-
Transmission of a Pressure Signal through a Confined Bubble Array
Authors:
Edgar Ortega-Roano,
Devaraj van der Meer
Abstract:
Pressure changes travel at an infinite sound speed in an incompressible ideal fluid, opposite to what happens in a bubbly liquid, where the presence of bubbles adds compressibility such that the sound speed becomes finite. Here, the transmission of a pressure signal through a confined bubble array is studied numerically. An axisymmetric Boundary Integral (BI) code was used to simulate a horizontal…
▽ More
Pressure changes travel at an infinite sound speed in an incompressible ideal fluid, opposite to what happens in a bubbly liquid, where the presence of bubbles adds compressibility such that the sound speed becomes finite. Here, the transmission of a pressure signal through a confined bubble array is studied numerically. An axisymmetric Boundary Integral (BI) code was used to simulate a horizontal array of spherical bubbles inside a cylindrical container. On one end of the container, a piston is able to move in either a sinusoidal or impulsive way to excite the bubbles, whereas the other end of the cylinder is fixed. A one-dimensional model, hereafter called the Multiple Bagnold Problem (MBP) model, was developed to predict the behavior of the 3D system. A good agreement between the model and the simulations was found for initial excitation times and qualitatively good agreement for later times. The MBP model was subsequently used to obtain an expression for the sound speed in monodisperse systems, which depends on the ratio between the driving and the natural bubble frequency. Two regimes were found, one where the pressure signal travels unattenuated and the other where attenuation is present. Subsequently we turn to more complex, bidisperse systems, where the influence of the presence of bubbles of two different sizes is explored. Analytical expressions to predict the eigenfrequencies were obtained for monodisperse and bidisperse alternating systems. For bidisperse stacked systems the eigenfrequencies were computed numerically giving a good agreement with the MBP simulations. Finally, we discuss the propagation of a pressure signal through a polydisperse system.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Short-Time Force Response during the Impact of a Droplet with Gas Bubbles
Authors:
Edgar Ortega-Roano,
Devaraj van der Meer
Abstract:
The presence of gas or vapour bubbles may strongly influence the forces that occur during the impact of a liquid mass onto a solid. Here, we study this effect numerically, in a well-controlled manner, by simulating the short-time interaction between an impacting droplet and a solid surface, mediated by the gas layer between droplet and solid just before collision, in the presence and absence of bu…
▽ More
The presence of gas or vapour bubbles may strongly influence the forces that occur during the impact of a liquid mass onto a solid. Here, we study this effect numerically, in a well-controlled manner, by simulating the short-time interaction between an impacting droplet and a solid surface, mediated by the gas layer between droplet and solid just before collision, in the presence and absence of bubbles. A boundary integral method is used to simulate the falling droplet, the mediating air layer is modeled using lubrication theory, whereas uniform gas bubbles are added to the droplet that obey a polytropic equation of state. We show that the presence of gas bubbles inside the droplet can have a significant influence on the force exerted on the substrate, even before touchdown. This is due to the transmission of load from the solid, through the gas layer and finally into the bubbly droplet, buffering the impact. We simulate different bubble configurations, modifying their number, size, shape and initial position. It is found that larger bubbles, as well as those close to the impact zone, dampen the collision more as compared to small bubbles or the ones that are far from the droplet's surface. In addition, multiple small bubbles are shown to have a similar or even greater effect as a single large bubble.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Clogging of non-cohesive suspensions through constrictions using an efficient unresolved CFD-DEM solver
Authors:
Edgar Ortega-Roano,
Mathieu Souzy,
Thomas Weinhart,
Devaraj van der Meer,
Alvaro Marin
Abstract:
When objects are forced to flow through constrictions their transport can be frustrated temporarily or permanently due to the formation of arches in the region of the bottleneck. While such systems have been intensively studied in the case of solid particles in a gas phase being forced by gravitational forces, the case of solid particles suspended in a liquid phase, forced by the liquid itself, ha…
▽ More
When objects are forced to flow through constrictions their transport can be frustrated temporarily or permanently due to the formation of arches in the region of the bottleneck. While such systems have been intensively studied in the case of solid particles in a gas phase being forced by gravitational forces, the case of solid particles suspended in a liquid phase, forced by the liquid itself, has received much less attention. In this case, the influence of the liquid flow on the transport efficiency is not well understood yet, leading to several apparently trivial, but yet unanswered questions, e.g., would an increase of the liquid flow improve the transport of particles or worsen it? Although some experimental data is already available, it lacks enough detail to give a complete answer to such a question. Numerical models would be needed to scrutinize the system deeper. In this paper, we study this system making use of an advanced discrete particle solver (MercuryDPM) and an approximated numerical model for the liquid drag and compare the results with experimental data.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
Autothermotaxis of volatile drops
Authors:
Pallav Kant,
Mathieu Souzy,
Nayoung Kim,
Devaraj van der Meer,
Detlef Lohse
Abstract:
When a drop of a volatile liquid is deposited on a uniformly heated wettable, thermally conducting substrate, one expects to see it spread into a thin film and evaporate. Contrary to this intuition, due to thermal Marangoni contraction the deposited drop contracts into a spherical-cap-shaped puddle, with a finite apparent contact angle. Strikingly, this contracted droplet, above a threshold temper…
▽ More
When a drop of a volatile liquid is deposited on a uniformly heated wettable, thermally conducting substrate, one expects to see it spread into a thin film and evaporate. Contrary to this intuition, due to thermal Marangoni contraction the deposited drop contracts into a spherical-cap-shaped puddle, with a finite apparent contact angle. Strikingly, this contracted droplet, above a threshold temperature, well below the boiling point of the liquid, starts to spontaneously move on the substrate in an apparently erratic way. We describe and quantify this self-propulsion of the volatile drop. It arises due to spontaneous symmetry breaking of thermal-Marangoni convection, which is induced by the non-uniform evaporation of the droplet. Using infra-red imaging, we reveal the characteristic interfacial flow patterns associated with the Marangoni convection in the evaporating drop. A scaling relation describes the correlation between the moving velocity of the drop and the apparent contact angle, both of which increase with the substrate temperature.
△ Less
Submitted 19 June, 2023; v1 submitted 14 June, 2023;
originally announced June 2023.
-
Diffusive and convective dissolution of carbon dioxide in a vertical cylindrical cell
Authors:
Daniël P. Faasen,
Farzan Sepahi,
Dominik Krug,
Roberto Verzicco,
Pablo Peñas,
Detlef Lohse,
Devaraj van der Meer
Abstract:
The dissolution and subsequent mass transfer of carbon dioxide gas into liquid barriers plays a vital role in many environmental and industrial applications. In this work, we study the downward dissolution and propagation dynamics of CO2 into a vertical water barrier confined to a narrow vertical glass cylinder, using both experiments and direct numerical simulations. Initially, the dissolution of…
▽ More
The dissolution and subsequent mass transfer of carbon dioxide gas into liquid barriers plays a vital role in many environmental and industrial applications. In this work, we study the downward dissolution and propagation dynamics of CO2 into a vertical water barrier confined to a narrow vertical glass cylinder, using both experiments and direct numerical simulations. Initially, the dissolution of CO2 results in the formation of a CO2-rich water layer, which is denser in comparison to pure water, at the top gas-liquid interface. Continued dissolution of CO2 into the water barrier results in the layer becoming gravitationally unstable, leading to the onset of buoyancy driven convection and, consequently, the shedding of a buoyant plume. By adding sodium fluorescein, a pH-sensitive fluorophore, we directly visualise the dissolution and propagation of the CO2 across the liquid barrier. Tracking the CO2 front propagation in time results in the discovery of two distinct transport regimes, a purely diffusive regime and an enhanced diffusive regime. Using direct numerical simulations, we are able to successfully explain the propagation dynamics of these two transport regimes in this laterally strongly confined geometry, namely by disentangling the contributions of diffusion and convection to the propagation of the CO2 front.
△ Less
Submitted 19 June, 2023; v1 submitted 13 June, 2023;
originally announced June 2023.
-
Controlled and impulsive compression of an entrapped air bubble during impact
Authors:
Utkarsh Jain,
Devaraj van der Meer
Abstract:
Wave slamming onto a structure is often accompanied by the entrapment of an air pocket. A large scale impact typically has a rapidly evolving and disturbed liquid-gas interface, such that several bubbles are entrapped upon impact. While it is largely understood how the peak pressure is created by liquid coming into contact with the solid structure, it is more challenging to ascertain how an isolat…
▽ More
Wave slamming onto a structure is often accompanied by the entrapment of an air pocket. A large scale impact typically has a rapidly evolving and disturbed liquid-gas interface, such that several bubbles are entrapped upon impact. While it is largely understood how the peak pressure is created by liquid coming into contact with the solid structure, it is more challenging to ascertain how an isolated air pocket is pressurised by an impulsive impact, and how the maximum impact pressure inside this bubble evolves. We study such a Bagnold-type impulsive compression of an air bubble by performing well-controlled experiments, where we use an inverted, hollow cone as an impactor. The cone is kept immersed throughout in a water bath, such that it encloses an air bubble of known and controlled volume. A high-sensitivity sensor measures pressures at the vertex of the cone. Using high-speed imaging we show how incoming liquid deforms the air bubble enclosed in such a geometry, and how an impact peak is registered inside the bubble, which can be traced back to the impact of a liquid jet onto the pressure sensor. We compare the measured pressures to a Bagnold model, and discuss the dominant resonances in the bubble. From visualisations of the deforming bubble, we also discuss the air-pocket's deformations, resulting from the presence of surrounding rigid geometry (such as corrugations in an LNG containment membrane).
