Cu/Cu2S nanocomposite exhibits hybrid plasmonic phenomena. The bandgap of Cu/Cu₂S NWs was found to be approximately 1.3 eV. Regarding electron transfer and electromagnetic radiation absorption, the collective oscillations in plasmonic metal-p-type semiconductor–conductor MWCNT contacts can thus greatly increase energy conversion efficiency. The Cu/Cu₂S-MWCNTs nanocomposite is therefore a promising new material for PV solar cell application. Full article

Flexible electronics is pursuing a new generation of electronic skin and human–computer interaction. However, effectively detecting large dynamic ranges and highly sensitive human movements remains a challenge. In this study, flexible strain sensors with a self-assembled PDMS/MXene/MWCNT structure are fabricated, in which MXene particles are wrapped and bridged by dense MWCNTs, forming complex sliding conductive networks. Therefore, the strain sensor possesses an impressive sensitivity (gauge factor = 646) and 40% response range. Moreover, a fast response time of 280 ms and detection limit of 0.05% are achieved. The high performance enables good prospects in human detection, like human movement and pulse signals for healthcare. It is also applied to wearable smart data gloves, in which the CNN algorithm is utilized to identify 15 gestures, and the final recognition rate is up to 95%. This comprehensive performance strain sensor is designed for a wide array of human body detection applications and wearable intelligent systems. Full article

Saline–alkali (SA) stress is an abiotic stress that exists widely in the natural environment, seriously affecting the growth and development of crops. Tiger nut (Cyperus esculentus L.), a perennial herb of Cyperus in Cyperaceae, is considered a pioneer crop for growing and improving SA land due to its excellent adaptability and SA tolerance. This study is the first to evaluate the SA tolerance of tiger nut and the alleviative effects of nanomaterials (nano-selenium and multi-walled carbon nanotubes) and Arbuscular mycorrhizas (AMs) on SA stress. The results showed that the seedling fresh weight of tiger nut was the most suitable parameter to describe the dose–response effect of plant growth with increased SA concentration. Based on the log-logistic dose–response curve, the GR₅₀ values of NaCl and NaHCO₃ (the concentrations causing a 50% reduction in seedling fresh weight) were determined to be 163 mmol L⁻¹ and 63 mmol L⁻¹, respectively. Under these stresses, the exogenous application of MWCNTs at 100 mg L⁻¹ or Nano-Se at 10 mg L⁻¹ showed that the effect of SA on tiger nut was alleviated. Field evaluation further showed that the exogenous application of MWCNTs, Nano-Se, or AMs could effectively alleviate SA stress on tiger nut. Compared to the untreated control, the application of these substances significantly improved the plant photosynthesis-related parameter, antioxidant enzyme activity, plant height (height: 66.0–69.9 cm), tuber yield (yield: 23.4–27.4 g plant⁻¹), and oil quality of tiger nut under SA stress. The results of this study indicate that the application of MWCNTs, Nano-Se, or AMs, to tiger nut can alleviate SA stress and maintain seed yield, providing the possibility of using these nanoparticles to improve the SA tolerance of tiger nut in agricultural practice. Full article

Anode catalysts are important for direct methanol fuel cells (DMFCs) of energy conversion. Herein, we report a novel strategy by ethylene glycol-based deep eutectic solvents (EG-DESs) for the fabrication of a multi-walled carbon nanotubes (MWCNTs)-supported Pt nanoparticles catalyst (referred to as Pt/CNTs-EG-DES). The Pt/CNTs-EG-DES catalyst provides an increased electrochemically active surface area (ECSA) and shows remarkably improved electrocatalytic performance towards methanol oxidation reaction compared to Pt/CNTs-W (fabricated in water) and commercial Pt/C catalysts. The improved performance is attributed to the generation of more Pt–O bonds which change the electronic states of the Pt atoms and the special node structure that obtains more active sites for a high CO resistance. This study suggests an effective synthesis strategy for Pt-based electrocatalysts with high performance for DMFC applications. Full article

