Truck and Bus Programme

Europe

2009 V1
Table of Content

Page

Environmental, Economic and Social Responsibilities 1

Why GITI Tire 1

Market Segments 2

Pattern Range

Summary and Legend 4

Long Haul 6

Regional 10

Mixed Service 16

Naming convention 20

Product Range 21

Tyres in Development 23

Designations, Load and Speed Index 24

Technical Specifications 25

Load Capacity by Axle(kg) and Pressure(bar) 25

Regrooving of Radial Tyre 32

Contact 36
Environmental, Economic and Social Responsibility
The GITI Tire Research and Development Centre is active in finding
innovative solutions to limit the impact of its products on the environment.

GITI Tire Corporation partners with Conservation International to

protect forests in Indonesia and China
The program will protect the habitat of threatened species such as the
Sumatran Orang-utan in Indonesia and Pandas in Southwest China and
replant forest areas while helping reduce the levels of atmospheric carbon
that cause climate change. For the first year, the investment will offset the
corporation’s overall carbon emissions in 2008.

Why GITI Tire

GITI Tire are at the forefront of new technology, by helping to reduce road noise, and
improve fuel economy by reducing rolling resistance, and to provide good casing
retreadability and tyre life. GITI Tire has implemented a comprehensive quality control
system at all manufacturing plants. Strict quality control measures ensure that the quality
of raw materials meet the GITI stringent quality standards and specifications.

GITI Tire is fully committed to maintaining the very highest standard of quality control
procedures,and has obtained ISO9001:2000 and ISO/TS16949:2002 accreditation for
all of seven key manufacturing plants. In addition, all plants have obtained or are in the
process of obtaining ISO14001 Environmental Management System Accreditation.

All TBR and PCR tyres produced by GITI Tire for export to Europe satisfy standards
for all the European Union legal directives and standards. E-mark Safety and
Noise Certification tests are performed and accredited by TÜV Rheinland Group.
Approximately 450 employees are involved in research and development activities at
the GITI Research Centre, which oversees the R&D activities of GITI's five tyre plants.
GITI’S research and development efforts have enabled the development of European
Mission Matched products and have also helped improve product design and production
technology to maintain a leading market position. In addition to in-house research and
development capabilities, GITI Tire also collaborates with various leading universities
and top research institutions such as of Science and Technology of China, National
Quality Examination Centre for Rubber Tyre, Smithers Research Laboratories, USA and
TUV Automotive GmbH Tire/Wheel Test Centre in Germany.

GITI Tire has made a significant investment in a tyre testing facility at the internationally
acclaimed MIRA Ltd (Motor Industry Research Association). The MIRA technical
operation provides development and evaluation support to GITI’s Research and
Development Centre and is employed in the development of tyre products for both local
and worldwide application. MIRA is unique in that it provides the widest range of testing
facilities and laboratories for the development of tyres for all types of vehicles.

1
MARKET SEGMENTS
Tyres designed and developed for specific application
requirements
Using the latest design and manufacturing technology GITI Tire has developed a range of Mission Matched
tyres to meet the ever increasing demands of today’s European transport operations.

WEAR RATE

Urban
Mixed Service

ROAD SURFACE
ROUGHNESS

Regional

Long Haul

This diagram gives you details of all our ranges

according to the use.

Product details given for information only. GITI Tire

reserves the right to modify details of products and
services at any time and without notice.

2
 Long Haul Operation:
L • Motorways and trunking
• Long distance journeys mainly on motorways
and A roads
• Constant speeds with minimal braking and
Long
accelerating
Haul
• Well paved road conditions

Regional Operation:
R • Shorter journeys on regional national roads

• Flexible in a variety of applications

• Frequent braking, acceleration and turning

Regional • Mainly on paved road, occasional use on
unpaved road conditions

M Mixed Service Operation:

• Frequent use both on and off road

• Higher loads

• Increase risk of damage from road conditions

Mixed
Service

U Urban Operation:
• Constant stop and go operating conditions

• Frequent speed changes and turning

• Increased risk of damage from curbing impacts

Urban

3
 PATTERN RANGE

Long Haul Regional

ROAD
POSITION

PW202-pg.7 PW210-pg.7 PW02-pg.11 PW212-pg.11

Steer

Drive PW610-pg.8 PW630-pg.8 PW602-pg.13 PW612-pg.13

PW902+-pg.9 PTL711-pg.9 PW802-pg.15

Trailer PTR721-pg.15

All Position

Legend STEER DRIVE

ALL POSITION TRAILER

4
 Mixed service Urban

PW215-pg.12 PW802-pg.12 PW01-pg.17

PW622-pg.13 PW622+-pg.13 PW605-pg.18 PDM331-pg.18

PW01-pg.19 PAM532-pg.19

Long Haul Mixed Service M+S Marked

Snow Symbol

Fuel Friendly
Regional Urban

Directional

5
 Long
L Distance

Operation:
• Motorways and trunking
• Long distance journeys mainly on motorways and A roads