△ Less
Submitted 30 June, 2022;
originally announced June 2022.
-
Air-cushioning effect and Kelvin-Helmholtz instability before the slamming of a disk on water
Authors:
Utkarsh Jain,
Anais Gauthier,
Detlef Lohse,
Devaraj van der Meer
Abstract:
The macroscopic dynamics of a droplet impacting a solid is crucially determined by the intricate air dynamics occurring at the vanishingly small length scale between droplet and substrate prior to direct contact. Here we investigate the inverse problem, namely the role of air for the impact of a horizontal flat disk onto a liquid surface, and find an equally significant effect. Using an in-house e…
▽ More
The macroscopic dynamics of a droplet impacting a solid is crucially determined by the intricate air dynamics occurring at the vanishingly small length scale between droplet and substrate prior to direct contact. Here we investigate the inverse problem, namely the role of air for the impact of a horizontal flat disk onto a liquid surface, and find an equally significant effect. Using an in-house experimental technique, we measure the free surface deflections just before impact, with a precision of a few micrometers. Whereas stagnation pressure pushes down the surface in the center, we observe a lift-up under the edge of the disk, which sets in at a later stage, and which we show to be consistent with a Kelvin-Helmholtz instability of the water-air interface.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Slug bubble growth and dissolution by solute exchange
Authors:
Daniël P Faasen,
Devaraj van der Meer,
Detlef Lohse,
Pablo Peñas
Abstract:
In many environmental and industrial applications, the mass transfer of gases in liquid solvents is a fundamental process during the generation of bubbles for specific purposes or, vice versa, the removal of entrapped bubbles. We address the growth dynamics of a trapped slug bubble in a vertical glass cylinder under a water barrier. In the studied process, the ambient air atmosphere is replaced by…
▽ More
In many environmental and industrial applications, the mass transfer of gases in liquid solvents is a fundamental process during the generation of bubbles for specific purposes or, vice versa, the removal of entrapped bubbles. We address the growth dynamics of a trapped slug bubble in a vertical glass cylinder under a water barrier. In the studied process, the ambient air atmosphere is replaced by a CO$_2$ atmosphere at the same or higher pressure. The asymmetric exchange of the gaseous solutes between the CO$_2$-rich water barrier and the air-rich bubble always results in net bubble growth. We refer to this process as solute exchange. The dominant transport of CO$_2$ across the water barrier is driven by a combination of diffusion and convective dissolution. The experimental results are compared to and explained with a simple numerical model, with which the underlying mass transport processes are quantified. Analytical solutions that accurately predict the bubble growth dynamics are subsequently derived. The effect of convective dissolution across the water layer is treated as a reduction of the effective diffusion length, in accordance with the mass transfer scaling observed in laminar or natural convection. Finally, the binary water-bubble system is extended to a ternary water-bubble-alkane system. It is found that the alkane (n-hexadecane) layer bestows a buffering (hindering) effect on bubble growth and dissolution. The resulting growth dynamics and underlying fluxes are characterised theoretically.
△ Less
Submitted 17 November, 2021; v1 submitted 8 June, 2021;
originally announced June 2021.
-
Impact of a microfluidic jet onto a pendant droplet
Authors:
Miguel A. Quetzeri-Santiago,
Ian W. Hunter,
Devaraj van der Meer,
David Fernandez Rivas
Abstract:
High speed microfluidic jets can be generated by a thermocavitation process: from the evaporation of the liquid inside a microfluidic channel, a rapidly expanding bubble is formed and generates a jet through a flow focusing effect. Here, we study the impact and traversing of such jets on a pendant liquid droplet. Upon impact, an expanding cavity is created, and, above a critical impact velocity, t…
▽ More
High speed microfluidic jets can be generated by a thermocavitation process: from the evaporation of the liquid inside a microfluidic channel, a rapidly expanding bubble is formed and generates a jet through a flow focusing effect. Here, we study the impact and traversing of such jets on a pendant liquid droplet. Upon impact, an expanding cavity is created, and, above a critical impact velocity, the jet traverses the entire droplet. We predict the critical traversing velocity (i) from a simple energy balance and (ii) by comparing the Young-Laplace and dynamic pressures in the cavity that is created during impact. We contrast the model predictions against experiments, in which we vary the liquid properties of the pendant droplet and find good agreement. In addition, we asses how surfactants and viscoelastic effects influence the critical impact velocity. Our results are relevant for the study of needle-free injections, where jets of similar velocities and dimensions are being used. Given the simplicity of our system we can systematically vary the target properties and unravel their effect on the impact dynamics, a true challenge when injecting into real skin.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
Higher-order meniscus oscillations driven by flow-focusing leading to bubble pinch off and entrainment in a piezo acoustic inkjet nozzle
Authors:
Arjan Frates,
Maaike Rump,
Roger Jeurissen,
Marc van den Berg,
Youri de Loore,
Hans Reinten,
Herman Wijshoff,
Devaraj van der Meer,
Detlef Lohse,
Michel Versluis,
Tim Segers
Abstract:
The stability of high-end piezo-acoustic drop-on-demand (DOD) inkjet printing is sometimes compromised by the entrainment of an air bubble inside the ink channel. Here, bubble pinch-off from an acoustically driven meniscus is studied in an optically transparent DOD printhead as a function of the driving waveform. We show that bubble pinch-off follows from low-amplitude higher-order meniscus oscill…
▽ More
The stability of high-end piezo-acoustic drop-on-demand (DOD) inkjet printing is sometimes compromised by the entrainment of an air bubble inside the ink channel. Here, bubble pinch-off from an acoustically driven meniscus is studied in an optically transparent DOD printhead as a function of the driving waveform. We show that bubble pinch-off follows from low-amplitude higher-order meniscus oscillations on top of the global high-amplitude meniscus motion that drives droplet formation. In a certain window of control parameters, phase inversion between the low and high frequency components leads to the enclosure of an air cavity and bubble pinch-off. Although phenomenologically similar, bubble pinch-off is not a result of capillary wave interaction such as observed in drop impact on a liquid pool. Instead, we reveal geometrical flow focusing as the mechanism through which at first, an outward jet is formed on the retracted concave meniscus. When the subsequent high-frequency pressure wave hits the now toroidal-shaped meniscus, it accelerates the toroidal ring outward resulting in the formation of an air cavity that can pinch off. The critical control parameters for pinch off are the pulse timing and amplitude. To cure the bubble entrainment problem, the threshold for bubble pinch-off can be increased by suppressing the high frequency acoustic waves through appropriate waveform design. The present work therefore aids the improvement of the stability of inkjet printers through a physical understanding of meniscus instabilities.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Linear stability analysis of a time-divergent slamming flow
Authors:
Devaraj van der Meer
Abstract:
When a liquid slams into a solid, the intermediate gas is squeezed out at a speed that diverges when approaching the moment of impact. Although there is mounting experimental evidence that instabilities form on the liquid interface during such an event, understanding of the nature of these instabilities is limited. This study therefore addresses the stability of a liquid-gas interface with surface…
▽ More
When a liquid slams into a solid, the intermediate gas is squeezed out at a speed that diverges when approaching the moment of impact. Although there is mounting experimental evidence that instabilities form on the liquid interface during such an event, understanding of the nature of these instabilities is limited. This study therefore addresses the stability of a liquid-gas interface with surface tension, subject to a diverging flow in the gas phase, where the liquid and the gas phase are both represented as potential fluids. We perform a Kelvin-Helmholtz-type linear modal stability analysis of the surface to obtain an amplitude equation that is subsequently analysed in detail and applied to two cases of interest for impact problems, namely, the parallel impact of a wave onto a vertical wall, and the impact of a horizontal plate onto a liquid surface. In both cases we find that long wavelengths are stabilised considerably in comparison to what may be expected based upon classical knowledge of the stability of interfaces subject to a constant gas flow. In the former case, this leads to the prediction of a marginally stable wavelength that is completely absent in the classical analysis. For the latter we find much resemblance to the classical case, with the connotation that the instability is suppressed for smaller disk sizes. The study ends with a discussion of the influence of gas viscosity and gas compressibility on the respective stability diagrams.
△ Less
Submitted 22 November, 2021; v1 submitted 13 April, 2021;
originally announced April 2021.