In this work, multiwalled carbon nanotubes (MWCNTs) were melt-compounded into a novel thermal energy storage system consisting of a microencapsulated paraffin, with a melting temperature of 6 °C (M6D), dispersed within a flexible thermoplastic polyurethane (TPU) matrix. The resulting materials were then processed via Fused Filament Fabrication (FFF), and their thermo-mechanical properties were comprehensively evaluated. After an optimization of the processing parameters, good adhesion between the polymeric layers was obtained. Field-Emission Scanning Electron Microscopy (FESEM) images of the 3D-printed samples highlighted a uniform distribution of the microcapsules within the polymer matrix, without an evident MWCNT agglomeration. The thermal energy storage/release capability provided by the paraffin microcapsules, evaluated through Differential Scanning Calorimetry (DSC), was slightly lowered by the FFF process but remained at an acceptable level (i.e., >80% with respect to the neat M6D capsules). The novelty of this work lies in the successful integration of MWCNTs and PCMs into a TPU matrix, followed by 3D printing via FFF technology. This approach combines the high thermal conductivity of MWCNTs with the thermal energy storage capabilities of PCMs, creating a multifunctional nanocomposite material with unique thermal management properties. Full article

Detecting urea is crucial for diagnosing related health conditions and ensuring timely medical intervention. The addition of machine learning (ML) technologies has completely changed the field of biochemical sensing, providing enhanced accuracy and reliability. In the present work, an ML-assisted screen-printed, flexible, electrochemical, non-enzymatic biosensor was proposed to quantify urea concentrations. For the detection of urea, the biosensor was modified with a multi-walled carbon nanotube-zinc oxide (MWCNT-ZnO) nanocomposite functionalized with copper oxide (CuO) micro-flowers (MFs). Further, the CuO-MFs were synthesized using a standard sol-gel approach, and the obtained particles were subjected to various characterization techniques, including X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and Fourier transform infrared (FTIR) spectroscopy. The sensor’s performance for urea detection was evaluated by assessing the dependence of peak currents on analyte concentration using cyclic voltammetry (CV) at different scan rates of 50, 75, and 100 mV/s. The designed non-enzymatic biosensor showed an acceptable linear range of operation of 0.5–8 mM, and the limit of detection (LoD) observed was 78.479 nM, which is well aligned with the urea concentration found in human blood and exhibits a good sensitivity of 117.98 mA mM⁻¹ cm⁻². Additionally, different regression-based ML models were applied to determine CV parameters to predict urea concentrations experimentally. ML significantly improves the accuracy and reliability of screen-printed biosensors, enabling accurate predictions of urea levels. Finally, the combination of ML and biosensor design emphasizes not only the high sensitivity and accuracy of the sensor but also its potential for complex non-enzymatic urea detection applications. Future advancements in accurate biochemical sensing technologies are made possible by this strong and dependable methodology. Full article

The exponential demand for real-time monitoring applications has altered the course of sensor development, from sensor electronics miniaturization, e.g., resorting to printing techniques, to low-cost, flexible and functional wearable materials. Humidity sensing has been used in the prevention and diagnosis of medical conditions, as well as in the assessment of physical comfort. This paper presents a resistive flexible humidity sensor composed of silver interdigitated electrodes (IDTs) screen printed onto polyimide film and an active layer of multiwall carbon nanotubes (MWCNT) dispersed in a water-soluble polymer, polyvinyl alcohol (PVA). Different MWCNT/PVA sensor sizes and MWCNT percentages are tested to study their effect on the initial electrical resistance (R_i) values and sensor response at different humidity percentages. The results show that the R_i values decrease with the increase in % MWCNT. The sensor size did not influence the sensor response, while the % MWCNT affected the sensor behavior upon relative humidity (RH) increments. The 1% MWCNT/PVA sensor showed the best response, reaching a relative electrical resistance, ΔR/R₀, of 509% at 99% RH. Comparable with other reported sensors, the produced MWCNT/PVA flexible sensor is simpler, greener and shows a good sensitivity to humidity, being easily incorporated in wearable monitoring applications, from sports to medical fields. Full article

Recent observations of superconductivity in low-dimensional systems composed of twisted, untwisted, or rhombohedral graphene have attracted significant attention. One-dimensional moiré superlattices and flat bands have interestingly been identified in collapsed chiral carbon nanotubes (CNTs), opening up new avenues for the tunability of the electronic properties in these systems. The nucleation of hexagonal moiré superlattices and other types of stacking faults has also been demonstrated in partially collapsed and uncollapsed carbon nano-onions (CNOs). Here, we report a novel investigation on the dynamics of stacking fault nucleation within the multilayered lattices of micrometer-scale vertically oriented films of multiwall CNTs (MWCNTs), resulting from the pyrolysis of molecular precursors consisting of ferrocene or dimethyl ferrocene, at low vapor flow rates of ~5–20 mL/min. Interestingly, local nucleation of moiré-like superlattices (as stacking faults) was found when employing dimethyl ferrocene as the pyrolysis precursor. The morphological and structural properties of these systems were investigated with the aid of scanning and transmission electron microscopies, namely SEM, TEM, and HRTEM, as well as X-ray diffraction (XRD) and Raman point/mapping spectroscopy. Deconvolution analyses of the Raman spectra also demonstrated a local surface oxidation, possibly occurring on defect-rich interfaces, frequently identified within or in proximity of bamboo-like graphitic caps. By employing high-temperature Raman spectroscopy, we demonstrate a post-growth re-graphitization, which may also be visualized as an alternative way of depleting the oxygen content within the MWCNTs’ interfaces through recrystallization. Full article

