Bag Filtration Systems FT

Bag Filters
Zakkenfilters
Filtres à poches
Eaton Filtration
BAG FILTRATION SYSTEMS
Filter Housings
TOPLINE .....................................................
SIDELINE ...................................................
FLOWLINE .................................................
ECOLINE.....................................................
MINILINE ………………………………………
Accessories/Baskets …………………………
POLYLINE ……………………………………
MODULINE ...…………………………………
DUOLINE ………………...……………………
MAXILINE ……………………………………
Housing Nomenclature Chart ………………
Filter Bags
HAYFLOW FILTER ELEMENT ..................
ACCUGAF, ACCURATE, PROGAF............
LOFCLEAR .................................................
FDA Filter Bags ..........................................
DURAGAF ...................................................
SENTINEL, Polypropylene & Polyester .....
SNAP RING, Polypropylene .......................
SNAP RING, Polyester................................
SNAP RING, Nylon .....................................
SNAP RING, Nomex and Teflon .................
SNAP RING, Nylon Monofilament ..............
SENTINEL, Nylon Monofilament.................
TIE ON, Nylon Monofilament
Monofilament...............................................
Filter-Technics bvba SENTINEL Polyester Multifilament .............
A. Van Roeyenstraat 28 SNAP RING, Polyester Multifilament .........
B-2070 Zwijndrecht Belgium SNAP RING Teflon Monofilament...............
Bag Adder Codes ….. ………………………
www.filter-technics.be FILTER CARTRIDGES ...............................
[email protected] Bag Nomenclature Chart.............................
Tel +32 3 254 05 67
Fax +32 3 254 04 95
Gsm +32 495 577 636
Tax BE 0448.510.578
Iban BE84 2200 9885 5059
Swift BIC GEBA BE BB
Filter-Technics
B-2070 Zwijndrecht Belgium
Tel +3232540567 Fax +3232540495
[email protected]
www.filter-technics.be
Eaton Filtration
BAG FILTRATION SYSTEMS
TABLE OF CONTENTS
Filter Housings Page

TOPLINE ...................................................................................... 2
SIDELINE .................................................................................... 4
FLOWLINE .................................................................................. 6
ECOLINE...................................................................................... 8
MINILINE ……………………………………………………………. 10
Accessories/Baskets ………………………………………………. 12
POLYLINE …………………………………………………………. 13
MODULINE ...…………………………………………………….... 15
DUOLINE ………………...……………………………………….... 16
MAXILINE ………………………………………………………….... 18
Housing Nomenclature Chart ……………………………………. 50
Filter Bags Page

HAYFLOW FILTER ELEMENT ...................................................25
ACCUGAF, ACCURATE, PROGAF.............................................26
LOFCLEAR ..................................................................................27
FDA Filter Bags ...........................................................................29
DURAGAF ....................................................................................30
SENTINEL, Polypropylene & Polyester ......................................31
SNAP RING, Polypropylene ........................................................32
SNAP RING, Polyester.................................................................35
SNAP RING, Nylon ......................................................................38
SNAP RING, Nomex and Teflon ..................................................39
SNAP RING, Nylon Monofilament ...............................................39
SENTINEL, Nylon Monofilament..................................................40
TIE ON, Nylon Monofilament & SNAP RING Polypropylene
Monofilament ................................................................................42
SENTINEL Polyester Multifilament ..............................................43
SNAP RING, Polyester Multifilament ..........................................44
SNAP RING Teflon Monofilament................................................45
Bag Adder Codes ….. ……………………………………………….46
FILTER CARTRIDGES ................................................................47
Bag Nomenclature Chart..............................................................49
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
TOPLINETM - Side In/Bottom Out

From design to construction TOPLINE is simply the best single bag
vessel for high efficiency filtration. Because of its “over the top” entry
sealing system the vessel can be used even in applications demand-
ing absolute filtration with no worry about by-pass. Standard features
include ASME code UM stamp, investment cast components, open
dome design for low pressure drop, stainless steel perf. basket,
hinged swing bolt cover, Buna-N O-ring seals, 150 psi pressure rating
and adjustable mounting legs (304 legs for 316 SS version, zinc
plated CS for CS version). All TOPLINE vessels come with Eaton’s
extended 5 year warranty.
Description Part Number Size Material Connection

STAINLESS STEEL
TBF-0101-BB10-020A TBF0111SB02F304 01 304 SS 2” FLG
TBF-0102-BB10-020A TBF0112SB02F304 02 304 SS 2” FLG
TBF-0101-AB10-020A TBF0111SB02F 01 316 SS 2” FLG
TBF-0102-AB10-020A TBF0112SB02F 02 316 SS 2” FLG

CARBON STEEL
TBF-0101-CS10-020A F3AVTB0003 01 CS 2” FLG
TBF-0102-CS10-020A F3AVTB0004 02 CS 2” FLG
ELECTROPOLISHED TOPLINE
TBF-0102-AB10-020R-M32B0 TBF0112SB02FTC 02 316 SS 2” TRI CLOVER
OPTIONS TOPLINE
Description
1/4” DP Taps
Electro Polished Internal—External
Tri-Clover Inlet—Outlet
Steam jacket SS full jacket
Steam jacket CS full jacket
Steam jacket SS body only
Steam jacket CS body only
ASME code U stamp
2
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Spare Parts for TOPLINE Units

Description Part Number Size Material
Size 01 bead blasted basket 9/64” perf XDK11DG-304 01 304 SS
Eye Bolt Kit - (set of 4) XTBF11HD-Set Zinc plated CS
Cover SS304 XL0000018-304 304SS
Cover SS316 XL0000018 316 SS
Cover CS XL0000367 CS
Leg Assembly SS XFG11S 304 SS
Leg Assembly CS zinc plated XFG11CZP CS
Buna-N, O-Ring (Cover) XL0000024 Buna-N
Buna-N, O-Ring (Inlet) X811333 Buna-N
VITON®, O-Ring (Cover) XL0000023 VITON
VITON®, O-Ring (Inlet) X813333 VITON
EPDM, O-Ring (Cover) XL0000321 EPDM
EPDM, O-Ring (Inlet) X812333 EPDM
TFE Encap.VITON, O-Ring (Cover) XL0000043 TFE Encap.VITON
TFE Encap.VITON, O-Ring (Inlet) X818333 TFE Encap.VITON
Hinge Bolt for Cover XL0000186 CS Zinc Plated
Hinge Nut for Cover XL0000185 CS Zinc Plated
Eye Lift Kit for Sanitary (Set of 4) XTBF11HDS-Set
3
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SIDELINETM - Side In/Bottom Out

A heavy duty, cost effective vessel for demanding industrial
and commercial applications with very good sealing capa-
bilities. The special swing bolt cover allows 4 different
opening positions, simplifying installation. Standard fea-
tures include ASME code UM stamp, investment cast com-
ponents, evacuation cover, stainless steel perf. baskets, a
choice of 2” or 3” ANSI flange connections, a 150 psi pres-
sure rating and zinc plated legs. All SIDELINE vessels
come with Eaton’s extended 5 year warranty.
STAINLESS STEEL
SBF-010-BB10-020A SBF0111SB02F304 01 304 SS 2” FLG
SBF-0102-BB10-020A-L F3AVSB0005-304 02 304 SS 2” FLG
SBF-0101-AB10-020A SBF0111SB02F 01 316 SS 2” FLG

SBF-0102-AB10-020AL F3AVSB0005 02 316 SS 2” FLG
SIDELINE Options
Description
3” Tri-Clover In-Out Added
1/4” DP Taps
Electro Polished Internal - External
Tri-Clover In—Out (2” only) series 14AM
Steam jacket SS full jacket
Steam jacket CS full jacket
Steam jacket SS body only
Steam jacket CS body only

ASME code U stamp
Uplift SIDELINE side outlet
4
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SIDELINE Spare Parts

Bag Hold Down Ring XAB97SBF11 316 SS
Eye bolt Kit - set XSBF11HD-set Zinc plated CS
304 SS Cover XL0000011-304 304 SS
316 SS Cover XL0000011 316 SS
Leg Assembly XFG11S 304 SS

EPDM, O-Ring (Cover) XL0000321 EPDM
TFE Encap.VITON, O-Ring (Cover) XL0000043 TFE Encap.VITON
5
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
FLOWLINE™ - Side In/Bottom Out

A light weight, fabricated vessel with very good sealing capabilities that meets the demands of most filtra-
tion applications where an ASME code stamp is not required. Features include a four position swing bolt
investment cast cover with a concave design for easy bag change-outs, Buna-N O-rings, stainless steel
perf. basket, zinc plated stainless steel adjustable mounting legs, and a choice of flanged or NPT connec-
tions.
STAINLESS STEEL
FBF-0101-BB10-020A FBF0111SB02F304 01 304 SS 2” FLG
FBF-0101-BB10-020N FBF0111SB02T304 01 304 SS 2” NPT
FBF-0101-BB10-030A F3AVFB01020 01 304 SS 3” FLG
FBF-0102-BB10-020A FBF0112SB02F304 02 304 SS 2” FLG
FBF-0102-BB10-020N FBF0112SB02T304 02 304 SS 2” NPT
FBF-0102-BB10-030A F3AVFB01021304 02 304 SS 3” FLG
FBF-0101-AB10-020A FBF0111SB02F 01 316 SS 2” FLG
FBF-0101-AB10-020N FBF0111SB02T 01 316 SS 2” NPT
FBF-0102-AB10-020A FBF0112SB02F 02 316 SS 2” FLG
FBF-0102-AB10-020N FBF0112SB02T 02 316 SS 2” NPT
FBF-0102-AB10-030A F3AVFB01021 02 316 SS 3” FLG
CARBON STEEL
FBF-0101-CS10-020A F3AVFB0007 01 CS 2” FLG
FBF-0101-CS10-020N F3AVFB0005 01 CS 2” NPT
FBF-0101-CS10-030A F3AV01032 01 CS 3” FLG
FBF-0102-CS10-020N F3AVFB0006 02 CS 2” NPT
FLOWLINETM - In-Line
FLOWLINE-Inline vessels are built for applications where it is more convenient to have the vessel installed
in line with offset connections opposite each other. “In-Line” vessels offer a 2” side inlet, 2” opposite side
outlet , and a 2” bottom drain, and zinc plated stainless steel adjustable mounting legs.
Description Part Number Size Material Conn. Size
STAINLESS STEEL
FBF-0102-BB10-020A-I F3AVFB00300-304 02 304 SS 2” FLG
FBF-0102-BB10-020N-I F3AVFB00102-304 02 304 SS 2” NPT
FBF-0102-BB10-030A-I F3AVFB01033-304 02 304 SS 3” FLG
FBF-0102-AB10-020A-I F3AVFB00300 02 316 SS 2” FLG
FBF-0102-AB10-020N-I F3AVFB00103 02 316 SS 2” NPT
FBF-0102-AB10-030A-I F3AVFB01033 02 316 SS 3” FLG
CARBON STEEL
FBF-0102-CS10-020A-I F3AVFB00303 02 CS 2” FLG
FBF-0102-CS10-020N-I F3AVFB00201 02 CS 2” NPT
FBF-0102-CS10-030A-I F3AVFB01026 02 CS 3” FLG
6
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
FLOWLINETM - Loop
FLOWLINE-Loop vessels are designed for duplex applications as well as loop piping configurations.
They feature a bottom drain and zinc plated stainless steel adjustable mounting legs.
STAINLESS STEEL
FBF-0102-BB10-020A-L F3AVFB00301-304 02 304 SS 2” FLG
FBF-0102-BB10-020N-L F3AVFB00105-304 02 304 SS 2” NPT
FBF-0102-BB10-030A-L F3AVFB01027-304 02 304 SS 3” FLG
FBF-0102-AB10-020A-L F3AVFB00301 02 316 SS 2” FLG
FBF-0102-AB10-020N-L F3AVFB00105 02 316 SS 2” NPT
FBF-0102-AB10-030A-L F3AVFB01027 02 316 SS 3” FLG
CARBON STEEL
FBF-0102-CS10-020A-L F3AVFB00302 02 CS 2” FLG
FBF-0102-CS10-020N-L F3AVFB00209 02 CS 2” NPT
FBF-0102-CS10-030A-L F3AVFB01025 02 CS 3” FLG
FLOWLINETM Options
Description
1/4” DP Taps (2)
Electro Polished Internal - External
Tri-Clover In - Out 1-1/2”, 2” series 14AM
FLOWLINETM Spare Parts
Bag Hold Down Ring XAB110FBF1 316 SS
Eye Bolt Kit - (set of 4) XFBF11HD-set Zinc plated CS
Eye Bolt Kit Stainless (set of 4) XFBF11HDS-set SS
Leg Assembly SS 304 XFG11FL 304 SS
Leg Assembly zinc plated CS XFG11FLCZP CS
*SS support ring for basket w/Buna O-Ring XL0000575 316 SS
*SS support ring for basket w/Viton O-ring XL0000575V SS / VITON
Buna-N, O-Ring (Basket Support) X811441 Buna
VITON®, O-Ring (Basket Support) X813441 VITON
EPDM, O-Ring (Basket Support) X812441 EPDM
304 SS Cover XL0000008-304 304 SS
316 SS Cover XL0000008 316 SS
CS Cover XL0000654 CS
Buna-N, O-Ring (Cover) X811445 Buna-N
VITON®, O-Ring (Cover) X813445 VITON
EPDM, O-Ring (Cover) X812445 EPDM
* Replaces VITON® Gasket (XL0000081)
7
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
ECOLINETM - Side In/Bottom Out

