Copyright 2020, Newfangled Audio

P/N: 141344 Rev 4

Newfangled Audio and Pendulate are trademarks of Orthogonal Art
and Science, LLC.
AAX and Pro Tools are trademarks of Avid Technology. Names and logos
are used with permission.
Audio Units is a trademark of Apple, Inc.
VST is a trademark of Steinberg Media Technologies GmbH.
All other trademarks contained herein are the property of their respec-
tive owners.

Newfangled Audio
www.newfangledaudio.com

I
Contents

1 Newfangled Audio Pendulate 1

2 Navigation Bar 3
2.1 UNDO/REDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 A/B COMPARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.3 LIBRARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3.1 SEARCH and FILTERS . . . . . . . . . . . . . . . . . . . . 4
2.3.2 PRESET LIST . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3.3 PRESET INFO . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3.4 PLUGIN UI . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.4 PRESET SELECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.5 SAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.5.1 PRESET NAME . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5.2 SET AS DEFAULT . . . . . . . . . . . . . . . . . . . . . . . 7
2.5.3 HEART ICON . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5.4 SAVE BUTTON . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5.5 EXPORT BUTTON . . . . . . . . . . . . . . . . . . . . . . . 7
2.5.6 PLUGIN UI and DESCRIPTION . . . . . . . . . . . . . . . 8
2.5.7 CATEGORY . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.5.8 AUTHOR . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.5.9 TAGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.5.10 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . 8
2.6 MPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7 RND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8 SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.2 GRAPHICS . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.3 PRESETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.4 MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.8.5 TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.9 Resize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3 Preset Bar 12
3.1 Preset Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2 Preset Load and Save Buttons . . . . . . . . . . . . . . . . . . 12
3.3 Compare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.4 Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

II
 3.5 Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.6 SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.6.1 RENDERING . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.6.2 VISUALIZATIONS . . . . . . . . . . . . . . . . . . . . . . . 13
3.6.3 SHOW CONTROLS . . . . . . . . . . . . . . . . . . . . . 14
3.6.4 SHOW CABLES . . . . . . . . . . . . . . . . . . . . . . . . 14
3.6.5 PITCH BEND LOCK . . . . . . . . . . . . . . . . . . . . . 14
3.6.6 MIDI LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.6.7 TIMBRE MIDI CC . . . . . . . . . . . . . . . . . . . . . . . 14
3.6.8 TUNING MASTER . . . . . . . . . . . . . . . . . . . . . . . 14
3.7 MPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.8 RND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.9 Color Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.10 Resize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4 Parameters and Metering 16

4.1 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.2 Patching Modulation . . . . . . . . . . . . . . . . . . . . . . . . 16
4.3 MIDI Learn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.4 Main Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.4.1 Double Pendulum . . . . . . . . . . . . . . . . . . . . . 18
4.4.2 Wavefolder . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.4.3 Low Pass Gate . . . . . . . . . . . . . . . . . . . . . . . 21
4.5 Modulators and Global Voice Settings . . . . . . . . . . . . . 22
4.5.1 Global Voice Settings . . . . . . . . . . . . . . . . . . . 22
4.5.2 ADSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.5.3 LFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.5.4 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5 Installation and Instantiation 28

5.1 Installing Your Plug-In . . . . . . . . . . . . . . . . . . . . . . . . 28
5.2 Removing or Uninstalling your Plug-In . . . . . . . . . . . . . . 28

