1 10791 Msds
1 10791 Msds
1 10791 Msds
1. Identification
Product identifier
Product name BELZONA® 5851 (HA-BARRIER)
Uses advised against The product should not be used for purposes other than those recommended in the
appropriate Instructions For Use (IFU) leaflet.
2. Hazard(s) identification
Health hazards Skin Irrit. 2 - H315 Eye Irrit. 2B - H320 Skin Sens. 1 - H317
Reference The full text for all hazard statements is displayed in Section 16.
Label elements
Hazard symbols
1/10
Revision date: 10/24/2022 Revision: 7.5
Other hazards
Not applicable.
3. Composition/information on ingredients
Mixtures
BIS[4-(2,3-EPOXYPROPOXY)PHENYL]PROPANE 5-10%
CAS number: 1675-54-3
4. First-aid measures
Inhalation Remove to fresh air. Keep the patient warm and at rest. Give nothing by mouth.
Ingestion If accidentally swallowed obtain immediate medical attention. Keep at rest. Rinse mouth with
plenty of water. Do NOT induce vomiting.
Skin Contact Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use
a proprietary skin cleaner. Do NOT use solvents or thinners. If irritation or inflammation
persists, seek medical attention.
Eye contact Contact lenses should be removed. Irrigate copiously with clean, fresh water for at least 15
minutes, holding the eyelids apart, and seek medical advice.
2/10
Revision date: 10/24/2022 Revision: 7.5
5. Fire-fighting measures
Extinguishing media
Suitable extinguishing media Use: sand, alcohol resistant foam, carbon dioxide, chemical powder, or water fog for larger
fires.
Do NOT use water jet.
Hazardous combustion In a fire, hazardous decomposition products such as smoke, carbon monoxide and carbon
products dioxide may be produced.
Environmental precautions
Environmental precautions Prevent product entering drains or sewers. In the event of a spill or accidental release, notify
relevant authorities in accordance with all applicable regulations.
Reference to other sections For personal protection, see Section 8. For waste disposal, see section 13. .
3/10
Revision date: 10/24/2022 Revision: 7.5
Advice on general Wash at the end of each work shift and before eating, smoking and using the toilet. Ensure
occupational hygiene eye wash facilities (fountain, bottle, vials, etc.) are readily available. Do not put contaminated
articles or equipment e.g. spatulas, applicators, brushes, cloths etc., into pockets. Where
necessary, contaminated work clothing and shoes should be removed to prevent cross
contamination of surfaces and the risk of inadvertent skin contact and ingestion.
Control parameters
Occupational exposure limits
No exposure limits known for ingredient(s).
Exposure controls
Appropriate engineering Open containers in a well ventilated area. Use in well ventilated areas or provide adequate
controls mechanical ventilation. Where reasonably practicable adequate ventilation should be
achieved by the use of local exhaust ventilation and good general extraction.
Eye/face protection It is recommended that eye protection, for example safety glasses with side shields or goggles
are worn at all times during the handling and use of this material. .
Hand protection . The breakthrough time of the gloves selected should exceed the expected use period.
Where this is not possible, gloves should be changed in good time, and in any case before the
breakthrough time is exceeded. Where doubt exists, advice should be sought from
manufacturers or vendors of protective gloves in order to determine appropriate types for the
particular circumstances. Barrier creams may help to protect exposed areas of skin but are
not substitutes for full physical protection. They should not be applied once exposure has
occurred. SPECIFIC RECOMMENDATIONS Wear protective gloves made of the following
material: Nitrile rubber. STANDARD APPLICATIONS / EMERGENCY SITUATIONS Medium-
heavy weight gauntlet type gloves that provide wrist protection are suitable.
Other skin and body STANDARD APPLICATIONS Synthetic polyethylene coveralls such as the Tyvek PRO-
protection TECH® or equivalent coveralls manufactured to provide protection against liquid chemicals
should be worn. Grossly contaminated clothing should be removed and the skin washed with
soap and water or a proprietary skin cleaner.
4/10
Revision date: 10/24/2022 Revision: 7.5
Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk
assessment indicates inhalation of contaminants is possible. Respirator selection must be
based on exposure levels, the hazards of the product and the safe working limits of the
selected respirator. It is essential that the concentration of the contaminant(s) in the
application environment does not exceed the applicable occupational exposure limit(s)
multiplied by the Assigned Protection Factor (APF) quoted for the respiratory protective
equipment selected. Respirators are not normally required, but may be required when this
product is used in confined spaces or where adequate ventilation cannot be achieved. Where
necessary, it is recommended that an OSHA/NIOSH approved air-purifying full facepiece or
half-face respirator equipped with appropriate vapor cartridge(s) should be worn. Where the
application environment is likely to be contaminated by significant concentrations of dust then
the appropriate particulate prefilter (N-, R- or, P-series) should be worn in combination with
the above. It is essential that the facepiece is correctly fitted and the filter is changed in
accordance with the manufacturer's instructions. In confined or poorly-ventilated spaces, a
supplied-air respirator must be worn.
Immediate danger to life and Where entry into unknown or Immediately Dangerous To Life or Health (IDLH) atmospheres is
health required, an OSHA/NIOSH approved pressure-demand self-contained breathing apparatus
(SCBA) with a full facepiece or a pressure-demand supplied-air respirator (SAR) with a full
facepiece in combination with an auxiliary pressure-demand SCBA respirator should be worn.
Color Grey.
pH Not applicable.