ECOLINE is the perfect choice for cost sensitive applications that require a reliable light weight vessel with
very good sealing capabilities. ECOLINE vessels feature a V-Clamp cover design, stainless steel baskets
and 1 1/2” or 2” NPT piping connections. Legs not standard, see Spare Parts below.
STAINLESS STEEL
EBF-0101-BB07-020N EBF0111SB02T-304 01 304 SS 2” NPT
EBF-0102-BB07-020N EBF0112SB02T-304 02 304 SS 2” NPT
ECOLINETM - In-Line Configuration

ECOLINE In-Line vessels are built for application requiring “In-Line” connections. ECOLINE “In-Line” vessels
offer side inlet other side outlet connections with same size bottom drain.
STAINLESS STEEL
EBF-0102-BB07-020N-I F3AVEB00100-304 02 304 SS 2” NPT
EBF-0102-BB07-015N-I F3AVEB00101-304 02 304 SS 1-1/2“ NPT
ECOLINETM - Loop Configuration

ECOLINE-Loop vessels are designed for Duplex applications as well as loop piping configuration. They feature
same side inlet and outlet connections on the same side with same size bottom drain.
STAINLESS STEEL
EBF-0102-BB07-020N-L F3AVEB00102-304 02 304 SS 2” NPT
EBF-0102-BB07-015N-L F3AVEB00103-304 02 304 SS 1-1/2“ NPT
8
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
ECOLINE Options
Description
1/4” DP Taps (2)
ECOLINE Spare Parts

Size 01 bead blasted basket 9/64” perf XDK11DG-304 01 304 SS 304 SS
Bag Hold Down Ring XAB85EBF11 316 SS
V-Clamp Assembly w/T-Bolt & Handle XVS11
Leg Assembly XFG11FL 304 SS
Leg Assembly CSc zinc plated XFG11FLCZP CS
*SS Basket Support Ring w/Buna-N O-Ring XL0000575 316 SS
Buna-N, O-Ring (Basket Support) X811441 Buna-N
*SS support ring for basket w/Viton O-ring XL0000575V SS / VITON
VITON®, O-Ring (Basket Support) X813441 VITON
EPDM, O-Ring (Basket Support) X812441 EPDM
304 SS Cover XL0000127SA-304 304 SS
316 SS Cover XL0000127SA 316 SS
EPDM, O-Ring (Cover) X812441 EPDM
* Replaces VITON® Gasket (XL0000081)
9
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
MINILINETM - (EBF) Side In/Bottom Out

MINILINE EBF vessels are designed for low flow rates and cost sensitive applications that require a reli-
able, light weight vessel with very good sealing capabilities. MINILINE EBF vessels feature a V-Clamp
cover design, stainless steel baskets and 1 1/2” NPT piping connections.
STAINLESS STEEL
EBF-0103-BB10-010N F3AVEB00006-304 03 304 SS 1” NPT
EBF-0103-BB10-015N EBF0101SB15T304 03 304 SS 1-1/2” NPT
EBF-0104-BB10-015N EBF0102SB15T304 04 304 SS 1-1/2” NPT
MINILINETM - (EBF) In-Line

Identical to the MINILINE EBF above, but with an in-line design, for side in/side out piping arrangements.
STAINLESS STEEL
EBF-0103-BB10-007N-I F3AVEB00112-304 03 304 SS 3/4” NPT
EBF-0103-BB10-010N-I F3AVEB00111-304 03 304 SS 1” NPT
EBF-0103-BB10-015N-I F3AVEB00110-304 03 304 SS 1-1/2” NPT
MINILINETM - (SBF) Side In/Bottom Out

MINILINE SBF vessels are designed for low flow rates and cost sensitive applications that require a reli-
able, light weight vessel with very good sealing capabilities. MINILINE SBF 300 psi vessels feature an
eye-bolt cover design, stainless steel baskets and 1 1/2” NPT piping connections.
STAINLESS STEEL
SBF-0103-BB21-015N SBF0101SD15TKD 03 304 SS 1-1/2” NPT
SBF-0104-BB21-015N SBF0102SD15TKD 04 304 SS 1-1/2” NPT
MINILINETM - (SBF) In-Line

Identical to the MINILINE SBF above, but with an in-line design, for side in, side out piping.
STAINLESS STEEL
SBF-0103-BB21-007N-I F3AVSB00122-304 03 304 SS 3/4” NPT
SBF-0103-BB21-010N-I F3AVSB00121-304 03 304 SS 1” NPT
SBF-0103-BB21-015N-I F3AVSB00120-304 03 304 SS 1-1/2” NPT
SBF-0104-AB21-010N-1 F3AVSB1018-304 04 304 SS 1” NPT
SBF-0104-AB21-0105N-1 F3AVSB1027-304 04 304 SS 1-1/2” NPT
10
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
MINILINE® Options
Description
1/4” DP Taps (2)
Tri-Clover In - Out 1-1/2” series 14AM
MINILINE® (EBF) & (SBF) Spare Parts
Size 03 Basket Bead Blasted XDK01DG-304 03 304 SS
Size 05 Basket Bead Blasted XDK03DG 05 316 SS
Bag Hold Down Ring XAB85SBF01 03 & 04 316 SS
(EBF Only Parts)
EBF - Cover XL0000041SA-304 3104 SS
EBF - Cover XL0000041SA 316 SS
EBF - Buna-N, O-Ring Cover XL0000029 Buna-N
EBF - VITON®, O-Ring Cover XL0000030 VITON
EBF - EPDM, O-Ring Cover XL0000319 EPDM
EBF - V-Clamp Assembly w/T-Bolt & Handle XVS01
(SBF Only Parts)
SBF - Cover XL0000001-304 304 SS
SBF - Cover XL0000001 316 SS
SBF - Buna-N, O-Ring (Cover) X811351 Buna-N
SBF - VITON®, O-Ring (Cover) X813351 VITON
SBF - EPDM, O-Ring (Cover) X812351 EPDM
SBF - TFE Encap.VITON®, O-Ring (Cover) X818351 TFE Encap.VITON
SBF - Eye Bolt Kit (set of 4) XFBF11HD Zinc plated plated CS
11
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Accessories for All Carbon Steel and Stainless Steel filter

01 Displacement Balloon (VK1116) XL0000805 01 316 SS
02 Displacement Balloon (VK1216) XL0000804 02 316 SS
01 Bag Positioner (EBH11) XL0000798 01 316 SS
02 Bag Positioner (EBH12) XL0000797 02 316 SS
02 Bag Positioner (PROGAF/LCR-500 series) XL0000938 02 316 SS
01 Bag Positioner w/Magnetic (9300 Gauss) XL0000800 01 316 SS Encapsulated
02 Bag Positioner w/Magnetic (9300 Gauss) XL0000799 02 316 SS Encapsulated
02 Magnetic (2000 Gauss) with rubber caps XL0001443 02 316 SS Encapsulated
Additional Magnet bar 01 (9300 Gauss) XLN111SS90M 01 316 SS Encapsulated
Additional Magnet bar 02 (9300 Gauss) XLN121SS90M 02 316 SS Encapsulated
Lift Out Tool Diameter Basket (7”) XAH11 316 SS
Lift Out Tool Diameter Basket (4”) XAH01 316 SS
1-1/2” NPT Open System Adapter Heads X809007 Celcon Plastic
2” NPT Open System Adapter Heads X809003 316 SS
01 Open System Basket X809410 01 316 SS
Differential Pressure Gauge Assembly FLTDPAL Aluminum
Differential Pressure Gauge Assembly FLTDPSS Stainless Steel
HAYFLOW basket upgrade
Differential Pressure switch FLTDPSW
Inlet gasket for MTBF-0202 ST52Z10 Buna N
Replacement Baskets for use of housing as a strainer without filter bags

Description Part Number Size Material Mesh/Micron Size
Mesh 20 basket size 01 L0000062-20M 01 316 SS 20 mesh/850 micron
Mesh 100 basket size 01 L0000062-100M 01 316SS 100 mesh/150 micron
Mesh 150 basket size 01 L0000062-150M 01 316 SS 150mesh/100 micron
Mesh 325 basket size 01 L0000062-325M 01 316SS 325 mesh/45 micron
Mesh 150 basket size 02 L0000082-150M 02 316 SS 150 mesh/100micron
12
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
POLYLINE™
All plastic polypropylene construction stands up to the most aggressive chemical applications. Rated at a full 150
psi the POLYLINE has no metal parts to rust, corrode or contaminate the process fluid. This one piece molded
body features an extremely smooth Interior surface with no crevices to trap the process media. Rock solid installa-
tion is assured by the integral, molded mounting flange without the need for extra support legs. The vessel is easily
adapted to either in line or loop piping arrangements. Bag change out is quick and easy with the POLYLINE spin
off cover.
Polypropylene - for bag filtration
PBF-0101-PO10-020A FLT4201F 01 PPL 2” FLG
PBF-0101-PO10-020N FLT4201 01 PPL 2” NPT
PBF-0102-PO10-020A FLT4202F 02 PPL 2” FLG
PBF-0102-PO10-020N FLT4202 02 PPL 2” NPT
PVC - for bag filtration
PBF-0101-PV10-020A FLT1201F 01 PVC 2” FLG
PBF-0101-PV10-020N FLT1201 01 PVC 2” NPT/SKT
PBF-0102-PV10-020A FLT1202F 02 PVC 2” FLG
PBF-0102-PV10-020N FLT1202 02 PVC 2” NPT/SKT
CPVC - for bag filtration
PBF-0101-CP10-020A FLT2201F 01 CPVC 2” FLG
PBF-0101-CP10-020N FLT2201 01 CPVC 2” NPT/SKT
PBF-0102-CP10-020A FLT2202F 02 CPVC 2” FLG
PBF-0102-CP10-020N FLT2202 02 CPVC 2” NPT/SKT

Polypropylene - for cartridge filtration
** 2” NPT Vessel for 20” cart. (Add kit Pg 14) CFLT4203 N/A PPL 2” NPT
** 2” NPT Vessel for 30” cart. (Add kit Pg 14) CFLT4202 N/A PPL 2” NPT
PVDF - for bag filtration

PBF-0102-PF07-020A FLT5202F 02 PVDF 2” FLG
PVDF - for cartridge filtration
** 2” NPT Vessel for 30” cart. (Add kit Pg 14) CFLT5202F 02 PVDF 2” FLG
POLYLINE™ Duplex
For continuous duty or batch process applications. The system flow does not have to be interrupted for filter bag
change out. A quick turn of the operating lever diverts the flow from one vessel to the other so that the filter bag
can be changed. Valve switching assembly is CPVC on all models.
D-PBF-0101-PO10-020A FLT1DUPA 02 PPL 2” FLG
D-PBF-0102-PV10-020A FLT2DUP1 02 PVC 2” FLG
D-PBF-0102-CP10-020A FLT2DUP2 02 CPVC 2” FLG
13
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
POLYLINE™ - Manifold
For applications with high flow rates, 3 or 4 POLYLINE vessels can be manifolded together. The 01 size triplex can handle flow
rates up to 180 gpm while the 02 size can handle 250 gpm. The size 02 quadplex works in applications with up to 300 gpm.
01 POLYLINE Triplex (180 gpm) FLT1TRI3 01 PPL 3” FLG
02 POLYLINE Triplex (300 gpm) FLT2TRI4 02 PPL 4” FLG
02 POLYLINE (400 gpm) FLT2QUAD 02 PPL 4” FLG
Accessories and Spare Parts for POLYLINE

16” PPL Basket w/handle CRXV427A 01 PPL
32” PPL Basket w/handle CRXV425A 02 PPL
PVC Basket FLT12BSK 02 PVC
32” PVDF Basket w/handle CRXV525A 02 PVDF
Bag Hold Down Ring CRXV428 PPL
Bag Hold Down Ring CRXV528 PVDF
PVC Hold Down FLT125_1 PVC
Vessel Cover CRXV422 PPL
PVC Cover BSX1611 PVC
Bleeder Vent Assembly FLXTVENT PPL
VITON®, O-Ring Kit FLXTPAKV VITON
VITON® Cover O-Ring ORX446V70 VITON
EPDM, O-Ring Kit FLXTPAKE EPDM
EPDM, Cover O-ring ORX446E70 EPDM
DP Gauge Assm. (AL) FLTDPAL Aluminum
DP Gauge Assm. (SS) FLTDPSS 316 SS
DP Switch (for use with DP Gauge Assms.) FLTDPSW
2” Ready Flange THD FLXT42FLG PPL
**Cartridge Adapter Kit for 5 Round MFLT20/30 PPL
2” Ball Valve, Drain FLTT2BT
Mounting Pad Spool FLTSTAND
** Cartridge Adapter Kit MFLT30PVDF PVDF
14
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
MODULINETM Bag Filter Vessels