6 Conclusion 30

7 About Newfangled Audio 31

III
Chapter 1

Newfangled Audio
Pendulate

1
cha·os
1. (Physics) behavior so unpredictable as to appear random, owing
to great sensitivity to small changes in conditions. Pendulate is a
synthesizer built on a chaotic oscillator.
2. the formless matter supposed to have existed before the creation
of the universe.
Pendulate is a monosynth loosely based on a "West Coast" architecture
(referring to synthesizers designed by Buchla and Serge), however, it uses
a chaotic oscillator based on the physics of a double pendulum.
The double pendulum is chaotic in the mathematical sense: what ini-
tially looks like randomness contains underlying patterns, interconnect-
edness, constant feedback loops, repetition, self-similarity, fractals, and
self-organization. When designing the Pendulate oscillator we took great
care to bring out these underlying patterns and create an oscillator that
can smoothly fade from a sine wave to total chaos, with an expanse of
territory to explore in between.
The output of the double pendulum oscillator is run through a wave-
folder section, and followed by a low pass gate. Every parameter in all
three sections can be modulated by an envelope generator, an LFO,
and MIDI and MPE controllers.
The manual will break out each of these sections and give you some tips
about how to get most out of this unique synth.

2
Chapter 2

Navigation Bar

At the very top of the plug-in is a navigation bar which allows you to
undo and redo changes, access the preset librarian, settings, and man-
age several other global features of the plug-in.

2.1 UNDO/REDO
On the far left is an UNDO and REDO button. After changing any plug-in
parameter in the plug-in interface the UNDO button will activate. Press-
ing it at this point will undo this action. At this point the REDO button will
become active, and pressing it will redo this action. Multiple levels of
undo are available and you can move back through several changes
to reach an earlier state.

2.2 A/B COMPARE

Next you’ll find buttons labeled A/B and A>B. These two buttons allow
you to easily toggle between two states of the plug-in and compare
the sounds. By default the plug-in is in the A state and you’ll notice that
the "A" is highlighted. In this state pressing the A>B button will copy the
A state to the B state. Toggling the A/B button will switch to the B state,
highlighting the "B" and switching the A>B button to B>A (allowing you
to copy the B state to the A state).
Any changes you make in the plug-in interface will update the high-
lighted state. In this way, you can copy the A state of the plug-in to the B
state, make changes to the A state, and use the A/B button to compare
these two states.

3
2.3 LIBRARY
The Library button launches the Preset Librarian which can be used to
explore the plug-ins presets based on any combination of category, au-
thor, tags, or favorites.

The Preset Librarian is split into four main sections.

2.3.1 SEARCH and FILTERS

The top of the Preset Librarian shows the BANKS, SEARCH BAR, and FIL-
TERS.
Typing a phrase into the search bar will allow you to search all the presets
by a given phrase. You can further restrict this search by selecting a
BANK or FILTERS.
Pressing the BANKS button opens a screen which allows you to restrict
your search to the presets in either the FACTORY or USER bank. Or addi-
tional preset banks if you have any installed.
Pressing the FILTERS button opens a screen which allows you to restrict
your search to presets matching a specific CATEGORY, AUTHOR, or one
of several TAGS. Additionally, you can restrict your search to FAVORITES if
desired.

4
2.3.2 PRESET LIST
The bottom of the Preset Librarian shows the list of presets which match
the current criteria. It displays the FAVORITE status using a heart icon, the
preset NAME, the preset CATEGORY, the preset AUTHOR, and the preset
BANK. You can sort the list by any of these. The up and down arrows on
your keyboard will allow you to toggle through the presets.

2.3.3 PRESET INFO

The center right of the Preset Librarian displays information about the
currently loaded preset. This area shows the preset name, a short de-
scription if available, the category, the preset author - including a link to
their work, the preset’s tags, and its bank.

2.3.4 PLUGIN UI
The center left of the Preset Librarian displays a miniature version of the
plug-in UI. This plug-in UI is not editable, but it is live and will show you
the current settings of the plug-in, as well as any meters. We’ve found it
incredibly useful to see this display as we’ve toggled through presets to
get a sense of what each preset does.

