Regulador de Carga Ep-Tr10415an

Tracer-AN series
MPPT Solar Charge Controller

(50A-100A)
Product models
Tracer5210AN/Tracer6210AN
品型号
Overview
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and
advanced MPPT control algorithm, with dual-core processor architecture and common negative design,
has the features of high response speed, high reliability, and high industrial standard. MSRT can
guarantee very high conversion efficiency in any charge power, which sharply improves the energy
efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss
rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion
efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the
maximum power point (MPP) of PV array to obtain the maximum energy of the panel. The limitation
function of the charging power and current and automatic power reduction function fully ensure the
stability when works with oversize PV modules and operate under high temperature environment.
With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series
controllers can effectively prolong the life-cycle of battery and significantly improve the system
performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power
system. All-around electronic protections, including overcharging, over discharging, and PV reverse
polarity protection, effectively ensure the safer and more reliable operation of the solar system for a
longer service time. The isolated RS485 interface with standard MODBUS communication protocol and
5V power supply makes it easy for customer to expand the application, Support up to 8 charging in
parallel to expand system and meet with different monitoring requirements, so that can be widely used
for various applications, e.g. solar RV, household system and field monitoring, etc.
Product Features
•CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)

•High quality & low failure rate components of ST and Infineon to ensure the product’s life
•Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
•Maximum DC/DC transfer efficiency is as high as 98.7%
•Advanced MPPT control algorithm will minimize the MPP loss rate and loss time
•The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
•The wider range of MPP operating voltage.
•Auto control system to limit the charging power & current go over the rated value.
•Support 4 charging options: Sealed, Gel, Flooded and User.
•Battery temperature compensation function
•Real-time energy recording and statistical function
•Automatic over-temperature power reduction function
•Hundred percent full load operation in working environment temperature range within charging & discharging
•Support up to 8 units in parallel to expand system

•Load relay control external load switch signal to realize diversified load work modes
•The first and the second disconnection of load control, contain two relay’s contact.
•Auto-control of utility and generator relay design
•Utility or generator auto-control relays make it easy to compose the hybrid power system
•The remote temperature and the voltage sensor design will collect accurate data of battery temperature and
voltage
•Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
•To monitor or set the parameters by using the phone Apps or PC software.
Protection
• PV Over Current/power • PV Short Circuit • PV Reverse Polarity

• Night Reverse Charging • Battery Over Voltage • Battery Over Discharge
• Battery Overheating • Controller Overheating • TVS High Voltage Transients
Accessories
Remote Meter(MT50) Data logger (eLOG01)

Set the controller parameter via Real-time parameter recording
the LCD display of the product through the RS485
communication mode
Bluetooth adapter WIFI adapter

(Box-BLE-01) (eBox-WIFI-01)
with 2m communication cable with 2m communication cable
( for the controller with RS485 ( for the controller with RS485
port ) port )
Communication cable
Remote temperature sensor CC-USB-RS485-150U
RTS300R47K3.81A
USB to RS485 PC communication
(3m)
cable (1.5m)
PT Adapter PT-ADP
Manage to work and
communicate with the 2 to 8
PT-ADP pcs controllers in parallel
Technical specifications
Item
Tracer5210AN Tracer6210AN Tracer5415AN Tracer6415AN Tracer8415AN
Nominal System Voltage 12/24VDC or Auto 12/24/36/48VDC or Auto
Battery Input Voltage

8V～32V 8V～68V
Range
Battery Type Sealed/Gel/Flooded/User

Battery fuse 80A/58V 150A/58V
Rated charge current 50A 60A 50A 60A 80A
625W/12V 750W/12V 625W/12V 750W/12V 1000W/12V
1250W/24V 1500W/24V 1250W/24V 1500W/24V 2000W/24V
Rated charge Power 1875W/36V 2250W/36V 1875W/36V 2250W/36V 3000W/36V
2500W/48V 3000W/48V 2500W/48V 3000W/48V 4000W/48V
100V① 150V①
Max. PV open circuit
92V② 138V②
voltage
(Battery Voltage+2V) (Battery Voltage +2V)

MPP Voltage Range ～72V③ ～108V③
Tracking efficiency ≥99.5%

Conversion efficiency ≤98.7%
Temperature
－3mV/℃/2V(Default)
compensate coefficient
Self-consumption 98mA/12V;60mA/24V;50mA/36V;46mA/48V
Grounding Common negative
Relay Rated Value:5A/30VDC; Max. Value:0.5A/60VDC
RS485 interface RS485(RJ45)
LCD backlight time 60S(Default)
Item
Tracer10415AN Tracer5420AN Tracer6420AN Tracer8420AN Tracer10420AN
Nominal System Voltage 12/24/36/48VDC or Auto
Battery Input Voltage

