| Age | Commit message (Collapse) | Author |
|---|
|
The affected functions are: bsearch, memcmp, memcpy, memset, memmove,
qsort, repalloc
Reviewed-by: Corey Huinker <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/fd9adf5d-b1aa-e82f-e4c7-263c30145807%40enterprisedb.com
|
|
Like the implementation for node copy, write and read, this node
requires a custom implementation so as the query jumbling is able to
consider the correct value assigned to it, depending on its type (int,
float, bool, string, bitstring).
Based on a dump of pg_stat_statements from the regression database, this
would confuse the query jumbling of the following queries:
- SET.
- COPY TO with SELECT queries.
- START TRANSACTION with different isolation levels.
- ALTER TABLE with default expressions.
- CREATE TABLE with partition bounds.
Note that there may be a long-term argument in tracking the location of
such nodes so as query strings holding such nodes could be normalized,
but this is left as a separate discussion.
Oversight in 3db72eb.
Discussion: https://postgr.es/m/[email protected]
|
|
Some of these appear to be leftovers from when hash_search() took a
char * argument (changed in 5999e78fc45dcb91784b64b6e9ae43f4e4f68ca2).
Since after this there is some more horizontal space available, do
some light reformatting where suitable.
Reviewed-by: Corey Huinker <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/fd9adf5d-b1aa-e82f-e4c7-263c30145807%40enterprisedb.com
|
|
Thanks to Robins to find the issue and Nathan for promptly writing a test case
to prevent future problems like this.
Reported-by: Nathan Bossart <[email protected]>
Reported-by: Robins Tharakan <[email protected]>
Author: Nathan Bossart <[email protected]>
Discussion: https://postgr.es/m/20230130193008.GA2740781@nathanxps13
|
|
This commit changes the query jumbling code in queryjumblefuncs.c to be
generated automatically based on the information of the nodes in the
headers of src/include/nodes/ by using gen_node_support.pl. This
approach offers many advantages:
- Support for query jumbling for all the utility statements, based on the
state of their parsed Nodes and not only their query string. This will
greatly ease the switch to normalize the information of some DDLs, like
SET or CALL for example (this is left unchanged and should be part of a
separate discussion). With this feature, the number of entries stored
for utilities in pg_stat_statements is reduced (for example now
"CHECKPOINT" and "checkpoint" mean the same thing with the same query
ID).
- Documentation of query jumbling directly in the structure definition
of the nodes. Since this code has been introduced in pg_stat_statements
and then moved to code, the reasons behind the choices of what should be
included in the jumble are rather sparse. Note that some explanation is
added for the most relevant parts, as a start.
- Overall code reduction and more consistency with the other parts
generating read, write and copy depending on the nodes.
The query jumbling is controlled by a couple of new node attributes,
documented in nodes/nodes.h:
- custom_query_jumble, to mark a Node as having a custom
implementation.
- no_query_jumble, to ignore entirely a Node.
- query_jumble_ignore, to ignore a field in a Node.
- query_jumble_location, to mark a location in a Node, for
normalization. This can apply only to int fields, with "location" in
their name (only Const as of this commit).
There should be no compatibility impact on pg_stat_statements, as the
new code applies the jumbling to the same fields for each node (its
regression tests have no modification, for one).
Some benchmark of the query jumbling between HEAD and this commit for
SELECT and DMLs has proved that this new code does not cause a
performance regression, with computation times close for both methods.
For utility queries, the new method is slower than the previous method
of calculating a hash of the query string, though we are talking about
extra ns-level changes based on what I measured, which is unnoticeable
even for OLTP workloads as a query ID is calculated once per query
post-parse analysis.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/[email protected]
|
|
EquivalenceClasses are now understood as applying within a "join
domain", which is a set of inner-joined relations (possibly underneath
an outer join). We no longer need to treat an EC from below an outer
join as a second-class citizen.
I have hopes of eventually being able to treat outer-join clauses via
EquivalenceClasses, by means of only applying deductions within the
EC's join domain. There are still problems in the way of that, though,
so for now the reconsider_outer_join_clause logic is still here.
