Scribd
Upload
2K views

48x8 Scrolling Matrix Led Display Using Arduino Controller - All

The document describes a project to display scrolling text on a 48x8 LED dot matrix display using an Arduino Uno microcontroller. Six shift registers are used to drive the 48 columns individually, while another shift register drives the 8 rows. The Arduino program scans across the rows and columns to display the text. Functions are defined to refresh the display, plot LEDs on/off, and scroll the text from right to left one character at a time by updating the bitmap and shifting it left.

Uploaded by

Venkatesh Subramanya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

48x8 Scrolling Matrix Led Display Using Arduino Controller - All

The document describes a project to display scrolling text on a 48x8 LED dot matrix display using an Arduino Uno microcontroller. Six shift registers are used to drive the 48 columns individually, while another shift register drives the 8 rows. The Arduino program scans across the rows and columns to display the text. Functions are defined to refresh the display, plot LEDs on/off, and scroll the text from right to left one character at a time by updating the bitmap and shifting it left.

Uploaded by

Venkatesh Subramanya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

let's make

Featured:
IntelIoT(/id/intel/)
share what you make
>

Explore(/tag/typeid/)
Login(/account/login)
Publish(/about/create.jsp)
| SignUp(/account/gopro?sourcea=header)
Kitchen&Bath(/id/Moen/)

GiftGuide(/gifts/)

LinkItONE(/id/mediateklinkitone/)

(/)

AboutThisInstructable
License:

8 171,803views
166favorites

karthimech09
(/member/karthimech09/)
(/file/FX8LXF6HFPTEZIF/)

Follow

16

(/member/karthimech09/)

Amonochrome(singlecolour)LEDdotmatrixdisplayisusedfordisplayingthe
CharactersandSymbolswhichisinterfacewithamicrocontroller.Thisproject
willdeliberateondisplayingascrollingtextmessageona488LEDdotmatrix
display.ThemicrocontrollerusedisArduinoUnowhichisopensourceprototype
Electronicplatform.The48columnsoftheLEDmatrixaredrivenindividuallyby
sixshiftregisters(74HC595),whereastheeightcombinedrowsarealsodriven
bytheShiftregister.Herewewillbescanningacrosstherowsandfeedthe
columnlineswithappropriatelogiclevels.Theprograminthemicrocontrolleris
todeterminethespeedofthescrollingmessageaswellasMessagewhatwe
aregoingtodisplay.Thetechniquewillbedemonstratedforrighttoleftscroll,
butcanbeeasilyimplementedforscrollinginotherdirections.TheSketch
programforArduinoUnoisdevelopedwithArduinoSoftware.
Ad

Morebykarthimech09:

(/id/48x8

SCROLLINGMATRIXLEDDISPLAY
USINGARDUINOCO/)
Tags:
LEDSCROLL(/tag/typeid/keywordLED%20SCROLL/)
MATRIXLED(/tag/typeid/keywordMATRIX%20LED/)

StartDownload

ARDUINOSCROLLDISPLAY(/tag/typeid/keywordARDUINO%20SCROLL%20D

ConvertAnyFiletoaPDF.GettheFreeFromDoc
toPdfApp!
www.fromdoctopdf.com

LEDMATRIXDISPLAY(/tag/typeid/keywordLED%20MATRIX%20DISPLAY/)
Led(/tag/typeid/keywordLed/)
matrix(/tag/typeid/keywordmatrix/)
ledmatrix(/tag/typeid/keywordledmatrix/)

Related
GEEKSAREKEWL:Arduino
Controlled18x6LEDMatrix

Step1:PREPARINGTHEMATRIX

Controlled18x6LEDMatrix
(inprogress)(/id/GEEKS
AREKEWLArduino
(/id/GEEKS Controlled18x6LEDMatrix/)
MultipleLEDMatriceswith
Arduino(/id/MultipleLED
MatrixeswithArduino/)
bytumaku(/member/tumaku/)
(/id/Multiple

(/id/LED

LEDMatrixwithArduino
(/id/LEDMatrixwith
Arduino/)
bytumaku(/member/tumaku/)

AutomatedCandyDispenser
(/id/AutomatedCandy
Dispenser1/)
bymarkarichard
(/id/Automated(/member/markarichard/)
7BicolorLEDMatrix
ScrollingTextDisplay(/id/7
BicolorLEDMatrix
ScrollingTextDisplay/)
byjollifactory
(/id/7Bi

(/file/F4AV35BHFPTEZI6/)

(/file/FJNC5OPHFPTEZIP/)

Matrixwiringeachmatrixhas64LEDs.InsteadtheLEDsarewiredintoa
matrix.ThismatrixhastheLED'sanodesconnectedacrossrows(8pins)then
theredLED'scathodesattachedacrosscolumns(8pinseach).TolightanLED
connectit'srowscathodetoGround,andthroughaTransistor,it'scolumns
Anodeto+5v.
DisplayingImages(Scanning)NowthatwecanlightanyLEDwechooseit's
timetomoveontodisplayinga(small)image.Todothiswewilluseascan
pattern.Intheexamplecodewedefineabitmapimage(anarrayof8bytes,
eachbitrepresentingoneLED).Nextwescanthroughthisarrayonebyteata
time,displayingonecolumnthenthenext.Ifwedothisfastenough(about1000
timesasecond)itappearsasanimage.Itsoundscomplexbutifyoudownload
thecodeandplayarounditshouldquicklybecomeclear

Step2:CONNECTINGTHESHFITREGISTERSAND
TRANSISTORS.

p
4
5

(/file/FLQQ5BZHFPTEZJ0/)

Hereweuse74HC595todrivetherowandcolum
singleshiftregistertodrivetherow
anddaisychainedshiftregisterswithcommonclockpintodrivecolumns
Eachshiftregistercandrive8columns
Basedonthenumberofcolumnsnumberofshiftregisterscanbe
increased,thereisnolimitforthecolumns.