Two, size 02 (double length), filter vessels connected with a flanged “T” assembly that permits
the flow to go through both vessels, simultaneously with a single inlet and outlet confection. “T”
assemblies are the same material of construction as the filter vessels. All MODULINE vessels
come with ANSI flanged 150# connections. The standard flange gasket is Blueguard 3000 and all
hardware is zinc plated carbon steel. For additional connected vessels to accommodate higher

STAINLESS STEEL
TOPLINE F3AVTB0100-304 02 304 SS 2'' Flanged
TOPLINE F3AVTB0100 02 316 SS 2'' Flanged
SIDELINE F3AVSB1008-304 02 304 SS 2'' Flanged
SIDELINE F3AVSB1028-304 02 304 SS 3'' Flanged
SIDELINE F3AVSB1008 02 316 SS 2'' Flanged
SIDELINE F3AVSB1028 02 316 SS 3'' Flanged
FLOWLINE F3AVFB0500-304 02 304 SS 2'' Flanged
FLOWLINE F3AVFB0510-304 02 304 SS 3'' Flanged
FLOWLINE F3AVFB0500 02 316 SS 2'' Flanged
FLOWLINE F3AVFB0510 02 316 SS 3” Flanged
MTBF-0202-AB10-030A F3AVTB1047 02 316 SS 3” Flanged
CARBON STEEL
TOPLINE F3AVTB0101 02 CS 2'' Flanged
FLOWLINE F3AVFB0501 02 CS 2'' Flanged
MTBF-0202-CS10-030A F3AVTB0351 02 CS 3” Flanged
Inlet gasket for MTBF-0202 ST527101
15
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
DUOLINETM Duplex Bag Filter Vessels

For applications where the system flow cannot be shut down for filter bag change out. Either a
butterfly or ball valve assembly is used to divert the flow between the two vessels so the iso-
lated, out of service vessel can be serviced. The flow is never shut down. An internal linkage
assembly is available for MODULINE vessels with butterfly valves that permits operation of the
valves with a single handle. Orientation of the inlet and outlet connections must be specified,
DUOLINE with linkage assembly
Butterfly Valve Assemblies Part Number

Description Size Material Connection Manual Butterfly Valve without Linkage
STAINLESS STEEL CI body, SS disc & stem, Buna N seats/seals
TOPLINE 02 304 SS 2'' Flanged F3AVTB0200-304

SIDELINE 02 304 SS 2'' Flanged F3AVSB1026-304
FLOWLINE 02 304 SS 2'' Flanged F3AVFB00430-304
TOPLINE 02 316 SS 2'' Flanged F3AVTB0200
SIDELINE 02 316 SS 2'' Flanged F3AVSB1026
FLOWLINE 02 316 SS 2'' Flanged F3AVFB00430
CARBON STEEL CI body, DI disc, SS stem, BunaN seats/seals
TOPLINE 02 CS 2'' Flanged
FLOWLINE 02 CS 2'' Flanged F3AVFB00450

FLOWLINE 02 CS 3” Flanged
Butterfly Valve Assemblies Part Number

Description Size Material Connection Manual Butterfly Valve with Linkage
STAINLESS STEEL CI body, SS disc & stem, Buna N seats/seals

SIDELINE 02 304 SS 2'' Flanged
SIDELINE 02 316 SS 2'' Flanged
CARBON STEEL CI body, DI disc, SS stem, Buna N seats/seals
TOPLINE 02 CS 2'' Flanged F3AVTB0322
FLOWLINE 02 CS 2'' Flanged F3AVFB00442

FLOWLINE 02 CS 3” Flanged
16
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Ball Valve Assemblies Part Number

Description Size Material Connection Manual Ball Valve without Linkage
STAINLESS STEEL SS Ball valve with standard trim and handles
CARBON STEEL
TOPLINE 02 CS 2'' Flanged
FLOWLINE 02 CS 2'' Flanged
17
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SE-MAXILINE™ (QIC-LOCK™ Opening Cover with Spring Assist Hinge)

The SE MAXILINE vessel defines the state of the art for multi-bag vessels. The operator’s safety
and ease of bag change out were considered paramount in its design. A low profile design means
the top of the bag is at about waist height for most operators— thus providing a more ergonomic
position for lifting dirty bags out of the vessel. The SE-MAXILINE’S unique quick opening spindle
closure mechanism provides for a 20 second opening— without tools. The integral vent valve
mechanism protects the operator by preventing the opening of the vessel without first venting the
pressure. Finally, the spring assisted hinge makes lifting the lid easy and safe. All vessels are con-
structed of 316 stainless steel, have a bead blasted finish and carry an ASME “U” code stamp. The
SE is pressure rated to150 psi.
Description Part Number No. of Bags Material Connection
STAINLESS STEEL IN-LINE
VMBF-0402-BB10-040A-UT-11SE F3AV0400010-304 04 304 SS 4” FLG
VMBF-0402-AB10-040A-UT-11SE F3AV0400010 04 316 SS 4” FLG
STAINLESS STEEL LOOP
VMBF-0402-BB10-040A-UT-11SE-L F3AV0400010L304 04 304 SS 4” FLG
VMBF-1202-BB10-100A-UT-11SE-L F3AV1200200L304 12 304SS 10” FLG
VMBF-0402-AB10-040A-UT-11SE-L F3AV0400010L 04 316 SS 4” FLG
18
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
HE-MAXILINETM (Swing Bolt Cover with Spring Assist Hinge)

The HE-MAXILINE sets the standard for safety and ease of use in swing-bolt closure filter ves-
sels. Incorporating the same low profile design as our state-of-the-art SE vessels, the HE is built
close to the floor, meaning less strain on the operator when it is time to change filter bags. The
spring assisted hinge makes lifting the lid easy and individual bag hold-downs are provided for
excellent sealing. Features include , electro-polished perforated baskets, a bead blasted finish,
and an ASME “U”code stamp. The HE is available both in 316 Stainless Steel or Carbon Steel
construction and is rated to 150 psi.

STAINLESS STEEL IN-LINE
MBF-0302-BB10-030A-UT-11HE F3AV0300001-304 03 304 SS 3” FLG
MBF-0302-AB10-030A-UT-11HE F3AV0300001 03 316 SS 3” FLG
CARBON STEEL IN-LINE
MBF-0302-CS10-030A-UT-13HE F3AV0300002 03 CS 3” FLG
STAINLESS STEEL LOOP
MBF-0302-BB10-030A-UT-11HE-L F3AV0300001L304 03 304 SS 3” FLG
MBF-0302-AB10-030A-UT-11HE-L F3AV0300001L 03 316 SS 3” FLG
CARBON STEEL LOOP
MBF-0302-CS10-030A-UT-13HE-L F3AV0300002L 03 CS 3” FLG
19
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
MAXILINETM HE Duplex - with butterfly valves, gear operator and linkage

STAINLESS STEEL
DMBF-0302-BB10-030A-UT11HE-VAL-LINK F3AV0300300-B304 03 304 SS 3” FLG
DMBF-0302-AB10-030A-UT11HE-VAL-LINK F3AV0300300-B 03 316 SS 3” FLG
CARBON STEEL
DMBF-0302-CS10-030A-UT13HE-VAL-LINK F3AV0300301-B 03 CS 3” FLG
20
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
HD-MAXILINETM (Swing Bolt Cover with Hand Wheel Davit)

The HD-MAXILINE Multi bag vessels feature a cost effective, handwheel operated, davit
cover. Loosen the swing bolts, turn the davit handwheel and swing the cover aside. Individual
bag hold-downs provide excellent sealing. Features include , electro-polished perforated bas-
kets, an ASME “U” code stamp, and a bead blasted finish. The side entry design with a low
profile, tangential outlet makes bag change-out easy. The HD is available in both 304
Stainless Steel as well as Carbon Steel and available in 3 through 24 bag designs.
STAINLESS STEEL
MBF-0302-BB10-030A-UT-11HD F3AV0300003-304 03 304 SS 3” FLG
MBF-2402-BB10-140A-UT-11HD F3AV2400003-304 24 304SS 14” FLG
CARBON STEEL
MBF-0302-CS10-030A-UT-14HD F3AV0300004 03 CS 3” FLG
*Swing Bolt Cover with Hydraulic Assist Davit available for HD. HD-MAXILINE vessels are built to order.
21
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Options For MAXILINE HD Vessels

Description Part Number Material Connection
4” connection adder on 3 bag vessel SS 4”
4” connection adder on 3 bag vessel CS 4”
6” connection adder on 4 bag vessel SS 6”
6” connection adder on 4 bag vessel CS 6”
Spare o-rings MAXILINE HE and HD Vessels Spare o-rings MAXILINE VMBF QIC LOCK
Model/Elastomer Part Number Model/Elastomer Part Number

VMBF-0402
MBF-0302
Buna-N L0000292
Buna-N 2375035193
EPDM L0000292-EPDM
Buna-N (Food Grade) 2375035193F VITON L0000292-VITON
Teflon Encapsulated
EPDM 2375035191 Not Available
VITON
VITON 2375035192 VMBF-0602 & 0802

Buna-N L0000293
Teflon Encapsulated
VITON EPDM L0000293E
MBF-0402 VITON L0000293V
Teflon Encapsulated
Buna-N 2375035093 Not Available
VITON
EPDM 2375035091
VITON 2375035092
Teflon Encapsulated
2375035005
VITON
MBF-0602
Buna-N 275036593
EPDM 2375036591
VITON 2375036592
Teflon Encapsulated
2375036505
VITON
MBF-0802
Buna-N 2375037193
EPDM 2375037194
VITON 2375037192
Teflon Encapsulated
2375037105
VITON
22
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Accessories and Spare Parts for all MAXILINE Vessels

Description Part Number Material
02 Displacement Balloon (VK1216) XL0000804 316 SS
02 Bag Positioner (EBH12) XL0000797 316 SS
02 Bag Positioner (PROGAF/LCR-A300500 series) XL0000938 316 SS
02 Bag Positioner w/Magnetic (9300 Gauss) XL0000799
Additional Magnet bar (9300 Gauss) XLN121SS90M
Size 02 basket (9/64) XDK12DG-304 304 SS
Size 02 basket (9/64) XDK12DG 316 SS
Bayonet bag hold down ring 3-point XL0000584 316 SS
Hex nuts (each), Zinc plated steel, set of 6 SA.193 GR.B7
Swing eye bolts (each), Zinc plated steel set of 6 SA.193 GR.B7
Bayonet bag hold down ring 2-point (L0000308) XABMBF 316 SS
23
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
EATON PRECISION FILTER MEDIA

Product Page
HAYFLOW Long-Life Filter Element ......................................... 25
High Efficiency Filter-Bags

ACCUGAF...................................................................................... 26
ACCURATE .................................................................................. 26
PROGAF ....................................................................................... 26
LOFCLEAR 100 ............................................................................. 27
LOFCLEAR 500 ............................................................................. 27
LOFCLEAR Oil Removal ............................................................... 27
Food-Grade Filter-Bags
SENTINEL FDA ............................................................................. 29
DURAGAF FDA ............................................................................. 29
SENTINEL Welded Needlefelt Filter-Bags

DURAGAF PEXL/POXL ................................................................ 30
SENTINEL PE/PO ........................................................................ 31
SNAP-RING Sewn Needlefelt Filter-Bags

PO-Polypropylene ......................................................................... 32-34
PE-Polyester ................................................................................. 35-37
N-Nylon ......................................................................................... 38
PT-PTFE ........................................................................................ 39
HT-Nomex ..................................................................................... 39
SENTINEL/SNAP RING Mesh Filter-Bags

NMO-Nylon .................................................................................... 40-42
PMO-Polypropylene ...................................................................... 42
PEMU-Polyester ............................................................................ 43-44
PTMO-PTFE .................................................................................. 45
LOFCLEAN Filter Cartridges ...................................................... 47-48
REFERENCE MATERIAL
Filter Bag Adders ........................................................................... 46
Bag Nomenclature Chart ............................................................... 49
Housing Nomenclature Chart ................................................... 50
24
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
HAYFLOW™ A Revolutionary New Filter Element from Eaton

