arduino · per1234 · Jan 23, 2024 · Jan 19, 2024 · Jan 19, 2024 · Jan 19, 2024
diff --git a/.DS_Store b/.DS_Store
diff --git a/examples/01.Basics/AnalogReadSerial/AnalogReadSerial.ino b/examples/01.Basics/AnalogReadSerial/AnalogReadSerial.ino
@@ -7,7 +7,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/AnalogReadSerial
+  https://docs.arduino.cc/built-in-examples/basics/AnalogReadSerial/
 */
 
 // the setup routine runs once when you press reset:

diff --git a/examples/01.Basics/Blink/Blink.ino b/examples/01.Basics/Blink/Blink.ino
@@ -8,7 +8,7 @@
   the correct LED pin independent of which board is used.
   If you want to know what pin the on-board LED is connected to on your Arduino
   model, check the Technical Specs of your board at:
-  https://www.arduino.cc/en/Main/Products
+  https://docs.arduino.cc/hardware/
 
   modified 8 May 2014
   by Scott Fitzgerald
@@ -19,7 +19,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
+  https://docs.arduino.cc/built-in-examples/basics/Blink/
 */
 
 // the setup function runs once when you press reset or power the board

diff --git a/examples/01.Basics/DigitalReadSerial/DigitalReadSerial.ino b/examples/01.Basics/DigitalReadSerial/DigitalReadSerial.ino
@@ -5,7 +5,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/DigitalReadSerial
+  https://docs.arduino.cc/built-in-examples/basics/DigitalReadSerial/
 */
 
 // digital pin 2 has a pushbutton attached to it. Give it a name:

diff --git a/examples/01.Basics/Fade/Fade.ino b/examples/01.Basics/Fade/Fade.ino
@@ -10,7 +10,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Fade
+  https://docs.arduino.cc/built-in-examples/basics/Fade/
 */
 
 int led = 9;         // the PWM pin the LED is attached to

diff --git a/examples/01.Basics/ReadAnalogVoltage/ReadAnalogVoltage.ino b/examples/01.Basics/ReadAnalogVoltage/ReadAnalogVoltage.ino
@@ -7,7 +7,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ReadAnalogVoltage
+  https://docs.arduino.cc/built-in-examples/basics/ReadAnalogVoltage/
 */
 
 // the setup routine runs once when you press reset:

diff --git a/examples/02.Digital/BlinkWithoutDelay/BlinkWithoutDelay.ino b/examples/02.Digital/BlinkWithoutDelay/BlinkWithoutDelay.ino
@@ -12,7 +12,7 @@
     is set to the correct LED pin independent of which board is used.
     If you want to know what pin the on-board LED is connected to on your
     Arduino model, check the Technical Specs of your board at:
-    https://www.arduino.cc/en/Main/Products
+    https://docs.arduino.cc/hardware/
 
   created 2005
   by David A. Mellis
@@ -25,7 +25,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/BlinkWithoutDelay
+  https://docs.arduino.cc/built-in-examples/digital/BlinkWithoutDelay/
 */
 
 // constants won't change. Used here to set a pin number:

diff --git a/examples/02.Digital/Button/Button.ino b/examples/02.Digital/Button/Button.ino
@@ -19,7 +19,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Button
+  https://docs.arduino.cc/built-in-examples/digital/Button/
 */
 
 // constants won't change. They're used here to set pin numbers:

diff --git a/examples/02.Digital/Debounce/Debounce.ino b/examples/02.Digital/Debounce/Debounce.ino
@@ -24,7 +24,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Debounce
+  https://docs.arduino.cc/built-in-examples/digital/Debounce/
 */
 
 // constants won't change. They're used here to set pin numbers:

diff --git a/examples/02.Digital/DigitalInputPullup/DigitalInputPullup.ino b/examples/02.Digital/DigitalInputPullup/DigitalInputPullup.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/InputPullupSerial
+  https://docs.arduino.cc/built-in-examples/digital/InputPullupSerial/
 */
 
 void setup() {

diff --git a/examples/02.Digital/StateChangeDetection/StateChangeDetection.ino b/examples/02.Digital/StateChangeDetection/StateChangeDetection.ino
@@ -21,7 +21,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StateChangeDetection
+  https://docs.arduino.cc/built-in-examples/digital/StateChangeDetection/
 */
 