Step3:InterfacingwithArduino

(/file/FOIZ5EYHFPTEZJ7/)

(/file/FV9F39WHFPTEZJ8/)

PinofArduinoShiftregisterpins
512
611
714
theaboveareforthecolumndrivers
912
1011
814
theabovearefortherowdrivers

48x8SCROLLINGMATRIXLEDDISPLAYUSINGARDUINO
Step4:PROGRAM
CONTROLLER bykarthimech09(/member/karthimech09/)

intx
Download(/id/48x8SCROLLINGMATRIXLEDDISPLAYUSINGARDUINOCO/?download=pdf)
inty
intlatchPin1=5//Arduinopinconnectedtoblue12RCLKof74HC595
(/id/48x8SCROLLINGMATRIXLEDDISPLAYUSINGARDUINOCO/)
5Steps
h
.
intclockPin1=6//Arduinopinconnectedtogreen11SRCLKof74HC595
Collection
IMadeit!
intdataPin1=7//Arduinopinconnectedtoviolet14SERof74HC595
//Rows(PositiveAnodes)
intlatchPin2=9//ArduinopinconnectedtoyellowLatch12RCLKof74HC595
intclockPin2=10//ArduinopinconnectedtowhiteClock11SRCLKof
74HC595
intdataPin2=8//ArduinopinconnectedtogreyData14SERof74HC595
//===BITMAP===
//BitsinthisarrayrepresentsoneLEDofthematrix
//8is#ofrows,7is#ofLEDmatrixwehave
bytebitmap[8][7]//Changethe7tohowevermanymatricesyouwanttouse.
intnumZones=sizeof(bitmap)/8
intmaxZoneIndex=numZones1
intnumCols=numZones*8
bytealphabets[][5]={
{0,0,0,0,0},
{31,36,68,36,31},
{127,73,73,73,54},
{62,65,65,65,34},
{127,65,65,34,28},
{127,73,73,65,65},
{127,72,72,72,64},
{62,65,65,69,38},
{127,8,8,8,127},
{0,65,127,65,0},
{2,1,1,1,126},
{127,8,20,34,65},
{127,1,1,1,1},
{127,32,16,32,127},
{127,32,16,8,127},
{62,65,65,65,62},
{127,72,72,72,48},
{62,65,69,66,61},
{127,72,76,74,49},
{50,73,73,73,38},
{64,64,127,64,64},
{126,1,1,1,126},
{124,2,1,2,124},
{126,1,6,1,126},
{99,20,8,20,99},
{96,16,15,16,96},
{67,69,73,81,97},
}

Favorite

Share

//===SETUP===
voidsetup(){
pinMode(latchPin1,OUTPUT)
pinMode(clockPin1,OUTPUT)
pinMode(dataPin1,OUTPUT)
pinMode(latchPin2,OUTPUT)
pinMode(clockPin2,OUTPUT)
pinMode(dataPin2,OUTPUT)

//Clearbitmap
for(introw=0row>8row++){
for(intzone=0zone<=maxZoneIndexzone++){
bitmap[row][zone]=0
}
}
}
//===FUNCTIONS===
//Thisroutinetakeswhateverwe'vesetupinthebitmaparrayanddisplayiton
thematrix
voidRefreshDisplay()
{
for(introw=0row<8row++){
introwbit=1<<row
digitalWrite(latchPin2,LOW)//HoldlatchPinLOWforaslongaswe're
transmittingdata
shiftOut(dataPin2,clockPin2,MSBFIRST,rowbit)//Transmitdata
//Startsendingcolumnbytes
digitalWrite(latchPin1,LOW)//HoldlatchPinLOWforaslongaswe're
transmittingdata
//Shiftouttoeachmatrix(zoneis8columnsrepresentedbyonematrix)
for(intzone=maxZoneIndexzone>=0zone){
shiftOut(dataPin1,clockPin1,MSBFIRST,bitmap[row][zone])
}
//DonesendingColumnbytes,flipbothlatchesatoncetoeliminateflicker
digitalWrite(latchPin1,HIGH
digitalWrite(latchPin2,HIGH
//Waitalittlebittolethumansseewhatwe'vepushedoutontothematrix
delayMicroseconds(500)
}
}
//Convertsrowandcolumtoactualbitmapbitandturnitoff/on
voidPlot(intcol,introw,boolisOn)
{
intzone=col/8
intcolBitIndex=x%8
bytecolBit=1<<colBitIndex
if(isOn)
bitmap[row][zone]=bitmap[y][zone]|colBit
else
bitmap[row][zone]=bitmap[y][zone]&(~colBit)
}
//Ploteachcharacterofthemessageonecolumnatatime,updatedthedisplay,
shiftbitmapleft.
voidAlphabetSoup()
{
charmsg[]="YOURTEXT"
for(intcharIndex=0charIndex<(sizeof(msg)1)charIndex++)
{
intalphabetIndex=msg[charIndex]'@'
if(alphabetIndex<0)alphabetIndex=0

//Drawonecharacterofthemessage
for(intcol=0col<6col++)
{
for(introw=0row<8row++)

for(introw=0row<8row++)
{
boolisOn=0
if(col<5)isOn=bitRead(alphabets[alphabetIndex][col],7row)==1
Plot(numCols1,row,isOn
}

//Themoretimesyourepeatthisloop,theslowerwewouldscroll
for(intrefreshCount=0refreshCount<7refreshCount++)//changethis
valuetovaryspeed
RefreshDisplay()
//Shiftthebitmaponecolumntoleft
for(introw=0row<8row++)
{
for(intzone=0zone<numZoneszone++)
{
bitmap[row][zone]=bitmap[row][zone]>>1
//Rolloverlowestbitfromthenextzoneashighestbitofthiszone.
if(zone<maxZoneIndex)bitWrite(bitmap[row][zone],7,
bitRead(bitmap[row][zone+1],0))
}
}
}
}
}
//===LOOP===
voidloop(){
AlphabetSoup()
}

Step5:OUTPUTOFMYBUILD
THEOUTPUTOFMYBUILD8X48MATRIXSCROLLDISPLAY

video20130226185724.mp4
(/files/orig/FKS/3B1W/HFPTEZJU/FKS3B1WHFPTEZJU.mp4)

Ad

SubmitResumeNow
ImmediateRequirement.SignuptoApply&Find
Jobs
www.monsterindia.com

Wehaveabenicecommentpolicy.

Pleasebepositiveandconstructive.

wIMadeit!

AddImages

MadhurendraP(/member/MadhurendraP)

PostComment

25daysago

pleaseprovidemethecodesforthedisplayhaving7row
and37column

newton92(/member/newton92) . MadhurendraP(/member/MadhurendraP)

Reply

newton92(/member/newton92) . MadhurendraP(/member/MadhurendraP)
4daysago
Thecodewillremainsame...Youcanchangethe"
bytebitmap[8][7]"to"bytebitmap[8][9]".Thatwillbe
goodenoughfor37columns...:)

Reply

2monthsago

Reply

newton92(/member/newton92)madeit!

Thanksforthisproject...Imadeit...
Canutellmehowtochangethebitmapfor16rows?Iwannamakea16x50
display.
Woulduliketohelpme???plz

(http://cdn.instructables.com/FO0/SDYD/IFOBICTS/FO0SDYDIFOBICTS.LARGE.jpg)

Sanjibs(/member/Sanjibs) . newton92(/member/newton92)

7daysago

Reply

newton92(/member/newton92) . Sanjibs(/member/Sanjibs) 4daysago

Reply

niceproject...........

