Special Steels

and Superalloys for Bars

Enhancing your performance

 OUR COMMITMENT:
Know-how Production capacity
Bars, billets, semi-products… Our production capacity is based on a unique
Our business is to design, melt and convert metallurgical ideas integrated system for industrial melting
into reality as high quality steels, superalloys, aluminium alloys and converting.
and titanium alloys.
• Melting shop, with arc furnaces up to 65 tonnes
Our bars are used for advanced technologies as diverse as :
• Ladle refining
aerospace, space transport, power generation, automotive and
motor sport, engineering, transport, marine, etc. • AOD/VOD converters
• VIM furnaces up to 12 tonnes
• ESR furnaces up to 25 tonnes
Research & development • VAR furnaces up to 30 tonnes
• Powder atomisation
Our R & D teams, our technical service department and our
• Hammers from 3500 to 60000 kg.m
laboratories have acquired a degree of technical and industrial
• Horizontal forging machine
experience which is renowned world-wide.
We can propose innovative solutions to your most demanding • Forging presses from 1200 to 4500 tonnes
situations. • Rolling mill for bars from 7 to 200 mm diameter
• Heat treatment furnaces for bars up to 21 m long
• NDT - ultrasonic controls by immersion and contact

Approvals
From design to finished production, our
quality management system is totally
integrated into all areas of the company.
With the support of our sophisticated control
• COFRAC Laboratory certification to EN 17025
equipment we thus guarantee the quality
• Special processes: PRI-NADCAP
of our products. The excellence of
• RCCM/ASME
our know-how is recognized by a large
number of quality organisations.
 SPECIFICATIONS MAIN STANDARDS
CHEMICAL COM
AIR WL AMS NF - EN / NF-EN-ISO / NF-A ASTM
European USA Common
AD GRADES
standard designation
Specification Standard Standard Standard Symbol Numerical Standard Grade Standard C Ni Cr M

STEELS FOR CARBURIZING

FADH(3) 14NiCrMo13-4 - - 16 NCD 13 9160/C 1.6657 - - - - - - 0.16 3.2 1 0.
FDG(1) 20NiCrMo13 - - - - - - - - - - - 0.2 3.2 1 0

FND(3) 15NiMoCr10 - - - - - - - - - - - 0.15 2.5 1 2

THROUGH HARDENING STEELS

819AW 35NiCrMo16 - - E 35 NCD 16 H 9160/C - - - - - - - 0.38 4 1.75 0

36NiCrMo16 NF A35571
819B 36NiCrMo16 - - 35 NCD 16 9160/C - - 36NiCrMo16 1.6773 NF EN 10083-1 - - 0.35 3.8 1.7 0
36NiCrMo16 1.6773 NF EN 10250-3

CNS 35NiCr6 - - 35 NC 6 9160/C - - - - - - - 0.35 1.2 0.85

1.7220 - 34CrMo4 1.7225 NF EN 10083-1

F65(1) 34CrMo4 - - 35 CD 4 9160/C
1.7224 - 34CrMo4 1.7225 NF EN 10250-3
- - 0.35 - 1 0

FDMA(1) 30NiCrMo16 - - 30 NCD 16 9160/C - - - - - - - 0.3 3.5 1.2 0.

GH4 40CrMoV13-9 - - 40 CDV 12 9160/C - - 40CrMoV13-9 1.8523 NF EN 10250-3 - - 0.4 - 3 1

GENERAL ENGINEERING STEELS

UNS : G43400 6415 B23 A540

NC40M(1) 41NiCrMo7-3-2
AISI / SAE : 4340
4340 - - -
6359
41NiCrMo7-3-2 1.6563 NF EN 10269
L23 A320
0.4 1.8 0.8 0.

V300(1) 46SiCrMo6 - 45SiCrMo6 45 SCD 6 9160/C - - 46SiCrMo6 1.8062 NF EN 10089 - - 0.45 - 0.6 0.