 // this constant won't change:

diff --git a/examples/02.Digital/toneKeyboard/toneKeyboard.ino b/examples/02.Digital/toneKeyboard/toneKeyboard.ino
@@ -14,7 +14,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/toneKeyboard
+  https://docs.arduino.cc/built-in-examples/digital/toneKeyboard/
 */
 
 #include "pitches.h"

diff --git a/examples/02.Digital/toneMelody/toneMelody.ino b/examples/02.Digital/toneMelody/toneMelody.ino
@@ -12,7 +12,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/toneMelody
+  https://docs.arduino.cc/built-in-examples/digital/toneMelody/
 */
 
 #include "pitches.h"

diff --git a/examples/02.Digital/toneMultiple/toneMultiple.ino b/examples/02.Digital/toneMultiple/toneMultiple.ino
@@ -12,7 +12,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/toneMultiple
+  https://docs.arduino.cc/built-in-examples/digital/toneMultiple/
 */
 
 void setup() {

diff --git a/examples/02.Digital/tonePitchFollower/tonePitchFollower.ino b/examples/02.Digital/tonePitchFollower/tonePitchFollower.ino
@@ -14,7 +14,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/tonePitchFollower
+  https://docs.arduino.cc/built-in-examples/digital/tonePitchFollower/
 */
 
 void setup() {

diff --git a/examples/03.Analog/AnalogInOutSerial/AnalogInOutSerial.ino b/examples/03.Analog/AnalogInOutSerial/AnalogInOutSerial.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/AnalogInOutSerial
+  https://docs.arduino.cc/built-in-examples/analog/AnalogInOutSerial/
 */
 
 // These constants won't change. They're used to give names to the pins used:

diff --git a/examples/03.Analog/AnalogInput/AnalogInput.ino b/examples/03.Analog/AnalogInput/AnalogInput.ino
@@ -24,7 +24,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/AnalogInput
+  https://docs.arduino.cc/built-in-examples/analog/AnalogInput/
 */
 
 int sensorPin = A0;   // select the input pin for the potentiometer

diff --git a/examples/03.Analog/AnalogWriteMega/AnalogWriteMega.ino b/examples/03.Analog/AnalogWriteMega/AnalogWriteMega.ino
@@ -12,7 +12,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/AnalogWriteMega
+  https://docs.arduino.cc/built-in-examples/analog/AnalogWriteMega/
 */
 
 // These constants won't change. They're used to give names to the pins used:

diff --git a/examples/03.Analog/Calibration/Calibration.ino b/examples/03.Analog/Calibration/Calibration.ino
@@ -23,7 +23,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Calibration
+  https://docs.arduino.cc/built-in-examples/analog/Calibration/
 */
 
 // These constants won't change:

diff --git a/examples/03.Analog/Fading/Fading.ino b/examples/03.Analog/Fading/Fading.ino
@@ -13,7 +13,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Fading
+  https://docs.arduino.cc/built-in-examples/analog/Fading/
 */
 
 int ledPin = 9;  // LED connected to digital pin 9

diff --git a/examples/03.Analog/Smoothing/Smoothing.ino b/examples/03.Analog/Smoothing/Smoothing.ino
@@ -15,7 +15,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Smoothing
+  https://docs.arduino.cc/built-in-examples/analog/Smoothing/
 */
 
 // Define the number of samples to keep track of. The higher the number, the

diff --git a/examples/04.Communication/ASCIITable/ASCIITable.ino b/examples/04.Communication/ASCIITable/ASCIITable.ino
@@ -16,7 +16,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ASCIITable
+  https://docs.arduino.cc/built-in-examples/communication/ASCIITable/
 */
 
 void setup() {

diff --git a/examples/04.Communication/Dimmer/Dimmer.ino b/examples/04.Communication/Dimmer/Dimmer.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Dimmer
+  https://docs.arduino.cc/built-in-examples/communication/Dimmer/
 */
 
 const int ledPin = 9;  // the pin that the LED is attached to

diff --git a/examples/04.Communication/Graph/Graph.ino b/examples/04.Communication/Graph/Graph.ino
@@ -22,7 +22,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Graph
+  https://docs.arduino.cc/built-in-examples/communication/Graph/
 */
 
 void setup() {

diff --git a/examples/04.Communication/Midi/Midi.ino b/examples/04.Communication/Midi/Midi.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Midi
+  https://docs.arduino.cc/built-in-examples/communication/Midi/
 */
 
 void setup() {

diff --git a/examples/04.Communication/MultiSerial/MultiSerial.ino b/examples/04.Communication/MultiSerial/MultiSerial.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/MultiSerialMega
+  https://docs.arduino.cc/built-in-examples/communication/MultiSerialMega/
 */
 