• Constant speeds with minimal braking and accelerating

• Well paved road conditions

6
Long
Haul

PW202
• High mileage performance
• Slow and even wear
• Lower rolling resistance

PW210
• High mileage performance
• Slow and even wear
• Excellent stability
• Lower rolling resistance

Dimension PW202 PW210

9R22.5 136/134M
11R22.5 148/144M
12R22.5 152/148M
315/70R22.5 154/159L(152/148M)
295/80R22.5 152/148M
315/80R22.5 154/150L(156/151L)

7
Long
Haul

PW610
• Excellent traction
• Reduced noise emissions
• High mileage performance

M+S

PW630
• Excellent all season traction
• Slow and even wear
• Reduced noise emissions

M+S

Dimension PW610 PW630

215/75R17.5 126/124M
235/75R17.5 132/130M
315/70R22.5 154/150L(152/148M)
295/80R22.5 152/148M 152/148M
315/80R22.5 154/151M(156/151L)

• Applicable for Bus

8
Long
Haul

PTL711
• Improved resistance to heat build up
• Reduced rolling resistance
• High mileage performance

PW902+
• Improved resistance to heat build up
• High mileage performance
• Reduced rolling resistance

Dimension PTL711 PW902+

215/75R17.5 135/133J
235/75R17.5 143/141J(144/144F)
265/70R19.5 143/141J
285/70R19.5 150/148J
385/55R22.5 160K(158L) 160K(158L)
385/65R22.5 160K(158L) 158L(160K)

9
 R Regional

Operation:
• Shorter journeys on regional and national roads
• Flexible in a variety of applications

• Frequent braking, acceleration and turning

• Mainly on paved road, occasional use on unpaved road conditions

10
Regional

PW02
• Excellent stability and traction
• Reduced noise emissions
• High resistance to tread tearing

PW212
• Improved
build up
resistance to heat

• Reduced rolling resistance

Good grip and braking
•
properties

Dimension PW02 PW212

8.25R16 LT 126/122M
215/75R17.5 126/124M
235/75R17.5 143/141J/132/130M
245/70R19.5 136/134M
265/70R19.5 140/138M
285/70R19.5 146/144L(144/142M)
7.50R20 130/128M
8.25R20 135/131M
9.00R20 144/142K
10.00R20 146/143K 146/143K
11.00R20 149/145K 149/145K
12.00R20 154/149K
12.00R20 154/151K
11R22.5 148/144M
11R22.5 148/145M
255/70R22.5 140/137M
12.00R24 156/153K

11
Regional

PW215
• Superb resistance to abrasion
Improved endurance and
•
reliability
• Slow and even wear

PW802
• Slow and even wear
• High resistance to damage
• Reduced rolling resistance

M+S

Dimension PW215 PW802

235/75R17.5 143/141J
9.00R20 144/142K
10.00R20 146/143K
11.00R20 149/145K
12.00R20 154/151K
13R22.5 154/150L
385/55R22.5
385/65R22.5 158L(160K)
315/80R22.5 154/151K(156/151J)

12
Regional

PW602
• Excellent traction
• Good stability

PW612
• High mileage performance
• Slow and even wear
• Lower rolling resistance

Dimension PW602 PW612

7.50R16 LT 122/118K
8.25R16 LT 126/122K
245/70R19.5 140/138M
265/70R19.5 144/142M(145/143L)
11R22.5 152/148M
12R22.5 152/148M
295/80R22.5 152/148M

13
Regional

PW622
• High mileage performance
• Excellent all season traction
• Slow and even wear

M+S

PW622+
• High mileage performance
• Excellent traction and stability
• Slow and even wear

M+S

Dimension PW622 PW622+

9.00R20 144/142K
10.00R20 146/143K
11.00R20 150/147K
12R22.5 152/148L
315/70R22.5 154/150L
315/80R22.5 154/150(156/150)M(L)
295/80R22.5 152/148M
315/80R22.5 154/150M 154/150(156/150)M(L)

14
Regional

PW802
• Slow and even wear
• High resistance to damage
• Reduced rolling resistance

M+S

PTR721
• High mileage performance
• High resistance to damage
• Good stability

Dimension PW802 PTR721

385/65R22.5 158L(160K) 160K(158L)

15
 M
Mixed
Service

Operation:
• Frequent use both on and off road
• Higher loads

• Increase risk of damage from road conditions

16
Mixed
Service

PW01 M+S

• Excellent traction and stability

• Anti cut and chip compound
• High mileage performance

Dimension PW01
7.50R16 LT 122/118M
8.25R16 LT 126/122M
8.25R20 135/131M
9.00R20 144/142K
10.00R20 146/143K
11.00R20 149/145K
12.00R20 154/149K
11R22.5 148/144M
13R22.5 154/150L(156/150K)
315/80R22.5 154/151L(156/151K)
12.00R24 156/153K

17
Mixed
Service

PW605
• Excellent traction with good
self cleaning properties
Enhanced resistance to tread
•
tearing
• High mileage performance

