matplotlib-users Mailing List for matplotlib

Hi,

--- On Tue, Sep 29, 2015 at 11:59 PM, Benjamin Root
<ben...@gm...> wrote:
| You have some logic issues here. First off, I wouldn't be updating the plot
| in the same function that is updating the data values. Assuming that
| "loop_start()" is asynchronous, the update frequency for it is likely to be
| entirely different from the Animation update frequency. So, just have that
| function do updates.
\--

Okay.

---
| You should also declare x, y, and z as globals in that
| function so that the reassignment of those arrays persist properly.
\--

Done.

---
| Your list comprehension prior to concatenating uses a variable "x", which is
| likely causing the current error that you see. Change that name to something
| else.
\--

Done.

---
| Lastly, I implore you to use "set_data()" like in the original example,
| rather than calling plot() repeatedly.
\--

This is how the code looks like now:

=== BEGIN ===

import matplotlib as mpl
from mpl_toolkits.mplot3d import Axes3D
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.animation as animation
import sys
import paho.mqtt.client as mqtt
import itertools

def update_line(num, dataLines, lines):
    for line, data in zip(itertools.repeat(lines, len(dataLines)), dataLines):
        line.set_data(data[0:2, :num])                           #
IndexError too many indices
        line.set_3d_properties(data[2, :num])
    return lines

def on_connect(client, userdata, flags, rc):
    print("Connected with result code "+str(rc))
    client.subscribe("hello/world")

def on_message(client, userdata, msg):
    global x, y, z
    data = msg.payload
    print(msg.topic+" "+str(msg.payload))
    point = np.asarray([float(element) for element in data.split()])
    print point
    x=np.concatenate((x,[point[0]]))
    y=np.concatenate((y,[point[1]]))
    z=np.concatenate((z,[point[2]]))

fig = plt.figure()
ax = fig.gca(projection='3d')
ax.set_xlabel('X')
ax.set_ylabel('Y')
ax.set_zlabel('Z')

x = np.array([1.0, 2.0, 3.0])
y = np.array([4.0, 7.0, 8.0])
z = np.array([6.0, 9.0, 5.0])
data = [x, y, z]

lines, = ax.plot(x, y, z, label='Line')
ax.legend()

client = mqtt.Client()
client.on_connect = on_connect
client.on_message = on_message
client.connect_async("localhost", 1883, 60)
client.loop_start()

line_ani = animation.FuncAnimation(fig, update_line, 25, fargs=(data,
lines), interval=2000, blit=True)

plt.show()

=== END ===

So, the error now is in line.set_data where it says there are too many
indices. If I remove :num, in both line.set_data and
line.set_3d_properties, it tells me that 'TypeError': 'Line3D' is not
iterable.

Thanks for patiently answering my queries.

SK

-- 
Shakthi Kannan
http://www.shakthimaan.com

Sorry for bother, not sure if this goes through or not.

I had a plot with hatch in it. But the default linewidth for hatch makes it
really hard to see in my current figure layout/scale, so I would like to
increases the hatch linewidth;

plt.bar(ind, s1[:,3],width, color='0.85', edgecolor='black',
linewidth=[0.5],hatch='-----//////')

The linewidth there can only change the width of the edge, but not the
hatch width;


I did several google searches with no solution. But I indeed noticed that
several years ago (back to year 2011), this is impossible as the hatch
linewidth is hard coded as:

hatch_path_stroke.width(1.0);


But is this implemented so that I can change the hatch linewidth?

Best regards

Luis

You have some logic issues here. First off, I wouldn't be updating the plot
in the same function that is updating the data values. Assuming that
"loop_start()" is asynchronous, the update frequency for it is likely to be
entirely different from the Animation update frequency. So, just have that
function do updates. You should also declare x, y, and z as globals in that
function so that the reassignment of those arrays persist properly.


Your list comprehension prior to concatenating uses a variable "x", which
is likely causing the current error that you see. Change that name to
something else.

Lastly, I implore you to use "set_data()" like in the original example,
rather than calling plot() repeatedly.

Cheers!
Ben Root


On Tue, Sep 29, 2015 at 2:05 PM, Shakthi Kannan <sha...@gm...>
wrote:

> Hi,
>
> I was able to get past the error, and I am now trying to add a
> callback to receive values from a queue, add it to the existing poly
> line, and render the same using matplotlib. The code snippet is shown
> below:
>
> === BEGIN ===
>
> import matplotlib as mpl
> from mpl_toolkits.mplot3d import Axes3D
> import numpy as np
> import matplotlib.pyplot as plt
> import matplotlib.animation as animation
> import sys
> import paho.mqtt.client as mqtt
>
> def update_line(num, x, y, z, l):
>     print x, y, z
>     l, = ax.plot(x, y, z, label='Line')
>     return l,
>
> def on_connect(client, userdata, flags, rc):
>     print("Connected with result code "+str(rc))
>     client.subscribe("hello/world")
>
> def on_message(client, userdata, msg):
>     data = msg.payload
>     print(msg.topic+" "+str(msg.payload))
>     point = np.asarray([float(x) for x in data.split()])
>     print point
>     x=np.concatenate((x,[point[0]]))
>     y=np.concatenate((y,[point[1]]))
>     z=np.concatenate((z,[point[2]]))
>     l, = ax.plot(x, y, z, label='Line')
>     return l,
>
> fig = plt.figure()
> ax = fig.gca(projection='3d')
> ax.set_xlabel('X')
> ax.set_ylabel('Y')
> ax.set_zlabel('Z')
>
> x = np.array([1.0, 2.0, 3.0])
> print type(x)
> y = np.array([4.0, 7.0, 8.0])
> z = np.array([6.0, 9.0, 5.0])
>
> l, = ax.plot(x, y, z, label='Line')
> ax.legend()
>
> client = mqtt.Client()
> client.on_connect = on_connect
> client.on_message = on_message
> client.connect_async("localhost", 1883, 60)
> client.loop_start()
>
> line_ani = animation.FuncAnimation(fig, update_line, 25, fargs=(x, y,
> z, l), interval=2000, blit=True)
>
> plt.show()
>
> === END ===
>
> I now hit the following error:
>
> === ERROR ===
>
>  $ python mat-3.py
> <type 'numpy.ndarray'>
> [ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
>  Connected with result code 0
> [ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
> [ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
> [ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
> hello/world 34.56 15.912 0.72
> [ 34.56   15.912   0.72 ]
> Exception in thread Thread-1:
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner
>     self.run()
>   File "/usr/lib/python2.7/threading.py", line 763, in run
>     self.__target(*self.__args, **self.__kwargs)
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 2287, in _thread_main
>     self.loop_forever()
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 1261, in loop_forever
>     rc = self.loop(timeout, max_packets)
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 811, in loop
>     rc = self.loop_read(max_packets)
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 1073, in loop_read
>     rc = self._packet_read()
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 1475, in _packet_read
>     rc = self._packet_handle()
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 1943, in _packet_handle
>     return self._handle_publish()
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 2118, in _handle_publish
>     self._handle_on_message(message)
>   File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
> line 2274, in _handle_on_message
>     self.on_message(self, self._userdata, message)
>   File "mat-3.py", line 23, in on_message
>     x=np.concatenate((x,[point[0]]))
> ValueError: zero-dimensional arrays cannot be concatenated
>
> [ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
> [ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
> [ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
>
> ...
>
> === END ===
>
> Is there a better way to re-render the plot after receiving data?
>
> Thanks!
>
> SK
>
> --
> Shakthi Kannan
> http://www.shakthimaan.com
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Hi,

I was able to get past the error, and I am now trying to add a
callback to receive values from a queue, add it to the existing poly
line, and render the same using matplotlib. The code snippet is shown
below:

=== BEGIN ===

import matplotlib as mpl
from mpl_toolkits.mplot3d import Axes3D
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.animation as animation
import sys
import paho.mqtt.client as mqtt

def update_line(num, x, y, z, l):
    print x, y, z
    l, = ax.plot(x, y, z, label='Line')
    return l,

def on_connect(client, userdata, flags, rc):
    print("Connected with result code "+str(rc))
    client.subscribe("hello/world")

def on_message(client, userdata, msg):
    data = msg.payload
    print(msg.topic+" "+str(msg.payload))
    point = np.asarray([float(x) for x in data.split()])
    print point
    x=np.concatenate((x,[point[0]]))
    y=np.concatenate((y,[point[1]]))
    z=np.concatenate((z,[point[2]]))
    l, = ax.plot(x, y, z, label='Line')
    return l,

fig = plt.figure()
ax = fig.gca(projection='3d')
ax.set_xlabel('X')
ax.set_ylabel('Y')
ax.set_zlabel('Z')

x = np.array([1.0, 2.0, 3.0])
print type(x)
y = np.array([4.0, 7.0, 8.0])
z = np.array([6.0, 9.0, 5.0])

l, = ax.plot(x, y, z, label='Line')
ax.legend()

client = mqtt.Client()
client.on_connect = on_connect
client.on_message = on_message
client.connect_async("localhost", 1883, 60)
client.loop_start()

line_ani = animation.FuncAnimation(fig, update_line, 25, fargs=(x, y,
z, l), interval=2000, blit=True)

plt.show()

=== END ===

I now hit the following error:

=== ERROR ===

 $ python mat-3.py
<type 'numpy.ndarray'>
[ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
 Connected with result code 0
[ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
[ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
[ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
hello/world 34.56 15.912 0.72
[ 34.56   15.912   0.72 ]
Exception in thread Thread-1:
Traceback (most recent call last):
  File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner
    self.run()
  File "/usr/lib/python2.7/threading.py", line 763, in run
    self.__target(*self.__args, **self.__kwargs)
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 2287, in _thread_main
    self.loop_forever()
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 1261, in loop_forever
    rc = self.loop(timeout, max_packets)
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 811, in loop
    rc = self.loop_read(max_packets)
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 1073, in loop_read
    rc = self._packet_read()
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 1475, in _packet_read
    rc = self._packet_handle()
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 1943, in _packet_handle
    return self._handle_publish()
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 2118, in _handle_publish
    self._handle_on_message(message)
  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py",
line 2274, in _handle_on_message
    self.on_message(self, self._userdata, message)
  File "mat-3.py", line 23, in on_message
    x=np.concatenate((x,[point[0]]))
ValueError: zero-dimensional arrays cannot be concatenated

[ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
[ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]
[ 1.  2.  3.] [ 4.  7.  8.] [ 6.  9.  5.]

...

=== END ===

Is there a better way to re-render the plot after receiving data?

Thanks!

SK

-- 
Shakthi Kannan
http://www.shakthimaan.com

Thanks in advance but Sorry to bother those who are not interested.

I had a plot with hatch in it. But the default linewidth for hatch makes it
really hard to see in my current figure layout/scale, so I would like to
increases the hatch linewidth;

plt.bar(ind, s1[:,3],width, color='0.85', edgecolor='black',
linewidth=[0.5],hatch='-----//////')

The linewidth there can only change the width of the edge, but not the
hatch width;


I did several google searches with no solution. But I indeed noticed that
several years ago (back to year 2011), this is impossible as the hatch
linewidth is hard coded as:

hatch_path_stroke.width(1.0);


But is this implemented so that I can change the hatch linewidth?