 

diff --git a/examples/04.Communication/PhysicalPixel/PhysicalPixel.ino b/examples/04.Communication/PhysicalPixel/PhysicalPixel.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/PhysicalPixel
+  https://docs.arduino.cc/built-in-examples/communication/PhysicalPixel/
 */
 
 const int ledPin = 13;  // the pin that the LED is attached to

diff --git a/examples/04.Communication/ReadASCIIString/ReadASCIIString.ino b/examples/04.Communication/ReadASCIIString/ReadASCIIString.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ReadASCIIString
+  https://docs.arduino.cc/built-in-examples/communication/ReadASCIIString/
 */
 
 // pins for the LEDs:

diff --git a/examples/04.Communication/SerialCallResponse/SerialCallResponse.ino b/examples/04.Communication/SerialCallResponse/SerialCallResponse.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/SerialCallResponse
+  https://docs.arduino.cc/built-in-examples/communication/SerialCallResponse/
 */
 
 int firstSensor = 0;   // first analog sensor

diff --git a/examples/04.Communication/SerialCallResponseASCII/SerialCallResponseASCII.ino b/examples/04.Communication/SerialCallResponseASCII/SerialCallResponseASCII.ino
@@ -19,7 +19,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/SerialCallResponseASCII
+  https://docs.arduino.cc/built-in-examples/communication/SerialCallResponseASCII/
 */
 
 int firstSensor = 0;   // first analog sensor

diff --git a/examples/04.Communication/SerialEvent/SerialEvent.ino b/examples/04.Communication/SerialEvent/SerialEvent.ino
@@ -15,7 +15,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/SerialEvent
+  https://docs.arduino.cc/built-in-examples/communication/SerialEvent/
 */
 
 String inputString = "";      // a String to hold incoming data

diff --git a/examples/04.Communication/SerialPassthrough/SerialPassthrough.ino b/examples/04.Communication/SerialPassthrough/SerialPassthrough.ino
@@ -21,7 +21,7 @@
   created 23 May 2016
   by Erik Nyquist
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/SerialPassthrough
+  https://docs.arduino.cc/built-in-examples/communication/SerialPassthrough/
 */
 
 void setup() {

diff --git a/examples/04.Communication/VirtualColorMixer/VirtualColorMixer.ino b/examples/04.Communication/VirtualColorMixer/VirtualColorMixer.ino
@@ -13,7 +13,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/VirtualColorMixer
+  https://docs.arduino.cc/built-in-examples/communication/VirtualColorMixer/
 */
 
 const int redPin = A0;    // sensor to control red color

diff --git a/examples/05.Control/Arrays/Arrays.ino b/examples/05.Control/Arrays/Arrays.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Arrays
+  https://docs.arduino.cc/built-in-examples/control-structures/Arrays/
 */
 
 int timer = 100;  // The higher the number, the slower the timing.

diff --git a/examples/05.Control/ForLoopIteration/ForLoopIteration.ino b/examples/05.Control/ForLoopIteration/ForLoopIteration.ino
@@ -14,7 +14,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ForLoopIteration
+  https://docs.arduino.cc/built-in-examples/control-structures/ForLoopIteration/
 */
 
 int timer = 100;  // The higher the number, the slower the timing.

diff --git a/examples/05.Control/IfStatementConditional/IfStatementConditional.ino b/examples/05.Control/IfStatementConditional/IfStatementConditional.ino
@@ -21,7 +21,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ifStatementConditional
+  https://docs.arduino.cc/built-in-examples/control-structures/ifStatementConditional/
 */
 
 // These constants won't change:

diff --git a/examples/05.Control/WhileStatementConditional/WhileStatementConditional.ino b/examples/05.Control/WhileStatementConditional/WhileStatementConditional.ino
@@ -24,7 +24,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/WhileStatementConditional
+  https://docs.arduino.cc/built-in-examples/control-structures/WhileStatementConditional/
 */
 
 

diff --git a/examples/05.Control/switchCase/switchCase.ino b/examples/05.Control/switchCase/switchCase.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/SwitchCase
+  https://docs.arduino.cc/built-in-examples/control-structures/SwitchCase/
 */
 
