DPP-2 Application of Derivatives: IIT Pace
DPP-2 Application of Derivatives: IIT Pace
DPP-2 Application of Derivatives: IIT Pace
OBJECTIVE TYPE
1. The area of the triangle formed by any tangent say at any point on the curve xy = c2 with the
co-ordinate axes is
(A) c2 (B) 2c (C) 2c2 (D) c3
2. The equation of the normal to the curve x2 = 4y which passes through the point (1, 2) is
(A) 2x + y – 4 = 0 (B) x + y = 3 (C) 2x – y = 0 (D) 2x – y – 4 = 6
3. The perpendicular distance from origin to the normal at any point to the curve
x = a (cos + sin), y = a (sin – cos) is
(A) a (B) a/2 (C) a/3 (D) 2a
4. If p and q are the lengths of the perpendiculars from the origin to tangent and normal to the curve
x = ae (sin – cos), y = ae (sin + cos) then
(A) p = 2q (B) p = q (C) 2p = q (D) p + q = a
5. If p and q are the lengths of the perpendiculars form the origin on the tangent and the normal to the
curve x2/3 + y2/3 = a2/3 then 4p2 + q2 =
(A) a2 (B) a3 (C) 1 (D) a4
x3 x 2 7x 11
7. The angle between the curves y = 2
,y at (2, 1) is
x 1 x 1
(A) /3 (B) /4 (C) /2 (D) /6
11. If the relationship between the subnormal (S.N.) and subtangent (S.T.) at any point on the curve
p
by2 = (x + a)3 is of the form p(S.N.) = q(S.T)2 then
q
8a 27a 8b 27b
(A) (B) (C) (D)