-
Hydrogel sphere impact cratering, spreading and bouncing on granular media
Authors:
Xiaoyan Ye,
Devaraj van der Meer
Abstract:
The impact of a hydrogel sphere onto a granular target results in both the deformation of the sphere and the formation of a prominent topographic feature known as impact crater on the granular surface. We investigate the crater formation and scaling, together with the spreading diameter and post-impact dynamics of the spheres by performing a series of experiments, varying the Young's modulus $Y$ a…
▽ More
The impact of a hydrogel sphere onto a granular target results in both the deformation of the sphere and the formation of a prominent topographic feature known as impact crater on the granular surface. We investigate the crater formation and scaling, together with the spreading diameter and post-impact dynamics of the spheres by performing a series of experiments, varying the Young's modulus $Y$ and impact speed $U_{0}$ of the hydrogel spheres, and the packing fraction and grain size of the granular target. We determine how the crater diameter and depth depend on $Y$ and find the data to be consistent with those from earlier experiments using droplets and hard spheres. Most specifically, we find that the crater diameter data are consistent with a power law, where the power exponent changes more sharply when $Y$ becomes less than $200$ Pa. Next, we introduce an estimate for the portion of the impact kinetic energy that is stored in elastic energy during impact, and thus correct the energy that remains available for crater formation. Subsequently, we determine the deformation of the hydrogel sphere and find that the normalized spreading diameter data are well collapsed introducing an equivalent velocity from an energy balance of the the initial kinetic energy against surface and elastic energy. Finally, we observe that under certain intermediate values for the Young's modulus and impact velocities, the particles rebound from the impact crater. We determine the phase diagram and explain our findings from a comparison of the elastocapillary spreading time and the impact duration.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
Air Entrapment and its effect on Pressure Impulses in the slamming of a Flat Disc on Water
Authors:
Utkarsh Jain,
Patricia Vega-Martínez,
Devaraj van der Meer
Abstract:
The presence of ambient air in liquid-slamming events plays a crucial role in influencing the shape of the liquid surface prior to the impact, and the distribution of loads created upon impact. We study the effect of trapped air on impact loads in a simplified geometry, by slamming a horizontal flat disc onto a stationary water bath at a well-controlled velocity. We show how air trapping influence…
▽ More
The presence of ambient air in liquid-slamming events plays a crucial role in influencing the shape of the liquid surface prior to the impact, and the distribution of loads created upon impact. We study the effect of trapped air on impact loads in a simplified geometry, by slamming a horizontal flat disc onto a stationary water bath at a well-controlled velocity. We show how air trapping influences pressure peaks at different radial locations on the disc, how the pressure impulses are affected, and how local pressure impulses differ from those obtained from area-integrated (force) impulses at impact. More specifically, we find that the air layer causes a gradual buildup of the load before the peak value is reached, and show that this buildup follows inertial scaling. Further, the same localised pressure impulse at the disc centre are found to be lower than the corresponding (area-integrated) force impulse on the entire disc. While the (area-integrated) force impulses are close to the classical result of Batchelor (1967, section 6.10) and Glasheen & McMahon (1996), the localised pressure impulses at disc center, where the trapped air layer is at its thickest, are found to lie closer to the theoretical estimation by Peters et al. (2013) for an air-cushioned impact.
△ Less
Submitted 14 July, 2021; v1 submitted 18 December, 2020;
originally announced December 2020.
-
On wedge-slamming pressures
Authors:
Utkarsh Jain,
Vladimir Novakovic,
Hannes Bogaert,
Devaraj van der Meer
Abstract:
The water entry of a wedge has become a model test in marine and naval engineering research. Wagner theory, originating in 1932, predicts impact pressures, and accounts for contributions to the total pressure arising from various flow domains in the vicinity of the wetting region on the wedge. Here we study the slamming of a wedge and a cone at a constant, well-controlled velocity throughout the i…
▽ More
The water entry of a wedge has become a model test in marine and naval engineering research. Wagner theory, originating in 1932, predicts impact pressures, and accounts for contributions to the total pressure arising from various flow domains in the vicinity of the wetting region on the wedge. Here we study the slamming of a wedge and a cone at a constant, well-controlled velocity throughout the impact event using high fidelity sensors. Pressures at two locations on the impactor are measured during and after impact. Pressure time series from the two impactors are discussed using inertial pressure and time scales. The non-dimensionalised pressure time series are compared to sensor-integrated averaged composite Wagner solutions (Zhao & Faltinsen 1993), Logvinovich (1969, 4.7), modified Logvinovich (Korobkin & Malenica 2005) and generalised Wagner models (Korobkin 2004). In addition, we provide an independent experimental justification of approximations made in the literature in extending the Wagner model to three-dimensions. The second part of the paper deals with pre-impact air cushioning -- an important concern since it is responsible for determining the thickness of air layer trapped upon impact. Using a custom-made technique we measure the air-water interface dynamics as it responds to the build up of pressure in the air layer intervening in between the impactor and the free surface. We show both experimentally and using two-fluid boundary integral (BI) simulations, that the pre-impact deflection of the interface due to air-cushioning is fully described by potential flow.
△ Less
Submitted 11 December, 2021; v1 submitted 20 November, 2020;
originally announced November 2020.
-
Impact cratering in sand: Comparing solid and liquid intruders
Authors:
Rianne de Jong,
Song-Chuan Zhao,
Diana Garcia-Gonzalez,
Gijs Verduijn,
Devaraj van der Meer
Abstract:
How does the impact of a deformable droplet on a granular bed differ from that caused by a solid impactor of similar size and density? Here, we experimentally study this question and focus on the effect of intruder deformability on the crater shape. For comparable impact energies, we show that the crater diameter is larger for droplets than for solid intruders but that the impact of the latter res…
▽ More
How does the impact of a deformable droplet on a granular bed differ from that caused by a solid impactor of similar size and density? Here, we experimentally study this question and focus on the effect of intruder deformability on the crater shape. For comparable impact energies, we show that the crater diameter is larger for droplets than for solid intruders but that the impact of the latter results in deeper craters. Interestingly, for initially dense beds of packing fractions larger than 0.58, we find that the resultant excavated crater volume is independent of the intruder deformability, suggesting an impactor-independent dissipation mechanism within the sand for these dense beds.
△ Less
Submitted 7 November, 2020;
originally announced November 2020.
-
Total-internal-reflection deflectometry for measuring small deflections of a fluid surface
Authors:
Utkarsh Jain,
Anaïs Gauthier,
Devaraj van der Meer
Abstract:
We describe a method that uses total internal reflection at the water-air interface inside a large, transparent tank, to measure the interface's deflections. Using this configuration, we obtain an optical set-up where the liquid surface acts as a deformable mirror. The set-up is shown to be extremely sensitive to very small disturbances of the reflecting water surface, which are detected by means…
▽ More
We describe a method that uses total internal reflection at the water-air interface inside a large, transparent tank, to measure the interface's deflections. Using this configuration, we obtain an optical set-up where the liquid surface acts as a deformable mirror. The set-up is shown to be extremely sensitive to very small disturbances of the reflecting water surface, which are detected by means of visualising the reflections of a reference pattern. When the water surface is deformed, it reflects a distorted image of the reference pattern, similar to a synthetic Schlieren set-up. The distortions of the pattern are analysed using a suitable image correlation method. The displacement fields thus obtained correlate to the local spatial gradients of the water surface. The gradient fields are integrated in a least-squares sense to obtain a full instantaneous reconstruction of the water surface. This method is particularly useful when a solid object is placed just above water surface, whose presence makes the liquid surface otherwise optically inaccessible.
△ Less
Submitted 25 October, 2021; v1 submitted 1 September, 2020;
originally announced September 2020.
-
Dynamics of a toroidal bubble on a cylinder surface with an application to geophysical exploration
Authors:
Shuai Li,
Andrea Prosperetti,
Devaraj van der Meer
Abstract:
During the operation of a seismic airgun source, a certain amount of compressed high-pressure air is released from the airgun chamber into the surrounding water, generating an expanding toroidal bubble attached to the airgun-body. The subsequent oscillations of the bubble generate low-frequency pressure waves, which are used to map the ocean subbottom, e.g., to locate oil and gas reserves. The bub…
▽ More
During the operation of a seismic airgun source, a certain amount of compressed high-pressure air is released from the airgun chamber into the surrounding water, generating an expanding toroidal bubble attached to the airgun-body. The subsequent oscillations of the bubble generate low-frequency pressure waves, which are used to map the ocean subbottom, e.g., to locate oil and gas reserves. The bubble dynamic behavior and the emitted pressure waves are inevitably influenced by the airgun-body. However, the bubble-airgun-body interaction is far from well understood. This paper investigates the strong interaction between a long cylinder and an attached toroidal bubble via hundreds of boundary integral simulations, aiming to provide new physical insights for airgun-bubble dynamics. Firstly, the overall physical phenomena are discussed and three types of bubble collapse patterns are identified, namely (i) upward jetting due to gravity, (ii) annular jet toward the cylinder body and (iii) weak/no jet. Thereafter, we investigate the effects of the cylinder radius, initial bubble pressure and Froude number on the bubble oscillation period and the pressure wave induced by the bubble. At last, the impact of a cylinder on a Sercel type airgun-bubble is discussed with a particular focus on the spectrum of the pressure waves.
△ Less
Submitted 8 June, 2020;
originally announced June 2020.
-
Growth of a bubble cloud in CO2-saturated water in microgravity
Authors:
Patricia Vega-Martínez,
Javier Rodríguez-Rodríguez,
Devaraj van der Meer
Abstract:
The diffusion-driven growth of a dense cloud of bubbles immersed in a gas-supersaturated liquid is a problem that finds applications in several modern technologies such as solvent-exchange micro-reactors, nanotechnology or the manufacturing of foamy materials. However, under Earth's gravity conditions, these dynamics can only be observed for a very limited time if the cloud is not attached to a su…
▽ More
The diffusion-driven growth of a dense cloud of bubbles immersed in a gas-supersaturated liquid is a problem that finds applications in several modern technologies such as solvent-exchange micro-reactors, nanotechnology or the manufacturing of foamy materials. However, under Earth's gravity conditions, these dynamics can only be observed for a very limited time if the cloud is not attached to a surface, due to the action of buoyancy, i.e. of gravity effects. Here, we present experimental observations of the time evolution of dense bubble clouds growing in CO$_2$-supersaturated water in microgravity conditions. We report the existence of three regimes where the bubble cloud exhibits different growth rates. At short times, each bubble grows independently following the Epstein--Plesset equation. Later on, bubbles start to interact with each other and their growth rate diminishes as they compete for the available CO$_2$. When this happens, the growth rate slows down. This occurs earlier the deeper the bubble is in the cloud. Finally, at long times, only those bubbles on the husk continue growing. These regimes may be qualitatively described by a mathematical model where each individual bubble grows in the presence of a constellation of point mass sinks. Despite the model being only valid for dilute bubble clouds, its predictions are consistent with the experimental observations, even though the bubble clouds we observe are rather dense.