MARAGING STEELS

MARVAL18 X2NiCoMo18-8-5 UNS : K92890 Maraging 250 E-Z 2 NKD 18 9160/C 1.6359 6512 - - - 72 A579 0.03 18 - 5

MY19 X2NiCoMo18-9-5 UNS : K93120 - - - 1.6358 - - - - - - <0.01 18 - 4

STEELS FOR NITRIDING

GKH(3) 33CrMoV12-9 UNS : K24340 - 32 CDV 13 9160/C - - - - - - - 0.3 - 3 1

GKP(2) 32CrMoV5 - - - - - - - - - - - 0.3 - 1.4 1

STEELS FOR SPECIAL APPLICATIONS

BED 43CrMo4 - - - - - - 42CD4TS - NF A 35563 - - 0.43 - 1 0

CLARM HBR 30NiCrMoV14 - - - - - - - - - - - 0.3 3.5 1.5 0

CLARM HB3 33NiCrMoV15 - - - - - - - - - - - 0.33 3.5 1.4 0

CLARM HB7 40NiCrMoV15 - - - - - - - - - - - 0.4 3.7 1.6 0

NC310YW 40SiNiCrMo10 - - - - - - - - - - - 0.4 1.75 0.85 0

6417
NC40SW 40NiSiCrMo7 UNS : K44220 300M - - - 6419 - - - 32 A579 0.4 1.8 0.85 0
6257
6490
RA50YW 80MoCrV42-16 UNS : T11350 M50 E 80 DCV 40 9160/C 1.3552
6491
- - - - - 0.83 - 4.15 4.

UNS : G52986
RAD(3) 100Cr6
AISI / SAE : E52100
- 100 C 6 9160/C 1.3504 - 100Cr6 B1 NF EN ISO683-17 E52100 A322 1 - 1.5

SCV(3) 15CrMoV6 - - 15 CDV 6 9160/C 1.7734 - - - - - - 0.15 - 1.25 0

 HEAT
MPOSITION MECHANICAL PROPERTIES
TREATMENT
APPLICATIONS
see
key UTS 0.2%YS A KCU KV
Mo V Others below (N/mm2) (N/mm2) (%) (J/cm2) (J)

.25 - - T+Rv 150 °C 1350 1000 14 100 - Various heavily stressed mechanical parts, safety-critical parts for the aerospace industry.

0.5 - - T+Rv 150 °C 1500 1250 13 90 - Gears exposed to high stresses, various wear-resistant parts exposed to fatigue in service.

T+F+Rv 300 °C 1400 1120 13 - 120

2 - Si : 1.1 Mechanical parts (temperatures above 150°C): gear sets, fuel injection, parts requiring a PVD coating.
Tgaz+F+Rv 300 °C 1350 1030 13 - 110

T+F+Rv 200 °C 1900 1500 10 50 - Aerospace parts exposed to high stresses.

0.5 - -
T+Rv 650 °C 1050 900 18 110 - Various heavily stressed mechanical parts.

T+F+Rv 200 °C 1850 1400 8 40 -

0.3 - - Large mechanical parts of complex shape exposed to high stresses.
T+Rv 650 °C 1000 850 19 130 -
T+Rv 550 °C 1100 950 14.5 85
- - - - Various crankshafts, shafts, fasteners, gears.
T+Rv 650 °C 900 750 18 120
T+Rv 600 °C 1050 950 16.5 100
0.2 - - - Truck, turbine or rotor drive shafts, gearbox gears.
T+Rv 675 °C 900 750 20 140
T+Rv 200 °C 1750 1250 12 70
.45 - - - Parts requiring excellent fatigue and impact resistance.
T+Rv 625 °C 1000 900 19 140
T+Rv 200 °C 1950 1450 10 60
1 0.2 - - Parts for the aerospace industry exposed to high stresses (mechanical strength of the order of 1400 N/mm2).
T+Rv 600 °C 1400 1150 13 65

.25 - - T+Rv 600 °C 1100 950 17 100 - Parts requiring excellent fatigue resistance (shafts, gears, various safety-critical mechanical parts).