M+S

PDM331
• High resistance to damage
• Anti cut and chip compound
• Robust casing construction

Dimension PW605 PDM331

9.00R20 144/142K
10.00R20 149/146K
11.00R20 152/149K
12.00R20 154/151J
13R22.5 154/150K(156/150G)
315/80R22.5 156/150K 156/150K
12.00R24 156/153K

18
Mixed
Service

PW01
• Excellent traction and stability
• Anti cut and chip compound
• High mileage performance

M+S

PAM532
• High resistance to damage
• Anti cut and chip compound
• Robust casing construction

Dimension PW01 PAM532

7.50R16 LT 122/118M
8.25R16 LT 126/122M
8.25R20 135/131M
9.00R20 144/142K
10.00R20 146/143K
11.00R20 149/145K
12.00R20 154/149K
13R22.5 148/144M
385/65R22.5 160K (158L)
315/80R22.5 154/151L(156/151K)
12.00R24 156/153K

19
 NAMING CONVENTION

PAM531

Brand Axle Application Axle: Application: Series:

P:Primewell S:Steer L:Long Haul 2:Steer 1:Long Haul
D:Drive R:Regional 6:Drive 2:Regional
A:A.P M:Mixed Service 5:A.P 3:Mixed Service Symbol for
T:Trailer O:Off Road 7:Trailer 5:Off Road improvement
U:Urban 6:Urban

A.P = All Position

NEXT

• Product Range
• Tyres in Development

20
PRODUCT RANGE

Long Haul

DIMENSION PW202 PW210 PW610 PW630 PW902+ PTL711

215/75R17.5 126/124M 135/133J
235/75R17.5 132/130M 143/141J
265/70R19.5 143/141J
285/70R19.5 150/148J
9R22.5 136/134M
11R22.5 148/144M
12R22.5 152/148M
385/55R22.5 160/-K 160K
385/65R22.5 158/-L 160K
315/70R22.5 154/150L 154/150L
295/80R22.5 152/148M 152/148M 152/148M
315/80R22.5 154/151M 154/151M

21
 R

Regional

DIMENSION PW02 PW212 PW215 PW602 PW612 PW622 PW622+ PW802 PTR721
7.50R16 LT 122/118K
8.25R16 LT 126/122M 126/122K
215/75R17.5 126/124M
132/130M
235/75R17.5
143/141J
245/70R19.5 136/134M 136/134M
265/70R19.5 140/138M 140/138M
146/144L 144/142M
285/70R19.5
(144/142M) (145/143L)
7.50R20 130/128M
8.25R20 135/131M
9.00R20 144/142K 144/142K 144/142K
10.00R20 146/143K 146/143K 146/143K 146/143K
11.00R20 149/145K 149/145K 149/145K 150/147K
12.00R20 154/149K 154/151K 154/151K
11R22.5 148/144M 148/145M 148/144M
12R22.5 152/148M 152/148L
13R22.5 154/150L
385/55R22.5
158L 160K
385/65R22.5
(160K) (158L)
255/70R22.5 140/137M
154/150L
315/70R22.5
(152/148M)
275/80R22.5
295/80R22.5 152/148M 152/148M

154/151K 154/150M
315/80R22.5
(156/151J) 156/150L

12.00R24 156/153K

22
 PRODUCT RANGE

Mixed Service

DIMENSION PW01 PW605 PAM532 PDM331

7.50R16 LT 122/118M
8.25R16 LT 126/122M
8.25R20 135/131M
9.00R20 144/142K 144/142K
10.00R20 146/143K 149/146K
11.00R20 149/145K 152/149K
12.00R20 154/149K 154/151J
11R22.5 148/144M
154/150L 154/150K
13R22.5
(156/150K) (156/150G)
385/65R22.5 160K (158L)
154/151L
315/80R22.5 156/150K 156/150K
(156/151K)
12.00R24 156/153K 156/153K

TYRES IN DEVELOPMENT
Application Position Pattern Size Load Index
Long Haul Drive PDL313 295/80R22.5 152/148M
L
Long
315/60R22.5
315/70R22.5
152/148L
154/150(152/148)L(M)
Haul
315/80R22.5 156/150(154/150) L(M)
Regional Steer PSL112 385/55R22.5 158(160) L(K)
R
Regional
Steer
Drive
PSL112
PDR321
385/65R22.5
315/80R22.5
158(160) L(K)
156/150(154/150) L(M)

Mixed Service ALL PAM531 13R22.5 154/150(156/150) K(G)

M
Mixed
ALL
Drive
PAM531
PDM331
315/80R22.5
13R22.5
156/150(154/150) K(L)
154/150(156/150) K(G)
Service

23
Designations, Load and Speed index
Retread buffing direction

Tyre rotation direction Tyre section width(mm)

Tyre series: 80
315 Tyre size ratio x100 = 0.8x100

1RO0 /8
1 54 15 0
E M
Pattern ABL 18 P
name 2REG OV R
LO
AD
0 Radial construction
W