5
2.4 PRESET SELECTOR

In the center of the navigation bar is a dropdown preset selector. Click-

ing on this preset selector will show you the plug-ins presets in several
views.
1. All will show you all the presets in alphabetical order.
2. Favorite will show you all your favorite presets in alphabetical order.
3. Filtered will show you all the presets which correspond to the cur-
rent filter in alphabetical order. This filter is set up in the preset librar-
ian.
4. Underneath these the presets are displayed according to their Cat-
egory, as assigned when a preset is saved.
Once you load a preset from this dropdown list the Left and Right arrow
buttons allow you to toggle through the selected subgroup in order. For
more advanced preset selection click the LIBRARY button to enter the
preset librarian.
Additionally, if you like the sound of the current preset you can click the
heart icon to set the loaded preset as a favorite. If a loaded preset is
modified the heart icon will become an asterisk and the preset name is
italicized, indicating that the current sate no longer matches that of the
saved preset.

2.5 SAVE
The SAVE button launches the preset save screen where you can save a
preset and assign categories, tags, and descriptions, as well as set the
default state of the plug-in.

6
2.5.1 PRESET NAME
This field sets the preset name. There can only be one preset with a given
name.

2.5.2 SET AS DEFAULT

This button will set the current state of the plug-in as a plug-ins default.
This means when you load the plug-in the it will default to these set-
tings.

2.5.3 HEART ICON

This will mark this preset as a favorite when you save it.

2.5.4 SAVE BUTTON

This button saves the preset

2.5.5 EXPORT BUTTON

In order to be browsed by the plug-in the presets are saved in a partic-
ular folder. However, if you want to save the preset elsewhere on your
computer you can use the EXPORT button to export it as a file.

7
2.5.6 PLUGIN UI and DESCRIPTION
This section shows the current settings of the plug-in, and how it will ap-
pear in the preset librarian.

2.5.7 CATEGORY
Set the category for the preset you are saving. A preset can have only
one category. If the preset doesn’t fit into any of the existing categories
you can use the [+] button to create a new one.
The existing categories are based on those that are found in the existing
presets. If you create a new one it will appear in this list with an "X" on it.
If you decide not to use the newly created CATEGORY you can remove
it by clicking on the "X". However, once the preset is saved this category
will be permanent and available to all newly saved presets, unless you
delete all presets which use it.

2.5.8 AUTHOR
The AUTHOR section allows you to add your name and a url if you main-
tain a presence on the web. This will be automatically populated with
the information from the last saved preset, so you will only likely need to
enter it once.

2.5.9 TAGS
You can add any number of TAGS to a saved preset. These TAGS will
allow your preset to be found in the preset librarian. It’s best to add the
tags that apply to the preset, and don’t add the ones that don’t. You
can create a new tag using the [+] button.
The existing tags are based on those that are found in the existing pre-
sets. If you create a new one it will appear in this list with an "X" on it.
If you decide not to use the newly created TAG you can remove it by
clicking on the "X". However, once the preset is saved this tag will be per-
manent and available to all newly saved presets, unless you delete all
presets which use it.

2.5.10 DESCRIPTION
If desired you can add a short description to the preset. It’s best to use
this field to add information about what a preset is for, or any hints for a
user about how to use it.

2.6 MPE
Generate supports a relatively new MIDI mode called Midi Polyphonic
Expression, or MPE. If you’re using an MPE compatible controller and an

8
MPE compatible host, turning on the MPE button will allow you to have
polyphonic pitch bend, pressure, and timbre controls. Generate is al-
ready amazing with a normal midi setup, but MPE allows you to add
another level of expressiveness.

2.7 RND
Generate also has a random preset generator. You can engage this by
hitting the RND button.

2.8 SETTINGS
The SETTINGS button pops down a settings page which contains addi-
tional options. They are sorted into 4 tabs.

2.8.1 GENERAL
INSTALLED VERSION

This displays the version number that is currently installed. If you are run-
ning the latest version it will tell you. If there is an update an UPDATE
button will appear. Clicking this button will bring you to the downloads
page where you can get the latest version.

USER GUIDE

Pressing the SHOW button will launch this user guide.

2.8.2 GRAPHICS
SHOW METERS

The SHOW METERS button will show or hide the additional meters in the
plug-in. Specifically, turning it off will hide the glow in the RADAR control,
the envelope graph behind the LEVEL DETECTOR section, and the curve
graphic behind the CURVE section.