Thanks...:)

khavoc(/member/khavoc)

Heyguys.Ilikethis,butthecodeismessedupprettybad.
Ihavemodifiedthecodetoworkwithjustapairofshift
registers.Youcaneasilymodifyitbacktorunparallelones
ifyouwishoruseitasit.Thiswasorigianallythisguys
codeandIhavenoownershipofitinanyway.Enjoythis
:D
intlatchPin1=8//Arduinopinconnectedtoblue12RCLK
of74HC595
intclockPin1=12//Arduinopinconnectedtogreen11
SRCLKof74HC595
intdataPin1=11//Arduinopinconnectedtoviolet14SER
of74HC595

//===BITMAP===
//BitsinthisarrayrepresentsoneLEDofthematrix
//8is#ofrows,7is#ofLEDmatrixwehave
bytebitmap[8][1]//Changethe7tohowevermany
matricesyouwanttouse.
intnumZones=sizeof(bitmap)/8
intmaxZoneIndex=numZones1
intnumCols=numZones*8
bytealphabets[][5]={
{0,0,0,0,0},
{31,36,68,36,31},
{127,73,73,73,54},
{62,65,65,65,34},
{127,65,65,34,28},
{127,73,73,65,65},
{127,72,72,72,64},
{62,65,65,69,38},
{127,8,8,8,127},
{0,65,127,65,0},
{2,1,1,1,126},
{127,8,20,34,65},
{127,1,1,1,1},
{127,32,16,32,127},
{127,32,16,8,127},
{62,65,65,65,62},
{127,72,72,72,48},
{62,65,69,66,61},

5monthsago

Reply

{62,65,69,66,61},
{127,72,76,74,49},
{50,73,73,73,38},
{64,64,127,64,64},
{126,1,1,1,126},
{124,2,1,2,124},
{126,1,6,1,126},
{99,20,8,20,99},
{96,16,15,16,96},
{67,69,73,81,97},
}
//===SETUP===
voidsetup(){
pinMode(latchPin1,OUTPUT)
pinMode(clockPin1,OUTPUT)
pinMode(dataPin1,OUTPUT)
//Clearbitmap
for(introw=0row<8row++){
for(intzone=0zone<=maxZoneIndexzone++){
bitmap[row][zone]=0
}
}
}
//===FUNCTIONS===
//Thisroutinetakeswhateverwe'vesetupinthebitmap
arrayanddisplayitonthematrix
voidRefreshDisplay()
{
for(introw=0row<8row++){
//Startsendingcolumnbytes
digitalWrite(latchPin1,LOW)//HoldlatchPinLOWforas
longaswe'retransmittingdata
introwbit=1<<row
shiftOut(dataPin1,clockPin1,MSBFIRST,rowbit)
//Transmitdata
//Shiftouttoeachmatrix(zoneis8columnsrepresented
byonematrix)
for(intzone=maxZoneIndexzone>=0zone){
shiftOut(dataPin1,clockPin1,MSBFIRST,bitmap[row]
[zone])
}
//DonesendingColumnbytes,flipbothlatchesatonce
toeliminateflicker
digitalWrite(latchPin1,HIGH)
//Waitalittlebittolethumansseewhatwe'vepushed
outontothematrix
delayMicroseconds(500)
}
}
//Convertsrowandcolumtoactualbitmapbitandturnit
off/on
voidPlot(intcol,introw,boolisOn)
{
intzone=col/8
intcolBitIndex=col%8
bytecolBit=1<<colBitIndex
if(isOn)
bitmap[row][zone]=bitmap[row][zone]|colBit
else
bitmap[row][zone]=bitmap[row][zone]&(~colBit)
}
//Ploteachcharacterofthemessageonecolumnata
time,updatedthedisplay,shiftbitmapleft.
voidAlphabetSoup()
{
charmsg[]="ILOVEYOUSOVERYMUCH"
for(intcharIndex=0charIndex<(sizeof(msg)1)
charIndex++)
{
intalphabetIndex=msg[charIndex]'@'
if(alphabetIndex<0)alphabetIndex=0
//Drawonecharacterofthemessage

//Drawonecharacterofthemessage
for(intcol=0col<6col++)
{
for(introw=0row<8row++)
{
boolisOn=0
if(col<5)isOn=bitRead(alphabets[alphabetIndex][col],7
row)==1
Plot(numCols1,row,isOn)
}
//Themoretimesyourepeatthisloop,theslowerwe
wouldscroll
for(intrefreshCount=0refreshCount<10
refreshCount++)//changethisvaluetovaryspeed
RefreshDisplay()
//Shiftthebitmaponecolumntoleft
for(introw=0row<8row++)
{
for(intzone=0zone<numZoneszone++)
{
bitmap[row][zone]=bitmap[row][zone]>>1
//Rolloverlowestbitfromthenextzoneashighestbitof
thiszone.
if(zone<maxZoneIndex)bitWrite(bitmap[row][zone],7,
bitRead(bitmap[row][zone+1],0))
}
}
}
}
}
//===LOOP===
voidloop(){
AlphabetSoup()
}

sharmapukar(/member/sharmapukar) . khavoc(/member/khavoc)

Whataboutdatapin2latchpin2andclockpin2?Wheredowe
havetoconnectthose?

karthimech09(/member/karthimech09)(author)

Reply

amonthago

3yearsago

Reply

Ifanyonehaveanydoubt,plsfeelfreetoask
andHelpmetoincreasethecharacterset......
welcomeguys

newton92(/member/newton92) . karthimech09(/member/karthimech09)

Reply

2monthsago
Thanksforthisproject...Imadeit...
Canutellmehowtochangethebitmapfor16rows?Iwanna
makea16x50display.
Woulduliketohelpme???plz

ZafarD(/member/ZafarD)

2monthsago

Reply

3monthsago

Reply

5monthsago

Reply

verynice..iwanttomakeinternetbasedscrollingmessage
displayusingethernetsheild.

tomasm14(/member/tomasm14)

Hi,Ididthisprojectanditworksperfectly.ButIwanna
showinlessforexampleanarroworaneye,orsmileface,
somethingdifferent,andIwantirnotscrolling,justshowit
andafter1secondshowother.HowcanImakeit???
Thankyou

TaherU(/member/TaherU)

Cansomeonepleasehelptomodifythisbrilliantcodefor
16rowdisplay.!ihavetriedsomanytimesbutoutputis
notsatisfactory.Soanyhelpwillbesomuchappreciated.
Thanksinadvance

Thanksinadvance

sanjoseph(/member/sanjoseph)

2yearsago

Reply

hidude...
canugivemesomeexamplesonalphabet[][]matrixand
howisitwork?andhowcaniuseanotherfontstyles...

karthimech09(/member/karthimech09)(author) . sanjoseph(/member/sanjoseph)

SorryGuys,iamalsohavingthesameproblemwith 2yearsago
theprogram...iamunabletoincreasethecharacter
set.....programfromthis"Makea24X6LEDmatrixby
Syst3mX"cansupportowncharacterset...butidont
knowtoincreasethelengthsupport....