RNGE:J
Internal diameter in

A
L
P
A

2 TUBELE
inches corresponding
DI
RA

to the rim diameter

2 . SS
EL
S TE

5
ALL

Tubeless tyre

Tyre can be regrooved Number of Play Rating

Bigger Ply Rating=Bigger load capacity
154: load carrying capacity index for single tyre
150: load carrying capacity index for dual tyre
M : Speed symbol

Refer to the Speed Symbols and Load Capacity Index tables below

Speed symbols Load Capacity Index

SI km/h LI KG LI KG LI KG
Before fitting, it is B 50 115 1215 136 2240 157 4125
essential to check the 116 1250 137 2300 158 4250
C 60
different markings to 117 1285 138 2360 159 4375
ensure that the tyres D 65
118 1320 139 2430 160 4500
meet the maximum E 70
119 1360 140 2500 161 4625
load and speed F 80
120 1400 141 2575 162 4750
possibilities and/or the G 90 121 1450 142 2650 163 4875
regulations in force. J 100 122 1500 143 2725 164 5000
K 110 123 1550 144 2800 165 5150
L 120 124 1600 145 2900 166 5300
M 130 125 1650 146 3000 167 5450
N 140 126 1700 147 3075 168 5600
P 150 127 1750 148 3150 169 5800
128 1800 149 3250 170 6000
Q 160
129 1850 150 3350 171 6150
R 170
130 1900 151 3450 172 6300
131 1950 152 3550 173 6500
132 2000 153 3650 174 6700
133 2060 154 3750 175 6900
134 2120 155 3875 176 7100
135 2180 156 4000 177 7300

24
TECHNICAL SPECIFICATIONS
S Tyre section.

H Tyre height.

mm
R Unloaded free diameter.

mm
R' Loaded
radius.
deflected

mm
D Rolling Circumference

mm
E Min distance tyre
sidewalls in twin fitment
Tread depth

Load capacity variations according to speed

Speed Load Capacity Variation(%) Pressure

(km/h) Balance(%) The coefficients in this table are
those of the ETRTO standard and
Speed
Symbol are given for information only.
Speed F G J K L M
(km/h)
Contact us for all load capacities
0 +150 +150 +150 +150 +150 +150 40 greater than the basic load limits
5 +110 +110 +110 +110 +110 +110 40 given by tyre markings and used
10 +80 +80 +80 +80 +80 +80 30 in this brochure. When the
15 +65 +65 +65 +65 +65 +65 25 coefficients in these tables lead
to pressure greater than 10 bars,
20 +50 +50 +50 +50 +50 +50 21 you must reduce the maximum
25 +35 +35 +35 +35 +35 +35 17 load capacity to an amount which
30 +25 +25 +25 +25 +25 +25 13 corresponds to a maximum
35 +19 +19 +19 +19 +19 +19 11 pressure of 10 bars.
40 +15 +15 +15 +15 +15 +15 10 If you wish to use pressure greater
45 +13 +13 +13 +13 +13 +13 9 than10 bars, consult us for the tyres,
50 +12 +12 +12 +12 +12 +12 8 check the maximum resistance
55 +11 +11 +11 +11 +11 +11 7 of rims with your rim manufacturer
and comply with regulations in
60 +10 +10 +10 +10 +10 +10 6
force for fitting and use.
65 +7.5 +8.5 +8.5 +8.5 +8.5 +8.5 4 The coefficients indicated in this
70 +5.0 +7.0 +7.0 +7.0 +7.0 +7.0 2 table are taken from the ETRTO.
75 +2.5 +5.5 +5.5 +5.5 +5.5 +5.5 1
80 [0] 4.0 +4.0 +4.0 +4.0 +4.0 0
In urban and suburban traffic
85 2.0 +3.0 +3.0 +3.0 +3.0 0 (M3 – class I): + 15%, when the
90 [0] +2.0 +2.0 +2.0 +2.0 0 average speed is under 40 km/h.
95 +1.0 +1.0 +1.0 +1.0 0
100 [0] 0 0 0 0 In intercity traffic
(M3 – class II): + 10%, when
110 [0] 0 0 0 speed is limited to 60 km/h.
120 [0] 0 0
130 [0] 0