This study investigates the process of using multi-walled carbon nanotube (MWCNT) coatings to enhance lamp heating temperatures for solar thermal absorption applications. The primary focus is studying the effects of the self-organized honeycomb structures of CNTs formed on silicon substrates on different cell area ratios (CARs). The drop-casting process was used to develop honeycomb-structured MWCNT-coated absorbers with varying CAR values ranging from ~60% to 17%. The optical properties were investigated within the visible (400–800 nm) and near-infrared (934–1651 nm) wavelength ranges. Although fully coated MWCNT absorbers showed the lowest reflectance, honeycomb structures with a ~17% CAR achieved high-temperature absorption. These structures maintained 8.4% reflectance at 550 nm, but their infrared reflection dramatically increased to 80.5% at 1321 nm. The solar thermal performance was assessed throughout a range of irradiance intensities, from 0.04 W/cm² to 0.39 W/cm². The honeycomb structure with a ~17% CAR value consistently performed better than the other structures by reaching the highest absorption temperatures (ranging from 52.5 °C to 285.5 °C) across all measured intensities. A direct correlation was observed between the reflection ratio (visible: 550 nm/infrared: 1321 nm) and the temperature absorption efficiency, where lower reflection ratios were associated with higher temperature absorption. This study highlights the significant potential for the large-scale production of cost-effective solar thermal absorbers through the application of optimized honeycomb-structured absorbers coated with MWCNTs. These contributions enhance solar energy efficiency for applications in water heating and purification, thereby promoting sustainable development. Full article

One of the ways to turn concrete into smart concrete involves the incorporation of conductive fillers. These fillers should be evenly distributed in the matrix to enable the charge propagation necessary for sensing. To homogenize the mixture, typical surface-active chemical compounds are routinely employed. Unfortunately, their presence often negatively impacts the characteristics of concrete. In this work, we show that conductive multi-walled carbon nanotubes (MWCNTs) can be included in the concrete matrix by using off-the-shelf lignosulfonate-based plasticizers. These plasticizers showed a much-improved capability to disperse MWCNTs compared to other routinely used surfactants. They also prevented a significant deterioration of the consistency of the mixture and inhibited the acceleration of the hydration process by MWCNTs. In concretes with MWCNTs and lignosulfonate-based plasticizers, the mechanical properties were largely preserved, while the nanocomposite became electrically conductive. Consequently, it enabled evaluation of the condition of the material by electrical impedance measurements. Full article

The field of nanotechnology has experienced exponential growth, with the unique properties of nanomaterials (NMs) being employed to enhance a wide range of products across diverse industrial sectors. This study examines the toxicity of metal- and carbon-based NMs, with a particular focus on titanium dioxide (TiO₂), zinc oxide (ZnO), silica (SiO₂), cerium oxide (CeO₂), silver (Ag), and multi-walled carbon nanotubes (MWCNTs). The potential health risks associated with increased human exposure to these NMs and their effect on the respiratory, gastrointestinal, dermal, and immune systems were evaluated using in vitro assays. Physicochemical characterisation of the NMs was carried out, and in vitro assays were performed to assess the cytotoxicity, genotoxicity, reactive oxygen species (ROS) production, apoptosis/necrosis, and inflammation in cell lines representative of the systems evaluated (3T3, Caco-2, HepG2, A549, and THP-1 cell lines). The results obtained show that 3T3 and A549 cells exhibit high cytotoxicity and ROS production after exposure to ZnO NMs. Caco-2 and HepG2 cell lines show cytotoxicity when exposed to ZnO and Ag NMs and oxidative stress induced by SiO₂ and MWCNTs. THP-1 cell line shows increased cytotoxicity and a pro-inflammatory response upon exposure to SiO₂. This study emphasises the importance of conducting comprehensive toxicological assessments of NMs given their physicochemical interactions with biological systems. Therefore, it is of key importance to develop robust and specific methodologies for the assessment of their potential health risks. Full article