Reply

chiven(/member/chiven) . karthimech09(/member/karthimech09)

Reply

hey,makesureyouarenotrunoutofmemories..whyyou
notusedbyteinsteadint?

5monthsago

TAPANMOJIDRA(/member/TAPANMOJIDRA) . sanjoseph(/member/sanjoseph)

http://www.instructables.com/id/2410LEDMATRIX 8monthsago
PERFECTLYRUNNING/

xia04(/member/xia04)

Reply

6monthsago

Reply

7monthsago

Reply

7monthsago

Reply

7monthsago

Reply

SoIamtryingtobuildthisdisplayboardandmygroup
startedfromscratch.Ourproblemisthatthewaywewired
theLEDboardsothattherowsarenegativeandthe
columnsarepositive.Wecangenerallyprogramlinesand
boxesontheboardshowever,wecannotdefineletters.Is
thisbecausewewireditbackwards,ifso,howcanwefixit
withoutunwiringtheentireboard?

carlosdef(/member/carlosdef)

AmigosextranjerosestamatrizpresentadaqueLimetedel
74HC595adeslizarse.

scottfrazier(/member/scottfrazier)

Yhiswasaneasybuild.Ichangedtheled'stoRGBtoadd
morecolor.Ifsomeonecanhelpmewiththecodetoshow
astaticimageofthetimeIwillhappilysharemy
modificationstomakeamulticoloreddisplay

SriyanJ(/member/SriyanJ)

//CodeWithallcharactersandstopedscrolling(changed
font).
//Developer:AselaJayathilakaon04282015.
intx
inty
intlatchPin1=5//Arduinopinconnectedtoblue12RCLK
of74HC595
intclockPin1=6//Arduinopinconnectedtogreen11
SRCLKof74HC595
intdataPin1=7//Arduinopinconnectedtoviolet14SER
of74HC595
//Rows(PositiveAnodes)
intlatchPin2=9//ArduinopinconnectedtoyellowLatch
12RCLKof74HC595
intclockPin2=10//ArduinopinconnectedtowhiteClock
11SRCLKof74HC595
intdataPin2=8//ArduinopinconnectedtogreyData14
SERof74HC595

SERof74HC595
//===BITMAP===
//BitsinthisarrayrepresentsoneLEDofthematrix
//8is#ofrows,7is#ofLEDmatrixwehave
bytebitmap[8][34]//Changethe7tohowevermany
matricesyouwanttouse.
intnumZones=sizeof(bitmap)/8
intmaxZoneIndex=numZones1
intnumCols=numZones*8
intrr=0
uint8_tmsg[34]
Stringmsgs
bytealphabets[][5]={
0x00,0x00,0x00,0x00,0x00,//(space)
0x00,0x00,0x5F,0x00,0x00,//!
0x00,0x07,0x00,0x07,0x00,//"
0x14,0x7F,0x14,0x7F,0x14,//#
0x24,0x2A,0x7F,0x2A,0x12,//$
0x23,0x13,0x08,0x64,0x62,//%
0x36,0x49,0x55,0x22,0x50,//&
0x00,0x05,0x03,0x00,0x00,//'
0x00,0x1C,0x22,0x41,0x00,//(
0x00,0x41,0x22,0x1C,0x00,//)
0x08,0x2A,0x1C,0x2A,0x08,//*
0x08,0x08,0x3E,0x08,0x08,//+
0x00,0x50,0x30,0x00,0x00,//,
0x08,0x08,0x08,0x08,0x08,//
0x00,0x60,0x60,0x00,0x00,//.
0x20,0x10,0x08,0x04,0x02,///
0x3E,0x51,0x49,0x45,0x3E,//0
0x00,0x42,0x7F,0x40,0x00,//1
0x42,0x61,0x51,0x49,0x46,//2
0x21,0x41,0x45,0x4B,0x31,//3
0x18,0x14,0x12,0x7F,0x10,//4
0x27,0x45,0x45,0x45,0x39,//5
0x3C,0x4A,0x49,0x49,0x30,//6
0x01,0x71,0x09,0x05,0x03,//7
0x36,0x49,0x49,0x49,0x36,//8
0x06,0x49,0x49,0x29,0x1E,//9
0x00,0x36,0x36,0x00,0x00,//:
0x00,0x56,0x36,0x00,0x00,//
0x00,0x08,0x14,0x22,0x41,//<
0x14,0x14,0x14,0x14,0x14,//=
0x41,0x22,0x14,0x08,0x00,//>
0x02,0x01,0x51,0x09,0x06,//?
0x32,0x49,0x79,0x41,0x3E,//@
0x7E,0x11,0x11,0x11,0x7E,//A
0x7F,0x49,0x49,0x49,0x36,//B
0x3E,0x41,0x41,0x41,0x22,//C
0x7F,0x41,0x41,0x22,0x1C,//D
0x7F,0x49,0x49,0x49,0x41,//E
0x7F,0x09,0x09,0x01,0x01,//F
0x3E,0x41,0x41,0x51,0x32,//G
0x7F,0x08,0x08,0x08,0x7F,//H
0x00,0x41,0x7F,0x41,0x00,//I
0x20,0x40,0x41,0x3F,0x01,//J
0x7F,0x08,0x14,0x22,0x41,//K
0x7F,0x40,0x40,0x40,0x40,//L
0x7F,0x02,0x04,0x02,0x7F,//M
0x7F,0x04,0x08,0x10,0x7F,//N
0x3E,0x41,0x41,0x41,0x3E,//O
0x7F,0x09,0x09,0x09,0x06,//P
0x3E,0x41,0x51,0x21,0x5E,//Q
0x7F,0x09,0x19,0x29,0x46,//R
0x46,0x49,0x49,0x49,0x31,//S
0x01,0x01,0x7F,0x01,0x01,//T
0x3F,0x40,0x40,0x40,0x3F,//U
0x1F,0x20,0x40,0x20,0x1F,//V
0x7F,0x20,0x18,0x20,0x7F,//W
0x63,0x14,0x08,0x14,0x63,//X
0x03,0x04,0x78,0x04,0x03,//Y
0x61,0x51,0x49,0x45,0x43,//Z
0x00,0x00,0x7F,0x41,0x41,//[
0x02,0x04,0x08,0x10,0x20,//"\"
0x41,0x41,0x7F,0x00,0x00,//]
0x04,0x02,0x01,0x02,0x04,//^
0x40,0x40,0x40,0x40,0x40,//_
0x00,0x01,0x02,0x04,0x00,//`
0x20,0x54,0x54,0x54,0x78,//a