△ Less
Submitted 29 May, 2020;
originally announced May 2020.
-
Ultrasound-enhanced mass transfer during single-bubble diffusive growth
Authors:
Álvaro Moreno Soto,
Pablo Peñas,
Guillaume Lajoinie,
Detlef Lohse,
Devaraj van der Meer
Abstract:
Ultrasound is known to enhance surface bubble growth and removal in catalytic and microfluidic applications, yet the contributions of rectified diffusion and microstreaming phenomena towards mass transfer remain unclear. We quantify the effect of ultrasound on the diffusive growth of a single spherical CO$_2$ bubble growing on a substrate in supersaturated water. The time dependent bubble size, sh…
▽ More
Ultrasound is known to enhance surface bubble growth and removal in catalytic and microfluidic applications, yet the contributions of rectified diffusion and microstreaming phenomena towards mass transfer remain unclear. We quantify the effect of ultrasound on the diffusive growth of a single spherical CO$_2$ bubble growing on a substrate in supersaturated water. The time dependent bubble size, shape, oscillation amplitude and microstreaming flow field are resolved. We show and explain how ultrasound can enhance the diffusive growth of surface bubbles by up to two orders of magnitude during volumetric resonance. The proximity of the wall forces the bubble to oscillate non-spherically, thereby generating vigorous streaming during resonance that results in convection-dominated growth.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Modelling large scale airgun-bubble dynamics with highly non-spherical features
Authors:
Shuai Li,
Devaraj van der Meer,
A-Man Zhang,
Andrea Prosperetti,
Detlef Lohse
Abstract:
A thorough understanding of the dynamics of meter-sized airgun-bubbles is very crucial to seabed geophysical exploration. In this study, we use the boundary integral method to investigate the highly non-spherical airgun-bubble dynamics and its corresponding pressure wave emission. Moreover, a model is proposed to also consider the process of air release from the airgun port, which is found to be t…
▽ More
A thorough understanding of the dynamics of meter-sized airgun-bubbles is very crucial to seabed geophysical exploration. In this study, we use the boundary integral method to investigate the highly non-spherical airgun-bubble dynamics and its corresponding pressure wave emission. Moreover, a model is proposed to also consider the process of air release from the airgun port, which is found to be the most crucial factor to estimate the initial peak of the pressure wave. The numerical simulations show good agreement with experiments, in terms of non-spherical bubble shapes and pressure waves. Thereafter, the effects of the port opening time $T\rm_{open}$, airgun firing depth, heat transfer, and gravity are numerically investigated. We find that a smaller $T\rm_{open}$ leads to a more violent air release that consequently causes stronger high-frequency pressure wave emissions; however, the low-frequency pressure waves are little affected. Additionally, the non-spherical bubble dynamics is highly dependent on the Froude number $Fr$. Starting from $Fr=2$, as $Fr$ increases, the jet contains lower kinetic energy, resulting in a stronger energy focusing of the bubble collapse itself and thus a larger pressure peak during the bubble collapse phase. For $Fr \ge 7$, the spherical bubble theory becomes an appropriate description of the airgun-bubble. The new findings of this study may provide a reference for practical operations and designing environmentally friendly airguns in the near future.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
Inverse Leidenfrost drop manipulation using menisci
Authors:
Anaïs Gauthier,
Guillaume Lajoinie,
Jacco H. Snoeijer,
Devaraj van der Meer
Abstract:
Drops deposited on an evaporating liquid bath can be maintained in an inverse Leidenfrost state by the vapor emanating from the bath, making them levitate and hover almost without friction. These perfectly non-wetting droplets create a depression in the liquid interface that sustains their weight, which generates repellent forces when they approach a meniscus rising against a wall. Here, we study…
▽ More
Drops deposited on an evaporating liquid bath can be maintained in an inverse Leidenfrost state by the vapor emanating from the bath, making them levitate and hover almost without friction. These perfectly non-wetting droplets create a depression in the liquid interface that sustains their weight, which generates repellent forces when they approach a meniscus rising against a wall. Here, we study this reflection in detail, and show that frictionless Leidenfrost drops are a simple and efficient tool to probe the shape of an unknown interface. We then use the menisci to control the motion of the otherwise elusive drops. We create waveguides to direct and accelerate them and use parabolic walls to reflect and focus them. This could be particularly beneficial in the scale up of droplet cryopreservation processes: capillary interactions can be used to transport, gather and collect vitrified biological samples in absence of contact and contamination.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Gas bubble evolution on microstructured silicon substrates
Authors:
Peter van der Linde,
Pablo Peñas-López,
Álvaro Moreno Soto,
Devaraj van der Meer,
Detlef Lohse,
Han Gardeniers,
David Fernández Rivas
Abstract:
The formation, growth and detachment of gas bubbles on electrodes are omnipresent in electrolysis and other gas-producing chemical processes. To better understand their role in the mass transfer efficiency, we perform experiments involving successive bubble nucleations from a predefined nucleation site which consists of a superhydrophobic pit on top of a micromachined pillar. The experiments on bu…
▽ More
The formation, growth and detachment of gas bubbles on electrodes are omnipresent in electrolysis and other gas-producing chemical processes. To better understand their role in the mass transfer efficiency, we perform experiments involving successive bubble nucleations from a predefined nucleation site which consists of a superhydrophobic pit on top of a micromachined pillar. The experiments on bubble nucleation at these spots permit the comparison of mass transfer phenomena connected to electrolytically generated H$_2$ bubbles with the better-understood evolution of CO$_2$ bubbles in pressure-controlled supersaturated solutions. In both cases, bubbles grow in a diffusion-dominated regime. For CO$_2$ bubbles, it is found that the growth rate coefficient of subsequent bubbles always decreases due to the effect of gas depletion. In contrast, during constant current electrolysis, the bubble growth rates are affected by the evolution of a boundary layer of dissolved H$_2$ gas near the flat electrode which competes with gas depletion. This competition results in three distinct regimes. Initially, the bubble growth slows down with each new bubble in the succession due to the dominant depletion of the newly-formed concentration boundary layer. In later stages, the growth rate increases due to a local increase of gas supersaturation caused by the continuous gas production and finally levels off to an approximate steady growth rate. The gas transport efficiency associated with the electrolytic bubble succession follows a similar trend in time. Finally, for both H$_2$ and CO$_2$ bubbles, detachment mostly occurs at smaller radii than theory predicts and at a surprisingly wide spread of sizes. A number of explanations are proposed, but the ultimate origin of the spreading of the results remains elusive.
△ Less
Submitted 10 December, 2018;
originally announced January 2019.
-
The history effect on bubble growth and dissolution. Part 2. Experiments and simulations of a spherical bubble attached to a horizontal flat plate
Authors:
Pablo Peñas-López,
Álvaro Moreno Soto Miguel,
A. Parrales,
Devaraj van der Meer,
Detlef Lohse,
Javier Rodríguez-Rodríguez
Abstract:
The accurate description of the growth or dissolution dynamics of a soluble gas bubble in a super- or undersaturated solution requires taking into account a number of physical effects that contribute to the instantaneous mass transfer rate. One of these effects is the so-called history effect. It refers to the contribution of the local concentration boundary layer around the bubble that has develo…
▽ More
The accurate description of the growth or dissolution dynamics of a soluble gas bubble in a super- or undersaturated solution requires taking into account a number of physical effects that contribute to the instantaneous mass transfer rate. One of these effects is the so-called history effect. It refers to the contribution of the local concentration boundary layer around the bubble that has developed from past mass transfer events between the bubble and liquid surroundings. In Part 1 of this work \citep{penas2016}, a theoretical treatment of this effect was given for a spherical, isolated bubble. Here, Part 2 provides an experimental and numerical study of the history effect regarding a spherical bubble attached to a horizontal flat plate and in the presence of gravity. The simulation technique developed in this paper is based on a streamfunction--vorticity formulation that may be applied to other flows where bubbles or drops exchange mass in the presence of a gravity field. Using this numerical tool, simulations are performed for the same conditions used in the experiments, in which the bubble is exposed to subsequent growth and dissolution stages, using step-wise variations in the ambient pressure. Besides proving the relevance of the history effect, the simulations highlight the importance that boundary-induced advection has to accurately describe bubble growth and shrinkage, i.e. the bubble radius evolution. In addition, natural convection has a significant influence that shows up in the velocity field even at short times, though, given the supersaturation conditions studied here, the bubble evolution is expected to be mainly diffusive.
△ Less
Submitted 3 June, 2017;
originally announced June 2017.
