TCMT1600, TCMT4600, TCMT4606

www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, AC Input,
Single / Quad Channel, Half Pitch Mini-Flat Package
FEATURES
• Low profile package (half pitch)
• AC isolation test voltage 3750 VRMS
• Low coupling capacitance of typical 0.3 pF
• Low temperature coefficient of CTR
• Wide ambient temperature range
22775 22628-1
C E • Material categorization: for definitions of compliance
9 please see www.vishay.com/doc?99912

APPLICATIONS
• Programmable logic controllers
1 2 8
A C AGENCY APPROVALS
4 PIN
16 PIN
• UL 1577
• cUL
• DIN EN 60747-5-5 (VDA 0884-5)
• BSI
LINKS TO ADDITIONAL RESOURCES
• CQC
3D 3D • FIMKO
Related Design Tools 3D Models Models Footprints
Documents

Schematics EDA / CAD

DESCRIPTION
The low profile miniflat package includes an optocoupler
with AC Input and transistor output. It is available in single
channel (4 pin) TCMT1600 or quad channel (16 pin)
TCMT4600.

ORDERING INFORMATION
SOP-#
T C M T # 6 0 #

7 mm
PART NUMBER

CTR (%)
AGENCY CERTIFIED / PACKAGE
SINGLE CHANNEL QUAD CHANNEL
UL, cUL, FIMKO, BSI, CQC, VDE 80 to 300 80 to 300 100 to 300
SOP-4 TCMT1600 - -
SOP-4 TCMT1600T3 (1) - -
SOP-16 - TCMT4600 TCMT4606
SOP-16 - TCMT4600T0 (1) -
Notes
• Available only on tape and reel
(1) Product is rotated 180° in tape and reel cavity

Rev. 2.8, 17-Apr-2023 1 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Forward current IF ± 60 mA
Forward surge current tp ≤ 10 μs IFSM ± 1.5 A
Power dissipation Pdiss 100 mW
Junction temperature Tj 125 °C
OUTPUT
Collector emitter voltage VCEO 70 V
Emitter collector voltage VECO 7 V
Collector current IC 50 mA
Collector peak current tp/T = 0.5, tp ≤ 10 ms ICM 100 mA
Power dissipation Pdiss 150 mW
Junction temperature Tj 125 °C
COUPLER
AC isolation test voltage (RMS) VISO 3750 VRMS
Total power dissipation Ptot 250 mW
Operating ambient temperature range Tamb -40 to +100 °C
Storage temperature range Tstg -40 to +125 °C
Soldering temperature (1) Tsld 260 °C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
(1) Wave soldering three cycles are allowed. Also refer to “Assembly Instructions” (www.vishay.com/doc?80054)

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = ± 50 mA VF - 1.35 1.6 V
Junction capacitance VR = 0 V, f = 1 MHz Cj - 8 - pF
OUTPUT
Collector emitter voltage IC = 100 μA VCEO 70 - - V
Emitter collector voltage IE = 100 μA VECO 7 - - V
Collector dark current VCE = 20 V, IF = 0 ICEO - - 100 nA
COUPLER
Collector emitter saturation voltage IF = ± 10 mA, IC = 1 mA VCEsat - - 0.3 V
VCE = 5 V, IF = ± 10 mA,
Cut-off frequency fc - 100 - kHz
RL = 100 Ω
Capacitance (input to output) f = 1 MHz CIO - 0.3 - pF
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements

CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
TCMT1600 CTR 80 - 300 %
IC/IF VCE = 5 V, IF = ± 5 mA TCMT4600 CTR 80 - 300 %
TCMT4606 CTR 100 - 300 %

Rev. 2.8, 17-Apr-2023 2 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors

SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
VS = 5 V, IC = 2 mA, RL = 100 Ω
Delay time td - 3 - μs
(see figure 1)
VS = 5 V, IC = 2 mA, RL = 100 Ω
Rise time tr - 3 - μs
(see figure 1)
VS = 5 V, IC = 2 mA, RL = 100 Ω
Fall time tf - 4.7 - μs
(see figure 1)
VS = 5 V, IC = 2 mA, RL = 100 Ω
Storage time ts - 0.3 - μs
(see figure 1)
VS = 5 V, IC = 2 mA, RL = 100 Ω
Turn-on time ton - 6 - μs
(see figure 1)
VS = 5 V, IC = 2 mA, RL = 100 Ω
Turn-off time toff - 5 - μs
(see figure 1)
VS = 5 V, IF = ± 10 mA, RL = 1 kΩ
Turn-on time ton - 9 - μs
(see figure 2)
VS = 5 V, IF = ± 10 mA, RL = 1 kΩ
Turn-off time toff - 18 - μs
(see figure 2)