Best regards

Luis

On 2015/09/28 5:43 AM, Benjamin Root wrote:
> Confirmed using a fairly recent matplotlib checkout. Could you file a
> bug report? This is going to need some investigating.

Line3D.set_3d_properties is not doing anything to turn zs into an 
ndarray; in fact, when zs is a scalar, it is turning it into a list.  I 
suspect this is the place to make it an array.  Probably better here 
than anywhere farther down.  It also looks to me like Line3D.__init__ 
should be using self.set_3d_properties.

Dear Pythonistas,

We have just released a new version of the "scipy lecture notes":
http://www.scipy-lectures.org/

These are a consistent set of materials to learn the core aspects of the
scientific Python ecosystem, from beginner to expert. They are written
and maintained by a set of volunteers and published under a CC-BY
license.

Highlights of the latest version includes:

 * a chapter giving a introduction to statistics in Python
 * a new layout with emphasis on readability including on small devices
 * fully doctesting for Python 2 and 3 compatibility

We hope that you will find these notes useful, for you, your colleagues,
or your students.

Gaël

On 28/09/15 22:25, Jerzy Karczmarczuk wrote:
> 
> Le 28/09/2015 21:03, Benjamin Root a écrit :
>> Where does he multiply a list by a float? The traceback shows the 
>> multiplication happening much further down in the draw stack.
> 
> Look, Benjamin Root, I don't know, and I will not "investigate" where 
> this operation happens. The diagnosis is a standard Python message. 
> Thus, I took the program of Shakhti Kannan, and in a few seconds I changed
> 
> 
> x = [1.0, 2.0, 3.0]     into      x = np.array([1.0, 2.0, 3.0])
> 
> and in update_line:   x.append(1.0)   into x=np.concatenate((x,[1.0]))
> 
> And the program began to run without error messages. So, please, these 
> are FACTS: somewhere the lists x,y,z get down in this draw stack.

No one is doubting that.

>> That shouldn't matter. ax.plot() accepts lists as valid inputs and it 
>> should be converting them into numpy arrays under the hood.
> 
> There are two different issues, accepting any sequences/iterators is 
> one, converting them into arrays - another one. This second operation 
> visibly doesn't take place.

And this is a bug in matplotlib that needs to be fixed. Your solution is
just a workaround to an existing problem in matplotlib.

Cheers,
Daniele

Jerzy,

On Mon, Sep 28, 2015 at 4:25 PM, Jerzy Karczmarczuk <
jer...@un...> wrote:

>
> Le 28/09/2015 21:03, Benjamin Root a écrit :
>
>> Where does he multiply a list by a float? The traceback shows the
>> multiplication happening much further down in the draw stack.
>>
>
> Look, Benjamin Root, I don't know, and I will not "investigate" where this
> operation happens.


I did not ask you to investigate anything for me. You made the assertion
that the user was multiplying a list by a float, therefore, I assumed that
you were seeing something that I had not seen.


> The diagnosis is a standard Python message. Thus, I took the program of
> Shakhti Kannan, and in a few seconds I changed
>
>
> x = [1.0, 2.0, 3.0]     into      x = np.array([1.0, 2.0, 3.0])
>
> and in update_line:   x.append(1.0)   into x=np.concatenate((x,[1.0]))
>
> And the program began to run without error messages. So, please, these are
> FACTS: somewhere the lists x,y,z get down in this draw stack.
>
>
I realize that, and that isn't in dispute. Nowhere did I say that
converting the lists into numpy arrays would not solve the problem.


> That shouldn't matter. ax.plot() accepts lists as valid inputs and it
>> should be converting them into numpy arrays under the hood.
>>
>
> There are two different issues, accepting any sequences/iterators is one,
> converting them into arrays - another one. This second operation visibly
> doesn't take place.
>
>
Of course the second operation isn't visible. I did say that it happens
"under the hood". His program is perfectly valid (albeit not ideal) and
demonstrated a bug in matplotlib's codebase. That is why I asked him to
file a bug report. My reading of your email is that you are upset for some
reason, but I have no clue why.

Ben Root

Le 28/09/2015 21:03, Benjamin Root a écrit :
> Where does he multiply a list by a float? The traceback shows the 
> multiplication happening much further down in the draw stack.

Look, Benjamin Root, I don't know, and I will not "investigate" where 
this operation happens. The diagnosis is a standard Python message. 
Thus, I took the program of Shakhti Kannan, and in a few seconds I changed


x = [1.0, 2.0, 3.0]     into      x = np.array([1.0, 2.0, 3.0])

and in update_line:   x.append(1.0)   into x=np.concatenate((x,[1.0]))

And the program began to run without error messages. So, please, these 
are FACTS: somewhere the lists x,y,z get down in this draw stack.

> That shouldn't matter. ax.plot() accepts lists as valid inputs and it 
> should be converting them into numpy arrays under the hood.

There are two different issues, accepting any sequences/iterators is 
one, converting them into arrays - another one. This second operation 
visibly doesn't take place.



J. Karczmarczuk

On Mon, Sep 28, 2015 at 2:28 PM, Jerzy Karczmarczuk <
jer...@un...> wrote:

> Shakhti Kannan tries to multiply a list by a float, and Python disagrees.
>
>
Where does he multiply a list by a float? The traceback shows the
multiplication happening much further down in the draw stack.


> Le 28/09/2015 17:43, Benjamin Root comments :
> > Could you file a bug report? This is going to need some investigating.
>
> ==
>
> I suspect that it can be solved without Hercule Poirot.
> Convert *at the beginning* your lists x,y,z into np.arrays.
> (also: append  ==>  concatenate)
>

That shouldn't matter. ax.plot() accepts lists as valid inputs and it
should be converting them into numpy arrays under the hood. Indeed, if one
takes out the animation creation, the code works just fine. Adding new
plots(), while inefficient, shouldn't cause this problem.

Ben Root

Shakhti Kannan tries to multiply a list by a float, and Python disagrees.

Le 28/09/2015 17:43, Benjamin Root comments :
> Could you file a bug report? This is going to need some investigating.

==

I suspect that it can be solved without Hercule Poirot.
Convert *at the beginning* your lists x,y,z into np.arrays.
(also: append  ==>  concatenate)

Jerzy Karczmarczuk
/Caen, France/.

Confirmed using a fairly recent matplotlib checkout. Could you file a bug
report? This is going to need some investigating.

As a side note though, the way you are updating the lines by calling
`ax.plot` repeatedly, is bad form. You want to update the lines object
itself, by calling its "set_data()" method. Also, move the call to
`ax.legend()` to after calling `ax.plot` to avoid the warnings about
unlabeled plotting objects.

On Sat, Sep 26, 2015 at 3:46 AM, Shakthi Kannan <sha...@gm...>
wrote:

> Hi,
>
> I am trying to create poly lines using matplotlib and animation. My
> code snippet is as follows:
>
> === BEGIN ===
>
> import matplotlib as mpl
> from mpl_toolkits.mplot3d import Axes3D
> import numpy as np
> import matplotlib.pyplot as plt
> import matplotlib.animation as animation
>
> def update_line(num, x, y, z, l):
>     x.append(1.0)
>     y.append (2.0)
>     z.append(3.0)
>     print x, y, z
>     l, = ax.plot(x, y, z, label='Line')
>     return l,
>
> fig = plt.figure()
> ax = fig.gca(projection='3d')
> ax.set_xlabel('X')
> ax.set_ylabel('Y')
> ax.set_zlabel('Z')
> ax.legend()
>
> x = [1.0, 2.0, 3.0]
> y = [4.0, 7.0, 8.0]
> z = [6.0, 9.0, 5.0]
>
> l, = ax.plot(x, y, z, label='Line')
>
> line_ani = animation.FuncAnimation(fig, update_line, 25, fargs=(x, y,
> z, l), interval=2000, blit=True)
>
> plt.show()
>
> === END ===
>
> The error that I get:
>
> === ERROR ===
>
> $ python mat-3.py
>
> /usr/lib/pymodules/python2.7/matplotlib/axes.py:4747: UserWarning: No
> labeled objects found. Use label='...' kwarg on individual plots.
>   warnings.warn("No labeled objects found. "
> [1.0, 2.0, 3.0, 1.0] [4.0, 7.0, 8.0, 2.0] [6.0, 9.0, 5.0, 3.0]
> Exception in Tkinter callback
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1535, in __call__
>     return self.func(*args)
>   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 586, in callit
>     func(*args)
>   File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
> line 363, in idle_draw
>     self.draw()
>   File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
> line 348, in draw
>     FigureCanvasAgg.draw(self)
>   File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_agg.py",
> line 451, in draw
>     self.figure.draw(self.renderer)
>   File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
> in draw_wrapper
>     draw(artist, renderer, *args, **kwargs)
>   File "/usr/lib/pymodules/python2.7/matplotlib/figure.py", line 1034, in
> draw
>     func(*args)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/axes3d.py",
> line 270, in draw
>     Axes.draw(self, renderer)
>   File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
> in draw_wrapper
>     draw(artist, renderer, *args, **kwargs)
>   File "/usr/lib/pymodules/python2.7/matplotlib/axes.py", line 2086, in
> draw
>     a.draw(renderer)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/art3d.py",
> line 117, in draw
>     xs, ys, zs = proj3d.proj_transform(xs3d, ys3d, zs3d, renderer.M)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
> line 194, in proj_transform
>     return proj_transform_vec(vec, M)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
> line 153, in proj_transform_vec
>     vecw = np.dot(M, vec)
> TypeError: can't multiply sequence by non-int of type 'float'
> [1.0, 2.0, 3.0, 1.0, 1.0] [4.0, 7.0, 8.0, 2.0, 2.0] [6.0, 9.0, 5.0, 3.0,
> 3.0]
> Exception in Tkinter callback
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1535, in __call__
>     return self.func(*args)
>   File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
> line 276, in resize
>     self.show()
>   File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
> line 348, in draw
>     FigureCanvasAgg.draw(self)
>   File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_agg.py",
> line 451, in draw
>     self.figure.draw(self.renderer)
>   File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
> in draw_wrapper
>     draw(artist, renderer, *args, **kwargs)
>   File "/usr/lib/pymodules/python2.7/matplotlib/figure.py", line 1034, in
> draw
>     func(*args)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/axes3d.py",
> line 270, in draw
>     Axes.draw(self, renderer)
>   File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
> in draw_wrapper
>     draw(artist, renderer, *args, **kwargs)
>   File "/usr/lib/pymodules/python2.7/matplotlib/axes.py", line 2086, in
> draw
>     a.draw(renderer)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/art3d.py",
> line 117, in draw
>     xs, ys, zs = proj3d.proj_transform(xs3d, ys3d, zs3d, renderer.M)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
> line 194, in proj_transform
>     return proj_transform_vec(vec, M)
>   File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
> line 153, in proj_transform_vec
>     vecw = np.dot(M, vec)
> TypeError: can't multiply sequence by non-int of type 'float'
>
> === END ===
>
> I am using the basic_example.py as a template.
>
> http://matplotlib.org/1.4.1/examples/animation/basic_example.html
>
> What could I be missing? Appreciate any help in this regard,
>
> Thanks!
>
> SK
>
> --
> Shakthi Kannan
> http://www.shakthimaan.com
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Hi,