I haven't been able to get rid of RestrictInfo.is_pushed_down either,
but I wonder if that could be recast using JoinDomains.
I had to hack one test case in postgres_fdw.sql to make it still test
what it was meant to, because postgres_fdw is inconsistent about
how it deals with quals containing non-shippable expressions; see
https://postgr.es/m/[email protected]. That should
be improved, but I don't think it's within the scope of this patch
series.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/[email protected]
|
|
Remove RestrictInfo.nullable_relids, along with a good deal of
infrastructure that calculated it. One use-case for it was in
join_clause_is_movable_to, but we can now replace that usage with
a check to see if the clause's relids include any outer join
that can null the target relation. The other use-case was in
join_clause_is_movable_into, but that test can just be dropped
entirely now that the clause's relids include outer joins.
Furthermore, join_clause_is_movable_into should now be
accurate enough that it will accept anything returned by
generate_join_implied_equalities, so we can restore the Assert
that was diked out in commit 95f4e59c3.
Remove the outerjoin_delayed mechanism. We needed this before to
prevent quals from getting evaluated below outer joins that should
null some of their vars. Now that we consider varnullingrels while
placing quals, that's taken care of automatically, so throw the
whole thing away.
Teach remove_useless_result_rtes to also remove useless FromExprs.
Having done that, the delay_upper_joins flag serves no purpose any
more and we can remove it, largely reverting 11086f2f2.
Use constant TRUE for "dummy" clauses when throwing back outer joins.
This improves on a hack I introduced in commit 6a6522529. If we
have a left-join clause l.x = r.y, and a WHERE clause l.x = constant,
we generate r.y = constant and then don't really have a need for the
join clause. But we must throw the join clause back anyway after
marking it redundant, so that the join search heuristics won't think
this is a clauseless join and avoid it. That was a kluge introduced
under time pressure, and after looking at it I thought of a better
way: let's just introduce constant-TRUE "join clauses" instead,
and get rid of them at the end. This improves the generated plans for
such cases by not having to test a redundant join clause. We can also
get rid of the ugly hack used to mark such clauses as redundant for
selectivity estimation.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/[email protected]
|
|
Traditionally we used the same Var struct to represent the value
of a table column everywhere in parse and plan trees. This choice
predates our support for SQL outer joins, and it's really a pretty
bad idea with outer joins, because the Var's value can depend on
where it is in the tree: it might go to NULL above an outer join.
So expression nodes that are equal() per equalfuncs.c might not
represent the same value, which is a huge correctness hazard for
the planner.
To improve this, decorate Var nodes with a bitmapset showing
which outer joins (identified by RTE indexes) may have nulled
them at the point in the parse tree where the Var appears.
This allows us to trust that equal() Vars represent the same value.
A certain amount of klugery is still needed to cope with cases
where we re-order two outer joins, but it's possible to make it
work without sacrificing that core principle. PlaceHolderVars
receive similar decoration for the same reason.
In the planner, we include these outer join bitmapsets into the relids
that an expression is considered to depend on, and in consequence also
add outer-join relids to the relids of join RelOptInfos. This allows
us to correctly perceive whether an expression can be calculated above
or below a particular outer join.
This change affects FDWs that want to plan foreign joins. They *must*
follow suit when labeling foreign joins in order to match with the
core planner, but for many purposes (if postgres_fdw is any guide)
they'd prefer to consider only base relations within the join.
To support both requirements, redefine ForeignScan.fs_relids as
base+OJ relids, and add a new field fs_base_relids that's set up by
the core planner.
Large though it is, this commit just does the minimum necessary to
install the new mechanisms and get check-world passing again.
Follow-up patches will perform some cleanup. (The README additions
and comments mention some stuff that will appear in the follow-up.)
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/[email protected]
|
|
"postgres" has long been officially preferred over "postmaster" as the
name of the program to invoke to run the server. Some example scripts
and code comments still used the latter. Change those.