-
The history effect in bubble growth and dissolution. Part 1. Theory
Authors:
Pablo Peñas-López,
Miguel A. Parrales,
Javier Rodríguez-Rodríguez,
Devaraj van der Meer
Abstract:
The term `history effect' refers to the contribution of any past mass transfer events between a gas bubble and its liquid surroundings towards the current diffusion-driven growth or dissolution dynamics of that same bubble. The history effect arises from the (non-instantaneous) development of the dissolved gas concentration boundary layer in the liquid in response to changes in the concentration a…
▽ More
The term `history effect' refers to the contribution of any past mass transfer events between a gas bubble and its liquid surroundings towards the current diffusion-driven growth or dissolution dynamics of that same bubble. The history effect arises from the (non-instantaneous) development of the dissolved gas concentration boundary layer in the liquid in response to changes in the concentration at the bubble interface caused, for instance, by variations of the ambient pressure in time. Essentially, the history effect amounts to the acknowledgement that at any given time the mass flux across the bubble is conditioned by the preceding time-history of the concentration at the bubble boundary. Considering the canonical problem of an isolated spherical bubble at rest, we show that the contribution of the history effect in the current interfacial concentration gradient is fully contained within a memory integral of the interface concentration. Retaining this integral term, we formulate a governing differential equation for the bubble dynamics, analogous to the well-known Epstein-Plesset solution. Our equation does not make use of the quasi-static radius approximation. An analytical solution is presented for the case of multiple step-like jumps in pressure. The nature and relevance of the history effect is then assessed through illustrative examples. Finally, we investigate the role of the history effect in rectified diffusion for a bubble that pulsates under harmonic pressure forcing in the non-inertial, isothermal regime.
△ Less
Submitted 3 June, 2017;
originally announced June 2017.
-
Drop tower setup to study the diffusion-driven growth of a foam ball in supersaturated liquids in microgravity conditions
Authors:
Patricia Vega-Martínez,
Javier Rodríguez-Rodríguez,
Devaraj van der Meer,
Matthias Sperl
Abstract:
The diffusion-driven growth of a foam ball is a phenomenon that appears in many manufacturing process as well as in a variety of geological phenomena. Usually these processes are greatly affected by gravity, as foam is much lighter than the surrounding liquid. However, the growth of the foam free of gravity effects is still very relevant, as it is connected to manufacturing in space and to the for…
▽ More
The diffusion-driven growth of a foam ball is a phenomenon that appears in many manufacturing process as well as in a variety of geological phenomena. Usually these processes are greatly affected by gravity, as foam is much lighter than the surrounding liquid. However, the growth of the foam free of gravity effects is still very relevant, as it is connected to manufacturing in space and to the forma- tion of rocks in meteorites and other small celestial bodies. The aim of this research is to investigate experimentally the growth of a bubble cloud growing in a gas-supersaturated liquid in microgravity conditions. Here, we describe the ex- periments carried out in the drop tower of the Center of Ap- plied Space Technology and Microgravity (ZARM). In few words, a foam seed is formed with spark-induced cavitation in carbonated water, whose time evolution is recorded with two high-speed cameras. Our preliminary results shed some light on how the size of the foam ball scales with time, in particular at times much longer than what could be studied in normal conditions, i.e. on the surface of the Earth, where the dynamics of the foam is already dominated by gravity after several milliseconds.
△ Less
Submitted 26 March, 2017;
originally announced March 2017.
-
Liquid-grain mixing suppresses droplet spreading and splashing during impact
Authors:
Song-Chuan Zhao,
Rianne de Jong,
Devaraj van der Meer
Abstract:
Would a raindrop impacting on a coarse beach behave differently from that impacting on a desert of fine sand? We study this question by a series of model experiments, where the packing density of the granular target, the wettability of individual grains, the grain size, the impacting liquid, and the impact speed are varied. We find that by increasing the grain size and/or the wettability of indivi…
▽ More
Would a raindrop impacting on a coarse beach behave differently from that impacting on a desert of fine sand? We study this question by a series of model experiments, where the packing density of the granular target, the wettability of individual grains, the grain size, the impacting liquid, and the impact speed are varied. We find that by increasing the grain size and/or the wettability of individual grains the maximum droplet spreading undergoes a transition from a capillary regime towards a viscous regime, and splashing is suppressed. The liquid-grain mixing is discovered to be the underlying mechanism. An effective viscosity is defined accordingly to quantitatively explain the observations.
△ Less
Submitted 1 July, 2016;
originally announced July 2016.
-
Volume entrained in the wake of a disc intruding into an oil-water interface
Authors:
Ivo R. Peters,
Matteo Madonia,
Detlef Lohse,
Devaraj van der Meer
Abstract:
An object moving through a plane interface into a fluid deforms the interface in such a way that fluid from one side of the interface is entrained into the other side, a phenomenon known as Darwin's drift. We investigate this phenomenon experimentally using a disc which is started exactly at the interface of two immiscible fluids, namely oil and water. First, we observe that due to the density dif…
▽ More
An object moving through a plane interface into a fluid deforms the interface in such a way that fluid from one side of the interface is entrained into the other side, a phenomenon known as Darwin's drift. We investigate this phenomenon experimentally using a disc which is started exactly at the interface of two immiscible fluids, namely oil and water. First, we observe that due to the density difference between the two fluids the deformation of the interface is influenced by gravity, and show that there exits a time window of universal behavior. Secondly, we show by comparing with boundary integral simulations that, even though the deformation is universal, our results cannot be fully explained by potential flow solutions. We attribute this difference to the starting vortex, which is created in the wake of the disc. Universal behavior is preserved, however, because the size and strength of the vortex shows the same universality as the potential flow solution.
△ Less
Submitted 12 January, 2016;
originally announced January 2016.
-
Universal mechanism for air entrainment during liquid impact
Authors:
Maurice H. W. Hendrix,
Wilco Bouwhuis,
Devaraj van der Meer,
Detlef Lohse,
Jacco H. Snoeijer
Abstract:
When a mm-sized liquid drop approaches a deep liquid pool, both the interface of the drop and the pool deform before the drop touches the pool. The build up of air pressure prior to coalescence is responsible for this deformation. Due to this deformation, air can be entrained at the bottom of the drop during the impact. We quantify the amount of entrained air numerically, using the Boundary Integr…
▽ More
When a mm-sized liquid drop approaches a deep liquid pool, both the interface of the drop and the pool deform before the drop touches the pool. The build up of air pressure prior to coalescence is responsible for this deformation. Due to this deformation, air can be entrained at the bottom of the drop during the impact. We quantify the amount of entrained air numerically, using the Boundary Integral Method (BIM) for potential flow for the drop and the pool, coupled to viscous lubrication theory for the air film that has to be squeezed out during impact. We compare our results to various experimental data and find excellent agreement for the amount of air that is entrapped during impact onto a pool. Next, the impact of a rigid sphere onto a pool is numerically investigated and the air that is entrapped in this case also matches with available experimental data. In both cases of drop and sphere impact onto a pool the numerical air bubble volume V_b is found to be in agreement with the theoretical scaling V_b/V_{drop/sphere} ~ St^{-4/3}, where St is the Stokes number. This is the same scaling that has been found for drop impact onto a solid surface in previous research. This implies a universal mechanism for air entrainment for these different impact scenarios, which has been suggested in recent experimental work, but is now further elucidated with numerical results.
△ Less
Submitted 10 February, 2015;
originally announced February 2015.
-
High-speed X-ray imaging of a ball impacting on loose sand
Authors:
Tess Homan,
Rob Mudde,
Detlef Lohse,
Devaraj van der Meer
Abstract:
When a ball is dropped in fine, very loose sand, a splash and subsequently a jet are ob- served above the bed, followed by a granular eruption. To directly and quantitatively determine what happens inside the sand bed, high-speed X-ray tomography measurements are carried out in a custom-made setup that allows for imaging of a large sand bed at atmospheric pressures. Herewith we show that the jet o…
▽ More
When a ball is dropped in fine, very loose sand, a splash and subsequently a jet are ob- served above the bed, followed by a granular eruption. To directly and quantitatively determine what happens inside the sand bed, high-speed X-ray tomography measurements are carried out in a custom-made setup that allows for imaging of a large sand bed at atmospheric pressures. Herewith we show that the jet originates from the pinch-off point created by the collapse of the air cavity formed behind the penetrating ball.Subsequently we measure how the entrapped air bubble rises through the sand and show that this is consistent with bubbles rising in continuously fluidized beds. Finally, we measure the packing fraction variation throughout the bed. From this we show that there is (i) a compressed area of sand in front of and next to the ball while the ball is moving down, (ii) a strongly compacted region at the pinch-off height after the cavity collapse; and (iii) a relatively loosely packed center in the wake of the rising bubble.
△ Less
Submitted 9 December, 2014;
originally announced December 2014.
-
Initial surface deformations during impact on a liquid pool
Authors:
Wilco Bouwhuis,
Maurice H. W. Hendrix,
Devaraj van der Meer,
Jacco H. Snoeijer
Abstract:
A tiny air bubble can be entrapped at the bottom of a solid sphere that impacts onto a liquid pool. The bubble forms due to the deformation of the liquid surface by a local pressure buildup inside the surrounding gas, as also observed during the impact of a liquid drop on a solid wall. Here we perform a perturbation analysis to quantitatively predict the initial deformations of the free surface of…
▽ More
A tiny air bubble can be entrapped at the bottom of a solid sphere that impacts onto a liquid pool. The bubble forms due to the deformation of the liquid surface by a local pressure buildup inside the surrounding gas, as also observed during the impact of a liquid drop on a solid wall. Here we perform a perturbation analysis to quantitatively predict the initial deformations of the free surface of the liquid pool as it is approached by a solid sphere. We study the natural limits where the gas can be treated as a viscous fluid (Stokes flow) or as an inviscid fluid (potential flow). For both cases we derive the spatio-temporal evolution of the pool surface, and recover some of the recently proposed scaling laws for bubble entrapment. When inserting typical experimental values for the impact parameters, we find that the bubble volume is mainly determined by the effect of gas viscosity.