BRIGHTNESS

The BRIGHTNESS control will control the brightness of the glow in the
RADAR control, the envelope graph behind the LEVEL DETECTOR sec-
tion, and the curve graphic behind the CURVE section.

9
OPENGL GRAPHICS RENDERING

The USE OPENGL button will enable OpenGL rendering of the UI. For this
setting to take effect you must close and reopen the UI. If you that the
plug-in UI renders better with OpenGL on or off on your computer you
can save this as the default setting and new instantiations will always
load using this setting.

COLOR SCHEME

The COLOR SCHEME dropdown will allow you to choose one of several
different color schemes for your viewing pleasure.

SHOW CONTROLS

Alternatively the SHOW CONTROLS button will turn the UI controls on or

off. When the UI controls are off you can’t modify the settings, but you
can look at the visualizations.

SHOW CABLES

The SHOW CABLES button will turn the modulations cables on all the
time, rather than dynamically showing them while you’re patching.

2.8.3 PRESETS
PRESETS FOLDER

Clicking the REVEAL button will bring you to the presets folder. This is only
necessary if you want to share you presets with someone else, or access
these files for another reason.

DEFAULT SETTINGS

Pressing the SAVE button will save all the current settings as the default
for the plug-in. This is useful if you’d like a different starting point than the
one we’ve provided.

PITCH BEND LOCK

The PITCH BEND LOCK button allows you to lock the amount of PITCH
BEND as you scroll through presets. Many people prefer a certain PITCH
BEND amount on all presets, and many MPE controllers require this to
have the same setting as the controller.

MIDI LOCK

The MIDI LOCK button prevents preset loading from altering your midi
mappings.

10
2.8.4 MIDI
TIMBRE MIDI CC

The TIMBRE MIDI CC knob allows you to override the MIDI controller mes-
sage which is routed to the TIMBRE modulation output. By default this is
set to MIDI CC #74, which is often set as the Y-Axis on MPE controllers,
but you can change this to be any MIDI CC and use it to route your
controller into the modulation engine. When MPE is active, Midi Learn
functionality for the selected TIMBRE MIDI CC is disabled.

2.8.5 TUNING
TUNING MASTER

Generate defaults to the standard 12-TET Equal Temperament tuning,

however, it has support for alternate tuning systems via the MTS-ESP sys-
tem from ODDSound. When an MTS-ESP Master plug-in is instantiated
(like the free MTS-ESP MINI plug-in from ODDSound) Generate will con-
nect to it and receive scale and tuning information from it. To check
connection status and active scale look for the TUNING MASTER and
SCALE fields on the SETTINGS page.

2.9 Resize
The bottom right corner of the UI will allow you to resize the plug-in. To
change the default plug-in size drag the plug-in to the desired size and
save over the default preset.

11
Chapter 3

Parameters and Metering

3.1 Controls
Pendulate has several control types, including vertical sliders, rotary knobs,
drop-down menus, and toggle and radio buttons, all of which have tool-
tips which will give you more information about their function if you hover
your mouse above them.
In general, all sliders and knobs can be double clicked to type in a spe-
cific value, option-clicked (alt-click on windows) to return them to their
default value, or command-clicked or control-clicked to enter a vernier
mode for fine tuning.

3.2 Patching Modulation

The large knobs in Pendulate allow you to patch up any of the Modu-
lation Outputs to each control. There is no limit on the number of mod-
ulation connections that can be created. When you click on a Modu-

12
lation Output a small square knob appears below each modulateable
control. When the Modulation Output is highlighted you can patch it to
a control by clicking on the small square knob, or, turn the small square
knob to dial in just a small amount of modulation. When the small square
knob is set to top dead center, there is no modulation being applied.
Turn to the right to add the modulation signal, or turn to the left to sub-
tract it.
Alternatively, you can patch multiple Modulation Outputs to a knob by
clicking the [+] button under a knob. Doing this will turn each Modulation
Output into a knob which will control the amount of that modulation
output routed to that control.
Clicking on an existing modulation knob will toggle it between its cur-
rent value and off. Right clicking it will totally clear the modulation route.
Moving your mouse off of a modulation route that’s set to 0 will remove
it from the UI.
If too many Modulation Outputs are routed to one knob the UI will dis-
play ellipses (...) to show that all the connections cannot be displayed,
but you can still modify these connections by clicking the [+] button.