I am trying to create poly lines using matplotlib and animation. My
code snippet is as follows:

=== BEGIN ===

import matplotlib as mpl
from mpl_toolkits.mplot3d import Axes3D
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.animation as animation

def update_line(num, x, y, z, l):
    x.append(1.0)
    y.append (2.0)
    z.append(3.0)
    print x, y, z
    l, = ax.plot(x, y, z, label='Line')
    return l,

fig = plt.figure()
ax = fig.gca(projection='3d')
ax.set_xlabel('X')
ax.set_ylabel('Y')
ax.set_zlabel('Z')
ax.legend()

x = [1.0, 2.0, 3.0]
y = [4.0, 7.0, 8.0]
z = [6.0, 9.0, 5.0]

l, = ax.plot(x, y, z, label='Line')

line_ani = animation.FuncAnimation(fig, update_line, 25, fargs=(x, y,
z, l), interval=2000, blit=True)

plt.show()

=== END ===

The error that I get:

=== ERROR ===

$ python mat-3.py

/usr/lib/pymodules/python2.7/matplotlib/axes.py:4747: UserWarning: No
labeled objects found. Use label='...' kwarg on individual plots.
  warnings.warn("No labeled objects found. "
[1.0, 2.0, 3.0, 1.0] [4.0, 7.0, 8.0, 2.0] [6.0, 9.0, 5.0, 3.0]
Exception in Tkinter callback
Traceback (most recent call last):
  File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1535, in __call__
    return self.func(*args)
  File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 586, in callit
    func(*args)
  File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
line 363, in idle_draw
    self.draw()
  File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
line 348, in draw
    FigureCanvasAgg.draw(self)
  File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_agg.py",
line 451, in draw
    self.figure.draw(self.renderer)
  File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
in draw_wrapper
    draw(artist, renderer, *args, **kwargs)
  File "/usr/lib/pymodules/python2.7/matplotlib/figure.py", line 1034, in draw
    func(*args)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/axes3d.py",
line 270, in draw
    Axes.draw(self, renderer)
  File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
in draw_wrapper
    draw(artist, renderer, *args, **kwargs)
  File "/usr/lib/pymodules/python2.7/matplotlib/axes.py", line 2086, in draw
    a.draw(renderer)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/art3d.py",
line 117, in draw
    xs, ys, zs = proj3d.proj_transform(xs3d, ys3d, zs3d, renderer.M)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
line 194, in proj_transform
    return proj_transform_vec(vec, M)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
line 153, in proj_transform_vec
    vecw = np.dot(M, vec)
TypeError: can't multiply sequence by non-int of type 'float'
[1.0, 2.0, 3.0, 1.0, 1.0] [4.0, 7.0, 8.0, 2.0, 2.0] [6.0, 9.0, 5.0, 3.0, 3.0]
Exception in Tkinter callback
Traceback (most recent call last):
  File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1535, in __call__
    return self.func(*args)
  File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
line 276, in resize
    self.show()
  File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py",
line 348, in draw
    FigureCanvasAgg.draw(self)
  File "/usr/lib/pymodules/python2.7/matplotlib/backends/backend_agg.py",
line 451, in draw
    self.figure.draw(self.renderer)
  File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
in draw_wrapper
    draw(artist, renderer, *args, **kwargs)
  File "/usr/lib/pymodules/python2.7/matplotlib/figure.py", line 1034, in draw
    func(*args)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/axes3d.py",
line 270, in draw
    Axes.draw(self, renderer)
  File "/usr/lib/pymodules/python2.7/matplotlib/artist.py", line 55,
in draw_wrapper
    draw(artist, renderer, *args, **kwargs)
  File "/usr/lib/pymodules/python2.7/matplotlib/axes.py", line 2086, in draw
    a.draw(renderer)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/art3d.py",
line 117, in draw
    xs, ys, zs = proj3d.proj_transform(xs3d, ys3d, zs3d, renderer.M)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
line 194, in proj_transform
    return proj_transform_vec(vec, M)
  File "/usr/lib/pymodules/python2.7/mpl_toolkits/mplot3d/proj3d.py",
line 153, in proj_transform_vec
    vecw = np.dot(M, vec)
TypeError: can't multiply sequence by non-int of type 'float'

=== END ===

I am using the basic_example.py as a template.

http://matplotlib.org/1.4.1/examples/animation/basic_example.html

What could I be missing? Appreciate any help in this regard,

Thanks!

SK

-- 
Shakthi Kannan
http://www.shakthimaan.com

I have not used `easy_install` recently.  I would suggest trying pip, or
doing a source install from a git checkout.

I also have not seen that error message at the bottom before.

Tom

On Thu, Sep 17, 2015 at 10:06 AM Zaiwen Gong <zg...@bn...> wrote:

> Hi,
>
> I am trying to install matplotlib on my RedHat Linux 6.5 with Python33.
>
> Unfortunately, 'matplotlib' rpm isn't available for python33. `python-matplotlib` is included only for python2.6 from Red Hat Linux 6.5.
>
> So I try installing the latest module from matplotlib source using 'python easy_install'.
>
> # *scl enable python33 'bash'*
> # *easy_install -m matplotlib
> *
> The install finished fine, but I am still get this error when I tried to import matplotlib. Is there anything else that I need to config?
>
> # scl enable python33 'python'
> Python 3.3.2 (default, Mar 20 2014, 20:25:51)
> [GCC 4.4.6 20120305 (Red Hat 4.4.6-4)] on linux
> Type "help", "copyright", "credits" or "license" for more information.
> >>> import numpy
> >>> import scipy
> >>> import matplotlib
> Traceback (most recent call last):
>   File "<stdin>", line 1, in <module>
> ImportError: No module named 'matplotlib'
>
>
> Below is the console when I run "easy_install -m matplotlib".
> *At the end, it says "Finished processing dependencies for matplotlib".
> Does that mean matplotlib is not really installed yet?*
> Do I miss any steps?
>
> ******************************************************************************************************************
>
> Searching for matplotlib
> Reading https://pypi.python.org/simple/matplotlib/
> Reading http://matplotlib.org
> Reading http://matplotlib.sourceforge.net
> Reading http://sourceforge.net/project/showfiles.php?group_id=80706
> Reading
> http://sourceforge.net/project/showfiles.php?group_id=80706&package_id=82474
> Reading
> http://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.1.0/
> Reading
> http://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.1.1/
> Reading
> https://sourceforge.net/project/showfiles.php?group_id=80706&package_id=278194
> Reading
> https://sourceforge.net/project/showfiles.php?group_id=80706&package_id=82474
> Reading
> https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-0.99.1/
> Reading
> https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-0.99.3/
> Reading
> https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.0
> Reading
> https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.0.1/
> Best match: matplotlib 1.4.3
> Downloading
> https://pypi.python.org/packages/source/m/matplotlib/matplotlib-1.4.3.tar.gz#md5=86af2e3e3c61849ac7576a6f5ca44267
> Processing matplotlib-1.4.3.tar.gz
> Writing /tmp/easy_install-uiv2i6/matplotlib-1.4.3/setup.cfg
> Running matplotlib-1.4.3/setup.py -q bdist_egg --dist-dir
> /tmp/easy_install-uiv2i6/matplotlib-1.4.3/egg-dist-tmp-dn5itl
> ============================================================================
>
> Edit setup.cfg to change the build options
>
> BUILDING MATPLOTLIB
>             matplotlib: yes [1.4.3]
>                 python: yes [3.3.2 (default, Mar 20 2014, 20:25:51) [GCC
>                         4.4.6 20120305 (Red Hat 4.4.6-4)]]
>               platform: yes [linux]
>
> REQUIRED DEPENDENCIES AND EXTENSIONS
>                  numpy: yes [version 1.7.1]
>                    six: yes [The installed version of six is 1.3.0 but a
> the minimum required version is 1.4. pip/easy install will attempt to
> install a newer version.]
>               dateutil: yes [dateutil was not found. It is required for
> date axis support. pip/easy_install may attempt to install it after
> matplotlib.]
>                   pytz: yes [pytz was not found. pip will attempt to
> install it after matplotlib.]
>                tornado: yes [tornado was not found. It is required for the
> WebAgg backend. pip/easy_install may attempt to install it after
> matplotlib.]
>              pyparsing: yes [pyparsing was not found. It is required for
> mathtext support. pip/easy_install may attempt to install it after
> matplotlib.]
>                  pycxx: yes [Official versions of PyCXX are not compatible
> with matplotlib on Python 3.x, since they lack support for the buffer
> object.  Using local copy]
>                 libagg: yes [pkg-config information for 'libagg' could not
> be found. Using local copy.]
>               freetype: yes [version 2.3.11]
>                    png: yes [version 1.2.49]
>                  qhull: yes [pkg-config information for 'qhull' could not
> be
>                         found. Using local copy.]
>
> OPTIONAL SUBPACKAGES
>            sample_data: yes [installing]
>               toolkits: yes [installing]
>                  tests: yes [using nose version 1.3.0 / using
> unittest.mock]
>         toolkits_tests: yes [using nose version 1.3.0 / using
> unittest.mock]
>
> OPTIONAL BACKEND EXTENSIONS
>                 macosx: no  [Mac OS-X only]
>                 qt5agg: no  [PyQt5 not found]
>                 qt4agg: no  [PyQt4 not found]
>                 pyside: no  [PySide not found]
>                gtk3agg: no  [Requires pygobject to be installed.]
>              gtk3cairo: no  [Requires cairocffi or pycairo to be
> installed.]
>                 gtkagg: no  [Requires pygtk]
>                  tkagg: no  [The C/C++ header for Tk (tk.h) could not be
> found.  You may need to install the development package.]
>                  wxagg: no  [requires wxPython]
>                    gtk: no  [Requires pygtk]
>                    agg: yes [installing]
>                  cairo: no  [cairocffi or pycairo not found]
>              windowing: no  [Microsoft Windows only]
>
> OPTIONAL LATEX DEPENDENCIES
>                 dvipng: yes [version 1.11]
>            ghostscript: yes [version 8.70]
>                  latex: yes [version 3.141592]
>                pdftops: no
>
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from src/file_compat.h:7,
>                  from src/ft2font.cpp:7:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> In file included from src/ft2font.cpp:7:
> src/file_compat.h: In function ���FILE* mpl_PyFile_Dup(PyObject*, char*,
> off_t*)���:
> src/file_compat.h:66: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:66: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:82: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:82: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:109: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:109: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h: In function ���int mpl_PyFile_DupClose(PyObject*,
> FILE*, off_t)���:
> src/file_compat.h:155: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:155: warning: deprecated conversion from string constant
> to ���char*���
> src/ft2font.h: In constructor
> ���FT2Font::FT2Font(Py::PythonClassInstance*, Py::Tuple&, Py::Dict&)���:
> src/ft2font.h:140: warning: ���FT2Font::face��� will be initialized after
> src/ft2font.h:136: warning:   ���Py::Object FT2Font::image���
> src/ft2font.cpp:851: warning:   when initialized here
> src/ft2font.cpp: In member function ���Py::Object
> FT2Image::py_write_bitmap(const Py::Tuple&)���:
> src/ft2font.cpp:184: warning: ���offset��� may be used uninitialized in
> this function
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/_png.cpp:28:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> In file included from src/_png.cpp:31:
> src/file_compat.h: In function ���FILE* mpl_PyFile_Dup(PyObject*, char*,
> off_t*)���:
> src/file_compat.h:66: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:66: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:82: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:82: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:109: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:109: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h: In function ���int mpl_PyFile_DupClose(PyObject*,
> FILE*, off_t)���:
> src/file_compat.h:155: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:155: warning: deprecated conversion from string constant
> to ���char*���
> src/_png.cpp: In member function ���PyObject* _png_module::_read_png(const
> Py::Object&, bool, int)���:
> src/_png.cpp:331: warning: deprecated conversion from string constant to
> ���char*���
> src/_png.cpp:316: warning: ���offset��� may be used uninitialized in this
> function
> src/_png.cpp: In member function ���Py::Object
> _png_module::write_png(const Py::Tuple&)���:
> src/_png.cpp:108: warning: ���offset��� may be used uninitialized in this
> function
> /usr/bin/ld: skipping incompatible /usr/lib/libpng12.so when searching for
> -lpng12
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/_image.cpp:12:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> src/_image.cpp: In member function ���Py::Object
> _image_module::from_images(const Py::Tuple&)���:
> src/_image.cpp:805: warning: ���alpha��� may be used uninitialized in this
> function
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> src/_ttconv.cpp: In member function ���virtual void
> PythonFileWriter::write(const char*)���:
> src/_ttconv.cpp:57: warning: deprecated conversion from string constant to
> ���char*���
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/agg_py_path_iterator.h:7,
>                  from src/_path.cpp:3:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> src/_path.cpp: In function ���void point_in_path_impl(const void*, size_t,
> size_t, size_t, T&, npy_bool*) [with T = points_in_path(const void*,
> size_t, size_t, size_t, double, PathIterator&, const agg::trans_affine&,
> npy_bool*)::contour_t]���:
> src/_path.cpp:302:   instantiated from here
> src/_path.cpp:168: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:302:   instantiated from here
> src/_path.cpp:196: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:196: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:246: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:246: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp: In function ���void point_in_path_impl(const void*, size_t,
> size_t, size_t, T&, npy_bool*) [with T = points_on_path(const void*,
> size_t, size_t, size_t, double, PathIterator&, const agg::trans_affine&,
> npy_bool*)::stroke_t]���:
> src/_path.cpp:336:   instantiated from here
> src/_path.cpp:168: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:336:   instantiated from here
> src/_path.cpp:196: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:196: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:246: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> src/_path.cpp:246: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/path_cleanup.cpp:5:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/agg_py_transforms.cpp:6:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/cntr.c:23:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from
> lib/matplotlib/delaunay/VoronoiDiagramGenerator.h:34,
>                  from lib/matplotlib/delaunay/_delaunay.cpp:6:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from
> lib/matplotlib/delaunay/VoronoiDiagramGenerator.cpp:38:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> lib/matplotlib/delaunay/VoronoiDiagramGenerator.cpp: In member function
> ���bool VoronoiDiagramGenerator::voronoi(int)���:
> lib/matplotlib/delaunay/VoronoiDiagramGenerator.cpp:923: warning:
> ���newintstar.Point::y��� may be used uninitialized in this function
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/noprefix.h:9,
>                  from src/qhull_wrap.c:9:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from lib/matplotlib/tri/_tri.h:68,
>                  from lib/matplotlib/tri/_tri.cpp:8:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/agg_py_transforms.cpp:6:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> In file included from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
>                  from
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
>                  from src/agg_py_path_iterator.h:7,
>                  from src/_backend_agg.h:43,
>                  from src/_backend_agg.cpp:12:
> /opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2:
> warning: #warning "Using deprecated NumPy API, disable it by #defining
> NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
> In file included from src/_backend_agg.cpp:44:
> src/file_compat.h: In function ���FILE* mpl_PyFile_Dup(PyObject*, char*,
> off_t*)���:
> src/file_compat.h:66: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:66: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:82: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:82: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:109: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:109: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h: In function ���int mpl_PyFile_DupClose(PyObject*,
> FILE*, off_t)���:
> src/file_compat.h:155: warning: deprecated conversion from string constant
> to ���char*���
> src/file_compat.h:155: warning: deprecated conversion from string constant
> to ���char*���
> src/_backend_agg.cpp: In member function ���Py::Object
> RendererAgg::draw_markers(const Py::Tuple&)���:
> src/_backend_agg.cpp:791: warning: dereferencing type-punned pointer will
> break strict-aliasing rules
> src/_backend_agg.cpp:791: warning: dereferencing type-punned pointer will
> break strict-aliasing rules
> src/_backend_agg.cpp:829: warning: dereferencing type-punned pointer will
> break strict-aliasing rules
> src/_backend_agg.cpp:829: warning: dereferencing type-punned pointer will
> break strict-aliasing rules
> /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
>
> Installed
> /opt/rh/python33/root/usr/lib/python3.3/site-packages/matplotlib-1.4.3-py3.3-linux-x86_64.egg
>
> Because this distribution was installed --multi-version, before you can
> import modules from this package in an application, you will need to
> 'import pkg_resources' and then use a 'require()' call similar to one of
> these examples, in order to select the desired version:
>
>     pkg_resources.require("matplotlib")  # latest installed version
>     pkg_resources.require("matplotlib==1.4.3")  # this exact version
>     pkg_resources.require("matplotlib>=1.4.3")  # this version or higher
>
> Processing dependencies for matplotlib
> Searching for pyparsing>=1.5.6,!=2.0.0
> Reading https://pypi.python.org/simple/pyparsing/
> Reading http://pyparsing.sourceforge.net/
> Reading http://pyparsing.wikispaces.com/
> Reading http://sourceforge.net/project/showfiles.php?group_id=97203
> Reading http://sourceforge.net/projects/pyparsing
> Best match: pyparsing 2.0.3
> Downloading
> https://pypi.python.org/packages/source/p/pyparsing/pyparsing-2.0.3.zip#md5=0a5ec41bb650aed802751a311b5d820d
> Processing pyparsing-2.0.3.zip
> Writing /tmp/easy_install-8vc0lc/pyparsing-2.0.3/setup.cfg
> Running pyparsing-2.0.3/setup.py -q bdist_egg --dist-dir
> /tmp/easy_install-8vc0lc/pyparsing-2.0.3/egg-dist-tmp-bdgu2g
> zip_safe flag not set; analyzing archive contents...
> __pycache__.pyparsing.cpython-33: module MAY be using inspect.stack
>
> Installed
> /opt/rh/python33/root/usr/lib/python3.3/site-packages/pyparsing-2.0.3-py3.3.egg
>
> Because this distribution was installed --multi-version, before you can
> import modules from this package in an application, you will need to
> 'import pkg_resources' and then use a 'require()' call similar to one of
> these examples, in order to select the desired version:
>
>     pkg_resources.require("pyparsing")  # latest installed version
>     pkg_resources.require("pyparsing==2.0.3")  # this exact version
>     pkg_resources.require("pyparsing>=2.0.3")  # this version or higher
>
> Searching for pytz
> Reading https://pypi.python.org/simple/pytz/
> Best match: pytz 2015.4
> Downloading
> https://pypi.python.org/packages/3.3/p/pytz/pytz-2015.4-py3.3.egg#md5=e21dada2b1eaff746d21b2ac6f76f034
> Processing pytz-2015.4-py3.3.egg
> Moving pytz-2015.4-py3.3.egg to
> /opt/rh/python33/root/usr/lib/python3.3/site-packages
>
> Installed
> /opt/rh/python33/root/usr/lib/python3.3/site-packages/pytz-2015.4-py3.3.egg
>
> Because this distribution was installed --multi-version, before you can
> import modules from this package in an application, you will need to
> 'import pkg_resources' and then use a 'require()' call similar to one of
> these examples, in order to select the desired version:
>
>     pkg_resources.require("pytz")  # latest installed version
>     pkg_resources.require("pytz==2015.4")  # this exact version
>     pkg_resources.require("pytz>=2015.4")  # this version or higher
>
> Searching for python-dateutil!=2.1
> Reading https://pypi.python.org/simple/python-dateutil/
> Reading http://labix.org/python-dateutil
> Reading https://dateutil.readthedocs.org
> Best match: python-dateutil 2.4.2
> Downloading
> https://pypi.python.org/packages/source/p/python-dateutil/python-dateutil-2.4.2.tar.gz#md5=4ef68e1c485b09e9f034e10473e5add2
> Processing python-dateutil-2.4.2.tar.gz
> Writing /tmp/easy_install-ugb9nf/python-dateutil-2.4.2/setup.cfg
> Running python-dateutil-2.4.2/setup.py -q bdist_egg --dist-dir
> /tmp/easy_install-ugb9nf/python-dateutil-2.4.2/egg-dist-tmp-7bb_lh
>
> Installed
> /opt/rh/python33/root/usr/lib/python3.3/site-packages/python_dateutil-2.4.2-py3.3.egg
>
> Because this distribution was installed --multi-version, before you can
> import modules from this package in an application, you will need to
> 'import pkg_resources' and then use a 'require()' call similar to one of
> these examples, in order to select the desired version:
>
>     pkg_resources.require("python-dateutil")  # latest installed version
>     pkg_resources.require("python-dateutil==2.4.2")  # this exact version
>     pkg_resources.require("python-dateutil>=2.4.2")  # this version or
> higher
>
> Searching for six>=1.4
> Reading https://pypi.python.org/simple/six/
> Best match: six 1.9.0
> Downloading
> https://pypi.python.org/packages/source/s/six/six-1.9.0.tar.gz#md5=476881ef4012262dfc8adc645ee786c4
> Processing six-1.9.0.tar.gz
> Writing /tmp/easy_install-5oq3yv/six-1.9.0/setup.cfg
> Running six-1.9.0/setup.py -q bdist_egg --dist-dir
> /tmp/easy_install-5oq3yv/six-1.9.0/egg-dist-tmp-q7x1ha
> no previously-included directories found matching 'documentation/_build'
> zip_safe flag not set; analyzing archive contents...
> __pycache__.six.cpython-33: module references __path__
>
> Installed
> /opt/rh/python33/root/usr/lib/python3.3/site-packages/six-1.9.0-py3.3.egg
>
> Because this distribution was installed --multi-version, before you can
> import modules from this package in an application, you will need to
> 'import pkg_resources' and then use a 'require()' call similar to one of
> these examples, in order to select the desired version:
>
>     pkg_resources.require("six")  # latest installed version
>     pkg_resources.require("six==1.9.0")  # this exact version
>     pkg_resources.require("six>=1.9.0")  # this version or higher
>
> *Finished processing dependencies for matplotlib *
> **************************************************************************************************************
>
>
> Thanks,
> Zaiwen
>
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Thank you Christoph, and thank you for the extensive package builds!