27 8 27 8
12. In the curve xyn = an+1 the length of the subnormal is constant when n =
(A) 1 (B) –1 (C) 2 (D) –2
13. For the curve x2y2 = a5 the length of the subtangent at any point varies as
(A) The abscissa (B) the square of the abscissa
(C) the ordinate (D) product of ordinate and abscissa
15. For the curve y2 = (x + a)3 the square of the sub tangent varies as
(A) x (B) y (C) subnormal (D) xy
16. The normal to the curve x = a (cos + sin ), y = a (sin – cos) at any point is such that
(A) it makes a constant angle with x – axis
(B) it passes through origin
(C) it is at a constant distance from the origin
(D) None
18. The value of parameter a so that the line (3 a) x ay (a 2 1) 0 is normal to the curve
xy = 1, may lie in the interval
(A) ( , 0)(3, ) (B) (1,3) (C) (–3, 3) (D) None of these
1 1 1 1
(C) 0, , (D) 0,
2 2 2 2
x x
20. If f x and g x , where 0 < x 1 then in the interval
sin x tan x
(A) both f(x) and g(x) are increasing functions
(B) both f(x) and g(x) are decreasing functions
(C) f (x) is an increasing function, g(x) is decreasing function
(D) g(x) is an increasing function, f(x) is decreasing function
22. On which of the following intervals is the function f(x) = x100 + sin x – 1 decreasing ?
(A) (0, π/2) (B) (0, 1) (C) , (D) None of these
2
23. Function f(x) = |x| – |x – 1| is monotonically increasing when
(A) x < 0 (B) x > 1 (C) x < 1 (D) 0 < x < 1
24. For what values of a does the curve f (x) = x(a2 – 2a – 2) + cos x is always strictly monotonic
x R
(A) a R (B) a > 0
(C) 1 – 2 < a < 1 + 2 (D) None of these
3 3
(C) increasing ,0 (D) decreasing in 0,
2 2
26. If f : [1, 10] [1, 10] is a non decreasing function and g : [1, 10] [1, 10] is a non increasing
function. Let h (x) = f(g (x)) with h(1) = 1, then h(2)
(A) lies in (1, 2) (B) is more than 2 (C) equal to 1 (D) is less than 1
27. If y = a ln|x| + bx2 + x has extreme values at x = – 4/3 and at x = 2 then a, b are
3 3 4
(A) ,4 (B) 4, (C) 4, (D) None of these
4 4 3
28. The nearest point on the curve y2 = 4x to (2, 1) is
(A) (0, 0) (B) (1, 1) (C) (1, 2) (D) None
30. The co-ordinates of the point on the curve 4x2 + a2y2 = 4a2, 4 < a3 < 8 which is farthest from the
point(0, 2) is
(A) (1, 1) (B) (1, 2) (C) (0, 4) (D) (0, -2)
31. The perimeter of a sector of a circle is constant. The angle of the sector when the area is maximum
is
(A) 1 radian (B) 2 radians (C) 4 radian (D) 5 radian
32. The maximum possible area that can be enclosed by a wire of length 20 cm by bending it into the
form of a sector in (sq. cm.) is
(A) 20 sq. cm (B) 25 sq. cm (C) 30 sq. cm (D) None
33. The height of the cylinder of maximum volume that can be inscribed in a sphere of radius r is
2r r
(A) 2r (B) (C) (D) None
3 2 3
34. A closed cylinder of given volume will have its least surface when its height is equal to
(A) its radius (B) its diameter (C) half its radius (D) None
35. A cylinder is inscribed in a cone of height ‘h’ and semi vertical angle ‘’ when the curved surface
area is maximum, the height of the cylinder is
(A) h/2 (B) h/4 (C) 3h/2 (D) h/8
36. A rectangular sheet of metal with sides a, b has four equal square portions removed at the corners
and the sides are then turned up so as to form an open rectangular box. When the volume contained
in the box is maximum, the depth of the box is
1 1
1 1
a b a ab b 2 a b a ab b 2
2 2 2 2
(A) (B)
6 6
1 1
1 2 2 1 2 2
(C) a b
a 2
ab b (D) a b
a 2
ab b
6 6
38. A company desires to manufacture a large number of open metal boxes having a square bottom and
a fixed volume of 32 c.c. The area of the least metal required is
(A) 36 (B) 48 (C) 52 (D) 64
39. The least area of the triangle formed by a line through (3, 4) and the coordinate axes is
(A) 18 sq. units (B) 24 sq. unit (C) 30 sq. units (D) none
40. LL is the latus rectum of the parabola y2 = 4ax and PP is double ordinate between the vertex and
the latus rectum. The area of the trapezium PP LL is maximum when the distance of PP from the
vertex is
(A) a/3 (B) a/6 (C) a/9 (D) a/12
41. The semivertical angle of a cone of maximum volume and of given slant height is
1 1
(A) sin–1 2 (B) sin–1 (C) tan–1 (D) tan–1 2
3 3
42. A conical tent of given capacity will require the least amount of canvas when the height is
(A) 2 radius (B) 3 radius (C) 3 radius (D) 4 radius
43. The height of the maximum cone that can be obtained by revolving a right angled triangle of hypotenuse
units about a side is
(A) (B) (C) (D) None
3 2 3
44. Assuming that stiffness of a beam of rectangular cross-section varies the breadth and as the cube
of the depth, for the stiffest beam which can be cut out of a circular beam of radius ‘r’, breadth must
be equal to
(A) one third of the diameter of the log (B) one fourth of the diameter of the log
(C) half of the diameter of the log (D) None
45. The strength of a beam varies as the product of its breadth ‘b’ and square of its depth ‘d’. A beam cut
out of a circular log of radius ‘r’ would be stiffest when
r r 2
(A) b d (B) b 2 d (C) d 2b 2 r (D) d 3b 2 3r
2 2 3
46. To run a motor for one hour the petrol varies as the cube of its velocity. If it moves against the stream
flowing at the rate of 6mph. the economical speed is
(A) 9 mph (B) 7 mph (C) 5 mph (D) 2 mph
47. A person in a boat is at a distance “a” from the nearest point A on the shore. He would like to reach
the point B early which is on the same shore at a distance “b” from A. The ratio of his rate of walking
to the rate of boat speed is sec . He should land at a point and walk to B whose distance from B is
b sin a cos a cos b sin b sin a cos a cos b sin
(A) (B) (C) (D)
sin sin cos cos
49. A running track of 440 ft. is to be laid out enclosing a foot ball field, the shape of which is a rectangle
with a semi – circle at each end. If the area of the rectangular portion is maximum, the lengths of the
sides are
(A) 100 ft., 60 ft. (B) 70 ft., 50 ft. (C) 90 ft, 70 ft. (D) 110 ft., 70ft.