25
 TECHNICAL SPECIFICATIONS
Min
Bead Series SIZE Pattern Index Index 2 PR Type APPROVED Index
Dual
RIMS

1600% 100 7.50R16 PW01 122/118M 14 TT 6.00G 5.50F;6.50H 215 802 375 2446 12.5 242 1500 1320 122

PW612 122/118K 14 TT 12.5 118

16 100 8.25R16 PW01 126/122M 14 TT 6.50H 6.00G 235 860 397 2623 12.5 269 1700 1500 126

PW02 126/122M 14 TT 12.0 122

PW612 126/122K 14 TT 13.0

17.5 75 215/75R17.5 PW212 126/124M 12 TL 6.00 6.75 211 767 360 2339 12.5 239 1700 1600 126

PW610 126/124M 12 TL 14.5 124

17.5 75 215/75R17.5 PTL711 135/133 J 16 TL 6.00 6.75 211 767 360 2339 14.0 239 2180 2060 135

133

17.5 75 235/75R17.5 PW212 132/130M 14 TL 6.75 7.50 233 797 373 2431 13.5 262 2000 1900 132

PW610 132/130M 14 TL 15.0 130

17.5 75 235/75R17.5 PTL711 143/141 J (144/144F) 16 TL 6.75 7.50 233 797 373 2431 13.5 262 2725 2575 143

PW212 143/141 J 16 TL 13.5 (2800) (2800) 141

19.5 70 245/70R19.5 PW212 136/134M 16 TL 7.50 6.75 248 839 392 2559 14.3 279 2240 2120 136

PW612 136/134M 16 TL 15.0 134

19.5 70 265/70R19.5 PW212 140/138M 16 TL 7.50 6.75;8.25 262 867 411 2644 13.0 295 2500 2360 140
PW612 140/138M 16 TL 15.0 138

19.5 70 265/70R19.5 PTL711 143/141 J 18 TL 7.50 6.75;8.25 262 867 411 2644 13.5 295 2725 2575 143

141

19.5 70 285/70R19.5 PW612 144/142M (145/143L) 16 TL 8.25 7.50;9.00 283 895 413 2730 15.0 318 2800 2650 144

(2900) (2725) 142

19.5 70 285/70R19.5 PW212 146/144L (144/142M) 16 TL 8.25 7.50;9.00 283 895 413 2730 13.5 318 3000 2800 146

(2800) (2650) 144

19.5 70 285/70R19.5 PTL711 150/148J 18 TL 8.25 7.50;9.00 283 895 413 2730 13.5 318 3350 3150 150

148

20 100 7.50R20 PW02 130/128M 14 TT 6.0 5.5;6;5 210 928 429 2811.84 13.0 242 1900 1800 130

128

20 100 8.25R20 PW01 135/131M 14 TT 6.5 5.5;6.0;7;0 230 962 445 2914.86 14.0 265 2180 1950 135

PW02 135/131M 14 TT 15.0 131

20 100 9.00R20 PW01 144/142 K 16 TT 7.0 7.5;7.00 259 1018 471 3105 15.0 297 2800 2650 144

PW02 144/142 K 16 TT 15.0 142

PW215 144/142 K 16 TT 14.5

PW622+ 144/142 K 16 TT 16.0

PW605 144/142 K 16 TT 18.5

20 100 10.00R20 PW01 146/143K 16 TT 7.5 8.0;7.50 278 1052 493 3209 16.0 316 3000 2725 146

PW02 146/143K 16 TT 16.0 143

PW212 146/143K 16 TT 15.0

PW215 146/143K 16 TT 16.0

PW622+ 146/143K 16 TT 16.5

20 100 10.00R20 PW605 149/146K 18 TT 7.5 8.0;7.50 278 1052 493 3209 19.0 316 3250 3000 149

146

26
 Load Capacity by AXLE(kg) and PRESSURE(bar)

"S=single
ndex 4.5 4.75 5 5.25 5.5 5.75 6 6.25 6.5 6.75 7 7.25 7.5 7.75 8 8.25 8.5 8.75 9
D=Dual"

22 S 2010 2120 2230 2340 2450 2560 2670 2780 2890 3000

18 D 3670 3850 4030 4210 4390 4570 4750 4930 5100 5280

26 S 2320 2440 2560 2680 2800 2920 3040 3160 3280 3400

22 D 3930 4160 4390 4620 4850 5080 5310 5540 5770 6000

26 S 2280 2400 2510 2620 2740 2850 2960 3070 3180 3290 3400

24 D 4300 4510 4730 4940 5150 5360 5570 5780 5990 6190 6400

35 S 2920 3040 3160 3280 3400 3520 3640 3760 3880 4000 4120 4240 4360

33 D 5480 5710 5940 6170 6400 6630 6860 7090 7320 7550 7780 8010 8240

32 S 2560 2680 2800 2920 3040 3160 3280 3400 3520 3640 3760 3880 4000

30 D 4960 5180 5400 5620 5840 6060 6280 6500 6720 6940 7160 7380 7600

43 S 3620 3760 3890 4020 4150 4280 4410 4540 4670 4800 4930 5060 5190 5320 5450

41 D 6910 7180 7420 7660 7900 8140 8380 8620 8860 9100 9340 9580 9820 10060 10300

36 S 3040 3160 3280 3400 3520 3640 3760 3880 4000 4120 4240 4360 4480

34 D 5720 5950 6180 6410 6640 6870 7100 7330 7560 7790 8020 8250 8480
40 S 3350 3500 3650 3800 3950 4100 4250 4400 4550 4700 4850 5000
38 D 6310 6590 6880 7160 7450 7730 8020 8300 8590 8870 9160 9440