I did update to matplotlib 1.5 and it seems to address the error; I get all
of my plots and they look correct, though I did get the following warning
on Python 2.7.10:

[c:\python\dev\homework1] python PHYS404-homework1-problem3-rev05.py
C:\Python27\lib\site-packages\numpy\core\fromnumeric.py:2648:
RuntimeWarning: invalid value encountered in rint
  return round(decimals, out)

... and the same on CPython 3.4 (do you think 3.5 is stable enough to move
to?):

[c:\python\dev\homework1] python PHYS404-homework1-problem3-rev05.py
C:\Python34\lib\site-packages\numpy\core\fromnumeric.py:2648:
RuntimeWarning: invalid value encountered in rint
  return round(decimals, out)

Many thanks again,
Bobby

On Thu, Sep 17, 2015 at 11:23 PM, <
mat...@li...> wrote:

> Today's Topics:
>
>    1. Re: bug report (Christoph Gohlke)
>    2. Re: bug report (Bobby Wilkins)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 17 Sep 2015 10:30:30 -0700
> From: Christoph Gohlke <cg...@uc...>
> Subject: Re: [Matplotlib-users] bug report
> To: mat...@li...
> Message-ID: <55F...@uc...>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> I can reproduce the AttributeError on all Python versions and the crash
> (in Python's _tkinter.pyd extension) on Python 3.4.
>
> As a workaround you might try to upgrade to matplotlib 1.5, which seems
> to work for me.
>
> Christoph
>
>

One more note: changing the plot type from loglog to just plot, the errors
also go away.

On Thu, Sep 17, 2015 at 11:23 PM, Bobby Wilkins <bob...@gm...>
wrote:

> I installed CPython 2.7.10, and the appropriate versions of the same
> packages, and I still get the same error:
>

I installed CPython 2.7.10, and the appropriate versions of the same
packages, and I still get the same error:

[c:\python\dev\homework1] pip list
backports.ssl-match-hostname (3.4.0.2)
certifi (2015.9.6.2)
decorator (4.0.2)
functools32 (3.2.3.post2)
ipykernel (4.0.3)
ipyparallel (4.0.2)
ipython (4.0.0)
ipython-genutils (0.1.0)
ipywidgets (4.0.2)
Jinja2 (2.8)
jsonschema (2.5.1)
jupyter (1.0.0)
jupyter-client (4.0.0)
jupyter-console (4.0.2)
jupyter-core (4.0.5)
MarkupSafe (0.23)
matplotlib (1.4.3)
mistune (0.7.1)
nbconvert (4.0.0)
nbformat (4.0.0)
notebook (4.0.4)
numpy (1.9.2)
path.py (8.1.1)
pickleshare (0.5)
Pillow (2.9.0)
pip (7.1.2)
Pygments (2.0.2)
pyparsing (2.0.3)
pyreadline (2.1)
python-dateutil (2.4.2)
pytz (2015.4)
pyzmq (14.7.0)
qtconsole (4.0.0)
scipy (0.16.0)
setuptools (18.3)
simplegeneric (0.8.1)
six (1.9.0)
tornado (4.2.1)
traitlets (4.0.0)

Note: the program does not error if last "if" in the source reads:

if (maxTerm<32)#: or ((myFigBase<4) and (maxTerm<64)):

If I change it to something like this:

if (maxTerm<32) or ((myFigBase<4) and (maxTerm<64)):

... I get the below error:

[c:\python\dev\homework1] python PHYS404-homework1-problem3-rev05.py
Traceback (most recent call last):
  File "PHYS404-homework1-problem3-rev05.py", line 196, in <module>
    graphMyetoNegX(mySlices,myRuns,0,1,0)
  File "PHYS404-homework1-problem3-rev05.py", line 185, in graphMyetoNegX

plt.savefig(figStrName+str(myFigBase*3+3).zfill(2)+figStrExt,bbox_inches='tight')
  File "C:\Python27\lib\site-packages\matplotlib\pyplot.py", line 577, in
savefig
    res = fig.savefig(*args, **kwargs)
  File "C:\Python27\lib\site-packages\matplotlib\figure.py", line 1476, in
savefig
    self.canvas.print_figure(*args, **kwargs)
  File "C:\Python27\lib\site-packages\matplotlib\backend_bases.py", line
2158, in print_figure
    **kwargs)
  File "C:\Python27\lib\site-packages\matplotlib\backends\backend_agg.py",
line 521, in print_png
    FigureCanvasAgg.draw(self)
  File "C:\Python27\lib\site-packages\matplotlib\backends\backend_agg.py",
line 469, in draw
    self.figure.draw(self.renderer)
  File "C:\Python27\lib\site-packages\matplotlib\artist.py", line 59, in
draw_wrapper
    draw(artist, renderer, *args, **kwargs)
  File "C:\Python27\lib\site-packages\matplotlib\figure.py", line 1085, in
draw
    func(*args)
  File "C:\Python27\lib\site-packages\matplotlib\artist.py", line 59, in
draw_wrapper
    draw(artist, renderer, *args, **kwargs)
  File "C:\Python27\lib\site-packages\matplotlib\axes\_base.py", line 2110,
in draw
    a.draw(renderer)
  File "C:\Python27\lib\site-packages\matplotlib\artist.py", line 59, in
draw_wrapper
    draw(artist, renderer, *args, **kwargs)
  File "C:\Python27\lib\site-packages\matplotlib\text.py", line 642, in draw
    ismath=ismath, mtext=mtext)
  File "C:\Python27\lib\site-packages\matplotlib\backends\backend_agg.py",
line 206, in draw_text
    font.get_image(), np.round(x - xd), np.round(y + yd) + 1, angle, gc)
  File "C:\Python27\lib\site-packages\numpy\core\fromnumeric.py", line
2648, in round_
    return round(decimals, out)
  File "C:\Python27\lib\site-packages\numpy\ma\core.py", line 4903, in round
    result._mask = self._mask
AttributeError: 'numpy.float64' object has no attribute '_mask'

On Thu, Sep 17, 2015 at 6:46 AM, Bobby Wilkins <bob...@gm...>
wrote:

> Thank you all.
>
> I am using Python 3.4.3.
>
> I meant to include a pip list:
>
> Assimulo (2.8)
> decorator (4.0.2)
> gmpy2 (2.0.7)
> ipykernel (4.0.3)
> ipython (4.0.0)
> ipython-genutils (0.1.0)
> ipywidgets (4.0.2)
> Jinja2 (2.8)
> jsonschema (2.5.1)
> jupyter-client (4.0.0)
> jupyter-core (4.0.4)
> MarkupSafe (0.23)
> matplotlib (1.4.3)
> mistune (0.7.1)
> nbconvert (4.0.0)
> nbformat (4.0.0)
> nose (1.3.7)
> notebook (4.0.4)
> numpy (1.9.2)
> pandas (0.16.2)
> path.py (8.1)
> pickleshare (0.5)
> pip (7.1.2)
> Pygments (2.0.2)
> pyparsing (2.0.3)
> pyreadline (2.0)
> python-dateutil (2.4.2)
> pytz (2015.4)
> pyzmq (14.7.0)
> requests (2.7.0)
> scipy (0.16.0)
> setuptools (18.2)
> simplegeneric (0.8.1)
> six (1.9.0)
> sympy (0.7.6)
> testpath (0.2)
> tornado (4.2.1)
> traitlets (4.0.0)
>
> So, if the program works for Python 2.7 but not 3.4.3, maybe that is the
> problem?  Let me try to install Python 2.7 tonight and see what that does.
>
> On Wed, Sep 16, 2015 at 8:39 AM, Sterling Smith <sm...@fu...>
> wrote:
>
>> Works fine for
>>
>> {{{
>>  : python
>> Python 2.7.10 (default, Sep 15 2015, 11:26:42)
>> [GCC 4.2.1 Compatible Apple LLVM 6.0 (clang-600.0.57)] on darwin
>> Type "help", "copyright", "credits" or "license" for more information.
>> /Users/smithsp/.pyhistory
>> >>> import matplotlib
>> >>> matplotlib.__version__
>> '1.4.3'
>> >>> import numpy
>> >>> numpy.__version__
>> '1.9.2'
>> >>> matplotlib.get_backend()
>> u’MacOSX'
>> }}}
>>
>> All are obtained through MacPorts on OSX 10.9.5.
>>
>> -Sterling
>>
>>
>>
>> On Sep 16, 2015, at 6:50AM, Benjamin Root <ben...@gm...> wrote:
>>
>> > Btw, I can't reproduce the problem using matplotlib master, numpy
>> master and linux. I know it isn't at all similar to your setup, but it is a
>> data point.
>> >
>> > On Wed, Sep 16, 2015 at 9:43 AM, Benjamin Root <ben...@gm...>
>> wrote:
>> > What version of numpy do you have installed?
>> >
>> > On Wed, Sep 16, 2015 at 5:35 AM, Bobby Wilkins <bob...@gm...>
>> wrote:
>> > OS: Windows 8.1 Pro
>> >
>> > matplotlib version: 1.4.3
>> >
>> > where obtained: http://www.lfd.uci.edu/~gohlke/pythonlibs/
>> >
>> > customizations: none
>> >
>> > Sample Program: attached py file; this is a Physics homework problem; I
>> have the answers I need, but would like to fix the errors to be able to
>> label all lines.
>> >
>> > Debug output in attached output.txt file
>> >
>> > If you uncomment line 180, the error is reported as if it came from
>> that line even though there is no float64 on that line (savefig).  If
>> commented, it does not report a line from my .py file...
>> >
>> > If you make line 170 read as follows, the error goes away:
>> >
>> > if (maxTerm<32):
>> >
>> > This suggests to me that the additional labels for the 32, 64, 128, and
>> 154 term runs is what is triggering the bug, but I cannot figure out what
>> it is.
>> >
>> > Also, separate note, just about any time I make figures, when closing
>> the last figure I get a python.exe app crash and this message:
>> >
>> > alloc: invalid block: 00000000044E7680: 0 d
>> >
>> >
>> > Thank you for any help,
>> > Bobby
>> >
>> >
>> >
>> ------------------------------------------------------------------------------
>> > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>> > Get real-time metrics from all of your servers, apps and tools
>> > in one place.
>> > SourceForge users - Click here to start your Free Trial of Datadog now!
>> > http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>> > _______________________________________________
>> > Matplotlib-users mailing list
>> > Mat...@li...
>> > https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>> >
>> >
>> >
>> >
>> ------------------------------------------------------------------------------
>> > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>> > Get real-time metrics from all of your servers, apps and tools
>> > in one place.
>> > SourceForge users - Click here to start your Free Trial of Datadog now!
>> >
>> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140_______________________________________________
>> > Matplotlib-users mailing list
>> > Mat...@li...
>> > https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>
>>
>

I can reproduce the AttributeError on all Python versions and the crash 
(in Python's _tkinter.pyd extension) on Python 3.4.