T+Rv 450 °C 1600 1400 10 30 -

.25 - Si : 1.6 Springs and torsion bars exposed to heavy workloads.
T+Rv 600 °C 1150 1000 18 60 -

Ti : 0.5 H 1070 870 14 - High strength parts for the aerospace and space industry (structural and defence components, fasteners,
5 - -
Co : 8 H+V 480 °C 1850 1780 9 40
welded assemblies).

Ti : 0.7 H 1070 870 14 - -

4.9 -
Co : 8.75 H+V 480 °C 2050 1980 8.5 - 25 Structural and defence components, centrifuge components.
Al : 0.1

T+Rv 600 °C 1300 1100 15 70 Components (particularly aerospace parts) requiring very good mechanical properties in the core
1 0.2 - -
T+Rv 660 °C 1000 850 20 170 (surface hardness approximately 850 Vickers).

T+Rv 640 °C 1250 1175 15 - 80

1.2 0.3 - Parts which must be highly stable (gears, spindles, crankshafts, precision parts, aerospace parts).
T+Rv 660 °C 1130 1060 16 - 110

0.2 - - T+Rv 675 °C 1000 800 19 95 - Various wear-resistant mechanical parts (ball screws, flattening rolls).
T+Rv 600 °C 1200 1100 15 --40°C: 60 Large caliber gun barrels and accessories (breech rings, breech blocks, muzzle brakes, etc…) Pressure vessels.
0.4 0.18 Mn : 0.2
T+Rv 570 °C 1300 1220 15 --40°C: 40 Mechanical parts in the range of YS 900 to 1200 N/mm2.
T+Rv 615 °C 1325 1200 14 --40°C: 45 Large caliber gun barrels and accessories (breech rings, breech blocks, muzzle brakes, etc…) Pressure vessels.
0.5 0.2 Mn : 0.2
T+Rv 560 °C 1420 1300 11 --40°C: 28 Mechanical parts in the range of YS 1200 to 1300 N/mm2.
T+Rv 560 °C 1480 1350 13 --40°C: 32 Large caliber gun barrels and accessories (breech rings, breech blocks, muzzle brakes, etc…) Pressure vessels.
0.9 0.3 Mn : 0.1
T+Rv 585 °C 1350 1260 14 --40°C: 40 Mechanical parts in the range of YS 1250 to 1400 N/mm2.

Various heavily stressed mechanical parts.

0.4 0.2 Si : 2.7 T+F+2xRv 300 °C 2150 1790 9 - - Carburising possible (torsion bars, gears, transmission shafts).
T+2xRv 300 °C 2050 1700 12 50
0.4 - Si : 1.6 - Shafts, gears, various safety-critical mechanical parts, various heavily stressed aerospace mechanical parts.
T+Rv 600 °C 1450 1300 14 60

.25 1 - T+Rv 550 °C hardness: 60 / 64 HRC Aerospace bearings exposed to high stresses.

T+Rv 130 °C hardness: 800 HV

- - - Ball, roller or needle bearings, bearing races, thrust bearings, cams, rollers, etc...
T+Rv 300 °C hardness: 630 HV
T+Rv 650 °C 1050 850 16 - Welded assemblies requiring high mechanical properties.
0.9 0.25 - -
T+Rv 625 °C 1150 1100 17 130 Complies with the requirements of the aerospace industry.

(1) : also available in the remelted version (W) • (2) : also available in the vacuum primary melted and secondary remelted version (YW) • (3) : (1) + (2)
KEY TO HEAT TREATMENT SYMBOLS
SOLUTION TREATED H ANNEALED R
THERMO-MECHANICAL TREATMENT TM QUENCHED AND TEMPERED T+Rv
SUB-ZERO TREATMENT F SOLUTION TREATED AND AGED H+V
The list of products in the table is not exhaustive, please consult us for other materials.
 SPECIFICATIONS MAIN STANDARDS

AIR WL AMS NF - EN / NF-EN-ISO / NF-A ASTM

AD GRADES European USA Common
standard designation
Specification Standard Standard Standard Symbol Numerical Standard Grade Standard C Ni Cr Mo