A parameter knob that is connected to a modulator will give visual feed-

back on the amount of modulation being applied to the signal as the
orange glow becomes more saturated, the parameter is more strongly
affected.

3.3 MIDI Learn

Pendulate’s toggle buttons and knobs can be mapped to any MIDI con-
troller number.
Hold down right click on a control to initiate MIDI Learn. The control
will change colors to indicate that it’s in learn mode, and will stay in
learn mode for 1 second after the right click is released. While in learn

13
mode, any incoming MIDI control messages will link the control to the
message’s corresponding controller number.
Once a control has been learned you can clear it by right clicking the
control, this will return the control to the default color.

Hovering over the control to reveal the tooltip will also show the cur-
rent midi controller mapping as well as an asterisk if the mapping has
been disabled due to conflict with Generate’s TIMBRE MIDI CC setting.
In order to replace a midi mapping, simply repeat the actions outlined
above—the new MIDI controller number will overwrite the existing one. In
order to completely clear a midi mapping, simply right click the desired
control and release the click without moving any MIDI controllers.

3.4 Main Voice

The top half of Pendulate is broken into three main synth voice sections,
the DOUBLE PENDULUM, the WAVEFOLDER, and the LOW PASS GATE (LPG).
The bottom half contains the Modulation Outputs, the Modulation Page
buttons, the Effect Page buttons, the display area for the selected page,
and the Output Level section.

3.4.1 Double Pendulum

This section control the DOUBLE PENDULUM and associated oscillators.
The DOUBLE PENDULUM page is actually comprised of 4 "oscillators": a
sine wave oscillator at the keyed note - representing the first arm of the
double pendulum, a chaotic "oscillator" called a generator which inter-
acts with the sine wave oscillator - representing the second arm of the
double pendulum, and two sub oscillators 1 and 2 octaves below the
keyed noted.

14
Chaos Amount

The CHAOS AMOUNT knob blends between the keyed sinewave oscilla-
tor and the chaotic generator, you can think of it as a ratio between the
length of the first pendulum arm and the second. The chaotic generator
often has higher harmonics than the keyed oscillator, so it usually sounds
brighter - but not always.

Chaos Shape

The CHAOS SHAPE changes the shape of the chaotic generator. This is
where the magic happens, turning it up usually means less predictability
but not always. Small changes can sometimes make a big difference,
but hey, it’s a chaos generator.

Animate

The ANIMATE knob detunes the chaotic generator from the keyed oscil-
lator to add motion to the sound. It’s a very unique effect.

Interval

The INTERVAL dropdown sets the relative interval between the keyed os-
cillator and the chaotic generator. The effect of this is really only appar-
ent when the Chaos Shape is at or near 0. When Chaos Shape is much
higher than that there is a subtle effect, but it’s mostly swamped by the
chaotic system.

Osc Sync

The OSC SYNC button syncs the chaotic generator to the keyed oscil-
lator. This can drastically change the sound and often has the effect
of dropping the apparent sound an octave and adding gritty harmon-
ics.

15
Sub 1

The SUB 1 knob controls the level of the 1-octave-down sub oscillator.

Sub 2

The SUB 2 knob controls the level of the 2-octave-down sub oscillator.

3.4.2 Wavefolder
A wavefolder is a type of waveshaping that folds the wave back on it-
self several times. This creates a rich set of harmonics for the input signal
and is a type of additive synthesis originated by Buchla and common
in modular synthesis. The knobs control the shape of the wavefolding,
and therefore, the harmonics generated. Modulating the wavefolder
creates a set of moving harmonics that sound quite interesting and
pleasant. The wavefolder in Pendulate is based loosely on the one in
the Buchla 259 complex oscillator.