Features:
• 70% Greater Surface Area Than Similar Sized Filter Bag
• Liquid Losses are 25% of Similar Sized Filter Bag
• Up to 35 Times More Efficient than Filter Cartridges
• Up to Five Times Greater Life over Filter bags
• Rugged, Heavy Duty, Welded Construction
• SENTINEL ring seal for by-pass free filtration
• Higher Flow Rates - Smaller Vessels Can Be Used
With this new, patent pending filter element, Eaton technology has combined the best of both bag and
cartridge filters into one single filtration element for outstanding filtration performance. Because the surface area of a HAYFLOW
Filter Element is up to 70% greater than a similar size filter bag, existing systems that use it will experience longer filter element
life and less changing, resulting in reduced operation costs. With HAYFLOW, designers of new bag filtration systems can opt for
reduced operating costs or, because of the high flow rates possible with HAYFLOW, reduce the size of the filter vessel by up to
50% and lower the initial cost of the system. Standard, double length, 02 size filter vessels can be easily retrofitted to use the
HAYFLOW Element with the installation of a special restrainer basket. No tools or modifications to the vessel are required.
Box qty: 8
TM
HAYFLOW Polypropylene Extended Life Felt with Polypropylene SENTINEL Ring
Description Part Number Delivery Code Micron Rating Size
POXL-1-P02HAY-8 F5873339 A 1 02
POXL-5-P02HAY-8 F5873349 A 5 02
POXL-10-P02HAY-8 F5873359 A 10 02
POXL-25-P02HAY-8 F5873369 A 25 02
POXL-50-P02HAY-8 F5873379 A 50 02
POXL-100-P02HAY-8 F5873389 A 100 02
HAYFLOWTM Polyester Extended Life Felt with Polypropylene SENTINEL Ring

PEXL-1-P02HAY-8 F5873399 A 1 02
PEXL-5-P02HAY-8 F5873409 A 5 02
PEXL-10-P02HAY-8 F5873419 A 10 02
PEXL-25-P02HAY-8 F5873429 A 25 02
PEXL-50-P02HAY-8 F5873349 A 50 02
PEXL-100-P02HAY-8 F5873449 A 100 02
HAYFLOWTM Accessories
Description Part Number
Restrainer Basket, Stainless Steel F671224A
HAYFLOW Basket AMRB L0001229AMRB
HAYFLOW Basket Rosedale L0001229-ROSEDL
25
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
ACCUGAF® Polypropylene/Polyester Meltblown with Polypropylene SENTINEL® Ring

Heavy duty, welded construction with a patented SENTINEL ring for a by-pass free seal. Polypropylene is made
from FDA compliant materials. Box qty = 10 / 15
Description Part Number Delivery Code Micron Rating @ 99% Size
AGF-51-E01E-O-10 F5869109 A 1.5 01
AGF-53-E01E-O-10 F5869129 A 3 01
AGF-55-E01E-O-10 F5869149 A 5 01
AGF-57-E01E-O-10 F5869169 A 10 01
AGF-59-E01E-O-10 F5869189 A 25 01
AGF-51-E02E-O-15 F5869119 A 1.5 02
AGF-53-E02E-O-10 F5869139 A 3 02
AGF-55-E02E-O-10 F5869159 A 5 02
AGF-57-E02E-O-10 F5869179 A 10 02
AGF-59-E02E-O-10 F5869199 A 25 02
AGFE-51-R01H-O-10* F5870049 A 1.5 01
AGFE-55-R01H-O-10* F5870059 A 5 01
AGFE-57-R01H-O-10* F5870069 A 10 01
AGFE-51-R02H-O-15* F5870079 A 1.5 02
AGFE-55-R02H-O-10* F5870089 A 5 02
AGFE-57-R02H-O-10* F5870099 A 10 02
*Not FDA compliant
ACCURATE® Polypropylene Meltblown with Polypropylene SENTINEL® Ring

Similar to ACCUGAF but in sizes for smaller vessels and with a spun-bound outer protective cover. The SENTINEL
ring insures a by-pass free seal. Heavy duty welded construction.
Box qty = 10
ABP-1-T03E-10 F5843589 D 1 03
ABP-5-T03E-10 F5843609 D 5 03
ABP-10-T03E-10 F5843619 A 10 03
ABP-25-T03E-10 F5843629 D 25 03
ABP-50-T03E-10 F5843639 D 50 03
ABP-1-T04E-10 F5843649 D 1 04
ABP-5-T04E-10 F5843669 D 5 04
ABP-10-T04E-10 F5843679 A 10 04
ABP-25-T04E-10 F5843689 A 25 04
ABP-50-T04E-10 F5843699 D 50 04
PROGAF® Polypropylene Meltblown with Polypropylene SENTINEL® Ring

High efficiency filter bags with absolute micron ratings and high dirt holding capacity. The SENTINEL ring insures a
by-pass free seal. Made from FDA compliant materials. Heavy duty welded construction. Box qty = 4
Description Part Number Delivery Code Micron Rating @99% Size
PGF-50-E02E-O-04 F5865399 A 0.45 02
PGF-51-E02E-O-04 F5869219 A 0.5 02
PGF-55-E02E-O-04 F5869229 A 10 02
PGF-57-E02E-O-04 F5869239 A 20 02
26
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
LOFCLEARTM 100 series Polypropylene Meltblown with SENTINEL® Ring

Cost effective filter bags for absolute filtration applications. Excellent oil absorbency makes them
ideally suited to the oil removal needs of the paint and coating industry. They feature a multi-layer
construction for high efficiencies. Construction materials are compliant with food application re-
quirements. Box qty = 25/40

LCR-113-T01E-40 F5869879 D 4 01
LCR-114-T01E-40 F5869889 D 5 01
LCR-115-T01E-40 F5869899 D 10 01
LCR-116-T01E-40 F5869909 D 15 01
LCR-123-T02E-25 F5869939 A 4 02
LCR-124-T02E-25 F5869949 A 5 02
LCR-125-T02E-25 F5869959 A 10 02
LCR-126-T02E-25 F5869969 A 15 02
LOFCLEAR™ 500 series Polypropylene Meltblown with SENTINEL® Ring

Constructed with a patented, all welded multi-pleated design for high efficiency and long life. The
combination of a pleated pre-filtration layer and a complex design of final filtration layers removes
difficult to filter gels and deformable particles while still providing high dirt holding capacity. A outer
mesh covering eliminates downstream fiber migration. Series 500 filter bags have filtration efficien-
cies from 95% to 99% with dirt holding capacities of over 2 pounds. Box qty = 4
LCR-522-T02Z-04 F5870009 A 2.6 02
LCR-525-T02Z-04 F5870019 A 6 02
LCR-527-T02Z-04 F5870029 A 13 02
LCR-529-T02Z-04 F5870039 A 32 02
LOFCLEAR™ Oil Removal Polypropylene Meltblown with SENTINEL® Ring

The following LOFCLEAR bags were developed for the filtration of coatings in the automotive industry. These bags
securely remove silicone oil and other crater causing substances traces from coatings while allowing pigments to
pass through.
LCR-118/128 are designed for e-coat applications at flow-rates no higher than 45 gpm/size 01 and 90 gpm/size 02.
LCR-119/129 are designed for e-coat applications with higher flow rates up to 60 gpm/size 01 and 120 gpm/size 02.
LCR-130 extended life bags are designed for extra adsorption capacity and high amounts of oil at 90 gpm/size 02.
LCR-135 bags deliver high removal of particulate and oils from clear coat where pigment removal is not an issue,
flow-rate 30 gpm/size 02.
Box qty = 15/20/25/30/40
LCR-118-T01E-40 F5869919 D 30 01
LCR-119-T01E-40 F5869929 D 50 01
LCR-130-T01E-25 F5870619 D 20 01
LCR-135-T01E-30 F5870599 D 10 01
LCR-128-T02E-30 F5869979 A 30 02
LCR-129-T02E-20 F5869989 A 50 02
LCR-130-T02E-15 F5869999 A 20 02
LCR-135-T02E-20 F5866229 A 10 02
27
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Oil Absorption Insert

The Eaton Absorption Insert is the ultimate solution for increased oil removal capacity, made of meltblown polypro-
pylene with a spun bound cover and a polypropylene extruded core for support. The insert can be installed in most
standard size 02 filter bags with SNAP-RING and SENTINEL ring collars. This insert increases dirt and oil removal
capacity. It will not fit into PGF, LCR-500 or LCR-130. It is necessary to equip these inserts with a stainless steel
cover plate for optimal efficiency and capacity. For an easier fit and removal of the insert, the use of an Eaton
straight-sided perforated plate basket (without the indent) is highly recommended.
Nomenclature Part Number Delivery Code Micron Rating Size

Absorption Insert F5873279 A NA 02-04X
Charging Ring F671239 A NA
28
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SENTINEL® FDA Polypropylene Meltblown with Polypropylene SENTINEL® Ring

Heavy duty, welded construction with patented SENTINEL ring for a by-pass free seal. Made from
FDA compliant materials for food applications. Nominal micron ratings. Box qty = 50

POF-1-P01E-WW-50 F3Y00155 B 1 01
POF-1-P02E-WW-50 F31S36935 B 1 02
DURAGAF® FDA Polypropylene felt with Polypropylene SENTINEL® Ring

Designed to provide especially high dirt holding capacity along with long service life. Ideal for filtra-
tion of gel like particles. Heavy duty welded construction. Made from FDA compliant materials.
Nominal micron ratings. Box qty = 30

POXLF-1-P01E-WW-30 F3AB00374 B 1 01
POXLF-5-P01E-WW-30 F3AB00348 B 5 01
POXLF-10-P01E-WW-30 F3AB00375 B 10 01
POXLF-25-P01E-WW-30 F3AB00969 D 25 01
POXLF-1-P02E-WW-30 F3AB00551 A 1 02
POXLF-5-P02E-WW-30 F3AB00349 A 5 02
POXLF-10-P02E-WW-30 F3AB00552 A 10 02
POXLF-25-P02E-WW-30 F3AB00707 B 25 02
DURAGAF® FDA Polyester felt with Polyester SENTINEL® Ring

Designed to provide especially high dirt holding capacity along with long service life. Ideal for filtra-
tion of gel like particles. Heavy duty welded construction. Made from FDA compliant materials.
Nominal micron ratings. Box qty = 30
PEXLF-1-P01H-WW-30 F31S37259 B 1 01
PEXLF-1-P02H-WW-30 F31S37081 A 1 02
29
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
® ®
DURAGAF Polypropylene Felt with Polypropylene SENTINEL Ring
Heavy duty welded construction with the SENTINEL ring for a by-pass free seal. Ideal for filtration of gel like
particles. Especially high dirt holding capacity for long service life. Nominal micron ratings. Box qty = 30

POXL-1-P01E-WW-30 F31R37515 C 1 01
POXL-5-P01E-WW-30 F31R36452 C 5 01
POXL-10-P01E-WW-30 F31R37107 C 10 01
POXL-25-P01E-WW-30 F31R36630 C 25 01
POXL-50-P01E-WW-30 F31R37110 C 50 01
POXL-100-P01E-WW-30 F31R36913 C 100 01
POXL-1-P02E-WW-30 F31S36453 A 1 02
POXL-5-P02E-WW-30 F31S36536 A 5 02
POXL-10-P02E-WW-30 F31S36624 A 10 02
POXL-25-P02E-WW-30 F31S36631 A 25 02
POXL-50-P02E-WW-30 F31S36632 A 50 02
POXL-100-P02E-WW-30 F31S36842 A 100 02
® ®
DURAGAF Polyester Felt with Polypropylene SENTINEL Ring
particles. Box qty = 30