IF
IF IF +5V
0 0
tp t
IC
IC = 2 mA; Adjusted Through
100 %
Input Amplitude
90 %
RG = 50 Ω
tp
= 0.01
T
tp = 50 µs 10 %
0
tr
Channel I t
td ts tf
Oscilloscope t on t off
Channel II tp Pulse duration ts Storage time
RL = 1 MΩ
50 Ω 100 Ω td Delay time tf Fall time
CL = 20 pF tr Rise time t off (= ts + tf) Turn-off time
15234 t on (= td + tr) Turn-on time 96 11698

Fig. 1 - Test Circuit, Non-Saturated Operation Fig. 3 - Switching Times

IF IF = 10 mA +5V
0

RG = 50 Ω
tp
= 0.01
T
t p = 50 µs

Channel I
Oscilloscope
Channel II
R L = 1 MΩ
50 Ω 1 kΩ
C L = 20 pF
15235

Fig. 2 - Test Circuit, Saturated Operation

Rev. 2.8, 17-Apr-2023 3 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Climatic classification (according to IEC 68 part 1) 55 / 110 / 21
Comparative tracking index CTI 175
Maximum rated withstanding isolation voltage 40 % to 60 % RH, AC test of 1 min VISO 3750 VRMS
Maximum transient isolation voltage VIOTM 6000 V
Maximum repetitive peak isolation voltage VIORM 707 V
Insulation resistance VIO = 500 V, Tamb = 100 °C RIO 1011 Ω
Isolation resistance (under fault conditions) VIO = 500 V, Tamb = TSI RIO 109 Ω
Output safety power PSO 350 mW
Input safety current ISI 200 mA
Input safety temperature TSI 175 °C
VIORM x 1.6 = VPR, type and sample test
Apparent charge test voltage (method A) VPR 1132 Vpeak
tm = 60 s, partial discharge < 5 pC
VIORM x 1.875 = VPR, 100 % production
Apparent charge test voltage (method B) VPR 1326 Vpeak
test with tm = 1 s, partial discharge < 5 pC
Creepage distance ≥5 mm
Clearance distance ≥5 mm
Insulation thickness DTI ≥ 0.4 mm
Environment (pollution degree in accordance to DIN VDE 0109) 2
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

100
Ptot - Total Power Dissipation (mW)

300
Coupled device Tamb = 110 °C
IF - Forward Current (mA)

250 Tamb = 75 °C
Tamb = 25 °C
10 Tamb = 0 °C
200 Tamb = -55 °C
Phototransistor
150
IR-diode
100 1

50

0 0.1
0 40 80 120 0.6 0.8 1.0 1.2 1.4 1.6
9611700-1 Tamb - Ambient Temperature (°C) VF - Forward Voltage (V)

Fig. 4 - Total Power Dissipation vs. Ambient Temperature Fig. 5 - Forward Voltage vs. Forward Current

Rev. 2.8, 17-Apr-2023 4 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors

NCTR - Normalized CTR (non-saturated)

55 1.2
IF = 35 mA
50 IF = 5 mA
IC - Collector Current (mA)

45 1.0
IF = 30 mA
40
35 IF = 25 mA 0.8
30
IF = 20 mA 0.6
25
20 IF = 15 mA
0.4
15
IF = 10 mA
10 IF = 1 mA
0.2
5 Normalized to CTR value:
IF = 5 mA IF = 5 mA, VCE = 5 V, Tamb = 25 °C
0 0
0 1 2 3 4 5 6 7 8 9 10 -60 -40 -20 0 20 40 60 80 100 120
VCE - Collector Emitter Voltage (non-sat) (V)
Tamb - Ambient Temperature (°C)

Fig. 6 - Collector Current vs. Collector Emitter Voltage Fig. 9 - Normalized Current Transfer Ratio (non-saturated) vs.
Ambient Temperature

10 000 1.2
IF = 0 mA IF = 5 mA

NCTR - Normalized CTR (sat)

ICE0 - Leakage Current (nA)

1000 1.0
VCE = 40 V
100
0.8
10
0.6
1 VCE = 24 V
0.4
0.1
VCE = 12 V
0.01 0.2
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
0.001 0
-60 -40 -20 0 20 40 60 80 100 120
-60 -40 -20 0 20 40 60 80 100 120
Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C)

Fig. 7 - Leakage Current vs. Ambient Temperature Fig. 10 - Normalized Current Transfer Ratio (saturated) vs.
Ambient Temperature

14 0.40
VCEsat - Collector Emitter Voltage (V)

IF = 10 mA IF = 10 mA
0.35
IC - Collector Current (mA)

12
0.30
10 Ic = 5 mA
0.25
8 IF = 5 mA
0.20 Ic = 2 mA
6
0.15
4 IF = 1 mA 0.10
IF = 2 mA
2 0.05 Ic = 1 mA

0 0.00
-60 -40 -20 0 20 40 60 80 100 120
0 0.1 0.2 0.3 0.4
VCE - Collector Emitter Voltage (V) Tamb - Ambient Temperature (°C)