43 S 3620 3760 3890 4020 4150 4280 4410 4540 4670 4800 4930 5060 5190 5320 5450

41 D 6910 7180 7420 7660 7900 8140 8380 8620 8860 9100 9340 9580 9820 10060 10300

44 S 3760 3930 4000 4160 4320 4480 4650 4810 4970 5130 5280 5440 5600

42 D 7300 7600 7570 7870 8180 8490 8790 9100 9400 9700 10000 10300 10600

46 S 3850 4010 4170 4320 4480 4630 4790 4940 5090 5240 5400 5550 5700 5850 6000

44 D 7190 7480 7780 8070 8360 8650 8930 9220 9510 9790 10070 10360 10640 10920 11200

50 S 4300 4480 4650 4830 5000 5170 5340 5520 5690 5860 6030 6200 6360 6530 6700

48 D 8090 8420 8750 9070 9400 9730 10050 10370 10690 11010 11330 11650 11970 12280 12600

30 S 2850 2960 3070 3170 3280 3380 3490 3590 3700 3800

28 D 5410 5610 5810 6010 6210 6410 6610 6810 7000 7200

35 S 3270 3400 3520 3640 3760 3880 4000 4120 4240 4360

31 D 5860 6080 6290 6510 6730 6940 7160 7370 7590 7800

44 S 3670 3830 4000 4160 4320 4480 4650 4810 4970 5130 5280 5440 5600

42 D 6940 7260 7570 7870 8180 8490 8790 9100 9400 9700 10000 10300 10600

46 S 3960 4130 4300 4470 4640 4810 4980 5150 5320 5490 5660 5830 6000

43 D 7300 7600 7900 8200 8500 8800 9100 9400 9700 10000 10300 10600 10900

49 S 4330 4510 4700 4880 5060 5240 5430 5610 5790 5970 6140 6320 6500

46 D 7990 8330 8670 9010 9350 9680 10020 10350 10680 11010 11340 11670 12000

27
 TECHNICAL SPECIFICATIONS
Min
Bead Series SIZE Pattern Index Index 2 PR Type APPROVED Index
Dual
RIMS

20 100 11.00R20 PW01 149/145 K 16 TT 8.0 8.5;8.00 293 1082 507 3300 16.5 330 3250 2900 149

PW02 149/145 K 16 TT 16.5 145

PW212 149/145 K 16 TT 15.0

PW215 149/145 K 16 TT 16.5

PW622+ 149/145 K 16 TT 17.0

20 100 11.00R20 PW605 152/149 K 18 TT 8.0 8.5;8.00 293 1082 507 3300 20.0 330 3550 3250 152

149

20 100 12.00R20 PW01 154/149 K 18 TT 8.5 8.50;9.00 315 1122 526 3422 17.0 344 3750 3250 154

PW02 154/149 K 18 TT 17.0 149

20 100 12.00R20 PW212 154/151 K 18 TT 8.5 8.50;9.00 315 1125 526 3431 17.5 344 3750 3450 154

PW215 154/151 K 18 TT 17.0 151

PW622+ 154/151 K 18 TT 17.5

PW605 154/151 J 18 TT 20.5

22.5 90 9R22.5 PW202 136/134M 14 TL 6.75 6.00;7.50 229 970 456 2959 14.0 259 2240 2120 136

134

22.5 90 11R22.5 PW01 148/144M 16 TL 8.25 7.50 279 1050 493 3203 16.0 314 3150 2800 148

PW202 148/144M 16 TL 14.5 144

PW02 148/144M 16 TL 14.5

PW602 148/144M 16 TL 17.5

22.5 90 11R22.5 PW212 148/145M 16 TL 8.25 7.50 279 1050 493 3203 17.5 314 3150 2900 148

145

22.5 90 12R22.5 PW202 152/148M 16 TL 9.00 8.25 300 1084 507 3306 15.6 338 3550 3150 152

PW602 152/148M 16 TL 17.5 148

PW622+ 152/148L 16 TL 23.0

22.5 90 13R22.5 PW01 154/150L (156/150K) 18 TL 9.75 9.00 320 1124 521 3428 17.0 360 3750 3350 154

PW215 154/150L 18 TL 17.5 (4000) (3350) 150

PW605 154/150K (156/150G) 18 TL 21.0

22.5 80 295/80R22.5 PW210 152/148M 16 TL 9.00 8.25 298 1044 487 3184 17.0 335 3550 3150 152

PW610 152/148M 16 TL 20.5 148

PW630 152/148M 16 TL 18.0

PW622+ 152/148M 16 TL 23.5

22.5 80 315/80R22.5 PW01 154/151L (156/151K) 18 TL 9.00 9.75 312 1076 500 3282 17.0 351 3750 3450 154

PW210 154/151M (156/151L) 18 TL 17.0 (4000) (3450) 151

PW215 154/151K (156/151J) 18 TL 18.5

PW610 154/151M (156/151L) 18 TL 20.5

22.5 80 315/80R22.5 PW622 154/150M (156/150L) 18 TL 9.00 9.75 312 1076 500 3282 23.5 351 3750 3350 154

(4000) (3350) 150

22.5 80 315/80R22.5 PW605 156/150K 18 TL 9.00 9.75 312 1076 500 3282 21.0 351 4000 3350 156

PDM331 156/150K 18 TL 23.0 150

22.5 70 255/70R22.5 PW212 140/137M 16 TL 7.50 6.75;8.25 255 930 435 2837 14.3 287 2500 2300 140

28
 Load Capacity by AXLE(kg) and PRESSURE(bar)

"S=single
dex 4.5 4.75 5 5.25 5.5 5.75 6 6.25 6.5 6.75 7 7.25 7.5 7.75 8 8.25 8.5 8.75 9
D=Dual"