 // these constants won't change. They are the lowest and highest readings you

diff --git a/examples/05.Control/switchCase2/switchCase2.ino b/examples/05.Control/switchCase2/switchCase2.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/SwitchCase2
+  https://docs.arduino.cc/built-in-examples/control-structures/SwitchCase2/
 */
 
 void setup() {

diff --git a/examples/06.Sensors/ADXL3xx/ADXL3xx.ino b/examples/06.Sensors/ADXL3xx/ADXL3xx.ino
@@ -21,7 +21,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ADXL3xx
+  https://docs.arduino.cc/built-in-examples/sensors/ADXL3xx/
 */
 
 // these constants describe the pins. They won't change:

diff --git a/examples/06.Sensors/Knock/Knock.ino b/examples/06.Sensors/Knock/Knock.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Knock
+  https://docs.arduino.cc/built-in-examples/sensors/Knock/
 */
 
 

diff --git a/examples/06.Sensors/Memsic2125/Memsic2125.ino b/examples/06.Sensors/Memsic2125/Memsic2125.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Memsic2125
+  https://docs.arduino.cc/built-in-examples/sensors/Memsic2125/
 */
 
 // these constants won't change:

diff --git a/examples/06.Sensors/Ping/Ping.ino b/examples/06.Sensors/Ping/Ping.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Ping
+  https://docs.arduino.cc/built-in-examples/sensors/Ping/
 */
 
 // this constant won't change. It's the pin number of the sensor's output:

diff --git a/examples/07.Display/RowColumnScanning/RowColumnScanning.ino b/examples/07.Display/RowColumnScanning/RowColumnScanning.ino
@@ -28,7 +28,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/RowColumnScanning
+  https://docs.arduino.cc/built-in-examples/display/RowColumnScanning/
 */
 
 // 2-dimensional array of row pin numbers:

diff --git a/examples/07.Display/barGraph/barGraph.ino b/examples/07.Display/barGraph/barGraph.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/BarGraph
+  https://docs.arduino.cc/built-in-examples/display/BarGraph/
 */
 
 // these constants won't change:

diff --git a/examples/08.Strings/CharacterAnalysis/CharacterAnalysis.ino b/examples/08.Strings/CharacterAnalysis/CharacterAnalysis.ino
@@ -10,7 +10,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/CharacterAnalysis
+  https://docs.arduino.cc/built-in-examples/strings/CharacterAnalysis/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringAdditionOperator/StringAdditionOperator.ino b/examples/08.Strings/StringAdditionOperator/StringAdditionOperator.ino
@@ -10,7 +10,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringAdditionOperator
+  https://docs.arduino.cc/built-in-examples/strings/StringAdditionOperator/
 */
 
 // declare three Strings:

diff --git a/examples/08.Strings/StringAppendOperator/StringAppendOperator.ino b/examples/08.Strings/StringAppendOperator/StringAppendOperator.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringAppendOperator
+  https://docs.arduino.cc/built-in-examples/strings/StringAppendOperator/
 */
 
 String stringOne, stringTwo;

diff --git a/examples/08.Strings/StringCaseChanges/StringCaseChanges.ino b/examples/08.Strings/StringCaseChanges/StringCaseChanges.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringCaseChanges
+  https://docs.arduino.cc/built-in-examples/strings/StringCaseChanges/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringCharacters/StringCharacters.ino b/examples/08.Strings/StringCharacters/StringCharacters.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringCharacters
+  https://docs.arduino.cc/built-in-examples/strings/StringCharacters/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringComparisonOperators/StringComparisonOperators.ino b/examples/08.Strings/StringComparisonOperators/StringComparisonOperators.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringComparisonOperators
+  https://docs.arduino.cc/built-in-examples/strings/StringComparisonOperators/
 */
 
 String stringOne, stringTwo;

diff --git a/examples/08.Strings/StringConstructors/StringConstructors.ino b/examples/08.Strings/StringConstructors/StringConstructors.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringConstructors
+  https://docs.arduino.cc/built-in-examples/strings/StringConstructors/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringIndexOf/StringIndexOf.ino b/examples/08.Strings/StringIndexOf/StringIndexOf.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringIndexOf
+  https://docs.arduino.cc/built-in-examples/strings/StringIndexOf/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringLength/StringLength.ino b/examples/08.Strings/StringLength/StringLength.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringLengthTrim
+  https://docs.arduino.cc/built-in-examples/strings/StringLengthTrim/
 */
 