As a workaround you might try to upgrade to matplotlib 1.5, which seems 
to work for me.

Christoph


On 9/17/2015 6:46 AM, Bobby Wilkins wrote:
> Thank you all.
>
> I am using Python 3.4.3.
>
> I meant to include a pip list:
>
> Assimulo (2.8)
> decorator (4.0.2)
> gmpy2 (2.0.7)
> ipykernel (4.0.3)
> ipython (4.0.0)
> ipython-genutils (0.1.0)
> ipywidgets (4.0.2)
> Jinja2 (2.8)
> jsonschema (2.5.1)
> jupyter-client (4.0.0)
> jupyter-core (4.0.4)
> MarkupSafe (0.23)
> matplotlib (1.4.3)
> mistune (0.7.1)
> nbconvert (4.0.0)
> nbformat (4.0.0)
> nose (1.3.7)
> notebook (4.0.4)
> numpy (1.9.2)
> pandas (0.16.2)
> path.py (8.1)
> pickleshare (0.5)
> pip (7.1.2)
> Pygments (2.0.2)
> pyparsing (2.0.3)
> pyreadline (2.0)
> python-dateutil (2.4.2)
> pytz (2015.4)
> pyzmq (14.7.0)
> requests (2.7.0)
> scipy (0.16.0)
> setuptools (18.2)
> simplegeneric (0.8.1)
> six (1.9.0)
> sympy (0.7.6)
> testpath (0.2)
> tornado (4.2.1)
> traitlets (4.0.0)
>
> So, if the program works for Python 2.7 but not 3.4.3, maybe that is the
> problem?  Let me try to install Python 2.7 tonight and see what that does.
>
> On Wed, Sep 16, 2015 at 8:39 AM, Sterling Smith <sm...@fu...
> <mailto:sm...@fu...>> wrote:
>
>     Works fine for
>
>     {{{
>       : python
>     Python 2.7.10 (default, Sep 15 2015, 11:26:42)
>     [GCC 4.2.1 Compatible Apple LLVM 6.0 (clang-600.0.57)] on darwin
>     Type "help", "copyright", "credits" or "license" for more information.
>     /Users/smithsp/.pyhistory
>     >>> import matplotlib
>     >>> matplotlib.__version__
>     '1.4.3'
>     >>> import numpy
>     >>> numpy.__version__
>     '1.9.2'
>     >>> matplotlib.get_backend()
>     u’MacOSX'
>     }}}
>
>     All are obtained through MacPorts on OSX 10.9.5.
>
>     -Sterling
>
>
>
>     On Sep 16, 2015, at 6:50AM, Benjamin Root <ben...@gm...
>     <mailto:ben...@gm...>> wrote:
>
>     > Btw, I can't reproduce the problem using matplotlib master, numpy master and linux. I know it isn't at all similar to your setup, but it is a data point.
>     >
>     > On Wed, Sep 16, 2015 at 9:43 AM, Benjamin Root <ben...@gm... <mailto:ben...@gm...>> wrote:
>     > What version of numpy do you have installed?
>     >
>     > On Wed, Sep 16, 2015 at 5:35 AM, Bobby Wilkins <bob...@gm... <mailto:bob...@gm...>> wrote:
>     > OS: Windows 8.1 Pro
>     >
>     > matplotlib version: 1.4.3
>     >
>     > where obtained:http://www.lfd.uci.edu/~gohlke/pythonlibs/
>     <http://www.lfd.uci.edu/%7Egohlke/pythonlibs/>
>     >
>     > customizations: none
>     >
>     > Sample Program: attached py file; this is a Physics homework problem; I have the answers I need, but would like to fix the errors to be able to label all lines.
>     >
>     > Debug output in attached output.txt file
>     >
>     > If you uncomment line 180, the error is reported as if it came from that line even though there is no float64 on that line (savefig).  If commented, it does not report a line from my .py file...
>     >
>     > If you make line 170 read as follows, the error goes away:
>     >
>     > if (maxTerm<32):
>     >
>     > This suggests to me that the additional labels for the 32, 64, 128, and 154 term runs is what is triggering the bug, but I cannot figure out what it is.
>     >
>     > Also, separate note, just about any time I make figures, when closing the last figure I get a python.exe app crash and this message:
>     >
>     > alloc: invalid block: 00000000044E7680: 0 d
>     >
>     >
>     > Thank you for any help,
>     > Bobby
>     >
>     >
>     > ------------------------------------------------------------------------------
>     > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>     > Get real-time metrics from all of your servers, apps and tools
>     > in one place.
>     > SourceForge users - Click here to start your Free Trial of Datadog now!
>     >http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>     > _______________________________________________
>     > Matplotlib-users mailing list
>     >Mat...@li...
>     <mailto:Mat...@li...>
>     >https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>     >
>     >
>     >
>     > ------------------------------------------------------------------------------
>     > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>     > Get real-time metrics from all of your servers, apps and tools
>     > in one place.
>     > SourceForge users - Click here to start your Free Trial of Datadog now!
>     >http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140_______________________________________________
>     > Matplotlib-users mailing list
>     >Mat...@li...
>     <mailto:Mat...@li...>
>     >https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>
>
>
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>
>
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Hi,

I am trying to install matplotlib on my RedHat Linux 6.5 with Python33.

Unfortunately, 'matplotlib' rpm isn't available for python33. `python-matplotlib` is included only for python2.6 from Red Hat Linux 6.5.

So I try installing the latest module from matplotlib source using 'python easy_install'.

#*scl enable python33 'bash'*
#*easy_install -m matplotlib
*
The install finished fine, but I am still get this error when I tried to import matplotlib. Is there anything else that I need to config?

# scl enable python33 'python'
Python 3.3.2 (default, Mar 20 2014, 20:25:51)
[GCC 4.4.6 20120305 (Red Hat 4.4.6-4)] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import numpy
>>> import scipy
>>> import matplotlib
Traceback (most recent call last):
   File "<stdin>", line 1, in <module>
ImportError: No module named 'matplotlib'


Below is the console when I run "easy_install -m matplotlib".
*At the end, it says "Finished processing dependencies for matplotlib". 
Does that mean matplotlib is not really installed yet?*
Do I miss any steps?

****************************************************************************************************************** 

Searching for matplotlib
Reading https://pypi.python.org/simple/matplotlib/
Reading http://matplotlib.org
Reading http://matplotlib.sourceforge.net
Reading http://sourceforge.net/project/showfiles.php?group_id=80706
Reading 
http://sourceforge.net/project/showfiles.php?group_id=80706&package_id=82474 

Reading 
http://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.1.0/ 

Reading 
http://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.1.1/ 

Reading 
https://sourceforge.net/project/showfiles.php?group_id=80706&package_id=278194 

Reading 
https://sourceforge.net/project/showfiles.php?group_id=80706&package_id=82474 

Reading 
https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-0.99.1/ 

Reading 
https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-0.99.3/ 

Reading 
https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.0
Reading 
https://sourceforge.net/projects/matplotlib/files/matplotlib/matplotlib-1.0.1/ 

Best match: matplotlib 1.4.3
Downloading 
https://pypi.python.org/packages/source/m/matplotlib/matplotlib-1.4.3.tar.gz#md5=86af2e3e3c61849ac7576a6f5ca44267 

Processing matplotlib-1.4.3.tar.gz
Writing /tmp/easy_install-uiv2i6/matplotlib-1.4.3/setup.cfg
Running matplotlib-1.4.3/setup.py -q bdist_egg --dist-dir 
/tmp/easy_install-uiv2i6/matplotlib-1.4.3/egg-dist-tmp-dn5itl
============================================================================ 

Edit setup.cfg to change the build options

BUILDING MATPLOTLIB
             matplotlib: yes [1.4.3]
                 python: yes [3.3.2 (default, Mar 20 2014, 20:25:51) [GCC
                         4.4.6 20120305 (Red Hat 4.4.6-4)]]
               platform: yes [linux]

REQUIRED DEPENDENCIES AND EXTENSIONS
                  numpy: yes [version 1.7.1]
                    six: yes [The installed version of six is 1.3.0 but 
a the minimum required version is 1.4. pip/easy install will attempt to 
install a newer version.]
               dateutil: yes [dateutil was not found. It is required for 
date axis support. pip/easy_install may attempt to install it after 
matplotlib.]
                   pytz: yes [pytz was not found. pip will attempt to 
install it after matplotlib.]
                tornado: yes [tornado was not found. It is required for 
the WebAgg backend. pip/easy_install may attempt to install it after 
matplotlib.]
              pyparsing: yes [pyparsing was not found. It is required 
for mathtext support. pip/easy_install may attempt to install it after 
matplotlib.]
                  pycxx: yes [Official versions of PyCXX are not 
compatible with matplotlib on Python 3.x, since they lack support for 
the buffer object.  Using local copy]
                 libagg: yes [pkg-config information for 'libagg' could 
not be found. Using local copy.]
               freetype: yes [version 2.3.11]
                    png: yes [version 1.2.49]
                  qhull: yes [pkg-config information for 'qhull' could 
not be
                         found. Using local copy.]