50. If P(x) = a0 + a1x2 + a2x4 +……+ anx2n be a polynomial in x R with 0 < a1 < a2 < …..< an
then, P(x) has
(A) exactly one maximum (B) exactly one minimum
(C) one maximum and one minimum (D) none of these
a2 b2
51. The minimum radius vector of the curve is 1 of the length
x2 y2
(A) | a – b | (B) ab (C) a + b (D) none of these
52. A right cylindrical vessel of a given capacity is formed using least possible material. Then the ratio of
the height of the radius of the base is
(A) : 1 (B) :1 (C) 2 : 1 (D) 1 : 1
53. Let f(x) = (x – 1)p (x – 2)q, where p > 1, q > 1. Each critical point of f(x) is a point of extremum
when
(A) p = 3, q = 4 (B) p = 4, q = 2 (C) p = 2, q = 3 (D) p = 2, q = 4
55. N characters of information are held on a magnetic tape in batches of x characters each, the batch
processing time being + x2 seconds where , are constants. The optional value of x for fast
processing is
(A) (B) (C) (D)
56. The minimum value of the function defined by f(x) = max {x, x + 1, 2 – x} is
(A) 0 (B) 1/2 (C) 1 (D) 3/2
1 1
57. The minimum value of 1 1
n
sin cos n
(A) 1 (B) 2 (C) (1 + 2n/2)2 (D) (1 + 2n)2
1 1
58. The maximum value of f (x), if f (x) + f ,x domain of f
x x
(A) –1 (B) 1/2 (C) 1 (D) 2
60. If x1 and x2 are abscissas of two points on the curve f(x) = x – x2 in the interval (0, 1) then maximum
value of the expression x1 – x12 is
(A) 1/4 (B) 1/2 (C) 1 (D) 2
61. Let f(x) = max { x2, 2 – x2}, – 2 x 2, then the function f(x)
(A) has a local maximum at x = 0 (B) has a local maximum at x = ± 1
(C) has global maximum at x = 2 (D) has local as well as global minima at x = ± 1
62. If a, b be real numbers such that x3 – ax2 + bx – 6 = 0 has its roots real and positive then
minimum value of b is
(A) 0 (B) 11 (C) 3(36)1/3 (D) 97
64. If f(x) satisfies LaGrange’s mean value theorem on [a, b] then c (a, b) exists such that
(A) f 1(C) = f(B) – f(A)
(B) f 1(C) = 0
(C) The tangent at x = c to the curve y = f(x) is parallel to the chord joining x = a, x = b
(D) Both theorems are not applicable
65. For the function f(x) = (x – 1) (x – 2) (x – 3) in [0, 4], value of ‘c’ in LaGrange’s theorem is
2 21 1 21
(A) 2 ± (B) 1 (C) (D) 4 – 2
3 6 6
66. If f(x) = x ln x, x 0 and f (0) = 0 satisfies the conditions of Rolle’s theorem on [0, 1],
then can be equal to
(A) – 1 (B) – 2 (C) 0 (D) 1/2
68. If a function f (x) is continuous in the closed interval [2, 4] and differentiable in the open interval
(2, 4) and f(2) = 5, f(4) = 13, if at least one point c in (2, 4) then f (c) =
(A) 2 (B) 3 (C) 4 (D) 6
69. The quadratic equation 3ax 2 + 2bx + c = 0 has at least one root lying between 0 and 1, then
(A) a + b + c = 0 (B) c = 0
(C) 3a + 2b + c = 0 (D) a + b = c
70. The value of ‘a’ for which x 3 – 3x + a = 0 has two distinct roots in [0, 1]
(A) – 1 (B) 1 (C) 3 (D) does not exist
1. C 2. B 3. A 4. B 5. A
6. C 7. B 8. B 9. C 10. A
EXERCISE 2 (B)
1 3 3
1. x 3 x 2 3x 5. 3. 2y + x = ,2 y x 0
2 4 2 2
1
4. x+y=3 6. n 8. x (1, 2) (3, )
2
5
9. x ,
3 3
5 7 5 b b2 1
11. x 0, , , x , 17. =
4 4 4 4 4 4