 String txtMsg = "";                               // a string for incoming text

diff --git a/examples/08.Strings/StringLengthTrim/StringLengthTrim.ino b/examples/08.Strings/StringLengthTrim/StringLengthTrim.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringLengthTrim
+  https://docs.arduino.cc/built-in-examples/strings/StringLengthTrim/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringReplace/StringReplace.ino b/examples/08.Strings/StringReplace/StringReplace.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringReplace
+  https://docs.arduino.cc/built-in-examples/strings/StringReplace/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringStartsWithEndsWith/StringStartsWithEndsWith.ino b/examples/08.Strings/StringStartsWithEndsWith/StringStartsWithEndsWith.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringStartsWithEndsWith
+  https://docs.arduino.cc/built-in-examples/strings/StringStartsWithEndsWith/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringSubstring/StringSubstring.ino b/examples/08.Strings/StringSubstring/StringSubstring.ino
@@ -9,7 +9,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringSubstring
+  https://docs.arduino.cc/built-in-examples/strings/StringSubstring/
 */
 
 void setup() {

diff --git a/examples/08.Strings/StringToInt/StringToInt.ino b/examples/08.Strings/StringToInt/StringToInt.ino
@@ -12,7 +12,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/StringToInt
+  https://docs.arduino.cc/built-in-examples/strings/StringToInt/
 */
 
 String inString = "";  // string to hold input

diff --git a/examples/09.USB/Keyboard/KeyboardLogout/KeyboardLogout.ino b/examples/09.USB/Keyboard/KeyboardLogout/KeyboardLogout.ino
@@ -22,7 +22,7 @@
 
   This example is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/KeyboardLogout
+  https://docs.arduino.cc/built-in-examples/usb/KeyboardLogout/
 */
 
 #define OSX 0

diff --git a/examples/09.USB/Keyboard/KeyboardMessage/KeyboardMessage.ino b/examples/09.USB/Keyboard/KeyboardMessage/KeyboardMessage.ino
@@ -17,7 +17,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/KeyboardMessage
+  https://docs.arduino.cc/built-in-examples/usb/KeyboardMessage/
 */
 
 #include "Keyboard.h"

diff --git a/examples/09.USB/Keyboard/KeyboardReprogram/KeyboardReprogram.ino b/examples/09.USB/Keyboard/KeyboardReprogram/KeyboardReprogram.ino
@@ -22,7 +22,7 @@
 
   This example is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/KeyboardReprogram
+  https://docs.arduino.cc/built-in-examples/usb/KeyboardReprogram/
 */
 
 #include "Keyboard.h"

diff --git a/examples/09.USB/Keyboard/KeyboardSerial/KeyboardSerial.ino b/examples/09.USB/Keyboard/KeyboardSerial/KeyboardSerial.ino
@@ -16,7 +16,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/KeyboardSerial
+  https://docs.arduino.cc/built-in-examples/usb/KeyboardSerial/
 */
 
 #include "Keyboard.h"

diff --git a/examples/09.USB/KeyboardAndMouseControl/KeyboardAndMouseControl.ino b/examples/09.USB/KeyboardAndMouseControl/KeyboardAndMouseControl.ino
@@ -18,7 +18,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/KeyboardAndMouseControl
+  https://docs.arduino.cc/built-in-examples/usb/KeyboardAndMouseControl/
 */
 
 #include "Keyboard.h"

diff --git a/examples/09.USB/Mouse/ButtonMouseControl/ButtonMouseControl.ino b/examples/09.USB/Mouse/ButtonMouseControl/ButtonMouseControl.ino
@@ -20,7 +20,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ButtonMouseControl
+  https://docs.arduino.cc/built-in-examples/usb/ButtonMouseControl/
 */
 
 #include "Mouse.h"

diff --git a/examples/09.USB/Mouse/JoystickMouseControl/JoystickMouseControl.ino b/examples/09.USB/Mouse/JoystickMouseControl/JoystickMouseControl.ino
@@ -26,7 +26,7 @@
 
   This example code is in the public domain.
 
-  https://www.arduino.cc/en/Tutorial/BuiltInExamples/JoystickMouseControl
+  https://docs.arduino.cc/built-in-examples/usb/JoystickMouseControl/
 */
 
 #include "Mouse.h"