△ Less
Submitted 19 March, 2015; v1 submitted 13 November, 2014;
originally announced November 2014.
-
Quantfying rich patterns in agglomeration of floating beads
Authors:
Ceyda Sanlı,
Detlef Lohse,
Devaraj van der Meer
Abstract:
Macroscopic spherical particles spontaneously form rich patterns on a standing Faraday wave. These patterns are found to follow a very systematic trend depending on the floater concentration $φ$: The same floaters that accumulate at amplitude maxima (antinodes) of the wave at low $φ$, surprisingly move towards the nodal lines when $φ$ is beyond a certain value. In more detail, circular irregularly…
▽ More
Macroscopic spherical particles spontaneously form rich patterns on a standing Faraday wave. These patterns are found to follow a very systematic trend depending on the floater concentration $φ$: The same floaters that accumulate at amplitude maxima (antinodes) of the wave at low $φ$, surprisingly move towards the nodal lines when $φ$ is beyond a certain value. In more detail, circular irregularly packed antinode clusters at low $φ$ give way to loosely packed filamentary structures at intermediate $φ$, and are then followed by densely packed grid-shaped node clusters at high $φ$. Here, we successfully characterize the morphology of these rich patterns using a metric analysis, i.e., the Minkowski functionals. We modify the Minkowski functionals such that we are able to measure the physical quantities of the clusters such as area, perimeter, and aspect ratio.
△ Less
Submitted 8 May, 2014;
originally announced May 2014.
-
Exploring droplet impact near a millimetre-sized hole: comparing a closed pit with an open-ended pore
Authors:
Rianne de Jong,
Oscar R. Enríquez,
Devaraj van der Meer
Abstract:
We investigate drop impact dynamics near both closed pits and open- ended pores experimentally. The resulting impact phenomena differ greatly for a pit or a pore. For the first, we observe three phenomena: a splash, a jet and an air bubble, whose appearance depends on the distance between impact location and pit. Furthermore, we found that splash velocities can reach up to seven times the impact v…
▽ More
We investigate drop impact dynamics near both closed pits and open- ended pores experimentally. The resulting impact phenomena differ greatly for a pit or a pore. For the first, we observe three phenomena: a splash, a jet and an air bubble, whose appearance depends on the distance between impact location and pit. Furthermore, we found that splash velocities can reach up to seven times the impact velocity. Drop impact near a pore, however, results solely in splashing. Surprisingly, two distinct and disconnected splashing regimes occur, with a region of plain spreading in-between. For pores, splashes are less pronounced than in the pit case. We state that, for the pit case, the presence of air inside the pit plays a crucial role: it promotes splashing and allows for air bubbles to appear.
△ Less
Submitted 8 May, 2015; v1 submitted 14 March, 2014;
originally announced March 2014.
-
Hole dynamics in vertically vibrated liquids and suspensions
Authors:
Stefan von Kann,
Matthias van de Raa,
Devaraj van der Meer
Abstract:
We study the dynamics of holes created in vertically vibrated dense suspensions and viscous Newtonian liquids. We find that all holes oscillate with the driving frequency, with a phase shift of $π/2$. In Newtonian liquids holes always close, while in suspensions holes may grow in time. We present a lubrication model for the closure of holes which is in good agreement with the experiments in Newton…
▽ More
We study the dynamics of holes created in vertically vibrated dense suspensions and viscous Newtonian liquids. We find that all holes oscillate with the driving frequency, with a phase shift of $π/2$. In Newtonian liquids holes always close, while in suspensions holes may grow in time. We present a lubrication model for the closure of holes which is in good agreement with the experiments in Newtonian liquids. The growth rate of growing holes in suspensions is found to scale with the particle diameter over the suspending liquid viscosity. Comparing closing holes in Newtonian liquids to growing holes in dense suspensions we find a sinusoidal, linear response in the first, and a highly non-linear one in the latter. Moreover, the symmetry of the oscillation is broken and is shown to provide an explanation for the observation that holes in dense suspensions can grow.
△ Less
Submitted 14 December, 2013;
originally announced December 2013.
-
Collective motion of macroscopic spheres floating on capillary ripples: Dynamic heterogeneity and dynamic criticality
Authors:
Ceyda Sanlı,
Kuniyasu Saitoh,
Stefan Luding,
Devaraj van der Meer
Abstract:
When a dense monolayer of macroscopic slightly polydisperse spheres floats on chaotic capillary Faraday waves, a coexistence of large scale convective motion and caging dynamics typical for jammed systems is observed. We subtract the convective mean flow using a coarse graining and reveal subdiffusion for the caging time scales followed by a diffusive regime at later times. To test the system in t…
▽ More
When a dense monolayer of macroscopic slightly polydisperse spheres floats on chaotic capillary Faraday waves, a coexistence of large scale convective motion and caging dynamics typical for jammed systems is observed. We subtract the convective mean flow using a coarse graining and reveal subdiffusion for the caging time scales followed by a diffusive regime at later times. To test the system in the light of dynamic criticality, we apply the methods of dynamic heterogeneity to obtain the power-law divergent time and length scales as the floater concentration approaches the jamming point. We find that these are independent of the application of the coarse graining procedure. The critical exponents are consistent with those found in dense suspensions of colloids indicating universal stochastic dynamics.
△ Less
Submitted 8 May, 2014; v1 submitted 15 September, 2013;
originally announced September 2013.
-
Oscillating and star-shaped drops levitated by an airflow
Authors:
Wilco Bouwhuis,
Koen G. Winkels,
Ivo R. Peters,
Philippe Brunet,
Devaraj van der Meer,
Jacco H. Snoeijer
Abstract:
We investigate the spontaneous oscillations of drops levitated above an air cushion, eventually inducing a breaking of axisymmetry and the appearance of `star drops'. This is strongly reminiscent of the Leidenfrost stars that are observed for drops floating above a hot substrate. The key advantage of this work is that we inject the airflow at a constant rate below the drop, thus eliminating therma…
▽ More
We investigate the spontaneous oscillations of drops levitated above an air cushion, eventually inducing a breaking of axisymmetry and the appearance of `star drops'. This is strongly reminiscent of the Leidenfrost stars that are observed for drops floating above a hot substrate. The key advantage of this work is that we inject the airflow at a constant rate below the drop, thus eliminating thermal effects and allowing for a better control of the flow rate. We perform experiments with drops of different viscosities and observe stable states, oscillations and chimney instabilities. We find that for a given drop size the instability appears above a critical flow rate, where the latter is largest for small drops. All these observations are reproduced by numerical simulations, where we treat the drop using potential flow and the gas as a viscous lubrication layer. Qualitatively, the onset of instability agrees with the experimental results, although the typical flow rates are too large by a factor 10. Our results demonstrate that thermal effects are not important for the formation of star drops, and strongly suggest a purely hydrodynamic mechanism for the formation of Leidenfrost stars.
△ Less
Submitted 23 May, 2013;
originally announced May 2013.
-
Growing bubbles in a slightly supersaturated liquid solution
Authors:
Oscar R. Enríquez,
Christian Hummelink,
Gert-Wim Bruggert,
Detlef Lohse,
Andrea Prosperetti,
Devaraj van der Meer,
Chao Sun
Abstract:
We have designed and constructed an experimental system to study gas bubble growth in slightly supersatu- rated liquids. This is achieved by working with carbon dioxide dissolved in water, pressurized at a maximum of 1 MPa and applying a small pressure drop from saturation conditions. Bubbles grow from hydrophobic cavities etched on silicon wafers, which allows us to control their number and posit…
▽ More
We have designed and constructed an experimental system to study gas bubble growth in slightly supersatu- rated liquids. This is achieved by working with carbon dioxide dissolved in water, pressurized at a maximum of 1 MPa and applying a small pressure drop from saturation conditions. Bubbles grow from hydrophobic cavities etched on silicon wafers, which allows us to control their number and position. Hence, the experiment can be used to investigate the interaction among bubbles growing in close proximity when the main mass transfer mechanism is diffusion and there is a limited availability of the dissolved species.
△ Less
Submitted 24 May, 2013;
originally announced May 2013.
-
Automatic sorting of point pattern sets using Minkowski Functionals
Authors:
Joshua Parker,
Eilon Sherman,
Matthias van de Raa,
Devaraj van der Meer,
Lawrence E. Samelson,
Wolfgang Losert
Abstract:
Point pattern sets arise in many different areas of physical, biological, and applied research, representing many random realizations of underlying pattern formation mechanisms. These pattern sets can be heterogeneous with respect to underlying spatial processes, which may not be visually distinguishable. This heterogeneity can be elucidated by looking at statistical measures of the patterns sets…
▽ More
Point pattern sets arise in many different areas of physical, biological, and applied research, representing many random realizations of underlying pattern formation mechanisms. These pattern sets can be heterogeneous with respect to underlying spatial processes, which may not be visually distinguishable. This heterogeneity can be elucidated by looking at statistical measures of the patterns sets and using these measures to divide the pattern set into distinct groups representing like spatial processes. We introduce here a numerical procedure for sorting point pattern sets into spatially homogeneous groups using Functional Principal Component Analysis (FPCA) applied to the approximated Minkowski functionals of each pattern. We demonstrate that this procedure correctly sorts pattern sets into similar groups both when the patterns are drawn from similar processes and when the 2nd-order characteristics of the pattern are identical. We highlight this routine for distinguishing the molecular patterning of fluorescently labeled cell membrane proteins, a subject of much interest in studies investigating complex spatial signaling patterns involved in the human immune response.