OPTIONAL SUBPACKAGES
            sample_data: yes [installing]
               toolkits: yes [installing]
                  tests: yes [using nose version 1.3.0 / using 
unittest.mock]
         toolkits_tests: yes [using nose version 1.3.0 / using 
unittest.mock]

OPTIONAL BACKEND EXTENSIONS
                 macosx: no  [Mac OS-X only]
                 qt5agg: no  [PyQt5 not found]
                 qt4agg: no  [PyQt4 not found]
                 pyside: no  [PySide not found]
                gtk3agg: no  [Requires pygobject to be installed.]
              gtk3cairo: no  [Requires cairocffi or pycairo to be 
installed.]
                 gtkagg: no  [Requires pygtk]
                  tkagg: no  [The C/C++ header for Tk (tk.h) could not 
be found.  You may need to install the development package.]
                  wxagg: no  [requires wxPython]
                    gtk: no  [Requires pygtk]
                    agg: yes [installing]
                  cairo: no  [cairocffi or pycairo not found]
              windowing: no  [Microsoft Windows only]

OPTIONAL LATEX DEPENDENCIES
                 dvipng: yes [version 1.11]
            ghostscript: yes [version 8.70]
                  latex: yes [version 3.141592]
                pdftops: no

In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from src/file_compat.h:7,
                  from src/ft2font.cpp:7:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
In file included from src/ft2font.cpp:7:
src/file_compat.h: In function ���FILE* mpl_PyFile_Dup(PyObject*, char*, 
off_t*)���:
src/file_compat.h:66: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:66: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:82: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:82: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:109: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:109: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h: In function ���int mpl_PyFile_DupClose(PyObject*, 
FILE*, off_t)���:
src/file_compat.h:155: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:155: warning: deprecated conversion from string 
constant to ���char*���
src/ft2font.h: In constructor 
���FT2Font::FT2Font(Py::PythonClassInstance*, Py::Tuple&, Py::Dict&)���:
src/ft2font.h:140: warning: ���FT2Font::face��� will be initialized after
src/ft2font.h:136: warning:   ���Py::Object FT2Font::image���
src/ft2font.cpp:851: warning:   when initialized here
src/ft2font.cpp: In member function ���Py::Object 
FT2Image::py_write_bitmap(const Py::Tuple&)���:
src/ft2font.cpp:184: warning: ���offset��� may be used uninitialized in 
this function
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/_png.cpp:28:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
In file included from src/_png.cpp:31:
src/file_compat.h: In function ���FILE* mpl_PyFile_Dup(PyObject*, char*, 
off_t*)���:
src/file_compat.h:66: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:66: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:82: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:82: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:109: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:109: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h: In function ���int mpl_PyFile_DupClose(PyObject*, 
FILE*, off_t)���:
src/file_compat.h:155: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:155: warning: deprecated conversion from string 
constant to ���char*���
src/_png.cpp: In member function ���PyObject* 
_png_module::_read_png(const Py::Object&, bool, int)���:
src/_png.cpp:331: warning: deprecated conversion from string constant to 
���char*���
src/_png.cpp:316: warning: ���offset��� may be used uninitialized in 
this function
src/_png.cpp: In member function ���Py::Object 
_png_module::write_png(const Py::Tuple&)���:
src/_png.cpp:108: warning: ���offset��� may be used uninitialized in 
this function
/usr/bin/ld: skipping incompatible /usr/lib/libpng12.so when searching 
for -lpng12
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/_image.cpp:12:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
src/_image.cpp: In member function ���Py::Object 
_image_module::from_images(const Py::Tuple&)���:
src/_image.cpp:805: warning: ���alpha��� may be used uninitialized in 
this function
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
src/_ttconv.cpp: In member function ���virtual void 
PythonFileWriter::write(const char*)���:
src/_ttconv.cpp:57: warning: deprecated conversion from string constant 
to ���char*���
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/agg_py_path_iterator.h:7,
                  from src/_path.cpp:3:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
src/_path.cpp: In function ���void point_in_path_impl(const void*, 
size_t, size_t, size_t, T&, npy_bool*) [with T = points_in_path(const 
void*, size_t, size_t, size_t, double, PathIterator&, const 
agg::trans_affine&, npy_bool*)::contour_t]���:
src/_path.cpp:302:   instantiated from here
src/_path.cpp:168: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:302:   instantiated from here
src/_path.cpp:196: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:196: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:246: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:246: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp: In function ���void point_in_path_impl(const void*, 
size_t, size_t, size_t, T&, npy_bool*) [with T = points_on_path(const 
void*, size_t, size_t, size_t, double, PathIterator&, const 
agg::trans_affine&, npy_bool*)::stroke_t]���:
src/_path.cpp:336:   instantiated from here
src/_path.cpp:168: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:336:   instantiated from here
src/_path.cpp:196: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:196: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:246: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
src/_path.cpp:246: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/path_cleanup.cpp:5:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/agg_py_transforms.cpp:6:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/cntr.c:23:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from 
lib/matplotlib/delaunay/VoronoiDiagramGenerator.h:34,
                  from lib/matplotlib/delaunay/_delaunay.cpp:6:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from 
lib/matplotlib/delaunay/VoronoiDiagramGenerator.cpp:38:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
lib/matplotlib/delaunay/VoronoiDiagramGenerator.cpp: In member function 
���bool VoronoiDiagramGenerator::voronoi(int)���:
lib/matplotlib/delaunay/VoronoiDiagramGenerator.cpp:923: warning: 
���newintstar.Point::y��� may be used uninitialized in this function
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/noprefix.h:9,
                  from src/qhull_wrap.c:9:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from lib/matplotlib/tri/_tri.h:68,
                  from lib/matplotlib/tri/_tri.cpp:8:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/agg_py_transforms.cpp:6:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
In file included from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarraytypes.h:1728,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/ndarrayobject.h:17,
                  from 
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/arrayobject.h:15,
                  from src/agg_py_path_iterator.h:7,
                  from src/_backend_agg.h:43,
                  from src/_backend_agg.cpp:12:
/opt/rh/python33/root/usr/lib64/python3.3/site-packages/numpy/core/include/numpy/npy_deprecated_api.h:11:2: 
warning: #warning "Using deprecated NumPy API, disable it by #defining 
NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION"
In file included from src/_backend_agg.cpp:44:
src/file_compat.h: In function ���FILE* mpl_PyFile_Dup(PyObject*, char*, 
off_t*)���:
src/file_compat.h:66: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:66: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:82: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:82: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:109: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:109: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h: In function ���int mpl_PyFile_DupClose(PyObject*, 
FILE*, off_t)���:
src/file_compat.h:155: warning: deprecated conversion from string 
constant to ���char*���
src/file_compat.h:155: warning: deprecated conversion from string 
constant to ���char*���
src/_backend_agg.cpp: In member function ���Py::Object 
RendererAgg::draw_markers(const Py::Tuple&)���:
src/_backend_agg.cpp:791: warning: dereferencing type-punned pointer 
will break strict-aliasing rules
src/_backend_agg.cpp:791: warning: dereferencing type-punned pointer 
will break strict-aliasing rules
src/_backend_agg.cpp:829: warning: dereferencing type-punned pointer 
will break strict-aliasing rules
src/_backend_agg.cpp:829: warning: dereferencing type-punned pointer 
will break strict-aliasing rules
/usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching 
for -lpthread
/usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc

Installed 
/opt/rh/python33/root/usr/lib/python3.3/site-packages/matplotlib-1.4.3-py3.3-linux-x86_64.egg

Because this distribution was installed --multi-version, before you can
import modules from this package in an application, you will need to
'import pkg_resources' and then use a 'require()' call similar to one of
these examples, in order to select the desired version:

     pkg_resources.require("matplotlib")  # latest installed version
     pkg_resources.require("matplotlib==1.4.3")  # this exact version
     pkg_resources.require("matplotlib>=1.4.3")  # this version or higher

Processing dependencies for matplotlib
Searching for pyparsing>=1.5.6,!=2.0.0
Reading https://pypi.python.org/simple/pyparsing/
Reading http://pyparsing.sourceforge.net/
Reading http://pyparsing.wikispaces.com/
Reading http://sourceforge.net/project/showfiles.php?group_id=97203
Reading http://sourceforge.net/projects/pyparsing
Best match: pyparsing 2.0.3
Downloading 
https://pypi.python.org/packages/source/p/pyparsing/pyparsing-2.0.3.zip#md5=0a5ec41bb650aed802751a311b5d820d 

Processing pyparsing-2.0.3.zip
Writing /tmp/easy_install-8vc0lc/pyparsing-2.0.3/setup.cfg
Running pyparsing-2.0.3/setup.py -q bdist_egg --dist-dir 
/tmp/easy_install-8vc0lc/pyparsing-2.0.3/egg-dist-tmp-bdgu2g
zip_safe flag not set; analyzing archive contents...
__pycache__.pyparsing.cpython-33: module MAY be using inspect.stack

Installed 
/opt/rh/python33/root/usr/lib/python3.3/site-packages/pyparsing-2.0.3-py3.3.egg

Because this distribution was installed --multi-version, before you can
import modules from this package in an application, you will need to
'import pkg_resources' and then use a 'require()' call similar to one of
these examples, in order to select the desired version:

     pkg_resources.require("pyparsing")  # latest installed version
     pkg_resources.require("pyparsing==2.0.3")  # this exact version
     pkg_resources.require("pyparsing>=2.0.3")  # this version or higher

Searching for pytz
Reading https://pypi.python.org/simple/pytz/
Best match: pytz 2015.4
Downloading 
https://pypi.python.org/packages/3.3/p/pytz/pytz-2015.4-py3.3.egg#md5=e21dada2b1eaff746d21b2ac6f76f034 

Processing pytz-2015.4-py3.3.egg
Moving pytz-2015.4-py3.3.egg to 
/opt/rh/python33/root/usr/lib/python3.3/site-packages

Installed 
/opt/rh/python33/root/usr/lib/python3.3/site-packages/pytz-2015.4-py3.3.egg

Because this distribution was installed --multi-version, before you can
import modules from this package in an application, you will need to
'import pkg_resources' and then use a 'require()' call similar to one of
these examples, in order to select the desired version:

     pkg_resources.require("pytz")  # latest installed version
     pkg_resources.require("pytz==2015.4")  # this exact version
     pkg_resources.require("pytz>=2015.4")  # this version or higher

Searching for python-dateutil!=2.1
Reading https://pypi.python.org/simple/python-dateutil/
Reading http://labix.org/python-dateutil
Reading https://dateutil.readthedocs.org
Best match: python-dateutil 2.4.2
Downloading 
https://pypi.python.org/packages/source/p/python-dateutil/python-dateutil-2.4.2.tar.gz#md5=4ef68e1c485b09e9f034e10473e5add2 

Processing python-dateutil-2.4.2.tar.gz
Writing /tmp/easy_install-ugb9nf/python-dateutil-2.4.2/setup.cfg
Running python-dateutil-2.4.2/setup.py -q bdist_egg --dist-dir 
/tmp/easy_install-ugb9nf/python-dateutil-2.4.2/egg-dist-tmp-7bb_lh

Installed 
/opt/rh/python33/root/usr/lib/python3.3/site-packages/python_dateutil-2.4.2-py3.3.egg

Because this distribution was installed --multi-version, before you can
import modules from this package in an application, you will need to
'import pkg_resources' and then use a 'require()' call similar to one of
these examples, in order to select the desired version:

     pkg_resources.require("python-dateutil")  # latest installed version
     pkg_resources.require("python-dateutil==2.4.2")  # this exact version
     pkg_resources.require("python-dateutil>=2.4.2")  # this version or 
higher

Searching for six>=1.4
Reading https://pypi.python.org/simple/six/
Best match: six 1.9.0
Downloading 
https://pypi.python.org/packages/source/s/six/six-1.9.0.tar.gz#md5=476881ef4012262dfc8adc645ee786c4 

Processing six-1.9.0.tar.gz
Writing /tmp/easy_install-5oq3yv/six-1.9.0/setup.cfg
Running six-1.9.0/setup.py -q bdist_egg --dist-dir 
/tmp/easy_install-5oq3yv/six-1.9.0/egg-dist-tmp-q7x1ha
no previously-included directories found matching 'documentation/_build'
zip_safe flag not set; analyzing archive contents...
__pycache__.six.cpython-33: module references __path__

Installed 
/opt/rh/python33/root/usr/lib/python3.3/site-packages/six-1.9.0-py3.3.egg

Because this distribution was installed --multi-version, before you can
import modules from this package in an application, you will need to
'import pkg_resources' and then use a 'require()' call similar to one of
these examples, in order to select the desired version:

     pkg_resources.require("six")  # latest installed version
     pkg_resources.require("six==1.9.0")  # this exact version
     pkg_resources.require("six>=1.9.0")  # this version or higher

*Finished processing dependencies for matplotlib *
************************************************************************************************************** 


Thanks,
Zaiwen

Thank you all.