Drive

The DRIVE knob sets the amount of drive going into the wavefolder.

Folds

The FOLDS knob controls the number of folds the wavefolder is adding
to the signal. More folds produces more harmonics. You may need to
drive this wavefolder harder to see all the folds.

Mix

The MIX knob controls the mix between the dry input and the wavefolder
output.

16
Symmetry

The SYMMETRY knob controls the DC offset into the wavefolder, by mak-
ing the fold asymmetric it can add even harmonics to the output, in-
stead of just odd harmonics. This can sound really great when modu-
lated.

Cutoff

The CUTOFF control modulates the cutoff frequency of a gentle (6dB/octave)

low pass filter. The filter’s cutoff defaults at 1.3kHz, the cutoff point used
in the 259’s output filter.

3.4.3 Low Pass Gate

A Low Pass Gate (LPG) is a combination of a VCA and Low Pass Filter
which can create a very natural, pleasing sound. The one used in Pen-
dulate is a modified version of one based on a design by Don Buchla.

Key Track

KEY TRACK allows the cutoff frequency of the LPG to be set by the note
you’re playing. If KEYTRACK is 0% the cutoff frequency of the LPG is not
effected by the note value and is set by the FREQUENCY knob only. If
it’s 100% it is modified by the FREQUENCY knob, but also scales with fre-
quency so all notes will have the same timbre.

Frequency

The FREQUENCY knob loosely controls the maximum cutoff of the filter.
It’s not exact because the underlying modeled circuit doesn’t really
map to frequency well.

Resonance

The RESONANCE knob controls resonance of the LPG filter when the
POLES control is turned greater than 1. This control is not active at all

17
when POLES is at 1 and becomes more apparent the higher POLES is
turned.

Poles

The POLES knob morphs between a VCA style Low Pass Gate (one pole
low pass filter) and a resonant (three pole) Low Pass Filter. Modulate
it.

Attack

The ATTACK slider controls the attack time of the ADSR which drives the
LPG.

Decay

The DECAY slider controls the decay time of the ADSR which drives the
LPG.

Sustain

The SUSTAIN slider controls the sustain level of the ADSR which drives the
LPG.

Release

The RELEASE slider controls the release time of the ADSR which drives the
LPG.

3.5 Modulators and Global Voice Settings

Pendulate contains several modulation sources that can be applied to
the main voice.

3.5.1 Global Voice Settings

The Global Settings page allows you you to set the main parameters for
voice and pitch. The modulation outputs situated above the GLOBAL
parameter button allows you to map MIDI and MPE modulation sources
to different parameters.
The Global Page contains modulation sources that come from the key-
board or midi sequencer and parameters which are global to Pendu-
late.

18
Octave

The OCTAVE knob selects the base octave for the synth. This can be
anywhere from -2 to +2 octaves.

Stereo

The STEREO button allows you to select between STEREO and monaural
output.

Pitch Bend

The PITCH BEND knob controls the Pitch Bend amount. This is useful in
general. When MPE is active this must be set to the same amount as the
MPE controller to work correctly.
To prevent this setting being overwritten when a preset loads, enable
Pitch Bend Lock in the Settings menu.

Pitch Modulation

The PITCH BEND knob is also a modulation destination. This allows you
to route any modulation output to the Master Pitch, allowing you to do
vibrato, pitch stabs, and more. The total amount of pitch modulation
available is set by the PITCH BEND knob.
Hint: To add vibrato, route an LFO Triangle wave to the master pitch.
Then route the MOD WHEEL output to the LFO OUTPUT LEVEL modulation
control.

Legato

The LEGATO button toggles a legato mode. When LEGATO is off, each
note press will go through the entire ADSR cycle. However, when LEGATO
is on, only staccato notes will trigger a new attack, legato notes will
not.