MARTENSITIC STAINLESS STEELS

56CW X8CrCoNiMo10-6 - FV535 Z 10 CKD 10 9165 1.4911 - X8CrCoNiMo10-6 1.4911 NF EN 10302 - - 0.1 - 10.5 0.8

56T5 X19CrMoNbVN11-1 - - Z 20 CDNb 11 9165 - - X19CrMoNbVN11-1 1.4913 NF EN 10269 - - 0.2 - 11 0.7

X17CrNi16-2 1.4057 NF EN 10088-1
X17CrNi16-2 1.4057 NF EN 10088-3 431 A276
APX X17CrNi16-2 UNS : S43100 431 Z 15 CN 17-03 9160/C 1.4044 - 431 A479 0.16 2 17
X17CrNi16-2 - NF S 94-090 -
AISI / SAE : 431 X17CrNi16-2 1.4057 NF EN 10272 431 F899
X4CrNiMo16-5-1 1.4418 NF EN 10088-1
APX4(1) X4CrNiMo16-5-1 - - Z 8 CND 17-04 9160/C - - X4CrNiMo16-5-1 1.4418 NF EN 10088-3 - - 0.06 4 16 1
X4CrNiMo16-5-1 1.4418 NF S94-090
X4CrNiMo16-5-1 1.4418 NF EN 10272

X13VD(3) X12CrNiMoV12-3 UNS : S64152 JETHETE M152 Z 12 CNDV 12 9160/C 1.4933 - X12CrNiMoV12-3 1.4938 NF EN 10269 XM32 A565 0.12 2.5 11.5 1.6

XD15NW X40CrMoVN16-2 UNS : S42025 - - - - 5925 X40CrMoVN16-2 1.4123 NF EN 10088-1 - - 0.42 - 16 1.8
XD16N X50CrSiMnVN16-1 - - - - - - - - - - - 0.5 - 16 0.3
X105CrMo17 1.4125 NF EN 10088-1 440C A276
STAINLESS STEELS

UNS : S44004 5630 X105CrMo17 1.4125 NF EN 10088-3 440C A314

XDBD(3) X105CrMo17
AISI / SAE : 440C
440C Z 100 CD 17 9160/C -
5880 X105CrMo17 1.4125 NF S 94-090 440C F899
1 - 17 0.5
X108CrMo17 B52 NF EN ISO 683-17 440C A473
AUSTENITIC STAINLESS STEELS

F139 < 0.03

F138
M25W X2CrNiMo18-14-3 UNS: S31673 - - - - - X2CrNiMo18-14-3 1.4435 - - 14 18 3
M30NW X4CrNiMoN21-9-4 - - - - - - - - ISO 5832-9 - F1586 < 0.06 9 21 2.2

NYB66 X1CrNiMoWN24-22-6 UNS: S31266 - - - - - - - - - - < 0.03 22 24 5.5

FERRITIC STAINLESS STEELS

NY32760 X2CrNiMoCuWN25-7-4 UNS : S32760 - - - - - X2CrNiMoCuWN25-7-4 1.4501 - - - < 0.03 6.5 25 3.5
STAINLESS STEELS WITH STRUCTURAL HARDENING
≤ 0.02
X1CrNiMoAlTi12-9-2 NF EN 10088-1
MARVALX12 X1CrNiMoAlTi12-9-2 - - - - - - X1CrNiMoAlTi12-9 1.4530 NF S 94-090 - - 9 12 2

MARVALX12H X1CrNiMoAlTi12-10-2 - - - - - - X1CrNiMoAlTi12-10-2 1.4596 NF EN 10088-1 - - ≤ 0.02 10 12 2

A705 ≤ 0.05
5629 XM13 A564
MARVAL13X X3CrNiMo13-8-2 UNS : S13800 PH13-8Mo - - 1.4534 5864 X3CrNiMoAl13-8-2 1.4534 NF S 94090 XM13 8.3 12.5 2.1