Fig. 8 - Collector Current vs. Collector Emitter Voltage Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature

Rev. 2.8, 17-Apr-2023 5 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors

1.4 1000
Tamb = 0 °C VCC = 5 V
NCTR - Normalized CTR (NS)

1.2
Tamb = -55 °C
1.0 Tamb = 25 °C
100

FCTR (kHz)
0.8

0.6
Tamb = 75 °C
10
0.4 Tamb = 100 °C
Normalized to:
0.2 IF = 5 mA, VCE = 5 V,
Tamb = 25 °C
0 1
0.1 1 10 100
0.1 1 10 100
IF - Forward Current (mA) IC (mA)

Fig. 12 - Normalized CTR (non-saturated) vs. Forward Current Fig. 15 - FCTR vs. Collector Current

1.2 1000
VCE = 0.4 V Tamb = 0 °C VCE = 5 V, IC = 2 mA
NCTR - Normalized CTR (sat)

ton, toff Switching Time (μs)

Normalized to: Tamb = -55
- °C
1.0
IF = 5 mA,
100 toff (μs)
VCE = 5 V,
0.8 Tamb = 25 °C

0.6 10

0.4
1 ton (μs)
Tamb = 25 °C
0.2
Tamb = 75 °C
Tamb = 100 °C
0 0.1
0 5 10 15 20
0.1 1 10 100
IF - Forward Current (mA) RL - Load Resistance (kΩ)

Fig. 13 - Normalized CTR (saturated) vs. Forward Current Fig. 16 - Switching Time vs. Load Resistance

0
VCE = 5 V
-20
RL = 100 Ω
-40
Phase Angle (deg)

-60 RL = 1000 Ω

-80

-100

-120

-140

-160
1 10 100 1000

f - Frequency (kHz)

Fig. 14 - FCTR vs. Phase Angle

Rev. 2.8, 17-Apr-2023 6 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters

4 3

4.40 typ.

0.2 ± 0.05
+ 0.20
0.60 - 0.30
Pin One I.D. 7.00 ± 0.30

Lead coplanarity
0.1 max.
1 2
2.00 ± 0.10

2.85 max.
2.60 ± 0.20 Possible footprint

0.9
1.27
0.4 ± 0.1 5.00
0.10 ± 0.10

7.60
1.27 nom.

Rev. 2.8, 17-Apr-2023 7 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
PACKAGE MARKING

MT1600 TCMT4600

V XXXX 68 V XXXX 68

Note
• XXXX = LMC (lot marking code)

PACKAGING INFORMATION (TAPE AND REEL) in millimeters

Top cover tape

Embossed carrier
Embossment
17998

Fig. 17 - Tape and Reel Shipping Medium

2 ± 0.1 4 ± 0.1 1.55 ± 0.05

0.3 ± 0.05 Pin 1 1.75 ± 0.1

7.5 ± 0.1

16 ± 0.3
4.4 7.4 ± 0.1 7.4 ± 0.1

5°
2.2 ± 0.1
8 ± 0.1
2.6 ± 0.1
2.95 ± 0.1 1.6 ± 0.1

Fig. 18 - Tape and Reel Packing (3000 parts per reel)

Rev. 2.8, 17-Apr-2023 8 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors

Ø 1.55
2.6
2 4

1.75
0.3

technical drawings
according to DIN
specification

7.5
16
10.6

5°
7.4 12

Ø 1.6
2.2

Direction of pulling out 18427

Fig. 19 - TTape and Reel Packing for TCMT460X (2000 parts per reel)

2.6
Ø 1.55

4
1.75

2
0.3

technical drawings
according to DIN
specification
7.5
10.6
16

5°
7.4 12
Ø 1.6

2.2

Direction of pulling out

18427_1

Fig. 20 - TTape and Reel Packing for TCMT460XT0 (2000 parts per reel)

SOLDER PROFILES HANDLING AND STORAGE CONDITIONS

Axis Title ESD level: HBM class 2
300 10000
Floor life: unlimited
Max. 260 °C
250 255 °C Conditions: Tamb < 30 °C, RH < 85 %
245 °C
240 °C
217 °C
Moisture sensitivity level 1, according to J-STD-020
Temperature (°C)

200 1000
Max. 30 s
2nd line
2nd line

1st line

150
Max. 120 s Max. 100 s
100 100
Max. ramp down 6 °C/s

50 Max. ramp up 3 °C/s

0 10
0 50 100 150 200 250 300
19841-1 Time (s)

Fig. 21 - Lead (Pb)-free Reflow Solder Profile According to

J-STD-020 for SMD Devices

Rev. 2.8, 17-Apr-2023 9 Document Number: 83512

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 01-Jan-2024 1 Document Number: 91000

For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000