Portamento

The PORTAMENTO knob controls the Portamento time in mS.

19
Always

When ALWAYS is active, portamento will always be applied to all new

notes. When inactive, portamento will only occur for notes that have
been activated while another note is already playing. Great when com-
bined with LEGATO!

Global Modulation Outputs

These modulation outputs allow common MIDI and MPE controller sig-
nals to be mapped to parameters.

1. VEL maps the the current MIDI note’s velocity to any Modulation
Input.
2. MOD maps the MIDI Mod Wheel Output to any Modulation Input.
3. KEY maps the relative pitch from the currently pressed KEY to any
Modulation Input. This can be used for adding key following to any
parameter.
4. PRS maps the midi Pressure output to any Modulation Input. When
MPE is active this is per note.
5. TMB is the MPE Timbre Modulation Output, also known as MIDI CC74.
It’s often mapped to the height along the key on several common
MPE controllers. This is only available when MPE is enabled. Alterna-
tively, TMB can be mapped to output any MIDI CC on the settings
page, so you can use it to patch an expression pedal or other con-
troller into Pendulate’s modulation system.

3.5.2 ADSR
The ADSR creates three modulation signals when a note is pressed. These
are a full ADSR envelope, an AD envelope, and an ASR envelope. All
three of these envelopes can be used as modulators.

20
Loop

The LOOP button detaches the Mod Envelope from the note on control,
and instead loops it, turning it into a second LFO. Instead of setting the
LFO Rate and Shape, you control the speed and shape of the looping
Envelope using the ATTACK, DECAY, SUSTAIN, and RELEASE times. This can
create an interesting, natural, almost throbbing modulation from each
of the ADSR, AD, and ASR outputs.

Attack

The ATTACK slider is the attack time of the envelope in mS.

Decay

The DECAY slider is the decay time of the envelope in mS.

Sustain

The SUSTAIN slider is the sustain level of the envelope.

Release

The RELEASE is the release time of the envelope in mS.

ADSR Outputs

1. ADSR maps the envelope’s ADSR output to a Modulation Destina-

tion.
2. ADR maps the envelope’s ADR output to a Modulation Destination.
This envelope will always return to zero when it has completed its
decay phase, so the Sustain control will not affect its operation. If
a note is released before the envelope has finished decaying, the
signal will continue to decay using the Release time.
3. ASR maps the envelope’s ASR output to a Modulation Destination.
This envelope rises according to the Attack time and remains at
the Sustain level until the note is release. The decay control does
not affect its operation.

3.5.3 LFO
There is an LFO with a sine, triangle, pulse, sawtooth, and ramp out-
put.

21
BEATS

Use this knob to set the LFO Rate in Beats. This knob is only available
when the the TEMPO button is on.

FREQUENCY

Use this knob to set the LFO Rate in Hz. This knob is only available when
the TEMPO button is off.

TEMPO

The TEMPO button toggles whether the BEATS or FREQUENCY knob is ac-
tive.

OUT LEVEL

The OUT LEVEL knob will control the master output level of the LFO. This
might be considered a bit redundant, because there are already level
knobs for every modulation routing, however, because you can mod-
ulate this output level control, this allows you to create more complex
modulation signals by using, for instance, an Envelope to modulate the
amount of LFO being applied to another control. This can be very pow-
erful when used with MPE to allow note dependent control of LFO levels
in real time.

BIPOLAR

By default the LFO outputs are unipolar, meaning they only add mod-
ulation to the position of the knob. However, some desired modulation
routings, like vibrato, require the LFO to modulate around the parame-
ters setting by both adding and subtracting from it. If you wish to do this,
turn on the BIPOLAR button.
In other words, when BIPOLAR is off the LFO outputs draw their shapes
between 0 and 1. When it’s on they draw their shapes between -1 and
1.

22
LFO Outputs

1. Sine outputs a sine wave

2. Triangle outputs a triangle wave.
3. Pulse outputs a pulse wave, also known as a square wave.
4. Saw outputs a down-going sawtooth wave.
5. Ramp outputs an upward-going ramp wave.

