Scribd
Upload
13 views

Assignment 1

The document describes four Arduino projects: 1) A digital stopwatch using push buttons, 2) A traffic light system using a 7-segment display, 3) Connecting a 16x2 LCD display, and 4) Connecting a 7-segment display in common anode and common cathode configurations. All projects use Proteus simulation software and an Arduino UNO or Mega microcontroller. The project reports will include descriptions, requirements, design strategies, diagrams, Arduino code, and a lab report not exceeding 8 pages.

Uploaded by

Elias Hailu
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
13 views

Assignment 1

The document describes four Arduino projects: 1) A digital stopwatch using push buttons, 2) A traffic light system using a 7-segment display, 3) Connecting a 16x2 LCD display, and 4) Connecting a 7-segment display in common anode and common cathode configurations. All projects use Proteus simulation software and an Arduino UNO or Mega microcontroller. The project reports will include descriptions, requirements, design strategies, diagrams, Arduino code, and a lab report not exceeding 8 pages.

Uploaded by

Elias Hailu
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

1. How to make Digital Stopwatch using Arduino and push buttons.

To demonstrate the solution a lab is setup with proteus software and Arduino UNO/Mega
simulated. The necessary configurations required to achieve the solution is identified.

Project Type: Practical demonstration

Software Requirements

1. Proteus.Pro.8.13.SP0.31525

2. Arduino-Library-master

3. Arduino UNO/Mega 2560/Above

———————————————————————————————————————

Report Contents

1. Project Description

2. Project requirement

3. Project Design strategy

4. Project Design Diagram

5. Arduino Program IDE

6. Lab report of the course

Pages – maximum 8

2. Traffic Lights System using 7 Segment Common Anode Display.


To demonstrate the solution a lab is setup with proteus software and Arduino UNO/Mega
simulated. The necessary configurations required to achieve the solution is identified.

Project Type: Practical demonstration

Software Requirements

1. Proteus.Pro.8.13.SP0.31525

2. Arduino-Library-master

3. Arduino UNO/Mega 2560/Above

———————————————————————————————————————

Report Contents

1. Project Description
2. Project requirement

3. Project Design strategy

4. Project Design Diagram

5. Arduino Program IDE

6. Lab report of the course

Pages – maximum 8

3. How to do connections of 16 x 2 LCD (Liquid crystal display) Display.


To demonstrate the solution a lab is setup with proteus software and Arduino UNO/Mega
simulated. The necessary configurations required to achieve the solution is identified.

Project Type: Practical demonstration

Software Requirements

1. Proteus.Pro.8.13.SP0.31525

2. Arduino-Library-master

3. Arduino UNO/Mega 2560/Above

———————————————————————————————————————

Report Contents

1. Project Description

2. Project requirement

3. Project Design strategy

4. Project Design Diagram

5. Arduino Program IDE

6. Lab report of the course

Pages – maximum 8

4. How to do 7 segment display connections CA and CC using Arduino .


To demonstrate the solution a lab is setup with proteus software and Arduino UNO/Mega simulated.
The necessary configurations required to achieve the solution is identified.

Project Type: Practical demonstration

Software Requirements

1. Proteus.Pro.8.13.SP0.31525
2. Arduino-Library-master

3. Arduino UNO/Mega 2560/Above

———————————————————————————————————————

Report Contents

1. Project Description

2. Project requirement

3. Project Design strategy

4. Project Design Diagram

5. Arduino Program IDE

6. Lab report of the course

Pages – maximum 8

You might also like