△ Less
Submitted 5 March, 2013;
originally announced March 2013.
-
Air flow in a collapsing cavity
Authors:
Ivo R. Peters,
Stephan Gekle,
Detlef Lohse,
Devaraj van der Meer
Abstract:
We experimentally study the airflow in a collapsing cavity created by the impact of a circular disk on a water surface. We measure the air velocity in the collapsing neck in two ways: Directly, by means of employing particle image velocimetry of smoke injected into the cavity and indirectly, by determining the time rate of change of the volume of the cavity at pinch-off and deducing the air flow i…
▽ More
We experimentally study the airflow in a collapsing cavity created by the impact of a circular disk on a water surface. We measure the air velocity in the collapsing neck in two ways: Directly, by means of employing particle image velocimetry of smoke injected into the cavity and indirectly, by determining the time rate of change of the volume of the cavity at pinch-off and deducing the air flow in the neck under the assumption that the air is incompressible. We compare our experiments to boundary integral simulations and show that close to the moment of pinch-off, compressibility of the air starts to play a crucial role in the behavior of the cavity. Finally, we measure how the air flow rate at pinch-off depends on the Froude number and explain the observed dependence using a theoretical model of the cavity collapse.
△ Less
Submitted 18 February, 2013;
originally announced February 2013.
-
Splash wave and crown breakup after disc impact on a liquid surface
Authors:
Ivo R. Peters,
Devaraj van der Meer,
J. M. Gordillo
Abstract:
In this paper we analyze the impact of a circular disc on a free surface using experiments, potential flow numerical simulations and theory. We focus our attention both on the study of the generation and possible breakup of the splash wave created after the impact and on the calculation of the force on the disc. We have experimentally found that drops are only ejected from the rim located at the t…
▽ More
In this paper we analyze the impact of a circular disc on a free surface using experiments, potential flow numerical simulations and theory. We focus our attention both on the study of the generation and possible breakup of the splash wave created after the impact and on the calculation of the force on the disc. We have experimentally found that drops are only ejected from the rim located at the top part of the splash --giving rise to what is known as the crown splash-- if the impact Weber number exceeds a threshold value $\Weber_{crit}\simeq 140$. We explain this threshold by defining a local Bond number $Bo_{tip}$ based on the rim deceleration and its radius of curvature, with which we show using both numerical simulations and experiments that a crown splash only occurs when $Bo_{tip}\gtrsim 1$, revealing that the rim disrupts due to a Rayleigh-Taylor instability. Neglecting the effect of air, we show that the flow in the region close to the disc edge possesses a Weber-number-dependent self-similar structure for every Weber number. From this we demonstrate that $\Bond_{tip}\propto\Weber$, explaining both why the transition to crown splash can be characterized in terms of the impact Weber number and why this transition occurs for $We_{crit}\simeq 140$.
Next, including the effect of air, we have developed a theory which predicts the time-varying thickness of the very thin air cushion that is entrapped between the impacting solid and the liquid. Our analysis reveals that gas critically affect the velocity of propagation of the splash wave as well as the time-varying force on the disc, $F_D$. The existence of the air layer also limits the range of times in which the self-similar solution is valid and, accordingly, the maximum deceleration experienced by the liquid rim, what sets the length scale of the splash drops ejected when $We>\Weber_{crit}$.
△ Less
Submitted 18 February, 2013; v1 submitted 28 November, 2012;
originally announced November 2012.
-
Maximal air bubble entrainment at liquid drop impact
Authors:
Wilco Bouwhuis,
Roeland C. A. van der Veen,
Tuan Tran,
Diederik L. Keij,
Koen G. Winkels,
Ivo R. Peters,
Devaraj van der Meer,
Chao Sun,
Jacco H. Snoeijer,
Detlef Lohse
Abstract:
At impact of a liquid drop on a solid surface an air bubble can be entrapped. Here we show that two competing effects minimize the (relative) size of this entrained air bubble: For large drop impact velocity and large droplets the inertia of the liquid flattens the entrained bubble, whereas for small impact velocity and small droplets capillary forces minimize the entrained bubble. However, we dem…
▽ More
At impact of a liquid drop on a solid surface an air bubble can be entrapped. Here we show that two competing effects minimize the (relative) size of this entrained air bubble: For large drop impact velocity and large droplets the inertia of the liquid flattens the entrained bubble, whereas for small impact velocity and small droplets capillary forces minimize the entrained bubble. However, we demonstrate experimentally, theoretically, and numerically that in between there is an optimum, leading to maximal air bubble entrapment. Our results have a strong bearing on various applications in printing technology, microelectronics, immersion lithography, diagnostics, or agriculture.
△ Less
Submitted 21 May, 2012;
originally announced May 2012.
-
Highly focused supersonic microjets: numerical simulations
Authors:
Ivo R. Peters,
Yoshiyuki Tagawa,
Nikolai Oudalov,
Chao Sun,
Andrea Prosperetti,
Detlef Lohse,
Devaraj van der Meer
Abstract:
By focusing a laser pulse inside a capillary partially filled with liquid, a vapour bubble is created which emits a pressure wave. This pressure wave travels through the liquid and creates a fast, focused axisymmetric microjet when it is reflected at the meniscus. We numerically investigate the formation of this microjet using axisymmetric boundary-integral simulations, where we model the pressure…
▽ More
By focusing a laser pulse inside a capillary partially filled with liquid, a vapour bubble is created which emits a pressure wave. This pressure wave travels through the liquid and creates a fast, focused axisymmetric microjet when it is reflected at the meniscus. We numerically investigate the formation of this microjet using axisymmetric boundary-integral simulations, where we model the pressure wave as a pressure pulse applied on the bubble. We find a good agreement between the simulations and experimental results in terms of the time evolution of the jet and on all parameters that can be compared directly. We present a simple analytical model that accurately predicts the velocity of the jet after the pressure pulse and its maximum velocity.
△ Less
Submitted 27 September, 2012; v1 submitted 22 March, 2012;
originally announced March 2012.
-
From antinode clusters to node clusters: The concentration dependent transition of floaters on a standing Faraday wave
Authors:
Ceyda Sanlı,
Detlef Lohse,
Devaraj van der Meer
Abstract:
A hydrophilic floating sphere that is denser than water drifts to an amplitude maximum (antinode) of a surface standing wave. A few identical floaters therefore organize into antinode clusters. However, beyond a transitional value of the floater concentration $φ$, we observe that the same spheres spontaneously accumulate at the nodal lines, completely inverting the self-organized particle pattern…
▽ More
A hydrophilic floating sphere that is denser than water drifts to an amplitude maximum (antinode) of a surface standing wave. A few identical floaters therefore organize into antinode clusters. However, beyond a transitional value of the floater concentration $φ$, we observe that the same spheres spontaneously accumulate at the nodal lines, completely inverting the self-organized particle pattern on the wave. From a potential energy estimate we show (i) that at low $φ$ antinode clusters are energetically favorable over nodal ones and (ii) how this situation reverses at high $φ$, in agreement with the experiment.
△ Less
Submitted 8 May, 2014; v1 submitted 31 January, 2012;
originally announced February 2012.
-
Highly focused supersonic microjets
Authors:
Yoshiyuki Tagawa,
Nikolai Oudalov,
Claas Willem Visser,
Ivo R. Peters,
Deveraj van der Meer,
Chao Sun,
Andrea Prosperetti,
Detlef Lohse
Abstract:
The paper describes the production of thin, focused microjets with velocities up to 850 m/s by the rapid vaporization of a small mass of liquid in an open liquid-filled capillary. The vaporization is caused by the absorption of a low-energy laser pulse. A likely explanation of the observed phenomenon is based on the impingement of the shock wave caused by the nearly-instantaneous vaporization on t…
▽ More
The paper describes the production of thin, focused microjets with velocities up to 850 m/s by the rapid vaporization of a small mass of liquid in an open liquid-filled capillary. The vaporization is caused by the absorption of a low-energy laser pulse. A likely explanation of the observed phenomenon is based on the impingement of the shock wave caused by the nearly-instantaneous vaporization on the free surface of the liquid. An experimental study of the dependence of the jet velocity on several parameters is conducted, and a semi-empirical relation for its prediction is developed. The coherence of the jets, their high velocity and good reproducibility and controllability are unique features of the system described. A possible application is to the development of needle-free drug injection systems which are of great importance for global health care.
△ Less
Submitted 27 April, 2012; v1 submitted 12 December, 2011;
originally announced December 2011.
