Search Results (20)

The results of first-principles calculations of the structural, electronic, elastic, vibrational, dielectric and optical properties, as well as the Raman and infrared (IR) spectra, of potassium hexafluorosilicate (K₂SiF₆; KSF) crystal are discussed. KSF doped with manganese atoms (KSF:Mn⁴⁺) is known for its ability to function as a phosphor in white LED applications due to the efficient red emission from Mn⁴⁺ activator ions. The simulations were performed using the CRYSTAL23 computer code within the linear combination of atomic orbitals (LCAO) approximation of the density functional theory (DFT). For the study of KSF, we have applied and compared several DFT functionals (with emphasis on hybrid functionals) in combination with Gaussian-type basis sets. In order to determine the optimal combination for computation, two types of basis sets and four different functionals (three advanced hybrid—B3LYP, B1WC, and PBE0—and one LDA functional) were used, and the obtained results were compared with available experimental data. For the selected basis set and functional, the above-mentioned properties of KSF were calculated. In particular, the B1WC functional provides us with a band gap of 9.73 eV. The dependencies of structural, electronic and elastic parameters, as well as the Debye temperature, on external pressure (0–20 GPa) were also evaluated and compared with previous calculations. A comprehensive analysis of vibrational properties was performed for the first time, and the influence of isotopic substitution on the vibrational frequencies was analyzed. IR and Raman spectra were simulated, and the calculated Raman spectrum is in excellent agreement with the experimental one. Full article

By using DFT simulations employing the GGA/PBE and LDA/CA-PZ approximations, the effects of the Hubbard U correction on the crystal structure, electronic properties, and chemical bands of the cubic phase (Pm3¯m) of STO were investigated. Our findings showed that the cubic phase (Pm3¯m) STO’s band gaps and lattice parameters/volume are in reasonably good accordance with the experimental data, supporting the accuracy of our model. By applying the DFT + U method, we were able to obtain band gaps that were in reasonably good agreement with the most widely used experimental band gaps of the cubic (Pm3¯m) phase of STO, which are 3.20 eV, 3.24 eV, and 3.25 eV. This proves that the Hubbard U correction can overcome the underestimation of the band gaps induced by both GGA/PBE and LDA/CA-PZ approximations. On the other hand, the Sr-O and Ti-O bindings appear predominantly ionic and covalent, respectively, based on the effective valence charges, electron density distribution, and partial density of states analyses. In an attempt to enhance the performance of STO for new applications, these results might also be utilized as theoretical guidance, benefitting from our precise predicted values of the gap energies of the cubic phase (Pm3¯m). Full article

A new polymorphic modification of lanthanum sulfate was obtained by thermal dehydration of the respective nonahydrate. According to powder X-ray diffraction, it was established that β-La₂(SO₄)₃ crystallized in the C2/c space group of the monoclinic system with the KTh₂(PO₄)₃ structure type (a = 17.6923(9), b = 6.9102(4), c = 8.3990(5) Å, β = 100.321(3)°, and V = 1010.22(9) ų). Temperature dependency studies of the unit cell parameters indicated almost zero expansion along the a direction in the temperature range of 300–450 K. Presumably, this occurred due to stretching of the [LaO₉]_n chains along the c direction, which occurred without a significant alteration in the layer thickness over the a direction. A systematic study of the formation and destruction processes of the lanthanum sulfates under heating was carried out. In particular, the decisive impact of the chemical composition and formation energy of compounds on the thermodynamic and kinetic parameters of the processes was established. DFT calculations showed β-La₂(SO₄)₃ to be a dielectric material with a bandgap of more than 6.4 eV. The processing of β-La₂(SO₄)₃ with the Kubelka–Munk function exhibited low values below 6.4 eV, which indicated a fundamental absorption edge above this energy that was consistent with LDA calculations. The Raman and infrared measurements of β-La₂(SO₄)₃ were in accordance with the calculated spectra, indicating that the obtained crystal parameters represented a reliable structure. Full article

We studied the interaction between the L-ascorbic acid C₆H₈O₆ and the HO₂ hydroperoxyl radical, using DFT ab initio methods. The purpose of this study is to explore whether the L-ascorbic acid would be able to interact with and possibly reduce the hydroperoxyl radical. We performed static calculations consisting of structural optimizations, using the pseudopotential formalism and the LDA, PBE, and BLYP density functional approximations, including van der Waals corrections. For all the cases considered, we found an interaction between C₆H₈O₆ and HO₂, reporting recovery times and absorption energies consistent with a physisorption process and confirming the ability of the L-ascorbic acid to act as a sensor of the HO₂ radical. Full article