PEXL-1-P01E-WW-30 F31R36999 C 1 01
PEXL-5-P01E-WW-30 F31R36996 C 5 01
PEXL-10-P01E-WW-30 F31R36997 C 10 01
PEXL-25-P01E-WW-30 F31R36994 C 25 01
PEXL-50-P01E-WW-30 F31R36995 C 50 01
PEXL-100-P01E-WW-30 F3Y00149 C 100 01
PEXL-1-P02E-WW-30 F31S36992 A 1 02
PEXL-5-P02E-WW-30 F31S36993 A 5 02
PEXL-10-P02E-WW-30 F31S36990 A 10 02
PEXL-25-P02E-WW-30 F31S36957 A 25 02
PEXL-50-P02E-WW-30 F31S36988 A 50 02
PEXL-100-P02E-WW-30 F31S37849 A 100 02
DURAGAF® Polyester Felt with Polyester SENTINEL® Ring

particles. Especially high dirt holding capacity for long service life. Nominal micron ratings. Box qty = 30
PEXL-1-P01H-WW-30 F31R37580 C 1 01
PEXL-5-P01H-WW-30 F31R36989 C 5 01
PEXL-10-P01H-WW-30 F31R36986 C 10 01
PEXL-25-P01H-WW-30 F31A37530 C 25 01
PEXL-50-P01H-WW-30 F31R36984 C 50 01
PEXL-100-P01H-WW-30 F31R37880 C 100 01
PEXL-1-P02H-WW-30 F31S36985 A 1 02
PEXL-5-P02H-WW-30 F31S36866 A 5 02
PEXL-10-P02H-WW-30 F31S36982 A 10 02
PEXL-25-P02H-WW-30 F31S36983 A 25 02
PEXL-50-P02H-WW-30 F31S36980 A 50 02
PEXL-100-P02H-WW-30 F31S37685 A 100 02
30
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
® ®
SENTINEL Polypropylene Felt with Polypropylene SENTINEL Ring
Heavy duty, welded construction with patented SENTINEL ring for a by-pass free seal. The SENTINEL ring
features integral handles to make bag change out quick and easy. Nominal micron ratings. Box qty = 50 / 30
PO-1-P01E-WW-50 F31R36590 A 1 01
PO-5-P01E-WW-50 F31R36817 A 5 01
PO-10-P01E-WW-50 F31R36552 A 10 01
PO-25-P01E-WW-50 F31R36596 A 25 01
PO-50-P01E-WW-50 F31R36589 A 50 01
PO-100-P01E-WW-50 F31R36551 A 100 01
PO-200-P01E-WW-50 F3AB00319 A 200 01
PO-1-P02E-WW-30 F31S36502 A 1 02
PO-5-P02E-WW-30 F31S36501 A 5 02
PO-10-P02E-WW-30 F31S36503 A 10 02
PO-25-P02E-WW-30 F31S36412 A 25 02
PO-50-P02E-WW-30 F31S36500 A 50 02
PO-100-P02E-WW-30 F31S36505 A 100 02
PO-200-P02E-WW-30 F3AB00222 A 200 02
® ®
SENTINEL Polyester Felt with Polyester SENTINEL Ring
Heavy duty, welded construction with patented SENTINEL ring for a by-pass free seal. The SENTINEL
ring features integral handles to make bag change out quick and easy. Nominal micron ratings. Box qty = 50 / 30
PE-1-P01H-WW-50 F3AB00168 A 1 01
PE-5-P01H-WW-50 F3AB00332 A 5 01
PE-10-P01H-WW-50 F31R37891 A 10 01
PE-25-P01H-WW-50 F3AB00001 A 25 01
PE-50-P01H-WW-50 F31R36763 A 50 01
PE-75-P01H-WW-50 F3AB00555 A 75 01
PE-100-P01H-WW-50 F3AB00556 A 100 01
PE-200-P01H-WW-50 F3AB00557 A 200 01
PE-1-P02H-WW-30 F31S36667 A 1 02
PE-5-P02H-WW-30 F31S36854 A 5 02
PE-10-P02H-WW-30 F31S36912 A 10 02
PE-25-P02H-WW-30 F31S36902 A 25 02
PE-50-P02H-WW-30 F31S37092 A 50 02
PE-75-P02H-WW-30 F3AB00547 A 75 02
PE-100-P02H-WW-30 F31S36970 A 100 02
PE-200-P02H-WW-30 F3AB00554 A 200 02
® ®
SENTINEL Polyester Felt with Polypropylene SENTINEL Ring
Heavy duty, welded construction with patented SENTINEL ring for a by-pass free seal. The SENTINEL
ring features integral handles to make bag change out quick and easy. Nominal micron ratings. Box qty = 50 / 30

PE-1-P01E-WW-50 F31R36707 A 1 01
PE-5-P01E-WW-50 F31R36704 A 5 01
PE-10-P01E-WW-50 F31R37115 A 10 01
PE-25-P01E-WW-50 F31R36455 A 25 01
PE-50-P01E-WW-50 F31R36534 A 50 01
PE-75-P01E-WW-50 F31R36850 A 75 01
PE-100-P01E-WW-50 F31R37122 A 100 01
PE-200-P01E-WW-50 F31R36570 A 200 01
PE-1-P02E-WW-30 F31S36530 A 1 02
PE-5-P02E-WW-30 F31S36418 A 5 02
PE-10-P02E-WW-30 F31S36420 A 10 02
PE-25-P02E-WW-30 F31S36446 A 25 02
PE-50-P02E-WW-30 F31S36445 A 50 02
PE-75-P02E-WW-30 F31S36515 A 75 02
PE-100-P02E-WW-30 F31S36447 A 100 02
PE-200-P02E-WW-30 F31S36526 A 200 02
31
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Polypropylene Felt with Carbon Steel Snap Ring®

SNAP-RING filter bags feature heavy duty sewn construction and are easy to install with a
positive seal. Nominal micron ratings. Box qty = 50 / 30
PO-1-P01S-H-50 F31A36424 A 1 01
PO-5-P01S-H-50 F31A36480 A 5 01
PO-10-P01S-H-50 F31A36719 A 10 01
PO-25-P01S-H-50 F31A36755 A 25 01
PO-50-P01S-H-50 F31A36628 A 50 01
PO-100-P01S-H-50 F31A3652C A 100 01
PO-200-P01S-H-50 F3AB00184 A 200 01
PO-1-P02S-H-30 F31B36392 A 1 02
PO-5-P02S-H-50 F31B36461 A 5 02
PO-10-P02S-H-50 F31B36504 A 10 02
PO-25-P02S-H-50 F31B36373 A 25 02
PO-50-P02S-H-50 F31B31172 A 50 02
PO-100-P02S-H-50 F31B36618 A 100 02
PO-200-P02S-H-30 F3AB00051 A 200 02
PO-1-P03S-50 F3AA00734 B 1 03
PO-5-P03S-50 F3AB00606 B 5 03
PO-10-P03S-50 F3AB00357 B 10 03
PO-25-P03S-50 F3AB00412 B 25 03
PO-50-P03S-50 F3AB00618 B 50 03
PO-100-P03S-50 F3AB00573 B 100 03
PO-200-P03S-50 F3AB01014 C 200 03
PO-1-P04S-50 F3AA00767 B 1 04
PO-5-P04S-50 F3AB00318 B 5 04
PO-10-P04S-50 F3AB00576 B 10 04
PO-25-P04S-50 F3AB00566 B 25 04
PO-50-P04S-50 F3AB00275 B 50 04
PO-100-P04S-50 F3AB00235 B 100 04
PO-200-P04S-50 F3AB00996 B 200 04
32
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Polypropylene Felt with Stainless Steel Snap Ring®

SNAP-RING filter bags feature heavy duty sewn construction and are easy to install with
a positive seal. Nominal micron ratings. Box qty = 30 / 50
PO-1-P01A-H-50 F31A37612 B 1 01
PO-5-P01A-H-50 F31A37938 B 5 01
PO-10-P01A-H-50 F3AB00234 B 10 01
PO-25-P01A-H-50 F31A36771 B 25 01
PO-50-P01A-H-50 F3AB00685 B 50 01
PO-100-P01A-H-50 F31A37316 B 100 01
PO-200-P01A-H-50 D 200 01
PO-1-P02A-H-30 F31B36637 A 1 02
PO-5-P02A-H-50 F31B36523 A 5 02
PO-10-P02A-H-50 F31B36837 A 10 02
PO-25-P02A-H-50 F3AA02055 A 25 02
PO-50-P02A-H-50 F31B36715 A 50 02
PO-100-P02A-H-50 F31B36717 A 100 02
PO-200-P02A-H-30 F3AB00581 A 200 02
PO-1-P03A-50 F3AB00803 C 1 03
PO-5-P03A-50 F3AB00607 C 5 03
PO-10-P03A-50 D 10 03
PO-25-P03A-50 F3AB00145 C 25 03
PO-50-P03A-50 F3AB00727 C 50 03
PO-100-P03A-50 F3AB00728 C 100 03
PO-200-P03A-50 D 200 03
PO-1-P04A-50 F3AB00757 C 1 04
PO-5-P04A-50 F3AB00981 C 5 04
PO-10-P04A-50 F3AB01009 D 10 04
PO-25-P04A-50 F3AB00780 C 25 04
PO-50-P04A-50 F3AB00847 C 50 04
PO-100-P04A-50 F3AB00111 C 100 04
PO-200-P04A-50 D 200 04
33
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Polypropylene Felt with Polypropylene Snap Ring®

PO-1-P01O-H-50 F3AB00013 B 1 01
PO-5-P01O-H-50 F3AB00157 B 5 01
PO-10-P01O-H-50 F3AB00019 B 10 01
PO-25-P01O-H-50 F3AB00020 B 25 01
PO-50-P01O-H-50 F3AB00014 B 50 01
PO-100-P01O-H-50 F31A37288 B 100 01
PO-200-P01O-H-50 F3AB00103 B 200 01
PO-1-P02O-H-30 F31B36372 B 1 02
PO-5-P02O-H-50 F31B37455 B 5 02
PO-10-P02O-H-50 F3AA01434 B 10 02
PO-25-P02O-H-50 F3AB00002 B 25 02
PO-50-P02O-H-50 F3AA00160 B 50 02
PO-100-P02O-H-50 F3AA01128 B 100 02
PO-200-P02O-H-30 F3AB00057 B 200 02
PO-1-P03O-50 F3AB00270 C 1 03
PO-5-P03O-50 F3AB00230 C 5 03
PO-10-P03O-50 F3AB00336 C 10 03
PO-25-P03O-50 F3AB00165 C 25 03
PO-50-P03O-50 F3AB00193 C 50 03
PO-100-P03O-50 F3AB00231 C 100 03
PO-200-P03O-50 F3AB00764 C 200 03
PO-1-P04O-50 F3AB00192 C 1 04
PO-5-P04O-50 F3AB00290 C 5 04
PO-10-P04O-50 F3AB00198 C 10 04
PO-25-P04O-50 F3AB00185 C 25 04
PO-50-P04O-50 F3AB00293 C 50 04
PO-100-P04O-50 F3AB00271 C 100 04
PO-200-P04O-50 D 200 04
34
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Polyester Felt with Carbon Steel Snap Ring®

SNAP-RING filter bags feature heavy duty sewn construction and are easy to install
with a positive seal. Nominal micron ratings. Box qty = 50 / 30
PE-1-P01S-H-50 F31A36588 A 1 01
PE-5-P01S-H-50 F31A36436 A 5 01
PE-10-P01S-H-50 F31A36615 A 10 01
PE-25-P01S-H-50 F31A36449 A 25 01
PE-50-P01S-H-50 F31A36664 A 50 01
PE-75-P01S-H-50 F31A36864 A 75 01
PE-100-P01S-H-50 F31A36592 A 100 01
PE-200-P01S-H-50 F31A36567 A 200 01
PE-1-P02S-H-50 F31B36553 A 1 02
PE-5-P02S-H-50 F31B36456 A 5 02
PE-10-P02S-H-50 F31B36467 A 10 02
PE-25-P02S-H-50 F31B36398 A 25 02
PE-50-P02S-H-50 F31B36414 A 50 02
PE-75-P02S-H-50 F31B36629 A 75 02
PE-100-P02S-H-50 F31B36419 A 100 02
PE-200-P02S-H-30 F31B36416 A 200 02
PE-1-P03S-50 F3AB00335 B 1 03
PE-5-P03S-50 F3Y00086 B 5 03
PE-10-P03S-50 F3Y00055 B 10 03
PE-25-P03S-50 F3AA02075 B 25 03
PE-50-P03S-50 F3XX00016 B 50 03
PE-75-P03S-50 F3AA01653 B 75 03
PE-100-P03S-50 F3AB00277 B 100 03
PE-200-P03S-50 D 200 03
PE-1-P04S-50 F3AB00645 B 1 04
PE-5-P04S-50 F3AB00287 B 5 04
PE-10-P04S-50 F31U37369 B 10 04
PE-25-P04S-50 F3AB00202 B 25 04
PE-50-P04S-50 F3AB00759 B 50 04
PE-75-P04S-50 F3AB00633 B 75 04
PE-100-P04S-50 F3AA00888 B 100 04
PE-200-P04S-50 F31D37797 B 200 04
35
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Polyester Felt with Stainless Steel Snap Ring®

a positive seal. Nominal micron ratings. Box qty = 50 / 30
PE-1-P01A-H-50 F31A37412 B 1 01
PE-5-P01A-H-50 F3AB00419 B 5 01
PE-10-P01A-H-50 F31A36786 B 10 01
PE-25-P01A-H-50 F3AA01146 B 25 01
PE-50-P01A-H-50 F31A37875 B 50 01
PE-75-P01A-H-50 D 75 01
PE-100-P01A-H-50 F3AB00068 B 100 01
PE-200-P01A-H-50 F3AB00920 B 200 01
PE-1-P02A-H-30 F31B36844 A 1 02
PE-5-P02A-H-50 F31B37267 A 5 02
PE-10-P02A-H-50 F3AB00558 C 10 02
PE-25-P02A-H-50 F31B37983 A 25 02
PE-50-P02A-H-50 F31B37876 A 50 02
PE-75-P02A-H-50 D 75 02
PE-100-P02A-H-50 F3AA00811 A 100 02
PE-200-P02A-H-30 F31B37848 A 200 02
PE-1-P03A-50 D 1 03
PE-5-P03A-50 F3AB00843 C 5 03
PE-10-P03A-50 D 10 03
PE-25-P03A-50 D 25 03
PE-50-P03A-50 D 50 03
PE-75-P03A-50 D 75 03
PE-100-P03A-50 F3AB00638 C 100 03
PE-200-P03A-50 F3AB00636 C 200 03
PE-1-P04A-50 F3AA02101 C 1 04
PE-5-P04A-50 F3AA02103 C 5 04
PE-10-P04A-50 F3AB00944 C 10 04
PE-25-P04A-50 D 25 04
PE-50-P04A-50 F3AB00846 C 50 04
PE-75-P04A-50 D 75 04
PE-100-P04A-50 F3AB00756 C 100 04
PE-200-P04A-50 F3AB00856 C 200 04
36
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Polyester Felt with Nylon Snap Ring®