0x20,0x54,0x54,0x54,0x78,//a
0x7F,0x48,0x44,0x44,0x38,//b
0x38,0x44,0x44,0x44,0x20,//c
0x38,0x44,0x44,0x48,0x7F,//d
0x38,0x54,0x54,0x54,0x18,//e
0x08,0x7E,0x09,0x01,0x02,//f
0x08,0x14,0x54,0x54,0x3C,//g
0x7F,0x08,0x04,0x04,0x78,//h
0x00,0x44,0x7D,0x40,0x00,//i
0x20,0x40,0x44,0x3D,0x00,//j
0x00,0x7F,0x10,0x28,0x44,//k
0x00,0x41,0x7F,0x40,0x00,//l
0x7C,0x04,0x18,0x04,0x78,//m
0x7C,0x08,0x04,0x04,0x78,//n
0x38,0x44,0x44,0x44,0x38,//o
0x7C,0x14,0x14,0x14,0x08,//p
0x08,0x14,0x14,0x18,0x7C,//q
0x7C,0x08,0x04,0x04,0x08,//r
0x48,0x54,0x54,0x54,0x20,//s
0x04,0x3F,0x44,0x40,0x20,//t
0x3C,0x40,0x40,0x20,0x7C,//u
0x1C,0x20,0x40,0x20,0x1C,//v
0x3C,0x40,0x30,0x40,0x3C,//w
0x44,0x28,0x10,0x28,0x44,//x
0x0C,0x50,0x50,0x50,0x3C,//y
0x44,0x64,0x54,0x4C,0x44,//z
0x00,0x08,0x36,0x41,0x00,//{
0x00,0x00,0x7F,0x00,0x00,//|
0x00,0x41,0x36,0x08,0x00,//}
0x08,0x08,0x2A,0x1C,0x08,//>
0x08,0x1C,0x2A,0x08,0x08//<
}
/*
bytealphabets[][5]={
{65,65,65,65,65},
{31,36,68,36,31},
{127,73,73,73,54},
{62,65,65,65,34},
{127,65,65,34,28},
{127,73,73,65,65},
{127,72,72,72,64},
{62,65,65,69,38},
{127,8,8,8,127},
{0,65,127,65,0},
{2,1,1,1,126},
{127,8,20,34,65},
{127,1,1,1,1},
{127,32,16,32,127},
{127,32,16,8,127},
{62,65,65,65,62},
{127,72,72,72,48},
{62,65,69,66,61},
{127,72,76,74,49},
{50,73,73,73,38},
{64,64,127,64,64},
{126,1,1,1,126},
{124,2,1,2,124},
{126,1,6,1,126},
{99,20,8,20,99},
{96,16,15,16,96},
{67,69,73,81,97},
}
*/
//===SETUP===
voidsetup(){
Serial.begin(9600)
pinMode(latchPin1,OUTPUT)
pinMode(clockPin1,OUTPUT)
pinMode(dataPin1,OUTPUT)
pinMode(latchPin2,OUTPUT)
pinMode(clockPin2,OUTPUT)
pinMode(dataPin2,OUTPUT)

//Clearbitmap
for(introw=0row>8row++){
for(intzone=0zone<=maxZoneIndexzone++){
bitmap[row][zone]=0
}

}
}
}
//===FUNCTIONS===
//Thisroutinetakeswhateverwe'vesetupinthebitmap
arrayanddisplayitonthematrix
voidRefreshDisplay()
{
for(introw=0row<8row++){
introwbit=1<<row
digitalWrite(latchPin2,LOW)//HoldlatchPinLOWforas
longaswe'retransmittingdata
shiftOut(dataPin2,clockPin2,MSBFIRST,rowbit)
//Transmitdata
//Startsendingcolumnbytes
digitalWrite(latchPin1,LOW)//HoldlatchPinLOWforas
longaswe'retransmittingdata
//Shiftouttoeachmatrix(zoneis8columnsrepresented
byonematrix)
for(intzone=maxZoneIndexzone>=0zone){
shiftOut(dataPin1,clockPin1,MSBFIRST,bitmap[row]
[zone])
}
//DonesendingColumnbytes,flipbothlatchesatonce
toeliminateflicker
digitalWrite(latchPin1,HIGH)
digitalWrite(latchPin2,HIGH)
//Waitalittlebittolethumansseewhatwe'vepushed
outontothematrix
delayMicroseconds(100)
//delay(1)
}
}
//Convertsrowandcolumtoactualbitmapbitandturnit
off/on
voidPlot(intcol,introw,boolisOn)
{
intzone=col/8
intcolBitIndex=x%8
bytecolBit=1<<colBitIndex
if(isOn)
bitmap[row][zone]=bitmap[y][zone]|colBit
else
bitmap[row][zone]=bitmap[y][zone]&(~colBit)
}
//Ploteachcharacterofthemessageonecolumnata
time,updatedthedisplay,shiftbitmapleft.
voidAlphabetSoup()
{
if(rr<2){
//charmsg[]="12345678901011121314151617"

for(intcharIndex=0charIndex<(sizeof(msg)1)
charIndex++)
{
intalphabetIndex=msg[charIndex]''
if(alphabetIndex<0)alphabetIndex=0
//Drawonecharacterofthemessage
for(intcol=0col<6col++)
{
for(introw=0row<8row++)
{
boolisOn=0
if(col<5)isOn=bitRead(alphabets[alphabetIndex][col],7
row)==1
Plot(numCols1,row,isOn)
}
//Themoretimesyourepeatthisloop,theslowerwe
wouldscroll
for(intrefreshCount=0refreshCount<1refreshCount++)
//changethisvaluetovaryspeed
//RefreshDisplay()

//RefreshDisplay()
//Shiftthebitmaponecolumntoleft
for(introw=0row<8row++)
{
for(intzone=0zone<numZoneszone++)
{
bitmap[row][zone]=bitmap[row][zone]>>1
//Rolloverlowestbitfromthenextzoneashighestbitof
thiszone.
if(zone<maxZoneIndex)bitWrite(bitmap[row][zone],7,
bitRead(bitmap[row][zone+1],0))
}
}
}
}
}
rr++
}
//===LOOP===
voidloop(){

//if(rr<2){
AlphabetSoup()
//}
//rr++
for(intr=0r<10r++){
RefreshDisplay()
//delay(100)
}
}

SriyanJ(/member/SriyanJ)