MLX17 X1CrNiMoALTi12-11-2 - - - - - - - - - - - ≤ 0.02 11 12 2

A564 ≤ 0.07
15-5PH 5659
X15U5W X5CrNiCu15-5 UNS : S15500 XM12 - - 1.4545 5862 - - - XM12 5 15 -

A564 ≤ 0.07
17-4PH 5604 NF EN 10088-1
X17U4(1) X5CrNiCuNb16-4 UNS : S17400
630
- - -
5643
X5CrNiCuNb16-4 1.4542
NF EN 10088-3
630 4 16.5 -

STAINLESS STEELS FOR HIGH TEMPERATURES

NY810 X10NiCrTiAI32-21 UNS : N08810 Incoloy 800H - - - - - - - N08810 B408 0.07 31 20 -
B564
5525 - 5731
9165
XN26TW X6NiCrTiMoVB25-15-2 UNS : S66286 A286 E-Z 6 NCT 25 1.4944 5732 - 5734 X6NiCrTiMoVB25-15-2 1.4980 NF EN 10269 660 A453 0.05 26 15 1.25
9160 / C 5737 - 5726

SPECIFICATIONS MAIN STANDARDS

AIR WL AMS NF - EN / NF-EN-ISO / NF-A ASTM

AD GRADES European USA Common
Standard designation
Specification Standard Standard Standard Symbol Numerical Standard Grade Standard C Ni Cr Mo

NICKEL ALLOYS
NY690 NiCr29Fe UNS : N06690 Inconel 690 - - 2.4642 - - - - N06690 B166
B168 ≤ 0.05 Balance 30 -

NY925 NiCr20FeMo3TiCuAl UNS : N09925 - - - - - - - - - - < 0.030 44 21 3

SUPERALLOYS

≤ 0.05
5599
PER625 NiCr22Mo9Nb UNS : N06625 INCO 625 - - - - -
5666
- N06625 B446 Balance 22 9

PER72 NiCr18Co15TiMoAl - UDIMET 720 - - - - - - - - - 0.04 Balance 18 3

PER718 NiCr19Fe19Nb5Mo3 UNS: N07718 INCO 718 - - - - NiCr19Fe19Nb5Mo3 2.4668 - - - 0.04 Balance 18 3

COBALT ALLOYS

M64BC CoCr28Mo UNS : R31537 - - - - - - - ISO 5832-12 Alloy 1 F1537 ≤ 0.15 ≤1 28 6

HS25 5537
XSH CoCr20W15Ni UNS : R30605
L605 KC 20 WN 9165 2.4964
5759 - - ISO 5832-5 - F90 0.1 10 20 -
 HEAT
CHEMICAL COMPOSITION MECHANICAL PROPERTIES
TREATMENT APPLICATIONS
see
key UTS 0.2%YS A KCU KV
V TI Nb Al AZ CU Others below (N/mm2) (N/mm2) (%) (J/cm2) (J)

Turbine parts, compressor parts and miscellaneous parts requiring

0.3 - 0.5 - - - Co : 6 T+2xRv 615 °C 1100 950 14 - - good creep resistance.
Aerospace parts, fasteners for high temperature environments, gas turbine rotors and
0.18 - 0.4 - - - - T+Rv 675/700 °C 1000 800 12 - - blades, miscellaneous steam turbine parts.

T+Rv 400 °C 1400 1050 13 Aerospace, chemical, oil production and nuclear industries,
- - - - - - - T+Rv 630 °C 1000 750 15 40 - parts exposed to marine corrosion.

+Rv 400 °C 1200 950 16 100 - Nuclear energy, weldable safety-critical parts exposed to marine corrosion
- - - - - - - 1000 750 18 120 - (hydraulic pumps and turbines, shafts, tie rods, fasteners).
T+Rv 580 °C

T+Rv 250 °C 1350 1000 17 110 Various mechanical parts, especially for the aerospace industry and gas
0.3 - - - - - - -
T+Rv 650 °C 1050 700 15 120 and steam turbines.