I am using Python 3.4.3.

I meant to include a pip list:

Assimulo (2.8)
decorator (4.0.2)
gmpy2 (2.0.7)
ipykernel (4.0.3)
ipython (4.0.0)
ipython-genutils (0.1.0)
ipywidgets (4.0.2)
Jinja2 (2.8)
jsonschema (2.5.1)
jupyter-client (4.0.0)
jupyter-core (4.0.4)
MarkupSafe (0.23)
matplotlib (1.4.3)
mistune (0.7.1)
nbconvert (4.0.0)
nbformat (4.0.0)
nose (1.3.7)
notebook (4.0.4)
numpy (1.9.2)
pandas (0.16.2)
path.py (8.1)
pickleshare (0.5)
pip (7.1.2)
Pygments (2.0.2)
pyparsing (2.0.3)
pyreadline (2.0)
python-dateutil (2.4.2)
pytz (2015.4)
pyzmq (14.7.0)
requests (2.7.0)
scipy (0.16.0)
setuptools (18.2)
simplegeneric (0.8.1)
six (1.9.0)
sympy (0.7.6)
testpath (0.2)
tornado (4.2.1)
traitlets (4.0.0)

So, if the program works for Python 2.7 but not 3.4.3, maybe that is the
problem?  Let me try to install Python 2.7 tonight and see what that does.

On Wed, Sep 16, 2015 at 8:39 AM, Sterling Smith <sm...@fu...>
wrote:

> Works fine for
>
> {{{
>  : python
> Python 2.7.10 (default, Sep 15 2015, 11:26:42)
> [GCC 4.2.1 Compatible Apple LLVM 6.0 (clang-600.0.57)] on darwin
> Type "help", "copyright", "credits" or "license" for more information.
> /Users/smithsp/.pyhistory
> >>> import matplotlib
> >>> matplotlib.__version__
> '1.4.3'
> >>> import numpy
> >>> numpy.__version__
> '1.9.2'
> >>> matplotlib.get_backend()
> u’MacOSX'
> }}}
>
> All are obtained through MacPorts on OSX 10.9.5.
>
> -Sterling
>
>
>
> On Sep 16, 2015, at 6:50AM, Benjamin Root <ben...@gm...> wrote:
>
> > Btw, I can't reproduce the problem using matplotlib master, numpy master
> and linux. I know it isn't at all similar to your setup, but it is a data
> point.
> >
> > On Wed, Sep 16, 2015 at 9:43 AM, Benjamin Root <ben...@gm...>
> wrote:
> > What version of numpy do you have installed?
> >
> > On Wed, Sep 16, 2015 at 5:35 AM, Bobby Wilkins <bob...@gm...>
> wrote:
> > OS: Windows 8.1 Pro
> >
> > matplotlib version: 1.4.3
> >
> > where obtained: http://www.lfd.uci.edu/~gohlke/pythonlibs/
> >
> > customizations: none
> >
> > Sample Program: attached py file; this is a Physics homework problem; I
> have the answers I need, but would like to fix the errors to be able to
> label all lines.
> >
> > Debug output in attached output.txt file
> >
> > If you uncomment line 180, the error is reported as if it came from that
> line even though there is no float64 on that line (savefig).  If commented,
> it does not report a line from my .py file...
> >
> > If you make line 170 read as follows, the error goes away:
> >
> > if (maxTerm<32):
> >
> > This suggests to me that the additional labels for the 32, 64, 128, and
> 154 term runs is what is triggering the bug, but I cannot figure out what
> it is.
> >
> > Also, separate note, just about any time I make figures, when closing
> the last figure I get a python.exe app crash and this message:
> >
> > alloc: invalid block: 00000000044E7680: 0 d
> >
> >
> > Thank you for any help,
> > Bobby
> >
> >
> >
> ------------------------------------------------------------------------------
> > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> > Get real-time metrics from all of your servers, apps and tools
> > in one place.
> > SourceForge users - Click here to start your Free Trial of Datadog now!
> > http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> > _______________________________________________
> > Matplotlib-users mailing list
> > Mat...@li...
> > https://lists.sourceforge.net/lists/listinfo/matplotlib-users
> >
> >
> >
> >
> ------------------------------------------------------------------------------
> > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> > Get real-time metrics from all of your servers, apps and tools
> > in one place.
> > SourceForge users - Click here to start your Free Trial of Datadog now!
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140_______________________________________________
> > Matplotlib-users mailing list
> > Mat...@li...
> > https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>

Works fine for

{{{
 : python 
Python 2.7.10 (default, Sep 15 2015, 11:26:42) 
[GCC 4.2.1 Compatible Apple LLVM 6.0 (clang-600.0.57)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
/Users/smithsp/.pyhistory
>>> import matplotlib
>>> matplotlib.__version__
'1.4.3'
>>> import numpy
>>> numpy.__version__
'1.9.2'
>>> matplotlib.get_backend()
u’MacOSX'
}}}

All are obtained through MacPorts on OSX 10.9.5.

-Sterling



On Sep 16, 2015, at 6:50AM, Benjamin Root <ben...@gm...> wrote:

> Btw, I can't reproduce the problem using matplotlib master, numpy master and linux. I know it isn't at all similar to your setup, but it is a data point.
> 
> On Wed, Sep 16, 2015 at 9:43 AM, Benjamin Root <ben...@gm...> wrote:
> What version of numpy do you have installed?
> 
> On Wed, Sep 16, 2015 at 5:35 AM, Bobby Wilkins <bob...@gm...> wrote:
> OS: Windows 8.1 Pro
> 
> matplotlib version: 1.4.3
> 
> where obtained: http://www.lfd.uci.edu/~gohlke/pythonlibs/
> 
> customizations: none
> 
> Sample Program: attached py file; this is a Physics homework problem; I have the answers I need, but would like to fix the errors to be able to label all lines.
> 
> Debug output in attached output.txt file
> 
> If you uncomment line 180, the error is reported as if it came from that line even though there is no float64 on that line (savefig).  If commented, it does not report a line from my .py file...
> 
> If you make line 170 read as follows, the error goes away:
> 
> if (maxTerm<32):
> 
> This suggests to me that the additional labels for the 32, 64, 128, and 154 term runs is what is triggering the bug, but I cannot figure out what it is. 
> 
> Also, separate note, just about any time I make figures, when closing the last figure I get a python.exe app crash and this message:
> 
> alloc: invalid block: 00000000044E7680: 0 d
> 
> 
> Thank you for any help,
> Bobby
> 
> 
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
> 
> 
> 
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140_______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users

Btw, I can't reproduce the problem using matplotlib master, numpy master
and linux. I know it isn't at all similar to your setup, but it is a data
point.

On Wed, Sep 16, 2015 at 9:43 AM, Benjamin Root <ben...@gm...> wrote:

> What version of numpy do you have installed?
>
> On Wed, Sep 16, 2015 at 5:35 AM, Bobby Wilkins <bob...@gm...>
> wrote:
>
>> OS: Windows 8.1 Pro
>>
>> matplotlib version: 1.4.3
>>
>> where obtained: http://www.lfd.uci.edu/~gohlke/pythonlibs/
>>
>> customizations: none
>>
>> Sample Program: attached py file; this is a Physics homework problem; I
>> have the answers I need, but would like to fix the errors to be able to
>> label all lines.
>>
>> Debug output in attached output.txt file
>>
>> If you uncomment line 180, the error is reported as if it came from that
>> line even though there is no float64 on that line (savefig).  If commented,
>> it does not report a line from my .py file...
>>
>> If you make line 170 read as follows, the error goes away:
>>
>> if (maxTerm<32):
>>
>> This suggests to me that the additional labels for the 32, 64, 128, and
>> 154 term runs is what is triggering the bug, but I cannot figure out what
>> it is.
>>
>> Also, separate note, just about any time I make figures, when closing the
>> last figure I get a python.exe app crash and this message:
>>
>> alloc: invalid block: 00000000044E7680: 0 d
>>
>>
>> Thank you for any help,
>> Bobby
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>> Get real-time metrics from all of your servers, apps and tools
>> in one place.
>> SourceForge users - Click here to start your Free Trial of Datadog now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>> _______________________________________________
>> Matplotlib-users mailing list
>> Mat...@li...
>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>
>>
>

What version of numpy do you have installed?

On Wed, Sep 16, 2015 at 5:35 AM, Bobby Wilkins <bob...@gm...>
wrote:

> OS: Windows 8.1 Pro
>
> matplotlib version: 1.4.3
>
> where obtained: http://www.lfd.uci.edu/~gohlke/pythonlibs/
>
> customizations: none
>
> Sample Program: attached py file; this is a Physics homework problem; I
> have the answers I need, but would like to fix the errors to be able to
> label all lines.
>
> Debug output in attached output.txt file
>
> If you uncomment line 180, the error is reported as if it came from that
> line even though there is no float64 on that line (savefig).  If commented,
> it does not report a line from my .py file...
>
> If you make line 170 read as follows, the error goes away:
>
> if (maxTerm<32):
>
> This suggests to me that the additional labels for the 32, 64, 128, and
> 154 term runs is what is triggering the bug, but I cannot figure out what
> it is.
>
> Also, separate note, just about any time I make figures, when closing the
> last figure I get a python.exe app crash and this message:
>
> alloc: invalid block: 00000000044E7680: 0 d
>
>
> Thank you for any help,
> Bobby
>
>
>
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>

OS: Windows 8.1 Pro

matplotlib version: 1.4.3

where obtained: http://www.lfd.uci.edu/~gohlke/pythonlibs/

customizations: none

Sample Program: attached py file; this is a Physics homework problem; I
have the answers I need, but would like to fix the errors to be able to
label all lines.

Debug output in attached output.txt file

If you uncomment line 180, the error is reported as if it came from that
line even though there is no float64 on that line (savefig).  If commented,
it does not report a line from my .py file...

If you make line 170 read as follows, the error goes away:

if (maxTerm<32):

This suggests to me that the additional labels for the 32, 64, 128, and 154
term runs is what is triggering the bug, but I cannot figure out what it
is.

Also, separate note, just about any time I make figures, when closing the
last figure I get a python.exe app crash and this message:

alloc: invalid block: 00000000044E7680: 0 d


Thank you for any help,
Bobby