8V～68V
Range
Battery Type Sealed/Gel/Flooded/User
Battery fuse 150A/58V 80A/58V 150A/58V
Rated charge current 100A 50A 60A 80A 100A
1250W/12V 625W/12V 750W/12V 1000W/12V 250W/12V
2500W/24V 1250W/24V 1500W/24V 2000W/24V 2500W/24V
Rated charge Power 3750W/36V 1875W/36V 2250W/36V 3000W/36V 3750W/36V
5000W/48V 2500W/48V 3000W/48V 4000W/48V 5000W/48V
150V① 200V①
Max. PV open circuit
138V② 180V②
voltage
(Battery Voltage
(Battery Voltage+2V)
+2V)
MPP Voltage Range ～144V③
～108V③
Tracking efficiency ≥99.5%
Conversion efficiency ≤98.7%
Temperature
－3mV/℃/2V(Default)
compensate coefficient
Self-consumption 98mA/12V;60mA/24V;50mA/36V;46mA/48V
Grounding Common negative
Relay Rated Value:5A/30VDC; Max. Value:0.5A/60VDC
RS485 interface RS485(RJ45)

LCD backlight time 60S(Default)
①At minimum operating environment temperature;

②At 25℃ environment temperature
③The maximum PV open circuit voltage must never exceed 138V or 180V at 25℃ environment temperature.
Environmental Parameters
-25℃～+45℃
Ambient temperature range
LCD temperature range -20℃～+70℃
-30℃～+85℃
Storage temperature range
Humidity ≤95%, N.C.
Enclosure IP20
护功能
Mechanical Parameters
Item Tracer5210/5415/5420AN Tracer6210/6415/6420AN

Dimension 261×216×119mm 340×236×119mm
Mounting dimension 180×204mm 260×224mm

Φ7
Mounting hole size
Terminal 6AWG(16mm2) 2AWG(35mm2)
Recommended cable 6AWG(16mm2) 16mm2(5AWG)
Weight 3.5kg 4.5kg
Item Tracer8415/8420AN Tracer10415/10420AN

Dimension 394×240×134mm 394×242×143mm
Mounting dimension 300×228mm 300×230mm

Φ7
Mounting hole size
Terminal 2AWG(35mm2)
Recommended cable 25mm2(4AWG) 35mm2(2AWG)
Weight 6.1kg 7.4kg
BEIJING EPSOLAR TECHNOLOGY CO.,LTD.

BLDG#18,CO.PARK,NO.8 HEYING ROAD,
CHANGPING DISTRICT,BEIJING,CHINA 102200
Tel: 010-82894856 / 82894896
Fax: 010-82894882
www.epever.com.

Regulador de Carga Ep-Tr10415an

Uploaded by

Copyright:

Available Formats

Regulador de Carga Ep-Tr10415an

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Regulador de Carga Ep-Tr10415an

Uploaded by

Copyright:

Available Formats

Tracer-AN series

MPPT Solar Charge Controller

•CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)

•Support up to 8 units in parallel to expand system

• PV Over Current/power • PV Short Circuit • PV Reverse Polarity

Remote Meter(MT50) Data logger (eLOG01)

Bluetooth adapter WIFI adapter

Nominal System Voltage 12/24VDC or Auto 12/24/36/48VDC or Auto

Battery Input Voltage

Battery Type Sealed/Gel/Flooded/User

(Battery Voltage+2V) (Battery Voltage +2V)

Tracking efficiency ≥99.5%

Nominal System Voltage 12/24/36/48VDC or Auto

Battery Input Voltage

Tracking efficiency ≥99.5%

Conversion efficiency ≤98.7%

Relay Rated Value:5A/30VDC; Max. Value:0.5A/60VDC

RS485 interface RS485(RJ45)

①At minimum operating environment temperature;

Item Tracer5210/5415/5420AN Tracer6210/6415/6420AN

Mounting dimension 180×204mm 260×224mm

Item Tracer8415/8420AN Tracer10415/10420AN

Mounting dimension 300×228mm 300×230mm

BEIJING EPSOLAR TECHNOLOGY CO.,LTD.

You might also like