Discussion: https://www.postgresql.org/message-id/flat/[email protected]
|
|
When auto_explain.log_verbose is on, auto_explain should print in the
logs plans equivalent to the EXPLAIN (VERBOSE). However, when
compute_query_id is on, query identifiers were not showing up, being
only handled by EXPLAIN (VERBOSE). This brings auto_explain on par with
EXPLAIN regarding that. Note that like EXPLAIN, auto_explain does not
show the query identifier when compute_query_id=regress.
The change is done so as the choice of printing the query identifier is
done in ExplainPrintPlan() rather than in ExplainOnePlan(), to avoid a
duplication of the logic dealing with the query ID. auto_explain is the
only in-core caller of ExplainPrintPlan().
While looking at the area, I have noticed that more consolidation
between EXPLAIN and auto_explain would be in order for the logging of
the plan duration and the buffer usage. This refactoring is left as a
future change.
Author: Atsushi Torikoshi
Reviewed-by: Justin Pryzby, Julien Rouhaud
Discussion: https://postgr.es/m/[email protected]
|
|
This reverts commit 0ad3c60, as per feedback from Tom Lane, Robert Haas
and Andres Freund. The new name used for the module had little
support.
This moves back to basic_archive as module name, and we will likely use
that as template for recovery modules, as well.
Discussion: https://postgr.es/m/CA+TgmoYG5uGOp7DGFT5gzC1kKFWGjkLSj_wOQxGhfMcvVEiKGA@mail.gmail.com
|
|
This rename is in preparation for the introduction of recovery modules,
where basic_wal_module will be used as a base template for the set of
callbacks introduced. The former name did not really reflect all that.
Author: Nathan Bossart
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
|
|
Until now dblink and postgres_fdw did not process interrupts during connection
establishment. Besides preventing query cancellations etc, this can lead to
undetected deadlocks, as global barriers are not processed.
These aforementioned undetected deadlocks are the reason for the spate of CI
test failures in the FreeBSD 'test_running' step.
Fix the bug by using the helper from libpq-be-fe-helpers.h, introduced in a
prior commit. Besides fixing the bug, this also removes duplicated code
around reserving file descriptors.
As the change is relatively large and there are no field reports of the
problem, don't backpatch for now.
Reviewed-by: Thomas Munro <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Backpatch:
|
|
This function is able to extract the full page images from a range of
records, specified as of input arguments start_lsn and end_lsn. Like
the other functions of this module, an error is returned if using LSNs
that do not reflect real system values. All the FPIs stored in a single
record are extracted.
The module's version is bumped to 1.1.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CALj2ACVCcvzd7WiWvD=6_7NBvVB_r6G0EGSxL4F8vosAi6Se4g@mail.gmail.com
|
|
This will ease a follow-up move that will generate automatically this
code. The C file is renamed, for consistency with the node-related
files whose code are generated by gen_node_support.pl:
- queryjumble.c -> queryjumblefuncs.c
- utils/queryjumble.h -> nodes/queryjumble.h
Per a suggestion from Peter Eisentraut.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/[email protected]
|
|
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
This is a second attempt at committing 1b4d280ea. The difference
from the first time is that now we can add some filtering rules to
AdjustUpgrade.pm to allow cross-version upgrade testing to pass
despite all the cosmetic changes in CREATE VIEW outputs.
Amit Langote (filtering rules by me)
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
Discussion: https://postgr.es/m/[email protected]
|
|
Avoid explicitly grouping by columns that we know are redundant
for sorting, for example we need group by only one of x and y in
SELECT ... WHERE x = y GROUP BY x, y
This comes up more often than you might think, as shown by the
changes in the regression tests. It's nearly free to detect too,
since we are just piggybacking on the existing logic that detects
redundant pathkeys. (In some of the existing plans that change,
it's visible that a sort step preceding the grouping step already
didn't bother to sort by the redundant column, making the old plan
a bit silly-looking.)
To do this, build processed_groupClause and processed_distinctClause
lists that omit any provably-redundant sort items, and consult those
not the originals where relevant. This means that within the
planner, one should usually consult root->processed_groupClause or
root->processed_distinctClause if one wants to know which columns
are to be grouped on; but to check whether grouping or distinct-ing
is happening at all, check non-NIL-ness of parse->groupClause or
parse->distinctClause. This is comparable to longstanding rules
about handling the HAVING clause, so I don't think it'll be a huge
maintenance problem.
nodeAgg.c also needs minor mods, because it's now possible to generate
AGG_PLAIN and AGG_SORTED Agg nodes with zero grouping columns.