0.35 - - - 0.2 - - T+F - Rv 180 °C hardness: ≥ 58 HRC Bearings, ball screws, valve seats, guide collars.
Si: 2.00 Bearings, bearing components. Knives. Fasteners. Valve seats.
0.3 - - - 0.1 - Mn: 1.00 T+F+Rv 180°C hardness: 59 HRC

- - - - - - - Bearing parts exposed to corrosive effects or operating at temperatures of up

T+F+Rv 140 °C hardness: 59 HRC to 500 °C.

Manufacturing of orthopaedic implants, hip prosthesis, endomedulary nails, spine

- - - - - - - H 540 210 60 250 - systems, rods and screws.
- - - - 0.4 - Mn : 4 H 860 450 45 - - Surgical implants.
Various mechanical and fabricated components operating in corrosive
environments: sea water, chlorinated media, acid gases (H2S).
- - - - 0.5 - W: 2.00 H > 800 > 420 > 50 - - The grade is specifically used in: offshore oil production industry (ASTM A182
Grade F58), marine industry, paper pulp industry, chemical industry.

- - - - 0.25 0.6 W : 0.6 H > 750 > 550 > 30 - - Parts exposed to corrosion (flanges, valves, pumps, tubes).

- 0.3 - 0.7 H+V 555 °C 1240 1195 12.5 120 Welded parts and assemblies requiring good corrosion resistance and very good
- - - H+V 520 °C 1430 1385 10.5 - 45 mechanical properties.
0.9 H+V 540 °C 1440 1370 10.5 60 Various heavily stressed mechanical parts requiring good corrosion resistance and very
- 0.3 - - - - H+V 510 °C 1570 1490 10.0 - 35 good mechanical properties spacial industry.
H+V 540 °C 1450 1350 11
- - - 1 - - - H+V 565 °C 1280 1180 13 - - Corrosion resistant mechanical parts requiring very good mechanical properties.

0.3 1.5 H+V 535 °C 1590 1500 12 - 45 Various heavily stressed mechanical parts requiring good corrosion resistance and very good
- - - - - H+V 510 °C 1725 1610 11 - 25 mechanical properties (aerospace and defence industries).

- 0.3 - 3 H+V 550 °C 1120 1060 15 130 Mechanical parts requiring very good mechanical properties and a good coefficient
- - - H+V 620 °C 950 750 16 - 160 of friction.

- - 0.35 - 4 - H+V 550 °C 1070 1000 10 120 Mechanical parts requiring very good mechanical properties and an acceptable
- H+V 620 °C 950 750 16 - 140 coefficient of friction.

- 0.4 - 0.3 - - Si : 0.7 H ≥ 450 ≥ 170 ≥ 30 - - Chemical industry, pipes for nuclear boilers.

Gas and steam turbine blades, fasteners for high temperature environments,
0.25 2 - - - - - H+V 720 °C 1000 650 25 80 - parts operating at high temperature stress levels.

HEAT
CHEMICAL COMPOSITION MECHANICAL PROPERTIES
TREATMENT APPLICATIONS
see
key UTS 0.2%YS A
Si TI Co Fe Al Others below
(N/mm2) (N/mm2) (%)

- - - 10 - - H ≥ 585 ≥ 240 ≥ 30 Nuclear industry.

Parts combining a high elastic limit with corrosion resistance or non-magnetic

- 2 - > 22 - Cu : 2 H+V 1150 795 28 properties for the offshore environment.

≤ 0.50 ≤ 0.40 ≤1 ≤5 ≤ 0.4

Mn : 0.5 H - Grade 1 850 450 40 Excellent resistance to oxidation combined with very good mechanical properties
Nb : 3.6 H - Grade 2 750 350 65 at high temperatures. Good low temperature resistance and corrosion resistance.
- 5 15 - 2.5 W : 1.2 H+V 1530 1150 14 Turbojet and gas turbine blades.
Aerospace industry, fasteners or various parts requiring a particularly high elastic limit,
- 0.9 - 18.5 0.5 Nb: 5.20 H+V 1360 1120 18 corrosion resistance or non-magnetic properties, parts operating at between 600 to 700 °C.