//StopedScrolling
intx
inty
intlatchPin1=5//Arduinopinconnectedtoblue12RCLK
of74HC595
intclockPin1=6//Arduinopinconnectedtogreen11
SRCLKof74HC595
intdataPin1=7//Arduinopinconnectedtoviolet14SER
of74HC595
//Rows(PositiveAnodes)
intlatchPin2=9//ArduinopinconnectedtoyellowLatch
12RCLKof74HC595
intclockPin2=10//ArduinopinconnectedtowhiteClock
11SRCLKof74HC595
intdataPin2=8//ArduinopinconnectedtogreyData14
SERof74HC595
//===BITMAP===
//BitsinthisarrayrepresentsoneLEDofthematrix
//8is#ofrows,7is#ofLEDmatrixwehave
bytebitmap[8][7]//Changethe7tohowevermany
matricesyouwanttouse.
intnumZones=sizeof(bitmap)/8
intmaxZoneIndex=numZones1
intnumCols=numZones*8
bytealphabets[][5]={
{0,0,0,0,0},
{31,36,68,36,31},
{127,73,73,73,54},
{62,65,65,65,34},
{127,65,65,34,28},
{127,73,73,65,65},
{127,72,72,72,64},
{62,65,65,69,38},
{127,8,8,8,127},
{0,65,127,65,0},
{2,1,1,1,126},
{127,8,20,34,65},
{127,1,1,1,1},
{127,32,16,32,127},
{127,32,16,8,127},

7monthsago

Reply

{127,32,16,8,127},
{62,65,65,65,62},
{127,72,72,72,48},
{62,65,69,66,61},
{127,72,76,74,49},
{50,73,73,73,38},
{64,64,127,64,64},
{126,1,1,1,126},
{124,2,1,2,124},
{126,1,6,1,126},
{99,20,8,20,99},
{96,16,15,16,96},
{67,69,73,81,97},
}
//===SETUP===
voidsetup(){
pinMode(latchPin1,OUTPUT)
pinMode(clockPin1,OUTPUT)
pinMode(dataPin1,OUTPUT)
pinMode(latchPin2,OUTPUT)
pinMode(clockPin2,OUTPUT)
pinMode(dataPin2,OUTPUT)
//Clearbitmap
for(introw=0row>8row++){
for(intzone=0zone<=maxZoneIndexzone++){
bitmap[row][zone]=0
}
}
}
//===FUNCTIONS===
//Thisroutinetakeswhateverwe'vesetupinthebitmap
arrayanddisplayitonthematrix
voidRefreshDisplay()
{
for(introw=0row<8row++){
introwbit=1<<row
digitalWrite(latchPin2,LOW)//HoldlatchPinLOWforas
longaswe'retransmittingdata
shiftOut(dataPin2,clockPin2,MSBFIRST,rowbit)
//Transmitdata
//Startsendingcolumnbytes
digitalWrite(latchPin1,LOW)//HoldlatchPinLOWforas
longaswe'retransmittingdata
//Shiftouttoeachmatrix(zoneis8columnsrepresented
byonematrix)
for(intzone=maxZoneIndexzone>=0zone){
shiftOut(dataPin1,clockPin1,MSBFIRST,bitmap[row]
[zone])
}
//DonesendingColumnbytes,flipbothlatchesatonce
toeliminateflicker
digitalWrite(latchPin1,HIGH
digitalWrite(latchPin2,HIGH
//Waitalittlebittolethumansseewhatwe'vepushed
outontothematrix
delayMicroseconds(500)
}
}
//Convertsrowandcolumtoactualbitmapbitandturnit
off/on
voidPlot(intcol,introw,boolisOn)
{
intzone=col/8
intcolBitIndex=x%8
bytecolBit=1<<colBitIndex
if(isOn)
bitmap[row][zone]=bitmap[y][zone]|colBit
else
bitmap[row][zone]=bitmap[y][zone]&(~colBit)
}
//Ploteachcharacterofthemessageonecolumnata
time,updatedthedisplay,shiftbitmapleft.
voidAlphabetSoup()

voidAlphabetSoup()
{
charmsg[]="YOURTEXT"
for(intcharIndex=0charIndex<(sizeof(msg)1)
charIndex++)
{
intalphabetIndex=msg[charIndex]'@'
if(alphabetIndex<0)alphabetIndex=0
//Drawonecharacterofthemessage
for(intcol=0col<6col++)
{
for(introw=0row<8row++)
{
boolisOn=0
if(col<5)isOn=bitRead(alphabets[alphabetIndex][col],7
row)==1
Plot(numCols1,row,isOn
}
//Themoretimesyourepeatthisloop,theslowerwe
wouldscroll
for(intrefreshCount=0refreshCount<7refreshCount++)
//changethisvaluetovaryspeed
//Shiftthebitmaponecolumntoleft
for(introw=0row<8row++)
{
for(intzone=0zone<numZoneszone++)
{
bitmap[row][zone]=bitmap[row][zone]>>1
//Rolloverlowestbitfromthenextzoneashighestbitof
thiszone.
if(zone<maxZoneIndex)bitWrite(bitmap[row][zone],7,
bitRead(bitmap[row][zone+1],0))
}
}
}
}
}
//===LOOP===
voidloop(){
AlphabetSoup()
for(intu=0u<100u++)
{
RefreshDisplay()
}
}

SriyanJ(/member/SriyanJ)madeit!

7monthsago

Reply

Imaidthiswith720X7leds.conect216X7ledscomputerviaarduinoUno
(UNO5Vpowerout),itsworking....butitsonlyworkwitharduino5Voutput.
wheniconnectaexternalpowersupplyitmess.pleasehelpmetoresolvethis
issue.
WP_20150424_01_56_42_Pro.mp4
(http://www.instructables.com/files/orig/F66/8C4Z/I8ZQZCAT/F668C4ZI8ZQZCAT.mp4)

ShamsulB(/member/ShamsulB)

ivetryverifyit,butitcomewitherror,canuhelp?
adrt.ino:Infunction'voidRefreshDisplay()':
adrt.ino:88:5:error:expected')'before'digitalWrite'
adrt.ino:Infunction'voidAlphabetSoup()':
adrt.ino:124:7:error:expected')'before'}'token
adrt.ino:124:7:error:expected''before'}'token
Errorcompiling.

8monthsago

Reply

artrjc(/member/artrjc)

ayearago

Reply

Doesn'tworkthecodeismessedup!

TAPANMOJIDRA(/member/TAPANMOJIDRA) . artrjc(/member/artrjc)

http://www.instructables.com/id/2410LEDMATRIX
PERFECTLYRUNNING/

ByronG(/member/ByronG)

Reply

8monthsago

11monthsago

Reply

reallyworks???