Patch by me; thanks to Richard Guo and David Rowley for review.
Discussion: https://postgr.es/m/[email protected]
|
|
This makes sure that the internal logic of these functions does not
attempt to change the value of the arguments constified, and it removes
one unconstify() in basic_archive.c.
Author: Nathan Bossart
Reviewed-by: Andrew Dunstan, Peter Eisentraut
Discussion: https://postgr.es/m/20230114231126.GA2580330@nathanxps13
|
|
It's likely worth adding some automated way of preventing further
omissions. We're discussing how to best do that.
Reported-by: Justin Pryzby <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
This reverts commit 1b4d280ea1eb7ddb2e16654d5fa16960bb959566.
It's broken the buildfarm members that run cross-version-upgrade tests,
because they're not prepared to deal with cosmetic differences between
CREATE VIEW commands emitted by older servers and HEAD. Even if we had
a solution to that, which we don't, it'd take some time to roll it out
to the affected animals. This improvement isn't valuable enough to
justify addressing that problem on an emergency basis, so revert it
for now.
|
|
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
|
|
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
|
|
This new header contains all the variable-length data types support
(TOAST support) from postgres.h, which isn't needed by large parts of
the backend code.
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/ddcce239-0f29-6e62-4b47-1f8ca742addf%40enterprisedb.com
|
|
|
|
Check the remote relkind before trying to use TABLESAMPLE to acquire
sample from the remote relation. Even if the remote server version has
TABLESAMPLE support, the foreign table may point to incompatible relkind
(e.g. a view or a sequence).
If the relkind does not support TABLESAMPLE, error out if TABLESAMPLE
was requested specifically (as system/bernoulli), or fallback to random
just like we do for old server versions.
We currently end up disabling sampling for such relkind values anyway,
due to reltuples being -1 or 1, but that seems rather accidental, and
might get broken by improving reltuples estimates, etc. So better to
make the check explicit.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/951485.1672461744%40sss.pgh.pa.us
|
|
Also increase the allowed length of labels to 1000 characters
Garen Torikian
Discussion: https://postgr.es/m/CAGXsc+-mNg9Gc0rp-ER0sv+zkZSZp2wE9-LX6XcoWSLVz22tZA@mail.gmail.com
|
|
A comment was left behind referencing sample rate adjustment removed
from 8ad51b5f44. So clean that up. While at it also remove the sample
rate clamping which should not be necessary without the clamping, and
just check that with an assert.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/951485.1672461744%40sss.pgh.pa.us
|
|
Backpatch-through: 11
|
|
This is like the existing bt_page_stats() function, but it can
report on a range of pages rather than just one at a time.
I don't have a huge amount of faith in the portability of the
new test cases, but they do pass in a 32-bit FreeBSD VM here.
Further adjustment may be needed depending on buildfarm results.
Hamid Akhtar, reviewed by Naeem Akhter, Bertrand Drouvot,
Bharath Rupireddy, and myself
Discussion: https://postgr.es/m/CANugjht-=oGMRmNJKMqnBC69y7vr+wHDmm0ZK6-1pJsxoBKBbA@mail.gmail.com
|
|
When collecting ANALYZE sample on foreign tables, postgres_fdw fetched
all rows and performed the sampling locally. For large tables this means
transferring and immediately discarding large amounts of data.
This commit allows the sampling to be performed on the remote server,
transferring only the much smaller sample. The sampling is performed
using the built-in TABLESAMPLE methods (system, bernoulli) or random()
function, depending on the remote server version.
Remote sampling can be enabled by analyze_sampling on the foreign server
and/or foreign table, with supported values 'off', 'auto', 'system',
'bernoulli' and 'random'. The default value is 'auto' which uses either
'bernoulli' (TABLESAMPLE method) or 'random' (for remote servers without
TABLESAMPLE support).
|
|
This patch was changed as a result of review but one line didn't get the
message. Mea Culpa.
|
|
Reviewed by Tom Lane and Amul Sul
Discussion: https://postgr.es/m/[email protected]
|
|
Reviewed by Tom Lane and Amul Sul
Discussion: https://postgr.es/m/[email protected]
|
|
The error reporting here was not only old and crufty, but untested.