PE-1-P01B-H-50 F3AB00408 B 1 01
PE-5-P01B-H-50 F3AB00864 B 5 01
PE-10-P01B-H-50 F3AB00219 B 10 01
PE-25-P01B-H-50 F3AB00220 B 25 01
PE-50-P01B-H-50 F3AB00049 B 50 01
PE-75-P01B-H-50 D 75 01
PE-100-P01B-H-50 F3AB00221 B 100 01
PE-200-P01B-H-50 F3AB00102 B 200 01
PE-1-P02B-H-30 F3AB00739 B 1 02
PE-5-P02B-H-50 F3AB00990 A 5 02
PE-10-P02B-H-50 F3AB00308 B 10 02
PE-25-P02B-H-50 D 25 02
PE-50-P02B-H-50 F3AB00313 B 50 02
PE-75-P02B-H-50 D 75 02
PE-100-P02B-H-50 F3AB00620 B 100 02
PE-200-P02B-H-30 F3AB00317 B 200 02
PE-1-P03B-50 F3AB00641 C 1 03
PE-5-P03B-50 F3AB00284 C 5 03
PE-10-P03B-50 F3AB00858 C 10 03
PE-25-P03B-50 F3AB00855 D 25 03
PE-50-P03B-50 F3AB00650 C 50 03
PE-75-P03B-50 F3AB00233 C 75 03
PE-100-P03B-50 F3AB00857 D 100 03
PE-200-P03B-50 F3AB00909 C 200 03
PE-1-P04B-50 F3AB00896 D 1 04
PE-5-P04B-50 F3AB00742 C 5 04
PE-10-P04B-50 D 10 04
PE-25-P04B-50 F3AB00283 C 25 04
PE-50-P04B-50 F3AB00619 C 50 04
PE-75-P04B-50 F3AB00934 C 75 04
PE-100-P04B-50 D 100 04
PE-200-P04B-50 F3AB00628 C 200 04
37
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Nylon Felt with Carbon Steel Snap Ring®

positive seal. Nominal micron ratings. Box qty = 50

N-5-P01S-H-50 F31A37080 B 5 01
N-10-P01S-H-50 F31A35869 B 10 01
N-25-P01S-H-50 F31A35799 B 25 01
N-50-P01S-H-50 F3AB00072 B 50 01
N-100-P01S-H-50 F31A36863 B 100 01
N-5-P02S-H-50 F31B37068 A 5 02
N-10-P02S-H-50 F31B36264 A 10 02
N-25-P02S-H-50 F31B36634 A 25 02
N-50-P02S-H-50 F31B36789 A 50 02
N-100-P02S-H-50 F31B37004 A 100 02
N-5-P03S-50 F3AB00161 C 5 03
N-10-P03S-50 F3AB00268 C 10 03
N-25-P03S-50 F3AB00163 C 25 03
N-50-P03S-50 F3AB00915 C 50 03
N-100-P03S-50 F3AB00630 C 100 03
N-5-P04S-50 F31D37635 C 5 04
N-10-P04S-50 F31D37636 C 10 04
N-25-P04S-50 D 25 04
N-50-P04S-50 F31D37578 C 50 04
N-100-P04S-50 F31D37634 B 100 04
SNAP-RING® Nylon Felt with Stainless Steel Snap Ring®

positive seal. Nominal micron ratings. Box qty = 50
N-5-P01A-H-50 D 5 01
N-10-P01A-H-50 D 10 01
N-25-P01A-H-50 D 25 01
N-50-P01A-H-50 D 50 01
N-100-P01A-H-50 F3AA01275 C 100 01
N-5-P02A-H-50 F3AB00294 A 5 02
N-10-P02A-H-50 F31B36091 D 10 02
N-25-P02A-H-50 F3AB00951 A 25 02
N-50-P02A-H-50 F3AB00436 A 50 02
N-100-P02A-H-50 F3AB01004 C 100 02
N-5-P03A-50 D 5 03
N-10-P03A-50 D 10 03
N-25-P03A-50 F3AB00612 C 25 03
N-50-P03A-50 D 50 03
N-100-P03A-50 D 100 03
N-5-P04A-50 D 5 04
N-10-P04A-50 F3AB00646 C 10 04
N-25-P04A-50 F3AB00570 C 25 04
N-50-P04A-50 D 50 04
N-100-P04A-50 D 100 04
38
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
® ®
SNAP-RING Nylon Felt with Nylon Snap Ring
SNAP-RING filter bags feature heavy duty sewn construction and are easy to install with a Box qty = 50
positive seal. Nominal micron ratings.
N-5-P01B-H-50 F3AB00440 C 5 01
N-10-P01B-H-50 D 10 01
N-25-P01B-H-50 D 25 01
N-50-P01B-H-50 F3AB00205 C 50 01
N-100-P01B-H-50 F3AB00973 D 100 01
N-5-P02B-H-50 F3AB00297 C 5 02
N-10-P02B-H-50 F3AB00998 D 10 02
N-25-P02B-H-50 F3AB00298 C 25 02
N-50-P02B-H-50 F3AB00658 C 50 02
N-100-P02B-H-50 F3AB00659 C 100 02
N-5-P03B-50 F3AB00166 C 5 03
N-10-P03B-50 F3AB00217 C 10 03
N-25-P03B-50 F3AB00203 C 25 03
N-50-P03B-50 F3AB00067 C 50 03
N-100-P03B-50 D 100 03
N-5-P04B-50 D 5 04
N-10-P04B-50 D 10 04
N-25-P04B-50 F3AB00997 B 25 04
N-50-P04B-50 D 50 04
N-100-P04B-50 D 100 04
® ®
SNAP-RING Teflon Felt Stainless Steel Snap Ring
a positive seal. Nominal micron ratings. Box qty = 5
PT-1-P01A-05 F5502109 C 1 01
PT-5-P01A-05 F5503199 C 5 01
PT-10-P01A-05 F5852829 C 10 01
PT-1-P02A-05 F5502119 C 1 02
PT-5-P02A-05 F5850939 C 5 02
PT-10-P02A-05 F5851789 C 10 02
® ®
SNAP-RING Nomex Felt with Stainless Steel Snap Ring
a positive seal. Nominal micron ratings. Box qty = 30
HT-1-P01A-30 D 1 01
HT-5-P01A-30 D 5 01
HT-10-P01A-30 D 10 01
HT-25-P01A-30 D 25 01
HT-50-P01A-30 F3AB00991 C 50 01
HT-100-P01A-30 F3AB00591 C 100 01
HT-1-P02A-30 F3AB00394 C 1 02
HT-5-P02A-30 D 5 02
HT-10-P02A-30 F31B36669 C 10 02
HT-25-P02A-30 F3AA01354 C 25 02
HT-50-P02A-30 F3AA00883 C 50 02
HT-100-P02A-30 F31B36742 C 100 02
39
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
® ®
SNAP-RING Nylon Monofilament with Carbon Steel Snap Ring Box qty = 20 / 30 /
SNAP-RING filter bags feature heavy duty sewn construction and are easy to install with a posi- 50 / 60 / 75
tive seal. The monofilament mesh is thermo-fixed for absolute filtration efficiency.
NMO-5-P01S-EH-20 F31A36586 C 5 01
NMO-10-P01S-EH-20 F31A36146 C 10 01
NMO-25-P01S-EH-20 F31A34027 C 25 01
NMO-50-P01S-EH-20 F31A35560 A 50 01
NMO-80-P01S-EH-20 F31A36147 A 80 01
NMO-100-P01S-EH-75 F31A34030 A 100 01
NMO-125-P01S-H-75 F31A37231 A 125 01
NMO-150-P01S-H-75 F31A34032 A 150 01
NMO-200-P01S-H-60 F31A35561 A 200 01
NMO-250-P01S-H-60 F31A35562 A 250 01
NMO-300-P01S-H-60 F31A37054 A 300 01
NMO-400-P01S-H-60 F31A34970 A 400 01
NMO-600-P01S-H-60 F31A37691 A 600 01
NMO-800-P01S-H-60 F31A34038 A 800 01
NMO-5-P02S-EH-20 F31B34067 C 5 02
NMO-10-P02S-EH-20 F31B34068 C 10 02
NMO-25-P02S-EH-20 F31B34069 C 25 02
NMO-50-P02S-EH-20 F31B35563 A 50 02
NMO-80-P02S-EH-20 F31B35564 A 80 02
NMO-100-P02S-EH-50 F31B35565 A 100 02
NMO-125-P02S-H-50 D 125 02
NMO-150-P02S-H-50 F31B36134 A 150 02
NMO-200-P02S-H-30 F31B35996 A 200 02
NMO-250-P02S-H-30 F31B35566 A 250 02
NMO-300-P02S-H-30 F31B36603 A 300 02
NMO-400-P02S-H-30 F31B34078 A 400 02
NMO-600-P02S-H-30 F31B36302 A 600 02
NMO-800-P02S-H-30 F31B34080 A 800 02
NMO-5-P03S-E-20 D 5 03
NMO-10-P03S-E-20 D 10 03
NMO-25-P03S-E-20 F3AB00356 C 25 03
NMO-50-P03S-E-20 F3AB00708 C 50 03
NMO-80-P03S-E-20 F3AB00575 C 80 03
NMO-100-P03S-E-20 F3AB00438 C 100 03
NMO-150-P03S-20 F3AB00289 C 150 03
NMO-200-P03S-20 F3AB00510 C 200 03
NMO-250-P03S-20 F3AB00629 C 250 03
NMO-300-P03S-20 F3AB00988 B 300 03
NMO-400-P03S-20 F3AB00829 C 400 03
NMO-600-P03S-20 D 600 03
NMO-800-P03S-20 F3Z00055 C 800 03
NMO-5-P04S-E-20 F3AB00592 D 5 04
NMO-10-P04S-E-20 D 10 04
NMO-25-P04S-E-20 D 25 04
NMO-50-P04S-E-20 F3AB00327 C 50 04
NMO-80-P04S-E-20 F3AB00696 C 80 04
NMO-100-P04S-E-20 F3AB00350 C 100 04
NMO-150-P04S-20 F3AA01346 C 150 04
NMO-200-P04S-20 F3AB00322 C 200 04
NMO-250-P04S-20 F3AB00753 C 250 04
NMO-300-P04S-20 F3AB00791 C 300 04
NMO-400-P04S-20 D 400 04
NMO-600-P04S-20 D 600 04
NMO-800-P04S-20 F3AB01007 D 800 04
40
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
® ®
SENTINEL Nylon Monofilament with Santoprene SENTINEL Ring
Heavy duty welded construction with patented SENTINEL ring seal for a by-pass free seal. The Box qty = 20 / 30 / 50
monofilament mesh is thermo-fixed for absolute filtration efficiency.
NMO-5-P01Z-E-20 F31A36439 B 5 01
NMO-10-P01Z-E-20 F3AB00790 B 10 01
NMO-25-P01Z-E D 25 01
NMO-50-P01Z-E D 50 01
NMO-80-P01Z-E D 80 01
NMO-100-P01Z-E D 100 01
NMO-125-P01Z-50 125 01
NMO-150-P01Z-50 F3AB00626 B 150 01
NMO-200-P01Z-50 F3AB00272 B 200 01
NMO-250-P01Z-30 F3AB00992 A 250 01
NMO-300-P01Z-60 F3AB00849 D 300 01
NMO-400-P01Z-50 F31A36291 B 400 01
NMO-600-P01Z D 600 01
NMO-800-P01Z-50 F3AB00585 B 800 01
NMO-5-P02Z-E-20 F3AB00433 B 5 02
NMO-10-P02Z-E-20 F3AB00683 B 10 02
NMO-25-P02Z-E-20 F3AB00435 B 25 02
NMO-50-P02Z-E-20 F3AA00513 B 50 02
NMO-80-P02Z-E-20 F3AB00987 D 80 02
NMO-100-P02Z-E-50 F31B36128 B 100 02
NMO-125-P02Z-50 125 02
NMO-150-P02Z-50 F3AB00546 B 150 02
NMO-200-P02Z-30 F3AB00398 B 200 02
NMO-250-P02Z-30 F31B36217 B 250 02
NMO-300-P02Z-30 F3AB00025 B 300 02
NMO-400-P02Z-50 F31B35985 B 400 02
NMO-600-P02Z-30 F31B36094 B 600 02
NMO-800-P02Z-30 F31B35989 B 800 02
NMO-5-P03Z-E-20 F3AB00962 D 5 03
NMO-10-P03Z-E-20 F3AB01005 D 10 03
NMO-25-P03Z-E-20 F3AB01006 D 25 03
NMO-50-P03Z-E-20 F3AB00955 C 50 03
NMO-80-P03Z-E-20 D 80 03
NMO-100-P03Z-E-20 F31C37229 C 100 03
NMO-150-P03Z-20 F3AB00692 C 150 03
NMO-200-P03Z-20 F3AB00654 C 200 03
NMO-250-P03Z-20 F3AB00709 C 250 03
NMO-300-P03Z-20 F3AB00710 C 300 03
NMO-400-P03Z-20 F3AA00886 C 400 03
NMO-600-P03Z-20 D 600 03
NMO-800-P03Z-20 F3AB00839 C 800 03
NMO-5-P04Z-E-20 F3AB00895 D 5 04
NMO-10-P04Z-E-20 F3AB00949 C 10 04
NMO-25-P04Z-E-20 F3AB00648 C 25 04
NMO-50-P04Z-E-20 F3AB00649 C 50 04
NMO-80-P04Z-E-20 F3AB01011 D 80 04
NMO-100-P04Z-E-20 F3AB00914 C 100 04
NMO-150-P04Z-20 F3AB00447 C 150 04
NMO-200-P04Z-20 F31D35911 C 200 04
NMO-250-P04Z-20 F3AB00288 C 250 04
NMO-300-P04Z-20 D 300 04
NMO-400-P04Z-20 F31D36213 C 400 04
NMO-600-P04Z-20 D 600 04
NMO-800-P04Z-20 D 800 04
41
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Tie-On Nylon Monofilament