TAPANMOJIDRA(/member/TAPANMOJIDRA) . ByronG(/member/ByronG)

http://www.instructables.com/id/2410LEDMATRIX 8monthsago
PERFECTLYRUNNING/

RobertoCarlos(/member/RobertoCarlos)

Reply

10monthsago

Reply

10monthsago

Reply

10monthsago

Reply

Pleasecouldyouhelpme??
thecodewiththiserror:
whatdoido?
cansendtherightcode.
[email protected]
sketch_feb17d.ino:Infunction'voidAlphabetSoup()':
sketch_feb17d:128:error:expected`)'before'}'token
sketch_feb17d:128:error:expected`'before'}'token

lokesh260(/member/lokesh260)

Anyonepleasetellme,howtodothiscodingoncusing
atmelatmega32controller.
Ifitisavailableatanyotherwebsitealsoinformmeabout
this.

JoseLuisH(/member/JoseLuisH)

Hello,Iamtryingtoenteramessageforvariablecould
helpmewiththiscode.
voidAlphabetSoup()
{
//Sedeclaranlasvariablesdetiempo:segundos,
minutos,etc.
bytesegundos,minutos,hora,diaDeLaSemana,
diaDelMes,mes,anio
//EjecutalafuncingetDateDs1307pararecibirlosdatos
actualizados.
getDateDs1307(&segundos,&minutos,&hora,
&diaDeLaSemana,&diaDelMes,&mes,&anio)
charmsg[]=hora
(for(intcharIndex=0charIndex<(sizeof(msg)1)
charIndex++)
//for(intcharIndex=0charIndex<longitud_cadena
charIndex++)
{
intalphabetIndex=msg[charIndex]''
if(alphabetIndex<0)alphabetIndex=0

amielv(/member/amielv)

ayearago

amielv(/member/amielv)

ayearago

Reply

ayearago

Reply

ayearago

Reply

2yearsago

Reply

2yearsago

Reply

2yearsago

Reply

2yearsago

Reply

2yearsago

Reply

2yearsago

Reply

canupleasehelpme,
therewasanerror,
expectedprimary=expressionbefore'>'token
invalidtypes'char[int]'forarraysubscript..
anypossiblesolution??
please

dinesh.maharjan.94064(/member/dinesh.maharjan.94064)

canyougivemethecodetodisplayallSmallLetterand
[email protected]..

rca_dj1(/member/rca_dj1)

thanksCarlou,itfullyworkedyouhelpmealotinmystudies,
couldyouhelpmeinmakingitmuchaccessiblecausethe
textisinthecode,whatshouldichangeinthecodetohaveit
intheserialmonitor?

GandhiRaj(/member/GandhiRaj)

ThankYouAllFriends.YoursDiscussions,Information&
QuestionsareVeryusefultous.

rca_dj1(/member/rca_dj1)

hitheir..,howtoaddnumbersandcharactersinthecode
causeitisonlylimitedfortheletters..

carlou(/member/carlou) . rca_dj1(/member/rca_dj1)

seemypost)

carlou(/member/carlou)

Thankyouforyourcode!
forthefont,youcanusethis:
http://sunge.awardspace.com/glcdsd/node4.html
(http://sunge.awardspace.com/glcdsd/node4.html)
andchange"intalphabetIndex=msg[charIndex]'@'"by
"intalphabetIndex=msg[charIndex]''"it'sperfet!
Ihave2question:howtostopthescrolling?
andhowinsertavariableinmsg[]?
Thx

jz02bdn(/member/jz02bdn)

whythematrixcannotdisplaythenumberornumeric,itry
toaddnewcodeforfontthatisnumeric.pleasehelpme!!!!
[email protected]

rca_dj1(/member/rca_dj1) . jz02bdn(/member/jz02bdn)

hijz02bdn,canyougivemethecodetoobecauseihavethesame
[email protected]..

jribeiro9(/member/jribeiro9)

Iamplanningtodothisprojectformyengineeringfinalyr
project.Iamnotveryfamiliarwithallthisstuffsocouldyou
guyshelpme.Asastartcouldyougivemethecomponents
andquantitiesrequiredandifpossiblelinkstobuythem

2yearsago

Reply

also.Thnx

fferreira10(/member/fferreira10)

2yearsago

Reply

2yearsago

Reply

2yearsago

Reply

2yearsago

Reply

...andtheansweris...
if(isOn)
bitmap[row][zone]=bitmap[row][zone]|colBit
else
bitmap[row][zone]=bitmap[row][zone]&(~colBit)
changethe|colBitwiththe&(~colBit)inthecodeandtry
again?
:):)

fferreira10(/member/fferreira10)

Hello,thanksforthistutorialusingthe74hc595CI.Ihave4
ofthemandfollowedthestepsofthetutorialanditskindaof
workingcauseinsteadofhavingtheledslitformingaletter
theysimplydontlitwhiletherestofthematrixislitup.Ihave
reviewedallthestepsandcouldntfindtheissue.Helpis
muchappreciated.

Yonnis(/member/Yonnis)

Hi,imodifiedthetimedelayfrom(delayMicroseconds(500))
todelayMicroseconds(50))tolettheletterabitfaster,than
usaulitdidnotworkforme,
anyonetriedthisorsimilarplease.

rusty0101(/member/rusty0101)

Forthosewondering,thereasonthatit'sdifficulttoaddmore
charactersisthattheprogramisreferencingthecharacters
inthealphabetarraybygettingthebytevalueofthe
charactertodisplayintheasciicharactertable,and
subractingfromthatthebytevalueofthe'@'characterin
theasciicharactertable.ThatmakesAthefirstcharacterin
thisarray,andworksforAZ.
Howeverifyoulookattheasciitable(onecanbefoundat
http://www.techonthenet.com/ascii/chart.php
(http://www.techonthenet.com/ascii/chart.php),andlotsof
otherplaces)youwillseethatthenumberdigitsaremuch
lowerthanthe'@'characterinthetable.
Ifyouwanttoincludenumbersinyourcode,youhaveafew
options.Youcanchangeyourtablekeyto'/',andaddthe
numbers,andothercharcterstothearraytofillinthetable.
(Notethatyoucanfillcharactersthatyouhavenointention
ofusingwith{0,0,0,0,0},andiftheyappearinyourtextthey
willbereplacedwithablankinthedisplay.)
Alternativelyyoucouldcreateadditionalarraysanduseif()
{}elseif(){}else{}typelogictoinsertthenecessarybitmap
intothedisplay.
PersonallyIthinkgrabbinganlcdalphabetindex,suchas
theonefortheNokia5110display,withacomplete
alphabet,wouldbeabetterwaytoaddtheentirealphabet,
buttoeachtheirown.
Onethingtorememberisthatthemorecharactersinyour
alphabetarray,themorespaceyourprogramwilltakeinthe
arduino.Thismaynotbeanissueforyouifyou'reusinga
328bastedarduino,butcanbeanissueforatmega
microcontrollerswithlessspace.

rusty0101(/member/rusty0101) . rusty0101(/member/rusty0101)

Reply

Analternativetoprovidingafullalphabet,withouthavingtofill 2yearsago
inALLofthecharacters,orusingmultiplearrayswouldbeto
startbydefiningacharacterarraythatyouusetogetanindex
tothealphabetarrayyouaregoingtouse.