I took the opportunity to bring the messages into some sort of
compliance with our message style guidelines.
Discussion: https://postgr.es/m/[email protected]
|
|
|
|
|
|
Reviewed by Tom Lane
Discussion: https://postgr.es/m/[email protected]
|
|
Fix incorrect code which was trying to convert a Bitmapset of columns at
the attnums according to a parent table and transform them into the
equivalent Bitmapset with same attnums according to the given child table.
This code is new as of a61b1f748 and was failing to do the correct
translation when there was an intermediate parent table between 'rel' and
'top_parent_rel'.
Reported-by: Ranier Vilela
Author: Richard Guo, Amit Langote
Discussion: https://postgr.es/m/CAEudQArohfB_Gy%2BhcH2-bANUkxgjJiP%3DABq01_LgTNTbcNijag%40mail.gmail.com
|
|
seg stores the number of significant digits in an input number
in a "char" field. If char is signed, and the input is more than
127 digits long, the count can read out as negative causing
seg_out() to print garbage (or, if you're really unlucky,
even crash).
To fix, clamp the digit count to be not more than FLT_DIG.
(In theory this loses some information about what the original
input was, but it doesn't seem like useful information; it would
not survive dump/restore in any case.)
Also, in case there are stored values of the seg type containing
bad data, add a clamp in seg_out's restore() subroutine.
Per bug #17725 from Robins Tharakan. It's been like this
forever, so back-patch to all supported branches.
Discussion: https://postgr.es/m/[email protected]
|
|
This shaves some code by replacing the combinations of
CreateTemplateTupleDesc()/TupleDescInitEntry() hardcoding a mapping of
the attributes listed in pg_proc.dat by get_call_result_type() to build
the TupleDesc needed for the rows generated.
get_call_result_type() is more expensive than the former style, but this
removes some duplication with the lists of OUT parameters (pg_proc.dat
and the attributes hardcoded in these code paths). This is applied to
functions that are not considered as critical (aka that could be called
repeatedly for monitoring purposes).
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV23HW5HP5hFjd89FNS-z5X8r2jNXdMXcpN2BgTtKd87w@mail.gmail.com
|
|
Discussion: https://postgr.es/m/[email protected]
|
|
Commit 927f453a9 disallowed batching added by commit b663a4136 to be
used for the inserts performed as part of cross-partition updates of
partitioned tables, mainly because the previous code in
nodeModifyTable.c couldn't handle pending inserts into foreign-table
partitions that are also UPDATE target partitions. But we don't have
such a limitation anymore (cf. commit ffbb7e65a), so let's allow for
this by removing from execPartition.c the restriction added by commit
927f453a9 that batching is only allowed if the query command type is
CMD_INSERT.
In postgres_fdw, since commit 86dc90056 changed it to effectively
disable cross-partition updates in the case where a foreign-table
partition chosen to insert rows into is also an UPDATE target partition,
allow batching in the case where a foreign-table partition chosen to
do so is *not* also an UPDATE target partition. This is enabled by the
"batch_size" option added by commit b663a4136, which is disabled by
default.
This patch also adjusts the test case added by commit 927f453a9 to
confirm that the inserts performed as part of a cross-partition update
of a partitioned table indeed uses batching.
Amit Langote, reviewed and/or tested by Georgios Kokolatos, Zhihong Yu,
Bharath Rupireddy, Hou Zhijie, Vignesh C, and me.
Discussion: http://postgr.es/m/CA%2BHiwqH1Lz1yJmPs%3DaD-pzd_HLLynLHvq5iYeT9mB0bBV7oJ6w%40mail.gmail.com
|
|
Backpatch-through: master
|
|
When incremental sorts were added in v13 a 1.5x pessimism factor was added
to the cost modal. Seemingly this was done because the cost modal only
has an estimate of the total number of input rows and the number of
presorted groups. It assumes that the input rows will be evenly
distributed throughout the presorted groups. The 1.5x pessimism factor
was added to slightly reduce the likelihood of incremental sorts being
used in the hope to avoid performance regressions where an incremental
sort plan was picked and turned out slower due to a large skew in the
number of rows in the presorted groups.