TM ≥ 1175 ≥ 850 ≥ 14 Surgical implants.

- - Balance - - - H 1160 650 35

≤ 0.30 ≤ 3.0
Mn : 1.2 Aerospace parts for turbomachines exposed to high temperatures
- Balance - H 1005 460 -
W : 15 (blades, combustion chambers, nozzles, etc). Surgical implants
YOUR SATISFACTION

Service
Our sales network and our technical support service operate and flexible service from our extensive stock of steels and
in close partnership with our customers to provide a prompt alloys stored in a modern premises. Our computerised stock
and efficient service which is tailored to customer needs. control system provides the facility to organise and plan your
Our Distribution Center is EN9120 certified : our highest prio- current and future requirements so that we can provide
rity is customer satisfaction with a view to providing a rapid a regular call-off service for your long term needs.

DIAMETERS (mm) LENGTHS (mm) SURFACE

PRODUCTS (please contact us for TOLERANCES (mm) (please contact us for STRAIGHTNESS
other requirements) other requirements)
FINISH
Ø ≤ 20 +/- 0.25
20< Ø ≤ 40 +/- 1.25 % Ø 2mm/m
Black 40< Ø ≤ 125
Ra ≤ 12.5 µm
+/- (0.1 + 1 % Ø) 3500 à 6000 with < 0.12 %
125 < Ø ≤ 140
round Ø 7.5 to 350 - 0/+ (0.2 + 2 % Ø) of total length
bars 140< Ø ≤ 190 - 0/+ 3
190< Ø ≤ 350 +/- 3 3500 à 8000 3 mm/m
10 < Ø ≤ 20 +/- 0.25
20 < Ø ≤ 40 +/- 1.25 % Ø 2 mm/m
Peeled 40 < Ø ≤ 125
Ra ≤ 6.3 µm
+/- (0.1 + 1 % Ø) 3500 à 6000 with < 0.12 %
round 125 < Ø ≤ 140
Ø 10 to 350 - 0/+ (0.2 + 2 % Ø) of total length
bars 140 < Ø ≤ 190 - 0/+ 3
190 < Ø ≤ 350 +/- 2 3500 à 8000 3 mm/m
14 < Ø ≤ 20 +/- 0.25
Ground 20 < Ø ≤ 40 +/- 1.25 % Ø 2 mm/m
round Ø 14 to 190 40 < Ø ≤ 125 +/- (0.1 + 1 % Ø) 3500 à 6000 with < 0.12 % Ra ≤ 3.2 µm
bars 125 < Ø ≤ 140 -0/+ (0.2 + 2 % Ø) of total length
140 < Ø ≤ 190 *
Thickness ≤ 170
Flats Please contact us
Width ≤ 400
Side ≤ 20 +/- 0.20
Square Sq. 70 20 < C ≤ 40 +/- 1.25 % C 2000 à 6000 3 mm/m Ra ≤ 12.5 µm
bars 40 < C ≤ 70 +/- (0.1 + 1 % C)
Side
Square 50 ≤ C ≤ 105
+/- 3 % C 2000 à 6000 4 mm/m -
billets 115 ≤ C ≤ 220
220 ≤ C ≤ 310 +/- 2
Thickness: 120 to 220
Blooms Length: 140 to 250
- 3/- 5 2000 à 6000 4 mm/m -

* from quality 12 (eg H12) upwards

 The information and the data presented herein are typical or
average values and are not a guarantee of maximum or minimum
values. Applications specifically suggested for material described
herein are made solely for the purpose of illustration to enable
the reader to make his own evaluation and are not intended as
warranties, either express or implied, of fitness for these or other
purposes. Aubert & Duval 's liability shall not extend, under any
circumstances, to the choice of the Product and its consequences.

Realisation : Makheia Affinity. Aubert & Duval 04-2010

Crédit photos : Jean-Philippe Ehrmann - Joël Damase

Contact us:
www.aubertduval.com