Hauptseite > The NA62 spectrometer acquisition system |
Article | |
Title | The NA62 spectrometer acquisition system |
Author(s) | Azorskiy, N (Dubna, JINR) ; Ceccucci, A (CERN) ; Bendotti, J (CERN) ; Danielsson, H (CERN) ; Degrange, J (CERN) ; Dixon, N (CERN) ; Elsha, V (Dubna, JINR) ; Enik, T (Dubna, JINR) ; Glonti, L (Dubna, JINR) ; Gusakov, Y (Dubna, JINR) ; Kakurin, S (Dubna, JINR) ; Kekelidze, V (Dubna, JINR) ; Kislov, E (Dubna, JINR) ; Kolesnikov, A (Dubna, JINR) ; Koval, M (Comenius U.) ; Lichard, P (CERN) ; Madigozhin, D (Dubna, JINR) ; Morant, J (CERN) ; Movchan, S (Dubna, JINR) ; Gomez, F Perez (CERN) ; Palladino, V (CERN) ; Polenkevich, I (Dubna, JINR) ; Potrebenikov, Y (Dubna, JINR) ; Ruggiero, G (CERN) ; Samsonov, V (Dubna, JINR) ; Shkarovskiy, S (Dubna, JINR) ; Sotnikov, A (Dubna, JINR) |
Publication | 2016 |
Number of pages | 10 |
In: | JINST 11 (2016) C02064 |
In: | Topical Workshop on Electronics for Particle Physics, Lisbon, Portugal, 28 Sep - 2 Oct 2015, pp.C02064 |
DOI | 10.1088/1748-0221/11/02/C02064 |
Subject category | Detectors and Experimental Techniques |
Accelerator/Facility, Experiment | CERN SPS ; NA62 |
Abstract | The NA62 low mass spectrometer consists of 7000 straw tubes operating in vacuum. The front-end electronics is directly mounted on the detector and connected by a flexible PCB. The front-end board provides the amplification, shaping, discrimination and time measurements of the analogue signals from 16 channels. After digitisation the data is sent to a VME 9U read-out board. The data, once matched with the trigger, is sent to the next step and used by the trigger level 1 algorithm. The front-end and read-out systems of the detector will be presented along with the first results of the detector performances. |
Copyright/License | publication: © 2016-2024 CERN (License: CC-BY-3.0) cc-by |