Designed so that the bags can be tied onto the end of a pipe (drawstring is not included).
NMO-25-P01R-ER D 25 01
NMO-50-P01R-ER-20 F3AB00550 C 50 01
NMO-80-P01R-ER-20 F3AB00798 D 80 01
NMO-100-P01R-ER-20 F31E37053 C 100 01
NMO-150-P01R-R-20 F3AB00688 C 150 01
NMO-200-P01R-R-20 F3AB00389 C 200 01
NMO-250-P01R-R-60 F3AB00118 C 250 01
NMO-300-P01R-R-60 F3AB00936 D 300 01
NMO-400-P01R-R-20 F3AB00390 C 400 01
NMO-600-P01R-R-20 F3AB00391 C 600 01
NMO-800-P01R-R-50 F3AB00331 C 800 01
SNAP-RING® Polypropylene Monofilament with Zinc Plated Steel Snap Ring®

SNAP RING filter bags feature heavy duty sewn construction and are easy to install with a positive seal. The
PMO-200-P01S-H-50 F31B37323 B 200 01
PMO-300-P01S-H-50 F3AA00823 B 300 01
PMO-400-P01S-H-50 F31A37354 B 400 01
PMO-600-P01S-H-50 F31A37814 B 600 01
PMO-800-P01S-H-50 D 800 01
PMO-200-P02S-H-50 F3AB00719 C 200 02
PMO-300-P02S-H-50 F31B37246 C 300 02
PMO-400-P02S-H-50 F3AB00334 B 400 02
PMO-600-P02S-H-50 F3AB00602 B 600 02
PMO-800-P02S-H-50 F3AB00446 B 800 02
® ®
SNAP-RING Polypropylene Monofilament with Polypropylene Snap Ring
SNAP RING filter bags feature heavy duty sewn construction and are easy to install with a positive seal. The
PMO-200-P01O-H-50 F3AB00171 C 200 01
PMO-300-P01O-H-50 F3AB00172 C 300 01
PMO-400-P01O-H-50 F3AB00173 C 400 01
PMO-600-P01O-H-50 F3AB00174 C 600 01
PMO-800-P01O-H-50 F3AB00175 C 800 01
PMO-200-P02O-H-50 F3AB00178 C 200 02
PMO-300-P02O-H-50 F3AB00179 C 300 02
PMO-400-P02O-H-50 F3AB00180 C 400 02
PMO-600-P02O-H-50 F3AB00181 C 600 02
PMO-800-P02O-H-50 F3AB00182 C 800 02
42
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SENTINEL® Polyester Multifilament with Santoprene® SENTINEL® Ring

Heavy duty construction with patented SENTINEL ring for a by-pass free seal. The multifilament mesh has a
nominal micron rating.
PEMU-100-P01Z-50 F3AB00261 B 100 01
PEMU-150-P01Z-50 F3AB00514 B 150 01
PEMU-200-P01Z-50 D 200 01
PEMU-250-P01Z-50 F36A35640 B 250 01
PEMU-300-P01Z-50 F3AB00668 B 300 01
PEMU-400-P01Z-50 F3AA00350 B 400 01
PEMU-600-P01Z-50 D 600 01
PEMU-800-PO1Z-50 F31A36031 B 800 01
PEMU-100-PO2Z-50 F3AB00644 B 100 02
PEMU-150-PO2Z-50 F3AB00635 B 150 02
PEMU-200-P02Z-50 F31B35716 B 200 02
PEMU-250-P02Z-50 F31B35615 B 250 02
PEMU-300-P02Z-50 F3AB00908 B 300 02
PEMU-400-P02Z-50 F31B35835 B 400 02
PEMU-600-P02Z-50 F3AB00302 B 600 02
PEMU-800-P02Z-50 F31B36537 B 800 02
43
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Polyester Multifilament with Carbon Steel Snap Ring®

SNAP-RING filter bags feature heavy duty sewn construction and are easy to install with a positive
seal. The multifilament mesh has a nominal micron rating.
PEMU-100-P01S-H-50 F31A34541 A 100 01
PEMU-150-P01S-H-50 F31A34542 A 150 01
PEMU-200-P01S-H-50 F31A34543 A 200 01
PEMU-250-P01S-H-50 F31A34544 A 250 01
PEMU-300-P01S-H-50 F31A37019 A 300 01
PEMU-400-P01S-H-50 F31A34546 A 400 01
PEMU-600-P01S-H-50 F31A34547 A 600 01
PEMU-800-P01S-H-50 F31A34548 A 800 01
PEMU-100-P02S-H-50 F31B34550 A 100 02
PEMU-150-P02S-H-50 F31B34551 A 150 02
PEMU-200-P02S-H-50 F31B34552 A 200 02
PEMU-250-P02S-H-50 F31B34553 A 250 02
PEMU-300-P02S-H-50 F31B34554 A 300 02
PEMU-400-P02S-H-50 F31B34555 A 400 02
PEMU-600-P02S-H-50 F31B36788 A 600 02
PEMU-800-P02S-H-50 F31B34557 A 800 02
PEMU-100-P03S-50 F3AB00609 C 100 03
PEMU-150-P03S-50 F3AA02361 C 150 03
PEMU-200-P03S-50 F3AB00946 C 200 03
PEMU-250-P03S-50 F3AB00621 C 250 03
PEMU-300-P03S-50 F3AB00643 C 300 03
PEMU-400-P03S-50 F3AB00267 C 400 03
PEMU-600-P03S-50 D 600 03
PEMU-800-P03S-50 F3AB00677 C 800 03
PEMU-100-P04S-50 F31U36692 C 100 04
PEMU-150-P04S-50 F3AB00310 C 150 04
PEMU-200-P04S-50 F32C38577 C 200 04
PEMU-250-P04S-50 F3AB00604 C 250 04
PEMU-300-P04S-50 F3AB00437 C 300 04
PEMU-400-P04S-50 F3AB00341 C 400 04
PEMU-600-P04S-50 F3AB00958 C 600 04
PEMU-800-P04S-50 F3AB00647 C 800 04
44
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
SNAP-RING® Teflon Monofilament Mesh with Stainless Steel Snap Ring®

SNAP-RING filter bags feature heavy duty sewn construction and are easy to install with a positive seal. The
monofilament mesh has a nominal micron rating.
PTMO-100-P01A-10 F5503109 C 100 01
PTMO-150-P01A-10 F5503129 C 150 01
PTMO-200-P01A-10 F5503149 C 200 01
PTMO-250-P01A-10 F5504029 C 250 01
PTMO-400-P01A-10 F5503169 C 400 01
PTMO-600-P01A-10 F5857769 C 600 01
PTMO-100-P02A-10 F5503119 C 100 02
PTMO-150-P02A-10 F5503139 C 150 02
PTMO-200-P02A-10 F5857499 C 200 02
PTMO-250-P02A-10 F5860849 C 250 02
PTMO-400-P02A-10 F5503179 C 400 02
PTMO-600-P02A-10 F5853989 C 600 02
Tie-On Nylon Monofilament

Designed so that the bags can be tied onto the end of a pipe (drawstring is not included).
NMO-25-P01R-ER D 25 01
NMO-50-P01R-ER-20 F3AB00550 C 50 01
NMO-80-P01R-ER-20 F3AB00798 D 80 01
NMO-100-P01R-ER-20 F31E37053 C 100 01
NMO-150-P01R-R-20 F3AB00688 C 150 01
NMO-200-P01R-R-20 F3AB00389 C 200 01
NMO-250-P01R-R-60 F3AB00118 C 250 01
NMO-300-P01R-R-60 F3AB00936 D 300 01
NMO-400-P01R-R-20 F3AB00390 C 400 01
NMO-600-P01R-R-20 F3AB00391 C 600 01
NMO-800-P01R-R-50 F3AB00331 C 800 01
Tie-On Bag Accessories

1-1/2” NPT Open System Adapter Heads X809007 Celcon Plastic
2” NPT Open System Adapter Heads X809003 316 SS
45
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Bag Adder Supplement for Bags Not In Parts List EFS-33

Standard Lead Time is 15 Working Days From Receipt of Order
Consult Eaton Filtration for Minimum Quantities
Bag Bag
Cover Bag Ring Bag
Type Size Type Option
Option Description Applies to: Code Code Code Code Special Instructions
Handle, Sewn In 01, 02, sewn H Add to standard sewn snap ring
Handle, Sewn In 03, 04, 05 sewn H Add to standard sewn snap ring l
Seam Reinforcement, PE Tape NMO 01, 02 E Seam binding standard & included for <125 micron
Seam Reinforcement, PE Tape NMO 03, 04, 05 E Seam binding standard & included for <125 micron
Seam Reinforcement, PE Tape PEMU 01, 02 E Add to standard PEMU
Seam Reinforcement, PE Tape PEMU 03, 04, 05 E Add to standard PEMU
Twill Tape Collar 01, 02 sewn mesh T Add to standard sewn snap ring
Jacket, PEMU 150 01 sewn A Add to standard sewn snap ring
Tie-On (no ring or tie) 01, 02 sewn R Same as standard CS snap ring
Tie-On (no ring or tie) 03, 04 sewn R Same as standard CS snap ring
Drawstring 01, 02 sewn R Same as standard CS snap ring
Drawstring 03, 04 sewn R Same as standard CS snap ring
Reverse Collar 01, 02, 03, 04 C Add to standard sewn snap ring
Turn Inside Out 01, 02, 03, 04 U Add to standard sewn snap ring
Bag
Ring
Type
Option Description Applies to: Code Special Instructions
Stainless Steel Snap Rings 01, 02, sewn A Add to standard sewn snap ring
Stainless Steel Snap Rings 03, 04, 05 sewn A Add to standard sewn snap ring
Polypropylene Snap Rings 01, 02 sewn O Add to standard sewn snap ring. PO & PMO only.
Polypropylene Snap Rings 03, 04, 05 sewn O Add to standard sewn snap ring. PO & PMO only.
Nylon Snap Rings 01, 02 sewn B Add to standard sewn snap ring . PE, PEMU, N NMO only.
Nylon Snap Rings 03, 04, 05 sewn B Add to standard sewn snap ring . PE, PEMU, N NMO only.
PPL Sentinel® Rings 01, 02 sewn or welded E Add to standard CS sewn snap ring
PL Sentinel® Rings 03, 04, 05 sewn or welded E Add to standard CS sewn snap ring .
PE Sentinel® Rings 01, 02 sewn or welded H Add to standard CS sewn snap ring
PE Sentinel® Rings 03, 04, 05 sewn or welded H Add to standard CS sewn snap ring
Santoprene Sentinel Rings 01, 02 sewn Z Add to standard CS sewn snap ring
Santoprene Sentinel Rings 03, 04, 05 sewn Z Add to standard CS sewn snap ring .
RP Polypropylene Flange Collar 01, 02, sewn RP Add to standard CS sewn snap ring
46
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
LOFCLEANTM Resin Bonded Filter Cartridges