-
Collapse of a non-axisymmetric, impact-created air cavity in water
Authors:
Oscar R. Enriquez,
Ivo R. Peters,
Stephan Gekle,
Laura E. Schmidt,
Detlef Lohse,
Devaraj Van Der Meer
Abstract:
The axisymmetric collapse of a cylindrical air cavity in water follows a universal power law with logarithmic corrections. Nonetheless, it has been suggested that the introduction of a small azimuthal disturbance induces a long term memory effect, reflecting in oscillations which are no longer universal but remember the initial condition. In this work, we create non-axisymmetric air cavities by dr…
▽ More
The axisymmetric collapse of a cylindrical air cavity in water follows a universal power law with logarithmic corrections. Nonetheless, it has been suggested that the introduction of a small azimuthal disturbance induces a long term memory effect, reflecting in oscillations which are no longer universal but remember the initial condition. In this work, we create non-axisymmetric air cavities by driving a metal disc through an initially-quiescent water surface and observe their subsequent gravity-induced collapse. The cavities are characterized by azimuthal harmonic disturbances with a single mode number $m$ and amplitude $a_m$. For small initial distortion amplitude (1 or 2% of the mean disc radius), the cavity walls oscillate linearly during collapse, with nearly constant amplitude and increasing frequency. As the amplitude is increased, higher harmonics are triggered in the oscillations and we observe more complex pinch-off modes. For small amplitude disturbances we compare our experimental results with the model for the amplitude of the oscillations by Schmidt et al. (2009) and the model for the collapse of an axisymmetric impact-created cavity previously proposed by Bergmann et al. (2009b). By combining these two models we can reconstruct the three-dimensional shape of the cavity at any time before pinch-off.
△ Less
Submitted 2 March, 2012; v1 submitted 27 September, 2011;
originally announced September 2011.
-
The effect of finite container size on granular jet formation
Authors:
Stefan von Kann,
Sylvain Joubaud,
Gabriel A. Caballero-Robledo,
Detlef Lohse,
Devaraj van der Meer
Abstract:
When an object is dropped into a bed of fine, loosely packed sand, a surprisingly energetic jet shoots out of the bed. In this work we study the effect that boundaries have on the granular jet formation. We did this by (i) decreasing the depth of the sand bed and (ii) reducing the container diameter to only a few ball diameters. These confinements change the behavior of the ball inside the bed,…
▽ More
When an object is dropped into a bed of fine, loosely packed sand, a surprisingly energetic jet shoots out of the bed. In this work we study the effect that boundaries have on the granular jet formation. We did this by (i) decreasing the depth of the sand bed and (ii) reducing the container diameter to only a few ball diameters. These confinements change the behavior of the ball inside the bed, the void collapse, and the resulting jet height and shape. We map the parameter space of impact with Froude number, ambient pressure, and container dimensions as parameters. From these results we propose a new explanation for the thick-thin structure of the jet reported by several groups [J.R.Royer \textit{et al}., Nature Phys. \textbf{1}, 164 (2005)], [G.Caballero \textit{et al}., Phys. Rev. Lett. \textbf{99}, 018001 (2007)] and [J.O. Marston, \textit{et al}., Physics of Fluids \textbf{20}, 023301 (2008)].
△ Less
Submitted 12 November, 2009;
originally announced November 2009.
-
Collapse of Non-Axisymmetric Cavities
Authors:
Oscar R. Enriquez,
Ivo R. Peters,
Stephan Gekle,
Laura Schmidt,
Michel Versluis,
Devaraj van der Meer,
Detlef Lohse
Abstract:
A round disk with a harmonic disturbance impacts on a water surface and creates a non-axisymmetric cavity which collapses under the influence of hydrostatic pressure. We use disks deformed with mode m=2 to m=6. For all mode numbers we find clear evidence for a phase inversion of the cavity wall during the collapse. We present a fluid dynamics video showing high speed imaging of different modes,…
▽ More
A round disk with a harmonic disturbance impacts on a water surface and creates a non-axisymmetric cavity which collapses under the influence of hydrostatic pressure. We use disks deformed with mode m=2 to m=6. For all mode numbers we find clear evidence for a phase inversion of the cavity wall during the collapse. We present a fluid dynamics video showing high speed imaging of different modes, pointing out the characteristic features during collapse.
△ Less
Submitted 14 October, 2009;
originally announced October 2009.
-
Supersonic Air Flow due to Solid-Liquid Impact
Authors:
Stephan Gekle,
Ivo Peters,
Jose Manuel Gordillo,
Devaraj van der Meer,
Detlef Lohse
Abstract:
A solid object impacting on liquid creates a liquid jet due to the collapse of the impact cavity. Using visualization experiments with smoke particles and multiscale simulations we show that in addition a high-speed air-jet is pushed out of the cavity. Despite an impact velocity of only 1 m/s, this air-jet attains \emph{supersonic} speeds already when the cavity is slightly larger than 1 mm in d…
▽ More
A solid object impacting on liquid creates a liquid jet due to the collapse of the impact cavity. Using visualization experiments with smoke particles and multiscale simulations we show that in addition a high-speed air-jet is pushed out of the cavity. Despite an impact velocity of only 1 m/s, this air-jet attains \emph{supersonic} speeds already when the cavity is slightly larger than 1 mm in diameter. The structure of the air flow resembles closely that of compressible flow through a nozzle -- with the key difference that here the "nozzle" is a \emph{liquid} cavity shrinking rapidly in time.
△ Less
Submitted 21 January, 2010; v1 submitted 21 September, 2009;
originally announced September 2009.
-
Approach to Universality in Axisymmetric Bubble Pinch-Off
Authors:
Stephan Gekle,
Devaraj van der Meer,
Jacco H. Snoeijer,
Detlef Lohse
Abstract:
The pinch-off of an axisymmetric air bubble surrounded by an inviscid fluid is compared in four physical realizations: (i) cavity collapse in the wake of an impacting disc, (ii) gas bubbles injected through a small orifice, (iii) bubble rupture in a straining flow, and (iv) a bubble with an initially necked shape. Our boundary-integral simulations suggest that all systems eventually follow the u…
▽ More
The pinch-off of an axisymmetric air bubble surrounded by an inviscid fluid is compared in four physical realizations: (i) cavity collapse in the wake of an impacting disc, (ii) gas bubbles injected through a small orifice, (iii) bubble rupture in a straining flow, and (iv) a bubble with an initially necked shape. Our boundary-integral simulations suggest that all systems eventually follow the universal behavior characterized by slowly varying exponents predicted in [Eggers et al., PRL 98, 094502 (2007)]. However, the time scale for the onset of this final regime is found to vary by orders of magnitude depending on the system in question: while for the impacting disc it is well in the millisecond range, for the gas injection needle universal behavior sets in only a few microseconds before pinch-off. These findings reconcile the different views expressed in recent literature about the universal nature of bubble pinch-off.
△ Less
Submitted 15 April, 2009;
originally announced April 2009.
-
High-speed Jet Formation after Solid Object Impact
Authors:
Stephan Gekle,
José Manuel Gordillo,
Devaraj van der Meer,
Detlef Lohse
Abstract:
A circular disc impacting on a water surface creates a remarkably vigorous jet. Upon impact an axisymmetric air cavity forms and eventually pinches off in a single point halfway down the cavity. Immediately after closure two fast sharp-pointed jets are observed shooting up- and downwards from the closure location, which by then has turned into a stagnation point surrounded by a locally hyperboli…
▽ More
A circular disc impacting on a water surface creates a remarkably vigorous jet. Upon impact an axisymmetric air cavity forms and eventually pinches off in a single point halfway down the cavity. Immediately after closure two fast sharp-pointed jets are observed shooting up- and downwards from the closure location, which by then has turned into a stagnation point surrounded by a locally hyperbolic flow pattern. This flow, however, is {\it not} the mechanism feeding the two jets. Using high-speed imaging and numerical simulations we show that jetting is fed by the local flow around the base of the jet, which is forced by the colliding cavity walls. Based on this insight, we then show how the analytical description of a collapsing void (using a line of sinks along the axis of symmetry) can be continued beyond the time of pinch-off to obtain a quantitative model for jet formation which is in good agreement with the numerical and experimental data.
△ Less
Submitted 25 September, 2008;
originally announced September 2008.
-
Controlled impact of a disk on a water surface: Cavity dynamics
Authors:
Raymond Bergmann,
Devaraj van der Meer,
Stephan Gekle,
Arjan van der Bos,
Detlef Lohse
Abstract:
In this paper we study the transient surface cavity which is created by the controlled impact of a disk of radius h0 on a water surface at Froude numbers below 200. The dynamics of the transient free surface is recorded by high speed imaging and compared to boundary integral simulations. An excellent agreement is found between both. The flow surrounding the cavity is measured with high speed par…
▽ More
In this paper we study the transient surface cavity which is created by the controlled impact of a disk of radius h0 on a water surface at Froude numbers below 200. The dynamics of the transient free surface is recorded by high speed imaging and compared to boundary integral simulations. An excellent agreement is found between both. The flow surrounding the cavity is measured with high speed particle image velocimetry and is found to also agree perfectly with the flow field obtained from the simulations. We present a simple model for the radial dynamics of the cavity based on the collapse of an infinite cylinder. This model accounts for the observed asymmetry of the radial dynamics between the expansion and contraction phase of the cavity. It reproduces the scaling of the closure depth and total depth of the cavity which are both found to scale roughly proportional to Fr^{1/2} with a weakly Froude number dependent prefactor. In addition, the model accurately captures the dynamics of the minimal radius of the cavity, the scaling of the volume Vbubble of air entrained by the process, namely Vbubble/h0^3 proportional (1 + 0.26Fr^{1/2})Fr^{1/2}, and gives insight into the axial asymmetry of the pinch-off process.
△ Less
Submitted 4 April, 2008;
originally announced April 2008.