Scribd
Upload
50 views25 pages

CLSS MOdbus KCS

The document provides instructions for activating and configuring the Modbus service on the CLSS Gateway, including steps for feature activation through the CLSS Mobile App and web configuration. It highlights the need for a unique Ownership Code, the use of a static IP address, and the importance of using Google Chrome for setup. Additionally, it outlines the process for changing the gateway password and verifying successful connections through LED indicators.

Uploaded by

srbhve
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views25 pages

CLSS MOdbus KCS

The document provides instructions for activating and configuring the Modbus service on the CLSS Gateway, including steps for feature activation through the CLSS Mobile App and web configuration. It highlights the need for a unique Ownership Code, the use of a static IP address, and the importance of using Google Chrome for setup. Additionally, it outlines the process for changing the gateway password and verifying successful connections through LED indicators.

Uploaded by

srbhve
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

CLSS Modbus License

CLSS GW
CLSS Gateway 3.1.4.74
OC (Ownership Code) unique to CLSS GW

1.

2.
To Activate the Modbus Service
Go to CLSS Mobile App and
select …
Perform Feature Activation
1.
Select Fixed Gateways

1.
Select the site
where the
gateway is
installed
1. 2.
Verify the
OC of the
CLSS
Gateway
2. 3.

OC – Ownership Code 1.
Add Activation
Select the
Modbus Service
And
1.
Activate 2.

3.
Modbus Service
Confirm

1.
Pair Device

1.
Successful
Feature
Activation
CLSS Modbus Setup
CLSS GW
To configure the Modbus Setting

S6 button –
1.
Press and hold for 6 sec

2. DL3 LED Steady Green - in Web Configuration Mode Enable


CLSS GW in
Webserver
Enable
mode
2. After 15 Minutes
1.
Auto Logout
Webserver
Disable
System Architecture
The latest
Google Chrome
must be used to 1.

configure the IP address


192.168.10.121
3.

Setup of the
CLSS Modbus
GW

2.
The CLSS Gateway does not response to Ping
command due to Cybersecurity Restriction
Enter the following into Chrome
https://192.168.10.190:9443/config/index.html

1. Welcome123
Change Password

1. Welcome123

2. welcome123

3. welcome123
Gateway
Setting

1.
Modbus Setting

2.

1.

3.
Network
Setting 1.
2.

Modbus 3.

GW only 4.

works on
Static IP
address

5.
The CLSS Modbus
GW is configured
with Static Ip 1.
IP address 3.
address of CLSS GW Modbus
IP address
192.168.1.121

192.168.2.66 and 192.168.1.66

will be 2.

Connected the
Modbus Client via
Ethernet Port 1 with
IP address
192.168.1.121
Modscan 32
Client 1.
2.
Modbus Scanner
If All connection are OK –
LED DL3 (Panel), DL4 (Cloud) and DL5 (Wifi)

;Blink once in a
2 seconds

You might also like