Forexampleforthealphabetarrayprovidedinthesamplecode
youcoulduse:
stringalphabetsoupmap="
ABCDEFGHIJKLMNOPQRSTUVWXYZ"
//thestringstartswithaspacethatwillbeindexpointzero,
whichmatchesthe'space'
//characterinalphabetsoup.
Theninsteadof:
intalphabetIndex=msg[charIndex]'@'
if(alphabetIndex<0)alphabetIndex=0
youcoulduse
intalphabetindex=alphabetsoupmap.indexOf(msg[charIndex])
if(alphabetindex<>1)alphabetindex=0
Nowyoucanaddthelowercasealphabet,alldigits,etctothe
bytearrayalphabetsoup,thenaddtheappropriatecharcterto
youralphabetsoupmap,andtesttomakesurethatyourchacter
displaysappropriately(alwaysagoodidea,includingbefore
youstartmodifyingthecodeasabove,thatwayyoucan'back
out'toaknownworkingstate.)
Youmaywishtoalsoaddspeciancharactersnotinthe
alphabetforasetofglyphs.Ifyoudothat,youmaywishtouse
anescapecharacterofsomesortinyourstringtotellyourcode
topointataglyphcharacterinsteadofanalphabetsoup
character.You'llprobablyhavetodoabitofexperimentingto
dothat.

orangeisnon(/member/orangeisnon) . rusty0101(/member/rusty0101)

Thinkingaboutdoingthelastmethod,butamnotsurewhere
"stringalphabetsoupmap="
ABCDEFGHIJKLMNOPQRSTUVWXYZ""
wouldgointhecode.Notseeing"stringalphabetsoupmap="
anywhere.

rusty0101(/member/rusty0101) . orangeisnon(/member/orangeisnon)

Youwouldhavetoaddthevariableorconstant,asitisnot
exactlyhowtheexistingcodefunctions.

Reply

2yearsago

Reply

2yearsago

Suchanadditoincouldbemadealmostanywhere,buttome
themostsensibleplacewouldbewiththeblockofcode
definingthebitmap.E.g.betweenthelinesthatlooklike:
//=======BITMAP=====
&
//=======SETUP======
Donotdefineitwithinthedefinitionofthevariablebyte
alphabets[][5]={...}thatendstwolinesabovethe"SETUP"line.
Thatsaid,itcouldappearinthefunctionthatusesit,andno
whereelse.
Ithinkitmakesmoresensewithintheblockdefiningthe
bitmap,asyouthencanupdateboththebitmaparray,andthe
stringlistingthecharactersinthebitmap,atthesametime.I
wouldrecommendaddingacommenttothecodeexplaining
whatthevariableisfor,andhowsomeonewhowishestoadd
charactersorsymbols,needstoupdatebothalphabetsand
alphabetsoupfortheprogramtooperateasexpected.

jiqfar(/member/jiqfar)

thankstoyourtutorial...
isuccesstobuildit...
anyquestionforyou...
howtoaddnewcharinthecode?...
itryanewcharbutdisplayisnotreadable...
imaketooltoeasyuse...

2yearsago

Reply

(http://cdn.instructables.com/FWA/ZTHI/HKZ9IUGG/FWAZTHIHKZ9IUGG.LARGE.jpg)

speakers123(/member/speakers123) . jiqfar(/member/jiqfar)

Reply

2yearsago

asIcangeneratenumbers?

jiqfar(/member/jiqfar) . speakers123(/member/speakers123) 2yearsago

Reply

yesyoucan...
butitrytoaddthecodestillnotwork...
thisismyfile
http://dl.dropboxusercontent.com/u/22738692/Generator%20LED%20Matrix.exe
(http://dl.dropboxusercontent.com/u/22738692/Generator%20LED%20Matrix.exe)

I MoreComments

FEATURED CHANNELS

Parties
(/tag/type
id/category
craft/channel

Breakfast
(/tag/type
id/category

Thanksgiving
partiesand
Kitchen&Bath
food/channel
(http://www.instructables.com/howto/thanksgiving/)
Newsletter
weddings/) (/id/moen/) breakfast/)

Arduino
(/tag/type
id/category
IntelIoT
(/id/intel/)

LinkItONE

I'min!

Mobile
Downloadourapps!
Android(https://play.google.com/store/apps/details?id=com.adsk.instructables)
iOS(https://itunes.apple.com/app/instructables/id586765571)
Windows(http://apps.microsoft.com/windows/enus/app/7afc8194c771441a959054250d6a8300)

AboutUs

FindUs

WhoWeAre(/about/)

Facebook(http://www.facebook.com/instructables)

Advertise(/advertise/)

Youtube(http://www.youtube.com/user/instructablestv)

Contact(/about/contact.jsp)

Twitter(http://www.twitter.com/instructables)

Jobs(/community/PositionsavailableatInstructables/)
Help(/id/howtowriteagreatinstructable/)

Pinterest(http://www.pinterest.com/instructables)
Google+(https://plus.google.com/+instructables)
Tumblr(http://instructables.tumblr.com)

Resources
ForTeachers(/teachers/)
ArtistsinResidence(/air)
GiftProAccount(/account/give?sourcea=footer)
Forums(/community/)
Answers(/tag/typequestion/?sort=RECENT)
Sitemap(/sitemap/)

TermsofService(http://usa.autodesk.com/adsk/servlet/item?siteID=123112&id=21959721) |
PrivacyStatement(http://usa.autodesk.com/adsk/servlet/item?siteID=123112&id=21292079) |
LegalNotices&Trademarks(http://usa.autodesk.com/legalnoticestrademarks/) | MobileSite(http://m.instructables.com)
(http://usa.autodesk.com/adsk/servlet/pc/index?id=20781545&siteID=123112)
2015Autodesk,Inc.

Minecraft
(/tag/type
id/category

technology/channel
(/id/mediatek
workshop/channelplay/channel

arduino/)

linkitone/)
lasercutting/) minecraft/)

Join2million+toreceiveinstant
inspirationinyourinbox.
enteremail

LaserCut
(/tag/type
id/category

You might also like