49 S 4400 4550 4700 4850 5000 5150 5300 5450 5600 5750 5900 6050 6200 6350 6500

45 D 7820 8090 8360 8630 8900 9170 9440 9710 9980 10250 10520 10790 11060 11330 11600

52 S 4730 4930 5130 5330 5530 5730 5930 6120 6320 6520 6710 6910 7100

49 D 8660 9030 9390 9760 10130 10490 10850 11210 11570 11930 12290 12640 13000

54 S 5100 5300 5500 5700 5900 6100 6300 6500 6700 6900 7100 7300 7500

49 D 8790 9140 9500 9860 10210 10560 10920 11270 11620 11960 12310 12660 13000

54 S 5100 5300 5500 5700 5900 6100 6300 6500 6700 6900 7100 7300 7500

51 D 8880 9290 9700 10110 10520 10930 11340 11750 12160 12570 12980 13390 13800

36 S 3160 3310 3460 3610 3750 3900 4050 4190 4340 4480

34 D 5980 6260 6550 6830 7100 7380 7660 7930 8210 8480

48 S 4140 4320 4500 4680 4860 5040 5220 5400 5580 5760 5940 6120 6300

44 D 7340 7670 7990 8320 8650 8970 9290 9610 9930 10250 10570 10880 11200

48 S 4140 4320 4500 4680 4860 5040 5220 5400 5580 5760 5940 6120 6300

45 D 7640 7970 8300 8630 8960 9290 9620 9950 10280 10610 10940 11270 11600

52 S 4700 4900 5100 5300 5500 5700 5900 6100 6300 6500 6700 6900 7100

48 D 8520 8860 9200 9540 9880 10220 10560 10900 11240 11580 11920 12260 12600

54 S 5350 5570 5790 6010 6220 6440 6650 6860 7080 7290 7500

50 D 9560 9950 10340 10730 11120 11500 11880 12260 12640 13020 13400

52 S 4700 4900 5100 5300 5500 5700 5900 6100 6300 6500 6700 6900 7100

48 D 8520 8860 9200 9540 9880 10220 10560 10900 11240 11580 11920 12260 12600

54 S 5070 5280 5480 5690 5890 6090 6300 6500 6700 6900 7100 7500

51 D 9330 9710 10090 10460 10840 11210 11590 11960 12330 12700 13070 13800

54 S 5070 5280 5480 5690 5890 6090 6300 6500 6700 6900 7100 7500

50 D 9060 9430 9790 10160 10530 10890 11250 11610 11970 12330 12690 13400

56 S 5410 5630 5850 6070 6280 6500 6720 6930 7150 7360 7580 7790 8000

50 D 9060 9430 9790 10160 10530 10890 11250 11610 11970 12330 12690 13400

40 S 3200 3380 3560 3740 3920 4100 4280 4460 4640 4820 5000

29
 TECHNICAL SPECIFICATIONS
Min
Bead Series SIZE Pattern Index Index 2 PR Type APPROVED Index
Dual
RIMS

137

22.5 70 275/70R22.5 PAU561 148/145J (152/148E) 16 TL 8.25 7.50 276 958 446 2922 19.0 311 3150 2900 148

(3550) (3150) 145

22.5 70 315/70R22.5 PW210 154/150L (152/148M) 18 TL 9.00 9.75 312 1014 467 3093 14.5 351 3750 3350 154

PW610 154/150L (152/148M) 18 TL 20.5 (3550) (3150) 150

PW622+ 154/150L (152/148M) 18 TL 23.0

22.5 65 385/65R22.5 PW802 158L (160K) 18 TL 11.75 12.25 389 1072 501 3248 15.0 - 4250 - 158

PW902+ 158L (160K) 18 TL 14.0 (4500) 160

PTR721 160K (158L) 18 TL 15.5

PAM532 160K (158L) 18 TL 17.9

PTL711 160K (158L) 18 TL 14.0

22.5 55 385/55R22.5 PSL112 158L (160K) 18 TL 11.75 12.25 389 996 465 3018 15.0 - 4250 - 158

(4500)

22.5 55 385/55R22.5 PW902+ 160K (158L) 20 TL 11.75 12.25 389 996 465 3018 15.0 - 4500 - 160

PTL711 160K (158L) 20 TL 15.0 (4250)