In this theoretical study, we investigate the effect of electron correlations on the electronic structure and magnetic properties of the full Heusler alloy Mn2NiAl in the framework of first-principles calculations. We investigate the electron correlation effect as employed within hybrid functional (HSE) and also within the DFT+U method with varied values of parameters between 0.9 and 6 eV. The XA-crystal structure was investigated with antiferromagnetic orderings of the magnetic moments of the manganese. It was found that with a growth of the Coulomb interaction parameter, the manganese ions magnetic moment increases, and it reaches the value of 4.15–4.46 μB per Mn. In addition, the total magnetic moment decreases because of the AFM ordering of the Mn ions and a small magnetic moment of Ni. The calculated total magnetic value agrees well with recent experiments demonstrating a low value of magnetization. This experimental value is most closely reproduced for the moderate values of the Coulomb parameter, also calculated in constrained LDA, while previous DFT studies substantially overestimated this value. It is also worth noticing that for all values of the Coulomb interaction parameter, this compound remains metallic in its electronic structure in agreement with transport measurements. Full article

In this review, we consider state-of-the-art density functional theory (DFT) investigations of strongly correlated systems performed with the meta-generalized gradient approximation (meta-GGA) strongly constrained and appropriately normed (SCAN) functional during the last five years. The study of such systems in the framework of the DFT is complicated because the well-known exchange–correlation functionals of the local density approximation (LDA) and generalized gradient approximation (GGA) families are not designed for strong correlations. The influence of the exchange–correlation effects beyond classical LDA and GGA are considered in view of the prediction of the ground state structural, magnetic, and electronic properties of the magnetic materials, including pure metals, binary compounds, and multicomponent Heusler alloys. The advantages of SCAN and points to be enhanced are discussed in this review with the aim of reflecting the modern state of computational materials science. Full article

The first-principle calculation method based on the density functional theory (DFT) in combination with the LDA+U algorithm is employed to study the electronic structure and magnetic properties of Co/Mn co-doped ZnO nanowires. Special attention is paid to the optimal geometric replacement position, the coupling mechanism, and the magnetic origin of Co/Mn atoms. According to the simulation data, Co/Mn co-doped ZnO nanowires of all configurations exhibit ferromagnetism, and substitution of Co/Mn atoms for Zn in the (0001) inner layer brings nanowires to the ground state. In the magnetic coupling state, the obvious spin splitting is detected near the Fermi level, and strong hybridization effects are observed between the Co/Mn 3d and O 2p states. Moreover, the ferromagnetic ordering forming Co²⁺-O²⁻-Mn²⁺ magnetic path is established. In addition, the calculation results suggest that the magnetic moment mainly takes its origin from the Co/Mn 3d orbital electrons, and the size of the magnetic moment is related to the electronic configurations of Co/Mn atoms. Therefore, a realistic description of the electronic structure of Co/Mn co-doped ZnO nanowires, obtained via LDA+U method, shows their potential for diluted magnetic semiconductor materials. Full article

We present results from ab initio, self-consistent calculations of electronic, transport, and bulk properties of cubic magnesium silicide (Mg₂Si). We employed a local density approximation (LDA) potential to perform the computation, following the Bagayoko, Zhao, and Williams (BZW) method, as improved by Ekuma and Franklin (BZW-EF). The BZW-EF method guarantees the attainment of the ground state as well as the avoidance of over-complete basis sets. The ground state electronic energies, total and partial densities of states, effective masses, and the bulk modulus are investigated. As per the calculated band structures, cubic Mg₂Si has an indirect band gap of 0.896 eV, from Γ to X, for the room temperature experimental lattice constant of 6.338 Å. This is in reasonable agreement with the experimental value of 0.8 eV, unlike previous ab initio DFT results of 0.5 eV or less. The predicted zero temperature band gap of 0.965 eV, from Γ to X, is obtained for the computationally determined equilibrium lattice constant of 6.218 Å. The calculated value of the bulk modulus of Mg₂Si is 58.58 GPa, in excellent agreement with the experimental value of 57.03 ± 2 GPa. Full article

The effect of structural relaxations on the magnetocrystalline anisotropy energy (MAE) was investigated by using density functional theory (DFT). The theory of the impact of magnetostructural coupling on the MAE was discussed, including the effects on attempt frequency. The MAE for ferromagnetic FePt (3.45 meV/formula unit) and antiferromagnetic PtMn (0.41 meV/formula unit) were calculated within the local density approximation (LDA). The effects of the structural relaxation were calculated and found to give a <0.5% reduction to the MAE for the ferromagnet and ∼20% for the antiferromagnet. Full article

The layer-structured monoclinic Li₂MnO₃ is a key material, mainly due to its role in Li-ion batteries and as a precursor for adsorbent used in lithium recovery from aqueous solutions. In the present work, we used first-principles calculations based on density functional theory (DFT) to study the crystal structure, optical phonon frequencies, infra-red (IR), and Raman active modes and compared the results with experimental data. First, Li₂MnO₃ powder was synthesized by the hydrothermal method and successively characterized by XRD, TEM, FTIR, and Raman spectroscopy. Secondly, by using Local Density Approximation (LDA), we carried out a DFT study of the crystal structure and electronic properties of Li₂MnO₃. Finally, we calculated the vibrational properties using Density Functional Perturbation Theory (DFPT). Our results show that simulated IR and Raman spectra agree well with the observed phonon structure. Additionally, the IR and Raman theoretical spectra show similar features compared to the experimental ones. This research is useful in investigations involving the physicochemical characterization of Li₂MnO₃ material. Full article