5/10
Revision date: 10/24/2022 Revision: 7.5
Other information This section contains typical values for Health, Safety and Environmental guidance only and is
not intended to represent a technical specification for the product.
Reactivity There are no known reactivity hazards associated with this product.
Stability Stable under recommended storage and handling conditions (see Section 7).
Possibility of hazardous No hazardous reactions expected when stored and handled as recommended.
reactions
Conditions to avoid There are no known conditions that are likely to result in a hazardous situation.
Materials to avoid Keep away from oxidizing agents and strongly alkaline and strongly acidic materials to
prevent the possibility of exothermic reaction.
Hazardous decomposition Does not decompose when used and stored as recommended.
products
Skin corrosion/irritation
Animal data Irritating to skin.
Respiratory sensitization
Respiratory sensitization Based on available data the classification criteria are not met.
Skin sensitization
Skin sensitization Based on the properties of the epoxy constituent(s) and considering toxicological data on
similar preparations, this preparation may be a skin sensitizer. Repeated skin contact may
lead to sensitization with possibly cross-sensitization to other epoxies.
Genotoxicity - in vivo Based on available data the classification criteria are not met.
Carcinogenicity
Carcinogenicity Based on available data the classification criteria are not met.
6/10
Revision date: 10/24/2022 Revision: 7.5
Reproductive toxicity
Reproductive toxicity - fertility Based on available data the classification criteria are not met.
Reproductive toxicity - Based on available data the classification criteria are not met.
development
Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.
Medical considerations Skin contact constitutes a pronounced hazard. Persons with a history of skin sensitization
problems should only be employed in processes in which this product is used under
appropriate medical supervision.
BIS[4-(2,3-EPOXYPROPOXY)PHENYL]PROPANE
Toxicological effects Repeated skin contact may lead to sensitization with possibly cross-sensitization to
other epoxies. In rare cases, low molecular weight liquid epoxy resins can cause an
allergic respiratory reaction like asthma, based on limited human information. The
evidence available is not however, considered to fall within the classification criteria
as laid out within the OSHA Hazard Communication Standard nor the Controlled
Products Regulations.
Ecotoxicity There is no data on the product itself. The following information is provided on the basis of the
individual component data available.
Toxicity Based on the epoxy resin content, this product is expected to have experimental
LC50/EC50/IC50 values between 1 and 10 mg/l in most sensitive species.
Bioaccumulative potential
Bio-Accumulative Potential Based on the epoxy resin content, this product is expected to bioaccumulate.
Mobility in soil
Mobility There is no data available on the product itself.
7/10
Revision date: 10/24/2022 Revision: 7.5
General This product is not regulated for transport by US DOT, and qualifies for exemption (TDG
1.45.1) if shipped on land in Canada. Labeling and packaging requirements may vary with
pack and load size. Please refer to the current transport regulations. Transport within user's
premises: always transport in closed containers that are upright and secure. Ensure that
persons transporting the product know what to do in the event of accident or spillage.
UN Number
UN No. (TDG) 3082
Proper shipping name (IMDG) Environmentally hazardous substance, liquid, n.o.s. (containing Epoxy resin mixture)
Proper shipping name (ICAO) Environmentally hazardous substance, liquid, n.o.s. (containing Epoxy resin mixture)
TDG class 9
IMDG Class 9
ICAO class/division 9
Packing group
TDG Packing Group III
Environmental hazards
8/10
Revision date: 10/24/2022 Revision: 7.5
National regulations
The provisions of the Health and Safety at Work Act and the Control of Substances
Hazardous to Health Regulations with amendments apply to the use of this product at work.
US Federal Regulations
SARA 313 Emission Reporting
SECTION 313: This product does not contain toxic chemical subject to the reporting requirements of Section 313 of Title III
of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR Part 372.
US State Regulations
State Regulations Comments U.S California Safe Drinking Water & Toxic Enforcement Act (Proposition 65): WARNING:
This product contains a chemical known to the State of California to cause birth defects or
other reproductive harm.
Inventories
Canada - DSL/NDSL
All the ingredients are listed or exempt.
US - TSCA
All the ingredients are listed or exempt.
General information The information contained within this safety data sheet does not constitute the users own
assessment of workplace risks as may be required by other Local Regulations. As the specific
conditions of use of the product are outside the supplier's control, the user is responsible for
ensuring that the requirements of relevant Local Regulations are complied with. To the best of
our knowledge, the information contained herein is accurate. However, some of the
information presented and conclusions drawn are derived from sources other than direct test
data on the product itself and while Belzona Inc. believes such sources to be reliable, the
information is provided without any warranty regarding its correctness.
Since Belzona Inc. has no control over the conditions under which the product will be used,
liability will not be assumed to exceed replacement or refund of the purchase price of this
product. Except as stated herein, there are no express or implied warranties including implied
warranties of merchantability or fitness for a particular purpose. Belzona Inc. assumes no
liability for injury or incidental or consequential damage arising out of the storage, handling,
use or, disposal of this product.
9/10
Revision date: 10/24/2022 Revision: 7.5
Training advice For further information please contact your supplier, Belzona consultant or Belzona direct.
Revision comments REVISION. This safety data sheet has been revised in the following Section(s): 1, 2, 3, 5, 6,
7, 8, 11, 12, 15, Please observe the REVISION DATE. Should you be reading a material
safety data sheet that is more than 24 months old or have concerns over its validity, please
contact your local Belzona Distributor or Belzona direct ([email protected]) and the most
current information will be sent to you.
Revision 7.5
10/10