24 100 12.00R24 PW01 156/153K 18 TT 8.5 8.50;9.00 315 1226 572 3739 17.0 344 4000 3650 156

PW02 156/153K 18 TT 17.0 153

PW605 156/153K 18 TT 20.5

30
 Load Capacity by AXLE(kg) and PRESSURE(bar)

"S=single
dex 4.5 4.75 5 5.25 5.5 5.75 6 6.25 6.5 6.75 7 7.25 7.5 7.75 8 8.25 8.5 8.75 9
D=Dual"

7 D 6000 6320 6640 6960 7280 7600 7920 8240 8560 8880 9200

8 S 4260 4430 4600 4770 4940 5110 5280 5450 5620 5790 5960 6130 6300

5 D 8000 8300 8600 8900 9200 9500 9800 10100 10400 10700 11000 11300 11600

4 S 5100 5300 5500 5700 5900 6100 6300 6500 6700 6900 7100 7300 7500

0 D 9200 9550 9900 10250 10600 10950 11300 11650 12000 12350 12700 13050 13400

8 S 5620 5860 6100 6340 6580 6820 7060 7300 7540 7780 8020 8260 8500

0 S 5620 5860 6100 6340 6580 6820 7060 7300 7540 7780 8020 8260 8500 8750 9000

8 S 5900 6140 6380 6620 6860 7100 7330 7570 7800 8030 8270 8500 8730 8500

0 S 6250 6500 6760 7010 7260 7510 7760 8010 8260 8510 8750 9000 9250 9490 9000

6 S 5470 5700 5930 6160 6390 6620 6850 7080 7310 7540 7770 8000

3 D 10090 10500 10910 11320 11730 12140 12550 12960 13370 13780 14190 14600

31
 Regrooving of Radial Tyre

PW202 PW210 PW610

Size A(mm) Size A(mm) Size A(mm) B(mm)

9R22.5 7-9 315/70R22.5 7-9 215/75R17.5 7-9 7-9
11R22.5 7-9 295/80R22.5 7-9 235/75R17.5 7-9 7-9
12R22.5 7-9 315/80R22.5 7-9 315/70R22.5 7-9 7-9
295/80R22.5 7-9 7-9
315/80R22.5 7-9 7-9

PW630 PW902+ PTL711

Size A(mm) B(mm) Size A(mm) Size A(mm)

385/55R22.5 9-11 215/75R17.5 7-9

295/80R22.5 7-9 3-5
385/65R22.5 9-11 235/75R17.5 7-9
265/70R19.5 7-9
285/70R19.5 9-11
385/55R22.5 9-11
385/65R22.5 9-11

32
PW02 PW212 PW215

Size A(mm) Size A(mm) Size A(mm)

8.25R16 LT 6-8 215/75R17.5 6-8 235/75R17.5 7-9
7.50R20 6-8 235/75R17.5 6-8 9.00R20 7-9
8.25R20 6-8 245/70R19.5 6-8 10.00R20 7-9
9.00R20 7-9 265/70R19.5 6-8 11.00R20 7-9
10.00R20 7-9 285/70R19.5 6-8 12.00R20 7-9
11.00R20 7-9 10.00R20 6-8 13R22.5 7-9
12.00R20 7-9 11.00R20 6-8 315/80R22.5 7-9
11R22.5 7-9 12.00R20 6-8
12.00R24 7-9 11R22.5 6-8
255/70R22.5 6-8

PW602

Size A(mm) B(mm)

11R22.5 8-10 5-7
12R22.5 8-10 5-7
295/80R22.5 8-10 5-7

33
 Regrooving of Radial Tyre

PW612 PW622/PW622+ PW802

Size A(mm) B(mm) Size A(mm)

Size A(mm)
9.00R20 8-10 7-9 385/65R22.5 9-11
7.50R16 LT 7-9
10.00R20 8-10 7-9
8.25R16 LT 7-9
245/70R19.5 7-9 11.00R20 8-10 7-9

265/70R19.5 7-9 12R22.5 8-10 7-9

315/70R22.5 8-10 7-9
315/80R22.5 8-10 7-9
295/80R22.5 8-10 7-9
315/80R22.5 8-10 7-9

PTR721 PW605 PDM331

Size A(mm) Size A(mm) Size A(mm)

385/65R22.5 8-10 9.00R20 10-12 315/80R22.5 10-12
10.00R20 10-12
11.00R20 10-12
12.00R20 10-12
13R22.5 10-12
315/80R22.5 10-12
12.00R24 10-12

34
PW01 PAM532

Size A(mm) Size A(mm) B(mm)

7.50R16 LT 8-10 385/65R22.5 10-12 7-9
8.25R16 LT 8-10
8.25R20 8-10
9.00R20 8-10
10.00R20 8-10
11.00R20 8-10
12.00R20 8-10
11R22.5 8-10
13R22.5 8-10
315/80R22.5 8-10
12.00R24 8-10

35
CONTACT

Subsidiary contact details

Sales contact

Primewell contact

36
NOTE

37
GITI TIRE (Europe) B.V.
[email protected]

Printed on recycled paper