An additional quirk with the path generation code meant that we could
consider both a sort and an incremental sort on paths with presorted keys.
This meant that with the pessimism factor, it was possible that we opted
to perform a sort rather than an incremental sort when the given path had
presorted keys.
Here we remove the 1.5x pessimism factor to allow incremental sorts to
have a fairer chance at being chosen against a full sort.
Previously we would generally create a sort path on the cheapest input
path (if that wasn't sorted already) and incremental sort paths on any
path which had presorted keys. This meant that if the cheapest input path
wasn't completely sorted but happened to have presorted keys, we would
create a full sort path *and* an incremental sort path on that input path.
Here we change this logic so that if there are presorted keys, we only
create an incremental sort path, and create sort paths only when a full
sort is required.
Both the removal of the cost pessimism factor and the changes made to the
path generation make it more likely that incremental sorts will now be
chosen. That, of course, as with teaching the planner any new tricks,
means an increased likelihood that the planner will perform an incremental
sort when it's not the best method. Our standard escape hatch for these
cases is an enable_* GUC. enable_incremental_sort already exists for
this.
This came out of a report by Pavel Luzanov where he mentioned that the
master branch was choosing to perform a Seq Scan -> Sort -> Group
Aggregate for his query with an ORDER BY aggregate function. The v15 plan
for his query performed an Index Scan -> Group Aggregate, of course, the
aggregate performed the final sort internally in nodeAgg.c for the
aggregate's ORDER BY. The ideal plan would have been to use the index,
which provided partially sorted input then use an incremental sort to
provide the aggregate with the sorted input. This was not being chosen
due to the pessimism in the incremental sort cost modal, so here we remove
that and rationalize the path generation so that sort and incremental sort
plans don't have to needlessly compete. We assume that it's senseless
to ever use a full sort on a given input path where an incremental sort
can be performed.
Reported-by: Pavel Luzanov
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/9f61ddbf-2989-1536-b31e-6459370a6baa%40postgrespro.ru
|
|
|
|
We chose a specific wording of the not-implemented errors for
pseudotype I/O functions and other cases where there's little
value in implementing input and/or output. gtsvectorin never
got that memo though, nor did most of contrib. Make these all
fall in line, mostly because I'm a neatnik but also to remove
unnecessary translatable strings.
gbtreekey_in needs a bit of extra love since it supports
multiple SQL types. Sadly, gbtreekey_out doesn't have the
ability to do that, but I think it's unreachable anyway.
Noted while surveying datatype input functions to see what we
have left to fix.
|
|
Pay down some ancient technical debt (dating to commit 022fd9966):
fix a couple of places in datetime parsing that were throwing
ereport's immediately instead of returning a DTERR code that could be
interpreted by DateTimeParseError. The reason for that was that there
was no mechanism for passing any auxiliary data (such as a zone name)
to DateTimeParseError, and these errors seemed to really need it.
Up to now it didn't matter that much just where the error got thrown,
but now we'd like to have a hard policy that datetime parse errors
get thrown from just the one place.
Hence, invent a "DateTimeErrorExtra" struct that can be used to
carry any extra values needed for specific DTERR codes. Perhaps
in the future somebody will be motivated to use this to improve
the specificity of other DateTimeParseError messages, but for now
just deal with the timezone-error cases.
This is on the way to making the datetime input functions report
parse errors softly; but it's really an independent change, so
commit separately.
Discussion: https://postgr.es/m/[email protected]
|
|
This patch converts the input functions for bool, int2, int4, int8,
float4, float8, numeric, and contrib/cube to the new soft-error style.
array_in and record_in are also converted. There's lots more to do,
but this is enough to provide proof-of-concept that the soft-error
API is usable, as well as reference examples for how to convert
input functions.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/[email protected]
|
|
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
|
|
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <[email protected]>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
|