LFO Sync

Pendulate’s LFO is designed to synchronize with your DAW’s playhead.

To take advantage of this feature, make sure the playhead is on the first
beat of a measure and press Play—the LFO will now run in time with the
session. When Play is not engaged, the LFO will retrigger on a key press
depending on the legato setting.

3.5.4 Output
This is the final output of the effects section and the level control for the
whole instrument. This control is before the output limiter, so you can turn
it up as much as you’d like, if you’d like to overdrive the limiter. Turning
this knob down to -100dB will mute the output.

The output level meter shows the final output level of the plug-in from
-60dB to 0dB.

23
Chapter 4

Installation and
Instantiation

Newfangled Audio Pendulate is free and contains no licensing. Simply fill

out the form to get a download link to download and install the plug-in.
Once you do you can instantiate it in any supported DAW.

4.1 Installing Your Plug-In

Once you’ve launched the plug-in installer, it will take you through sev-
eral pages of options. We have tried to choose defaults for these options
which will best serve the majority of users, but it is worth a minute to make
sure you understand these options before clicking through to the next
page. A common issue with Windows VST plug-ins is choosing the cor-
rect VST directory, which can be different on each system. Please pay
special attention to this setting. Once you have followed through the in-
staller, your plug-ins and presets should be in your chosen locations, and
you can hit finish to end the installer application.
At this point, you should be ready to use your Pendulate Plug-In.

4.2 Removing or Uninstalling your Plug-In

We’re sure you’ll love your Newfangled Audio plug-ins, but if you ever
want to remove them from your machine it’s as easy as removing the
following files.
For Mac:
• Macintosh HD/Library/Audio/Plug-Ins/Components/<Plug-In Name>.component
• Macintosh HD/Library/Audio/Plug-Ins/VST/Newfangled Audio/<Plug-
In Name>.vst

24
 • Macintosh HD/Library/Audio/Plug-Ins/VST3/Newfangled Audio/<Plug-
In Name>.vst3
• Macintosh HD/Library/Application Support/Avid/Audio/Plug-Ins/Newfangled
Audio/<Plug-In Name>.aaxplugin
• /Music/Newfangled Audio/<Plug-In Name>/
For Windows:
• c:\Program Files\Common\Steinberg\VST2\Newfangled Audio\<Plug-
In Name>.dll
• c:\Program Files\Common\VST3\Newfangled Audio\<Plug-In Name>.vst3
• c:\Program Files\Common\Avid\Audio\Plug-Ins\Newfangled Au-
dio
<Plug-In Name>.aaxplugin
• My Documents\Newfangled Audio\<Plug-In Name>\

25
Chapter 5

Conclusion

We hope you enjoy Newfangled Audio’s Pendulate plug-in. If you have

any questions, comments, or concerns please write us at [email protected]

26
Chapter 6

About Newfangled Audio

The Oxford English Dictionary defines Newfangled as "objectionably new".

Music technology can sometimes be a backward looking pursuit. This
is understandable, the purpose of music technology should be to help
musicians make great music. There have been many great pieces of
gear in the past and we should seek to keep these pieces and make
them available to people who want to use them, and the time and
dedication required to master a musical instrument means that changes
in their design are often evolutionary rather than revolutionary.
However, the great pieces of gear from yesteryear are more often than
not those that contained new ideas in their time. The reverence we
have for these pieces can sometimes turn into fetishism, and mindless
re-creation of classic gear can fail to inspire musicians and artists to take
new risks. It’s important to make sure artists and engineers have access
to good tools that inspire them and don’t stand in their way, but these
tools should never be used as a security blanket to stand in the way of
an artist or engineers ears and taste.
Newfangled Audio seeks to only make gear that incorporates new ideas.
We want to make gear that is great, but only using ideas that others are
not. We realize that deviation from the norm might sometimes be objec-
tionable. The Oxford English Dictionary defines Newfangled as "objec-
tionably new".

27