We carried out a density functional theory (DFT) study of the electronic and related properties of zinc blende indium arsenide (zb-InAs). These related properties include the total and partial densities of states and electron and hole effective masses. We utilized the local density approximation (LDA) potential of Ceperley and Alder. Instead of the conventional practice of performing self-consistent calculations with a single basis set, albeit judiciously selected, we do several self-consistent calculations with successively augmented basis sets to search for and reach the ground state of the material. As such, our calculations strictly adhere to the conditions of validity of DFT and the results are fully supported by the theory, which explains the agreement between our findings and corresponding, experimental results. Indeed, unlike some 21 previous ab initio DFT calculations that reported zb-InAs band gaps that are negative or zero, we found the room temperature measured value of 0.360 eV. It is a clear achievement to reproduce not only the locations of the peaks in the valence band density of states, but also the measured values of the electron and hole effective masses. This agreement with experimental results underscores not only the correct description of the band gap, but also of the overall structure of the bands, including their curvatures in the vicinities of the conduction band minimum (CBM) and of the valence band maximum (VBM). Full article

Silicon borides represent very appealing industrial materials for research owing to their remarkable features, and, together with other boride and carbide-based materials, have very wide applications. Various Si–B phases have been investigated in the past, however a limited number of studies have been done on the pristine SiB₆ compound. Structure prediction using a data mining ab initio approach has been performed in pure silicon hexaboride. Several novel structures, for which there are no previous experimental or theoretical data, have been discovered. Each of the structure candidates were locally optimized on the DFT level, employing the LDA-PZ and the GGA-PBE functional. Mechanical and elastic properties for each of the predicted and experimentally observed modifications have been investigated in great detail. In particular, the ductility/brittleness relationship, the character of the bonding, Young’s modulus E, bulk modulus B, and shear modulus K, including anisotropy, have been calculated and analyzed. Full article

Hydrogenated small fullerenes (C_n, n < 60) are of interest as potential astrochemical species, and as intermediates in hydrogen-catalysed fullerene growth. However, the computational identification of key stable species is difficult due to the vast configurationally space of structures. In this study, we explored routes to predict stable hydrogenated small fullerenes. We showed that neither local fullerene geometry nor local electronic structure analysis was able to correctly predict subsequent low-energy hydrogenation sites, and sequential stable addition searches also sometimes failed to identify most stable hydrogenated fullerene isomers. Of the empirical and semi-empirical methods tested, GFN2-xTB consistently gave highly accurate energy correlations (r > 0.99) to full DFT-LDA calculations at a fraction of the computational cost. This allowed identification of the most stable hydrogenated fullerenes up to 4H for four fullerenes, namely two isomers of C₂₈ and C₄₀, via “brute force” systematic testing of all symmetry-inequivalent combinations. The approach shows promise for wider systematic studies of smaller hydrogenated fullerenes. Full article

We report the results from self-consistent calculations of electronic, transport, and bulk properties of beryllium sulfide (BeS) in the zinc-blende phase, and employed an ab-initio local density approximation (LDA) potential and the linear combination of atomic orbitals (LCAO). We obtained the ground state properties of zb-BeS with the Bagayoko, Zhao, and Williams (BZW) computational method, as enhanced by Ekuma and Franklin (BZW-EF). Our findings include the electronic energy bands, the total (DOS) and partial (pDOS) densities of states, electron and hole effective masses, the equilibrium lattice constant, and the bulk modulus. The calculated band structure clearly shows that zb-BeS has an indirect energy band gap of 5.436 eV, from Γ to a point between Γ and X, for an experimental lattice constant of 4.863 Å. This is in excellent agreement with the experiment, unlike the findings of more than 15 previous density functional theory (DFT) calculations that did not perform the generalized minimization of the energy functional, required by the second DFT theorem, which is inherent to the implementation of our BZW-EF method. Full article

Phosgene (COCl₂), a valuable industrial compound, maybe a public safety and health risk due to potential abuse and possible accidental spillage. Conventional techniques suffer from issues related to procedural complexity and sensitivity. Therefore, there is a need for the development of simple and highly sensitive techniques that overcome these challenges. Recent advances in nanomaterials science offer the opportunity for the development of such techniques by exploiting the unique properties of these nanostructures. In this study, we investigated the potential of six types of nanomaterials: three carbon-based ([5,0] CNT, C60, C70) and three boron nitride-based (BNNT, BN60, BN70) for the detection of COCl₂. The local density approximation (LDA) approach of the density functional theory (DFT) was used to estimate the adsorption characteristics and conductivities of these materials. The results show that the COCl₂ molecule adsorbed spontaneously on the Fullerene or nanocages and endothermically on the pristine zigzag nanotubes. Using the magnitude of the bandgap modulation, the order of suitability of the different nanomaterials was established as follows: PBN60 (0.19%) < PC70 (1.39%) < PC60 (1.77%) < PBNNT (27.64%) < PCNT (65.29%) < PBN70 (134.12%). Since the desired criterion for the design of an electronic device is increased conductivity after adsorption due to the resulting low power consumption, PC60 was found to be most suitable because of its power consumption as it had the largest decrease of 1.77% of the bandgap. Full article