Porous depth filter cartridges that offer high flow rates and solids retention at low differential
pressures. A phenolic bonding resin increases mechanical strength and helps prevent fiber mi-
gration into the process media. A rigid, coreless filter cartridge that works well in viscous applica-
tions
Part Number LOFCLEAN Cartridge Code Micron Rating (Nominal) Cartridge length (inches)
LC9A2H P-2-9.75 (BOX/60) 2 9.75”
LC9A5H P-5-9.75 (BOX/60) 5 9.75”
LC9A10H P-10-9.75 (BOX/60) 10 9.75”
LC9A25H P-25-9.75 (BOX/60) 25 9.75”
LC9A50H P-50-9.75 (BOX/60) 50 9.75”
LC9A75H P-75-9.75 (BOX/60) 75 9.75”
LC9A125H P-125-9.75 (BOX/60) 125 9.75”
LC10A2H P-2-10 (BOX/60) 2 10”
LC10A5H P-5-10 (BOX/60) 5 10”
LC10A10H P-10-10 (BOX/60) 10 10”
LC10A25H P-25-10 (BOX/60) 25 10”
LC10A50H P-50-10 (BOX/60) 50 10”
LC10A75H P-75-10 (BOX/60) 75 10”
LC10A125H P-125-10 (BOX/60) 125 10”
LC19A2H P-2-19.5 (BOX/30) 2 19.5”
LC19A5H P-5-19.5 (BOX/30) 5 19.5”
LC19A10H P-10-19.5 (BOX/30) 10 19.5”
LC19A25H P-25-19.5 (BOX/30) 25 19.5”
LC19A50H P-50-19.5 (BOX/30) 50 19.5”
LC19A75H P-75-19.5 (BOX/30) 75 19.5”
LC19A125H P-125-19.5 (BOX/30) 125 19.5”
LC20A2H P-2-20 (BOX/30) 2 20”
LC20A5H P-5-20 (BOX/30) 5 20”
LC20A10H P-10-20 (BOX/30) 10 20”
LC20A25H P-25-20 (BOX/30) 25 20”
LC20A50H P-50-20 (BOX/30) 50 20”
LC20A75H P-75-20 (BOX/30) 75 20”
LC20A125H P-125-20 (BOX/30) 125 20”
47
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
LOFCLEANTM Resin Bonded Filter Cartridges

Porous depth filter cartridges that offer high flow rates and solids retention at low differential pressures. A phenolic
bonding resin increases
mechanical strength and helps prevent fiber migration into the process media. A rigid, coreless filter cartridge that
works well in viscous
applications.
Part Number LOFCLEAN Cartridge Code Micron Rating (Nominal) Cartridge length (inches)
LC29A2H P-2-29.25 (BOX/30) 2 29.25”
LC29A5H P-5-29.25 (BOX/30) 5 29.25”
LC29A10H P-10-29.25 (BOX/30) 10 29.25”
LC29A25H P-25-29.25 (BOX/30) 25 29.25”
LC29A50H P-50-29.25 (BOX/30) 50 29.25”
LC29A75H P-75-29.25 (BOX/30) 75 29.25”
LC29A125H P-125-29.25 (BOX/30) 125 29.25”
LC30A2H P-2-30 (BOX/30) 2 30”
LC30A5H P-5-30 (BOX/30) 5 30”
LC30A10H P-10-30 (BOX/30) 10 30”
LC30A25H P-25-30 (BOX/30) 25 30”
LC30A50H P-50-30 (BOX/30) 50 30”
LC30A75H P-75-30 (BOX/30) 75 30”
LC30A125H P-125-30 (BOX/30) 125 30”
LC39A2H P-2-39 (BOX/15) 2 39”
LC39A5H P-5-39 (BOX/15) 5 39”
LC39A10H P-10-39 (BOX/15) 10 39”
LC39A25H P-25-39 (BOX/15) 25 39”
LC39A50H P-50-39 (BOX/15) 50 39”
LC39A75H P-75-39 (BOX/15) 75 39”
LC39A125H P-125-39 (BOX/15) 125 39”
LC40A2H P-2-40 (BOX/15) 2 40”
LC40A5H P-5-40 (BOX/15) 5 40”
LC40A10H P-10-40 (BOX/15) 10 40”
LC40A25H P-25-40 (BOX/15) 25 40”
LC40A50H P-50-40 (BOX/15) 50 40”
LC40A75H P-75-40 (BOX/15) 75 40”
LC40A125H P-125-40 (BOX/15) 125 40”
48
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Bag Nomenclature Chart All the information necessary to understand an Eaton

filter bag description is listed below. The filter descrip-
tion listed, a PO-10-P04S-H-20S is for a polypropylene,
10 micron, plain cover, 4” x 15” filter bag with a carbon
How to read a bag description code steel ring, a twill handle, packed 20 to a small box.
Type of Material Size Ring Type Options

LOFCLEAR®-ACCUGAF®-PROGAF® 01 Short 7” Bag 7 x 16” C Reverse Collar
Snap Rings
Multi-layer melt-blown polypropylene media 02 Long 7” Bag 7 x 32” Twill tape Reinforced side and Thread
A Stainless steel snap ring E
HAYFLOW® & DURAGAF® other than standard
03 Short 4” Bag 4 x 9
Extended life polyester needled felt, no Twill tape reinforced seams, turned
PEXL B Nylon snap ring EU
scrim, glazed finish 04 Long 4” Bag 4 x 15” inside-out (automotive)
Extended life polypropylene needled 05 Triple 4” Bag 4 x 21” O Polypropylene snap ring
OXL F Thread other than standard
felt, no scrim, glazed finish
07 Rosedale 5-1/8 x 15” S Carbon steel snap ring, zinc plated H 1 Handle in twill tape
SENTINEL® Fully Welded
PE Polyester needled felt, singed 08 Rosedale 5-1/8 x 21” Sentinel® Rings K Round flat bottom (bucket shape)
PEF Polyester FDA compliant felt 09 Rosedale 5-1/8 x 32”
E Polypropylene Sentinel L Standard bag with increased length
PO Polypropylene needled felt, singed 99 Special
H Polyester Sentinel ring M Special
POF Polypropylene FDA compliant felt
N Mesh bag without felt collar
SNAP RING® and Bandseal™ Z Santoprene Sentinel ring
Cover Type
PE Polyester needled felt, singed P Packaging without plastic liner
Tie-on bag (no ring)
PO Polypropylene needled felt, singed PEMU A Q Other than standard label
N Nylon needled felt, PE scrim R Tie-on bag (no ring)
Extruded mesh cover & R Draw string for tie-on bags
HT Nomex® needled felt with scrim E
PO spunbond Other ring types
T Mesh bag with twill tape collar
PT Teflon® needled felt, Teflon scrim Ronningen Petter style plastic
NMO 80 N RP
NMO Nylon monofilament mesh flange ring W Welded side and bottom only
Plain (no cover) P
PEMO Polyester monofilament mesh M Modified/special WW Fully welded
PE Spun bonded cover R
PMO Polypropylene monofilament mesh Y Side welded/Sewn bottom & ring
PTMO Teflon monofilament mesh PO Spun bonded cover T
PEMU Polyester multifilament mesh Modified/special M Box
Dimensions
Size
18-1/8” x 12-3/16” x
Bags S
Micron Rating 0.45µm - 1250µm 7-1/8”
per Box
18-1/8” x 12-3/16” x
20 to M
14-3/16”
100
24-7/16” x 18-3/16”
L
x 14-3/16”
24-5/16” x 17-15/16”
X
x 21”
PO - 10 - P 04 S - H - 20 S
49
Filter-Technics
Tel +3232540567 Fax +3232540495
[email protected]
Housing Nomenclature Chart

All the information necessary to understand a Eaton housing description code is listed below. The exam-
ple description listed, a D-MBF-0402-AS10-040A-UT-11SEN-M is for a Duplex MAXILINE™, 4 bag ves-
sel for 7” X 32” bags, constructed of 316L stainless steel, rated at 150 psi, with 4” ANSI flange inlet/
outlets. It carries an ASME Code “U” Stamp and has a Tangential Outlet. The vessel has a glass bead-
blasted finish both inside and outside, has a QIC-LOCK® spindle type quick closure, a spring assisted lid
lifting hinge, does not have a heating jacket and is a “special” design.
Model Material In & Outlet Size Finish – Inside (1st number) and Outside (2nd number)
EBF ECOLINE™™ AB SS 316 005 ½” Stainless Steel Carbon Steel
FBF FLOWLINE™ AS SS 316 L 010 1” 0 Pickled Brush/oiled
SBF SIDELINE™ BB SS 304 012 1¼” 1 Glass bead-blasted Glass bead/sand blast
TBF TOPLINE™ BS SS 304 L 015 1½” 2 Electro-polish standard Primed
PBF POLYLINE™ CS Carbon Steel 020 2” 3 Food grade polished Paint ES-301
MBF MAXILINE™ Dome Lid PO Polypropylene Up To 4 Pharma grade polished Epoxy Coat
MDE MAXILINE™ Flat Lid PV PVC 140 14” 5 Halar coated Halar coated Special
PF PVDF 6 End User Spec End User Spec M Special
CP CPVC
Optional No. of bags Bag Size Pressure Rating In & Outlet Type Closure Style
D Duoline 01 1 7” X 16” Bag 06 90 psi
A Ansi Flange V V-Clamp
M Moduline Up To 2 7” X 32” Bag 07 100 psi
N NPT Female H Swingbolts/Hexnuts
24 3 4” X 9” Bag 10 150 psi
R Tri-Clamp S QIC-LOCK® Spindle Closure
4 4” X 15” Bag 16 225 psi
5 4” X 21” Bag 21 300 psi
Code Stamp Lid Lifting Style
N Non-code E Spring assist hinge
U U Stamp D Davit arm manual
M UM Stamp A Davit arm hydraulic
Tangential Specials
T
Outlet H Heating jacket
N Without heat jacket
D - MBF - 04 02 - AS 10 - 100 A - U T - 11 S E N - M
50

Bag Filtration Systems FT

Uploaded by

Copyright:

Available Formats

Bag Filtration Systems FT

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bag Filtration Systems FT

Uploaded by

Copyright:

Available Formats

What types of filter bags are described?

What types of filter bags are described?

What information is provided about filter housing descriptions?

What information is provided about filter housing descriptions?

Bag Filters

Filter Housings Page

Filter Bags Page

TOPLINETM - Side In/Bottom Out

Description Part Number Size Material Connection

TBF-0102-BB10-020A TBF0112SB02F304 02 304 SS 2” FLG

TBF-0101-AB10-020A TBF0111SB02F 01 316 SS 2” FLG

TBF-0102-AB10-020A TBF0112SB02F 02 316 SS 2” FLG

ASME code U stamp

Spare Parts for TOPLINE Units

SIDELINETM - Side In/Bottom Out

SBF-010-BB10-020A SBF0111SB02F304 01 304 SS 2” FLG

SBF-010-BB10-030A SBF0111SB03F304 01 304 SS 3” FLG

SBF-010-BB10-020A SBF0112SB02F304 02 304 SS 2” FLG

SBF-0102-BB10-030A SBF0112SB03F304 02 304 SS 3” FLG

SBF-0102-BB10-020A-L F3AVSB0005-304 02 304 SS 2” FLG

SBF-0101-AB10-020A SBF0111SB02F 01 316 SS 2” FLG

SBF-0101-AB10-030A SBF0111SB03F 01 316 SS 3” FLG

Steam jacket CS body only

SIDELINE Spare Parts

Description Part Number Size Material

Leg Assembly XFG11S 304 SS

Buna-N, O-Ring (Cover) XL0000024 Buna-N

VITON®, O-Ring (Cover) XL0000023 VITON

FLOWLINE™ - Side In/Bottom Out

* Replaces VITON® Gasket (XL0000081)

ECOLINETM - Side In/Bottom Out

ECOLINETM - In-Line Configuration

ECOLINETM - Loop Configuration

ECOLINE Spare Parts

* Replaces VITON® Gasket (XL0000081)

MINILINETM - (EBF) Side In/Bottom Out

MINILINETM - (EBF) In-Line

MINILINETM - (SBF) Side In/Bottom Out

MINILINETM - (SBF) In-Line

1/4” DP Taps (2)

Tri-Clover In - Out 1-1/2” series 14AM

MINILINE® (EBF) & (SBF) Spare Parts

Description Part Number Size Material

Size 03 Basket Bead Blasted XDK01DG-304 03 304 SS

Size 04 Basket Bead Blasted XDK02DG-304 04 304 SS

Size 03 Basket Bead Blasted XDK01DG-316 03 316 SS

Size 04 Basket Bead Blasted XDK02DG-316 04 316 SS

Size 05 Basket Bead Blasted XDK03DG 05 316 SS

Bag Hold Down Ring XAB85SBF01 03 & 04 316 SS

(EBF Only Parts)

EBF - Cover XL0000041SA-304 3104 SS

EBF - Cover XL0000041SA 316 SS

EBF - Buna-N, O-Ring Cover XL0000029 Buna-N

EBF - VITON®, O-Ring Cover XL0000030 VITON

EBF - EPDM, O-Ring Cover XL0000319 EPDM

EBF - V-Clamp Assembly w/T-Bolt & Handle XVS01

(SBF Only Parts)

SBF - Cover XL0000001-304 304 SS

SBF - Cover XL0000001 316 SS